summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-24perf tools: Remove string.h, unistd.h and sys/stat.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need FILE, putchar(), access() and a few other prototypes. Link: http://lkml.kernel.org/n/tip-xxtdsl6nsna82j7puwbdjqhs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove stale prototypes from builtin.hArnaldo Carvalho de Melo
Some, like prune_packed_objects() are clearly git specific, others don't have implementations and some are used in just one place, make them static. Link: http://lkml.kernel.org/n/tip-faj3c5dnttf3hurv4pujut8n@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove string.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need strdup, strcmp and a few other prototypes. Link: http://lkml.kernel.org/n/tip-t24yy85xnlv55kyosrum2ubs@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove sys/ioctl.h from util.hArnaldo Carvalho de Melo
Not needed in this header, added to the places that need 'struct winsize' and the ioctl defines. Link: http://lkml.kernel.org/n/tip-2pznlli3146y4242otlcm70m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Remove a few more needless includes from util.hArnaldo Carvalho de Melo
Link: http://lkml.kernel.org/n/tip-sb2zu21d6h42e5qnsrtl6wuu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf tools: Include sys/param.h where neededArnaldo Carvalho de Melo
As it is going away from util.h, where it is not needed. This is mostly for things like MAXPATHLEN, MAX() and MIN(), these later two probably should go away in favor of its kernel sources replacements. Link: http://lkml.kernel.org/n/tip-z1666f3fl3fqobxvjr5o2r39@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf callchain: Move callchain specific routines from util.[ch]Arnaldo Carvalho de Melo
Where they belong, no point in leaving those in the generic "util" files. Link: http://lkml.kernel.org/n/tip-ljx3iiip1hlfa7a7apjem7ph@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24mdio_bus: Issue GPIO RESET to PHYs.Roger Quadros
Some boards [1] leave the PHYs at an invalid state during system power-up or reset thus causing unreliability issues with the PHY which manifests as PHY not being detected or link not functional. To fix this, these PHYs need to be RESET via a GPIO connected to the PHY's RESET pin. Some boards have a single GPIO controlling the PHY RESET pin of all PHYs on the bus whereas some others have separate GPIOs controlling individual PHY RESETs. In both cases, the RESET de-assertion cannot be done in the PHY driver as the PHY will not probe till its reset is de-asserted. So do the RESET de-assertion in the MDIO bus driver. [1] - am572x-idk, am571x-idk, a437x-idk Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net: tc35815: move free after the dereferenceDan Carpenter
We dereference "skb" to get "skb->len" so we should probably do that step before freeing the skb. Fixes: eea221ce4880 ("tc35815 driver update (take 2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge branch 'VSOCK-add-vsockmon'David S. Miller
Stefan Hajnoczi says: ==================== VSOCK: vsockmon virtual device to monitor AF_VSOCK sockets. v5: * Change vsock_deliver_tap() API to avoid unnecessary skb creation [Jorgen] * Fix skb leak when no taps are registered [Jorgen] * s/cpu_to_le16(pkt->hdr.op)/le16_to_cpu(pkt->hdr.op)/ [Michael] * Add af_vsock_tap.c and vsockmon.[ch] to MAINTAINERS * checkpatch.pl and sparse fixes v4: * Add explicit reserved padding field to struct af_vsockmon_hdr and drop __attribute__((packed)) [Michael, DaveM] * Call synchronize_net() before module_put() [Michael] v3: * Hook virtio_transport.c (guest driver), not just drivers/vhost/vsock.c (host driver) * Fix DEFAULT_MTU macro definition [Zhu Yanjun] * Rename af_vsockmon_hdr->t field ->transport for clarity * Update .ndo_get_stats64() return type since it has changed * Include missing <linux/module.h> header in af_vsock_tap.c This is a continuation of Gerard Garcia's work on the vsockmon packet capture interface for AF_VSOCK. Packet capture is an essential feature for network communication. Gerard began addressing this feature gap in his Google Summer of Code 2016 project. I have cleaned up, rebased, and retested the v2 series he posted previously. The design follows the nlmon packet capture interface closely. This is because vsock has the same problem as netlink: there is no netdev on which packets can be captured. The nlmon driver is a synthetic netdev purely for the purpose of enabling packet capture. We follow the same approach here with vsockmon. See include/uapi/linux/vsockmon.h in this series for details on the packet layout. How to try it: 1. Build tcpdump with vsockmon patches: $ git clone -b vsock https://github.com/stefanha/libpcap $ (cd libcap && ./configure && make) $ git clone -b vsock https://github.com/stefanha/tcpdump $ (cd tcpdump && ./configure && make) 2. Build nc-vsock (a netcat-like tool): $ git clone https://github.com/stefanha/nc-vsock $ (cd nc-vsock && make) 3. Launch a virtual machine: # modprobe vhost_vsock # qemu-system-x86_64 -M accel=kvm -m 1024 -cpu host \ -drive if=virtio,file=test.img,format=raw \ -device vhost-vsock-pci,guest-cid=3 (Assumes guest is running a kernel with this patch) 4. Capture AF_VSOCK traffic in guest and/or host: # modprobe vsockmon # ip link add type vsockmon # ip link set vsockmon0 up # tcpdump -i vsockmon0 -vvv 5. Communicate! (host)$ nc-vsock -l 1234 (guest)$ nc-vsock 2 1234 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24VSOCK: Add virtio vsock vsockmon hooksGerard Garcia
