| Age | Commit message (Collapse) | Author |
|---|
|
This patch switches the P-125 quirk entry to use a composite quirk as the
P-125 supplies both MIDI and Audio like many of the other Yamaha
keyboards
Signed-off-by: Eryk Zagorski <erykzagorski@gmail.com>
Link: https://patch.msgid.link/20241111164520.9079-2-erykzagorski@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This allows exporting this high-level interface only while keeping
wbc_attach_and_unlock_inode private in fs-writeback.c and unexporting
__inode_attach_wb.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241112054403.1470586-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This shuts up a sparse lock context tracking warning.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241112054403.1470586-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
/proc/self/mountinfo prints out the sb->s_subtype after the type. This
is particularly useful for disambiguating FUSE mounts (at least when the
userland driver bothers to set it). Add STATMOUNT_FS_SUBTYPE and claim
one of the __spare2 fields to point to the offset into the str[] array.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ian Kent <raven@themaw.net>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241111-statmount-v4-2-2eaf35d07a80@kernel.org
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When one of the statmount_string() handlers doesn't emit anything to
seq, the kernel currently sets the corresponding flag and emits an empty
string.
Given that statmount() returns a mask of accessible fields, just leave
the bit unset in this case, and skip any NULL termination. If nothing
was emitted to the seq, then the EOVERFLOW and EAGAIN cases aren't
applicable and the function can just return immediately.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241111-statmount-v4-1-2eaf35d07a80@kernel.org
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The comment suggests a hash or array approach to
store the active requests. Currently it iterates
through all the active requests and when found
deletes the requested request, in the linked list.
However io_cancel() isn’t a frequently used operation,
and optimizing it wouldn’t bring a substantial benefit
to real users and the increased complexity of maintaining
a hashtable for this would be significant and will slow
down other operation. Therefore remove this TODO
to avoid people spending time improving this.
Signed-off-by: Mohammed Anees <pvmohammedanees2003@gmail.com>
Link: https://lore.kernel.org/r/20241112113906.15825-1-pvmohammedanees2003@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Devices block sizes may change. One of these cases is a loop device by
using ioctl LOOP_SET_BLOCK_SIZE.
While this may cause other issues like IO being rejected, in the case of
hfsplus, it will allocate a block by using that size and potentially write
out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the
latter function reads a different io_size.
Using a new min_io_size initally set to sb_min_blocksize works for the
purposes of the original fix, since it will be set to the max between
HFSPLUS_SECTOR_SIZE and the first seen logical block size. We still use the
max between HFSPLUS_SECTOR_SIZE and min_io_size in case the latter is not
initialized.
Tested by mounting an hfsplus filesystem with loop block sizes 512, 1024
and 4096.
The produced KASAN report before the fix looks like this:
[ 419.944641] ==================================================================
[ 419.945655] BUG: KASAN: slab-use-after-free in hfsplus_read_wrapper+0x659/0xa0a
[ 419.946703] Read of size 2 at addr ffff88800721fc00 by task repro/10678
[ 419.947612]
[ 419.947846] CPU: 0 UID: 0 PID: 10678 Comm: repro Not tainted 6.12.0-rc5-00008-gdf56e0f2f3ca #84
[ 419.949007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 419.950035] Call Trace:
[ 419.950384] <TASK>
[ 419.950676] dump_stack_lvl+0x57/0x78
[ 419.951212] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.951830] print_report+0x14c/0x49e
[ 419.952361] ? __virt_addr_valid+0x267/0x278
[ 419.952979] ? kmem_cache_debug_flags+0xc/0x1d
[ 419.953561] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.954231] kasan_report+0x89/0xb0
[ 419.954748] ? hfsplus_read_wrapper+0x659/0xa0a