The virtio drivers deal with struct virtio_vsock_pkt. Add virtio_transport_deliver_tap_pkt(pkt) for handing packets to the vsockmon device. We call virtio_transport_deliver_tap_pkt(pkt) from net/vmw_vsock/virtio_transport.c and drivers/vhost/vsock.c instead of common code. This is because the drivers may drop packets before handing them to common code - we still want to capture them. Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24VSOCK: Add vsockmon deviceGerard Garcia
Add vsockmon virtual network device that receives packets from the vsock transports and exposes them to user space. Based on the nlmon device. Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24VSOCK: Add vsockmon tap functionsGerard Garcia
Add tap functions that can be used by the vsock transports to deliver packets to vsockmon virtual network devices. Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24pinctrl: tegra: xusb: Silence sparse warningsThierry Reding
Commit 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") added a new driver for the XUSB pad controller that implements a more flexible devicetree binding. In order to preserve backwards compatibility the old driver can be probed if the obsolete bindings are detected. In order to hide the legacy code, these prototypes were defined in a header private to the new driver. This has the disadvantage of making the sparse code checker complain about the missing declarations when compiling the old driver and suggesting to make the functions static. Avoid these sparse warnings by adding local prototype declarations into the compatibility driver. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24Merge tag 'sh-pfc-for-v4.12-tag3' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.12 (take three) - Miscellaneous fixes for R-Car M2-W and R-Car E2.
2017-04-24ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> ↵Colin Ian King
"controller" trivial fix to spelling mistake in documentation Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: DT bindings, move tca9554 from pcf857x to pca953xAnders Darander
The TCA9554 is similar to the PCA9554. Update the DT binding docs. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: move tca9554 from pcf857x to pca953xAnders Darander
The TCA9554 doesn't work with the pcf857x driver, trying to change the direction gives a NAK bailout error. TCA9554 is similar to the PCA9554, thus change the driver. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24Merge tag 'wireless-drivers-next-for-davem-2017-04-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Quite a lot of patches for rtlwifi and iwlwifi this time, but changes also for other active wireless drivers. Major changes: ath9k * add support for Dell Wireless 1601 PCI device * add debugfs file to manually override noise floor ath10k * bump up FW API to 6 for a new QCA6174 firmware branch wil6210 * support 8 kB RX buffers iwlwifi * work to support A000 devices continues * add support for FW API 30 * add Geographical and Dynamic Specific Absorption Rate (SAR) support * support a few new PCI device IDs rtlwifi * work on adding Bluetooth coexistance support, not finished yet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24Merge branch 'qed-dcb-enhancements'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed*: Dcbx/dcbnl enhancements. The series has set of enhancements for dcbx/dcbnl implementation of qed/qede drivers. - Patches (1) & (3) capture the sematic and debug changes. - Patch (2) adds the driver support for populating RoCEv2 dcb data. - Patch (4) adds the required support for reading/configuring the IEEE selection field (SF). - Patch (5) adds the support for configuring the static dcbx mode. Please consider applying this to 'net-next' branch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24qed: Add support for static dcbx.sudarsana.kalluru@cavium.com
The patch adds driver support for static/local dcbx mode. In this mode adapter brings up the dcbx link with locally configured parameters instead of performing the dcbx negotiation with the peer. The feature is useful when peer device/switch doesn't support dcbx. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24qed: Support dcbnl IEEE selector field.sudarsana.kalluru@cavium.com
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24qed: Add additional DCBx debug messages.sudarsana.kalluru@cavium.com
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24qed: Separate RoCE DCBx support for V2.sudarsana.kalluru@cavium.com
In the older firmware there was no distinction between RoCE and RoCEv2 whereas the newer firmware (8.15.3.0) allows us to configure each independently. Driver need to populate the RoCEv2 data in its specific structure. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24qed: Cleanup DCBx unnecessary parameters.sudarsana.kalluru@cavium.com
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24net/mlx5e: Fix race in mlx5e_sw_stats and mlx5e_vport_statsMartin KaFai Lau
We have observed a sudden spike in rx/tx_packets and rx/tx_bytes reported under /proc/net/dev. There is a race in mlx5e_update_stats() and some of the get-stats functions (the one that we hit is the mlx5e_get_stats() which is called by ndo_get_stats64()). In particular, the very first thing mlx5e_update_sw_counters() does is 'memset(s, 0, sizeof(*s))'. For example, if mlx5e_get_stats() is unlucky at one point, rx_bytes and rx_packets could be 0. One second later, a normal (and much bigger than 0) value will be reported. This patch is to use a 'struct mlx5e_sw_stats temp' to avoid a direct memset zero on priv->stats.sw. mlx5e_update_vport_counters() has a similar race. Hence, addressed together. However, memset zero is removed instead because it is not needed. I am lucky enough to catch this 0-reset in rx multicast: eth0: 41457665 76804 70 0 0 70 0 47085 15586634 87502 3 0 0 0 3 0 eth0: 41459860 76815 70 0 0 70 0 47094 15588376 87516 3 0 0 0 3 0 eth0: 41460577 76822 70 0 0 70 0 0 15589083 87521 3 0 0 0 3 0 eth0: 41463293 76838 70 0 0 70 0 47108 15595872 87538 3 0 0 0 3 0 eth0: 41463379 76839 70 0 0 70 0 47116 15596138 87539 3 0 0 0 3 0 v2: Remove memset zero from mlx5e_update_vport_counters() v1: Use temp and memcpy Fixes: 9218b44dcc05 ("net/mlx5e: Statistics handling refactoring") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24dm: remove dummy dm_table definitionMikulas Patocka
This dummy structure definition was required for RCU macros, but it isn't required anymore, so delete it. The dummy definition confuses the crash tool, see: https://www.redhat.com/archives/dm-devel/2017-April/msg00197.html Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm crypt: fix large block integrity supportMikulas Patocka
Previously, dm-crypt could use blocks composed of multiple 512b sectors but it created integrity profile for each 512b sector (it padded it with zeroes). Fix dm-crypt so that the integrity profile is sent for each block not each sector. The user must use the same block size in the DM crypt and integrity targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm integrity: support larger block sizesMikulas Patocka
The DM integrity block size can now be 512, 1k, 2k or 4k. Using larger blocks reduces metadata handling overhead. The block size can be configured at table load time using the "block_size:<value>" option; where <value> is expressed in bytes (defult is still 512 bytes). It is safe to use larger block sizes with DM integrity, because the DM integrity journal makes sure that the whole block is updated atomically even if the underlying device doesn't support atomic writes of that size (e.g. 4k block ontop of a 512b device). Depends-on: 2859323e ("block: fix blk_integrity_register to use template's interval_exp if not 0") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm integrity: various small changes and cleanupsMikulas Patocka
Some coding style changes. Fix a bug that the array test_tag has insufficient size if the digest size of internal has is bigger than the tag size. The function __fls is undefined for zero argument, this patch fixes undefined behavior if the user sets zero interleave_sectors. Fix the limit of optional arguments to 8. Don't allocate crypt_data on the stack to avoid a BUG with debug kernel. Rename all optional argument names to have underscores rather than dashes. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm: mark targets that pass integrity dataMikulas Patocka
A dm-crypt on dm-integrity device incorrectly advertises an integrity profile on the DM crypt device. It can be seen in the files "/sys/block/dm-*/integrity/*" that both dm-integrity and dm-crypt target advertise the integrity profile. That is incorrect, only the dm-integrity target should advertise the integrity profile. A general problem in DM is that if we have a DM device that depends on another device with an integrity profile, the upper device will always advertise the integrity profile, even when the target driver doesn't support handling integrity data. Most targets don't support integrity data, so we provide a whitelist of targets that support it (linear, delay and striped). The targets that support passing integrity data to the lower device are marked with the flag DM_TARGET_PASSES_INTEGRITY. The DM core will now advertise integrity data on a DM device only if all the targets support the integrity data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm table: replace while loops with for loopsMikulas Patocka
Also remove some unnecessary use of uninitialized_var(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-04-20 This series contains updates to e1000, e1000e, igb/vf and ixgb. Tobias Klauser cleans up e1000, ixgb and igbvf from having a local function or structure for netdev stats. Bernd Faust fixes an issue for 82579 devices, where the clock frequency was being incorrectly set for these devices. These devices only support 96MHz, so make sure they are set to use only that. Yury Kylulin extends the work Jake and Alex did for ixgbe in MAC filter handling into the igb driver. Kim Tatt Chuah enables igb to wake up by packet and to read the necessary Wake Up Status (WUS) and Wake Up Packet Memory (WUPM) registers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24perf tools: Add compress.h for the *_decompress_to_file() headersArnaldo Carvalho de Melo