[ 419.955367] hfsplus_read_wrapper+0x659/0xa0a
[ 419.955948] ? __pfx_hfsplus_read_wrapper+0x10/0x10
[ 419.956618] ? do_raw_spin_unlock+0x59/0x1a9
[ 419.957214] ? _raw_spin_unlock+0x1a/0x2e
[ 419.957772] hfsplus_fill_super+0x348/0x1590
[ 419.958355] ? hlock_class+0x4c/0x109
[ 419.958867] ? __pfx_hfsplus_fill_super+0x10/0x10
[ 419.959499] ? __pfx_string+0x10/0x10
[ 419.960006] ? lock_acquire+0x3e2/0x454
[ 419.960532] ? bdev_name.constprop.0+0xce/0x243
[ 419.961129] ? __pfx_bdev_name.constprop.0+0x10/0x10
[ 419.961799] ? pointer+0x3f0/0x62f
[ 419.962277] ? __pfx_pointer+0x10/0x10
[ 419.962761] ? vsnprintf+0x6c4/0xfba
[ 419.963178] ? __pfx_vsnprintf+0x10/0x10
[ 419.963621] ? setup_bdev_super+0x376/0x3b3
[ 419.964029] ? snprintf+0x9d/0xd2
[ 419.964344] ? __pfx_snprintf+0x10/0x10
[ 419.964675] ? lock_acquired+0x45c/0x5e9
[ 419.965016] ? set_blocksize+0x139/0x1c1
[ 419.965381] ? sb_set_blocksize+0x6d/0xae
[ 419.965742] ? __pfx_hfsplus_fill_super+0x10/0x10
[ 419.966179] mount_bdev+0x12f/0x1bf
[ 419.966512] ? __pfx_mount_bdev+0x10/0x10
[ 419.966886] ? vfs_parse_fs_string+0xce/0x111
[ 419.967293] ? __pfx_vfs_parse_fs_string+0x10/0x10
[ 419.967702] ? __pfx_hfsplus_mount+0x10/0x10
[ 419.968073] legacy_get_tree+0x104/0x178
[ 419.968414] vfs_get_tree+0x86/0x296
[ 419.968751] path_mount+0xba3/0xd0b
[ 419.969157] ? __pfx_path_mount+0x10/0x10
[ 419.969594] ? kmem_cache_free+0x1e2/0x260
[ 419.970311] do_mount+0x99/0xe0
[ 419.970630] ? __pfx_do_mount+0x10/0x10
[ 419.971008] __do_sys_mount+0x199/0x1c9
[ 419.971397] do_syscall_64+0xd0/0x135
[ 419.971761] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 419.972233] RIP: 0033:0x7c3cb812972e
[ 419.972564] Code: 48 8b 0d f5 46 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c2 46 0d 00 f7 d8 64 89 01 48
[ 419.974371] RSP: 002b:00007ffe30632548 EFLAGS: 00000286 ORIG_RAX: 00000000000000a5
[ 419.975048] RAX: ffffffffffffffda RBX: 00007ffe306328d8 RCX: 00007c3cb812972e
[ 419.975701] RDX: 0000000020000000 RSI: 0000000020000c80 RDI: 00007ffe306325d0
[ 419.976363] RBP: 00007ffe30632720 R08: 00007ffe30632610 R09: 0000000000000000
[ 419.977034] R10: 0000000000200008 R11: 0000000000000286 R12: 0000000000000000
[ 419.977713] R13: 00007ffe306328e8 R14: 00005a0eb298bc68 R15: 00007c3cb8356000
[ 419.978375] </TASK>
[ 419.978589]
Fixes: 6596528e391a ("hfsplus: ensure bio requests are not smaller than the hardware sectors")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20241107114109.839253-1-cascardo@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add coverage for FPMR to fp-ptrace. FPMR can be available independently of
SVE and SME, if SME is supported then FPMR is cleared by entering and
exiting streaming mode. As with other registers we generate random values
to load into the register, we restrict these to bitfields which are always
defined. We also leave bitfields where the valid values are affected by
the set of supported FP8 formats zero to reduce complexity, it is unlikely
that specific bitfields will be affected by ptrace issues.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-3-250b57c61254@kernel.org
[catalin.marinas@arm.com: use REG_FPMR instead of FPMR]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently our test for implementable ZA writes is written in a bit of a
convoluted fashion which excludes all changes where we clear SVCR.SM even
though we can actually support that since changing the vector length resets
SVCR. Make the logic more direct, enabling us to actually run these cases.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-2-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The assembler portions of fp-ptrace are passed feature flags by the C code
indicating which architectural features are supported. Currently these use
an entire register for each flag which is wasteful and gets cumbersome as
new flags are added. Switch to using flag bits in a single register to make
things easier to maintain.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't build the PAC selftests when building with LLVM=1 since
we attempt to test for PAC support in the toolchain before we've set up the
build system to point at LLVM in lib.mk, which has to be one of the last
things in the Makefile.
Since all versions of LLVM supported for use with the kernel have PAC
support we can just sidestep the issue by just assuming PAC is there when
doing a LLVM=1 build.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-selftest-pac-clang-v1-1-08599ceee418@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We don't currently validate that we exit streaming mode and clear ZA when
we enter a signal handler. Add simple checks for this in the SSVE and ZA
tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org
[catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241112-asoc-max9768-event-v1-1-ba5d50599787@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The filechk macro always executes the syscalltbl script (and discards
the output if there are no changes).
Using if_changed is more efficient because it avoids running the script
when the target is up-to-date and the command remains unchanged.
All other architectures use if_changed for generating syscall headers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-3-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The filechk_syshdr macro receives $@ in both cases, making the argument
redundant.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-2-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Building the kernel with ARCH=s390 creates a weird arch/arch/ directory.
$ find arch/arch
arch/arch
arch/arch/s390
arch/arch/s390/include
arch/arch/s390/include/generated
arch/arch/s390/include/generated/asm
arch/arch/s390/include/generated/uapi
arch/arch/s390/include/generated/uapi/asm
The root cause is 'targets' in arch/s390/kernel/syscalls/Makefile,
where the relative path is incorrect.
Strictly speaking, 'targets' was not necessary in the first place
because this Makefile uses 'filechk' instead of 'if_changed'.
However, this commit keeps it, as it will be useful when converting
'filechk' to 'if_changed' later.
Fixes: 5c75824d915e ("s390/syscalls: add Makefile to generate system call header files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20241111134603.2063226-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert local64_cmpxchg() usages to local64_try_cmpxchg() in
order to generate slightly better code.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert cmpxchg128() usages to try_cmpxchg128() in order to generate
slightly better code.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With users converted to the standard arch_cmpxchg() variants, remove
the now unused __atomic_cmpxchg() and __atomic_cmpxchg_bool() variants.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use arch_try_cmpxchg() instead of __atomic_cmpxchg_bool() everywhere.
This generates the same code like before, but uses the standard
cmpxchg() implementation instead of a custom __atomic_cmpxchg_bool().
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use arch_try_cmpxchg() instead of __atomic_cmpxchg() in
preempt_count_set() to generate similar or better code,
depending in compiler features.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since gcc 14 flag output operands are supported also for s390.
Provide an arch_atomic try_cmpxchg() implementation so that all
existing atomic_try_cmpxchg() usages generate slightly better code,
if compiled with gcc 14 or newer.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use arch_cmpxchg() instead of __atomic_cmpxchg() for the
arch_atomic_cmpxchg() implementations. arch_cmpxchg() generates
the same code and doesn't need a cast like it is required for
arch_atomic64_cmpxchg().
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Convert the arch_atomic_xchg define to a C function so that proper
type checking is provided.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since gcc 14 flag output operands are supported also for s390.
Provide an arch_try_cmpxchg128() implementation so that all existing
try_cmpxchg128() variants provide slightly better code, if compiled
with gcc 14 or newer.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Just like x86 and arm64 provide a trivial arch_cmpxchg128_local()
implementation by mapping it to arch_cmpxchg128().
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of the arch_xchg() inline assemblies by converting the inline
assemblies to C functions which make use of arch_try_cmpxchg().
With flag output operand support the generated code is at least as good as
the previous version. Without it is slightly worse, however getting rid of
all the inline assembly code is worth it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since gcc 14 flag output operands are supported also for s390.
Provide an arch_try_cmpxchg() implementation so that all existing
try_cmpxchg() variants provide slightly better code, if compiled
with gcc 14 or newer.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Rewrite __cmpxchg() in order to get rid of the large inline
assemblies. Convert the one and two byte inline assemblies to
C functions.
The generated code of the new implementation is nearly as good or bad as
the old variant, but easier to read.
Note that the new variants are quite close to the generic cmpxchg_emu_u8()
implementation, however a conversion to the generic variant will not follow
since with mm/vmstat.c there is heavy user of one byte cmpxchg(). A not
inlined variant would have a negative performance impact.
Also note that the calls within __arch_cmpxchg() come with rather pointless
"& 0xff..." operations. They exist only to avoid false positive sparse
warnings like "warning: cast truncates bits from constant value ...".