Out of util.h, the implementations were already in separate files, that are built conditionally. Link: http://lkml.kernel.org/n/tip-0ur7szxsb59f8758kfe63prb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf mem: Fix display of data source snoop indicationAndi Kleen
'perf mem report' doesn't display the data source snoop indication correctly. In the kernel API the definition is: #define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ #define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */ #define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */ but the table used by the perf tools exchanged "Hit" and "Miss": "None", "Miss", "Hit", Fix the table in perf. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20170419174940.13641-1-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf debug: Move dump_stack() and sighandler_dump_stack() to debug.hArnaldo Carvalho de Melo
Two more out of util.h. Link: http://lkml.kernel.org/n/tip-polkuxm1cpr06lbgue5pyqum@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24perf kvm: Make function only used by 'perf kvm' staticArnaldo Carvalho de Melo
No need to have this polluting util.h, it was polluted enough already. Link: http://lkml.kernel.org/n/tip-wfdidqlwbvi5y0s61kv6z2gn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-24ext4: Improve comments in ext4_quota_{on|off}()Jan Kara
Improve comments in ext4_quota_{on|off}() to explain that returning success despite ext4_journal_start() failing is deliberate. Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-24fsnotify: remove a stray unlockDan Carpenter
We recently shifted this code around, so we're no longer holding the lock on this path. Fixes: 755b5bc681eb ("fsnotify: Remove indirection from mark list addition") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-24pinctrl: make artpec6 explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_ARTPEC6 drivers/pinctrl/Kconfig: bool "Axis ARTPEC-6 pin controller driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Lars Persson <lars.persson@axis.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: linux-arm-kernel@axis.com Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24udf: use kmap_atomic for memcpy copyingFabian Frederick
Use temporary mapping for memory copying operations. To avoid any sleeping problem, mark_inode_dirty(inode) was moved after kunmap() in udf_adinicb_readpage() down_write(&iinfo->i_data_sem) set before kmap_atomic() in udf_expand_file_adinicb() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-24udf: use octal for permissionsFabian Frederick
According to commit f90774e1fd27 ("checkpatch: look for symbolic permissions and suggest octal instead") Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-24gpio: arizona: Correct check whether the pin is an inputCharles Keepax
The logic to check if the pin is an input or output whilst testing if we need to read the register value from the hardware or not is currently inverted. Remove the erroneous not from the if statement. Fixes: 11598d174050 ("gpio: arizona: Correct handling for reading input GPIOs") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: Add XRA1403 DTS binding documentationNandor Han
Add the XRA1403 DTS binding documentation. Signed-off-by: Nandor Han <nandor.han@ge.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macroRahul Bedarkar
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro. Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-24dt-bindings: add exar to vendor prefixes listNandor Han
Add Exar Corporation to vendors list. Signed-off-by: Nandor Han <nandor.han@ge.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: gpio-wcove: fix irq pending status bit widthKuppuswamy Sathyanarayanan
Whiskey cove PMIC has three GPIO banks with total number of 13 GPIO pins. But when checking for the pending status, for_each_set_bit() uses bit width of 7 and hence it only checks the status for first 7 GPIO pins missing to check/clear the status of rest of the GPIO pins. This patch fixes this issue. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: dwapb: use dwapb_read instead of readl_relaxedJisheng Zhang
Commit 67809b974a07 ("GPIO: gpio-dwapb: Change readl&writel to dwapb_read&dwapb_write") missed this readl_relaxed() usage, I'm not sure the reason, maybe for performance reason? But if we do care the performance, we could use the relaxed io in dwapb_read and dwapb_write. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: aspeed: g5: Add pinconf supportAndrew Jeffery
Testing for pinctrl-aspeed-g5 was performed on an AST2500EVB system, using the strategy outlined in the commit message for the change to the Aspeed pinctrl core. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: aspeed: g4: Add pinconf supportAndrew Jeffery
Testing for pinctrl-aspeed-g4 was performed on an OpenPOWER Palmetto system, using the strategy outlined in the commit message for the change to the Aspeed pinctrl core. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-24 11:24:30 +0000