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Dump tools from s390-tools such as zipl need to know the correct dump area
size of the machine they run on in order to be able to create valid
standalone dumper images. Therefore, allow it to be obtained through
the new sysfs read-only attribute /sys/firmware/dump/dump_area_size.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Get rid of sparse warnings:
CHECK drivers/s390/char/con3270.c
drivers/s390/char/con3270.c:531:15: warning: Using plain integer as NULL pointer
drivers/s390/char/con3270.c:749:15: warning: Using plain integer as NULL pointer
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Michal Luczaj says:
====================
virtio/vsock: Fix memory leaks
Short series fixing some memory leaks that I've stumbled upon while toying
with the selftests.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241107-vsock-mem-leaks-v2-0-4e21bfcfc818@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing kfree_skb() to prevent memory leaks.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kernel queues MSG_ZEROCOPY completion notifications on the error queue.
Where they remain, until explicitly recv()ed. To prevent memory leaks,
clean up the queue when the socket is destroyed.
unreferenced object 0xffff8881028beb00 (size 224):
comm "vsock_test", pid 1218, jiffies 4294694897
hex dump (first 32 bytes):
90 b0 21 17 81 88 ff ff 90 b0 21 17 81 88 ff ff ..!.......!.....
00 00 00 00 00 00 00 00 00 b0 21 17 81 88 ff ff ..........!.....
backtrace (crc 6c7031ca):
[<ffffffff81418ef7>] kmem_cache_alloc_node_noprof+0x2f7/0x370
[<ffffffff81d35882>] __alloc_skb+0x132/0x180
[<ffffffff81d2d32b>] sock_omalloc+0x4b/0x80
[<ffffffff81d3a8ae>] msg_zerocopy_realloc+0x9e/0x240
[<ffffffff81fe5cb2>] virtio_transport_send_pkt_info+0x412/0x4c0
[<ffffffff81fe6183>] virtio_transport_stream_enqueue+0x43/0x50
[<ffffffff81fe0813>] vsock_connectible_sendmsg+0x373/0x450
[<ffffffff81d233d5>] ____sys_sendmsg+0x365/0x3a0
[<ffffffff81d246f4>] ___sys_sendmsg+0x84/0xd0
[<ffffffff81d26f47>] __sys_sendmsg+0x47/0x80
[<ffffffff820d3df3>] do_syscall_64+0x93/0x180
[<ffffffff8220012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d58efa ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fix dtbs_check errors in following files:
arch/arm64/boot/dts/marvell/armada-7040-db.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-db.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: sata@540000:
arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dtb: sata@540000:
Unevaluated properties are not allowed ('iommus' was unexpected)
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241109094623.37518-4-linux@fw-web.de
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Remove unnecessary CONFIG_NUMA #ifdef around numa_add_cpu() since the
function is already properly handled in <asm/numa.h> for both NUMA and
non-NUMA configurations. For !CONFIG_NUMA builds, numa_add_cpu() is
defined as an empty function.
Simplify the code without any functionality change.
Testing: Build CONFIG_NUMA=n
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241112072346.428623-1-shivankg@amd.com
|
|
Grab the intel_display from 'encoder' rather than 'state'
in the encoder hooks to avoid the massive footgun that is
intel_sanitize_encoder(), which passes NULL as the 'state'
argument to encoder .disable() and .post_disable().
TODO: figure out how to actually fix intel_sanitize_encoder()...
Fixes: ab0b0eb5c85c ("drm/i915/tv: convert to struct intel_display")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107161123.16269-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit dc3806d9eb66d0105f8d55d462d4ef681d9eac59)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
This runs on extents that haven't yet been validated, so we don't want
to assert that we have a valid entry type.
Reported-by: syzbot+4f29c3f12f864d8a8d17@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the jset_entry_dev_usage is malformed, and too small, our nr_entries
calculation will be incorrect - just bail out.
Reported-by: syzbot+05d7520be047c9be86e0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Native IPI is used for AP booting, because it is the booting interface
between OS and BIOS firmware. The paravirt IPI is only used inside OS,
and native IPI is necessary to boot AP.
When booting AP, we write the kernel entry address in the HW mailbox of
AP and send IPI interrupt to it. AP executes idle instruction and waits
for interrupts or SW events, then clears IPI interrupt and jumps to the
kernel entry from HW mailbox.
Between writing HW mailbox and sending IPI, AP can be woken up by SW
events and jumps to the kernel entry, so ACTION_BOOT_CPU IPI interrupt
will keep pending during AP booting. And native IPI interrupt handler
needs be registered so that it can clear pending native IPI, else there
will be endless interrupts during AP booting stage.
Here native IPI interrupt is initialized even if paravirt IPI is used.
Cc: stable@vger.kernel.org
Fixes: 74c16b2e2b0c ("LoongArch: KVM: Add PV IPI support on guest side")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, the kernel couldn't boot when ARCH_IOREMAP, ARCH_WRITECOMBINE
and KASAN are enabled together. Because DMW2 is used by kernel now which
is configured as 0xa000000000000000 for WriteCombine, but KASAN has no
segment mapping for it. This patch fix this issue.
Solution: Add the relevant definitions for WriteCombine (DMW2) in KASAN.
Cc: stable@vger.kernel.org
Fixes: 8e02c3b782ec ("LoongArch: Add writecombine support for DMW-based ioremap()")
Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
overflow UINTPTR_MAX because KASAN_SHADOW_START/KASAN_SHADOW_END are
aligned up by PGDIR_SIZE. And then the overflowed KASAN_SHADOW_END looks
like a user space address.
For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too large
for Loongson-2K series whose cpu_vabits = 39.
Since CONFIG_4KB_4LEVEL is completely legal for CPUs with cpu_vabits <=
39, we just disable KASAN via early return in kasan_init(). Otherwise we
get a boot failure.
Moreover, we change KASAN_SHADOW_END from the first address after KASAN
shadow area to the last address in KASAN shadow area, in order to avoid
the end address exactly overflow to 0 (which is a legal case). We don't
need to worry about alignment because pgd_addr_end() can handle it.
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Make KASAN work with 5-level page-tables, including:
1. Implement and use __pgd_none() and kasan_p4d_offset().
2. As done in kasan_pmd_populate() and kasan_pte_populate(), restrict
the loop conditions of kasan_p4d_populate() and kasan_pud_populate()
to avoid unnecessary population.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is a trivial cleanup, commit c62da0c35d58518d ("mm/vma: define a
default value for VM_DATA_DEFAULT_FLAGS") has unified default values of
VM_DATA_DEFAULT_FLAGS across different platforms.
Apply the same consistency to LoongArch.
Suggested-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
early_numa_add_cpu() applies on physical CPU id rather than logical CPU
id, so use cpuid instead of cpu.
Cc: stable@vger.kernel.org
Fixes: 3de9c42d02a79a5 ("LoongArch: Add all CPUs enabled by fdt to NUMA node 0")
Reported-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In order to support ACPI-based physical CPU hotplug, we suppose for all
"possible" CPUs cpu_logical_map() can work. Because some drivers want to
use cpu_logical_map() for all "possible" CPUs, while currently we only
setup logical-physical mapping for "present" CPUs. This lack of mapping
also causes cpu_to_node() cannot work for hot-added CPUs.
All "possible" CPUs are listed in MADT, and the "present" subset is
marked as ACPI_MADT_ENABLED. To setup logical-physical CPU mapping for
all possible CPUs and keep present CPUs continuous in cpu_present_mask,
we parse MADT twice. The first pass handles CPUs with ACPI_MADT_ENABLED
and the second pass handles CPUs without ACPI_MADT_ENABLED.
The global flag (cpu_enumerated) is removed because acpi_map_cpu() calls
cpu_number_map() rather than set_processor_mask() now.
Reported-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
All MTL and ARL SKUs share the same GSC FW, but the newer platforms are
only supported in newer blobs. In particular, ARL-S is supported
starting from 102.0.10.1878 (which is already the minimum required
version for ARL in the code), while ARL-H and ARL-U are supported from
102.1.15.1926. Therefore, the driver needs to check which specific ARL
subplatform its running on when verifying that the GSC FW is new enough
for it.
Fixes: 2955ae8186c8 ("drm/i915: ARL requires a newer GSC firmware")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241028233132.149745-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 3c1d5ced18db8a67251c8436cf9bdc061f972bdb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2024-11-07
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/20241107183527.676877-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In Multi-PF (Socket Direct) configurations, when a loopback packet is
sent through one of the secondary devices, it will always be received
on the primary device. This causes the loopback layer to fail in
identifying the loopback packet as the devices are different.
To avoid false test failures, disable the loopback self-test in
Multi-PF configurations.
Fixes: ed29705e4ed1 ("net/mlx5: Enable SD feature")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
