summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-09PCI: dw-rockchip: Refactor the driver to prepare for EP modeNiklas Cassel
Refactor the driver to prepare for EP mode. Add of-match data to the existing compatible, and explicitly define it as DW_PCIE_RC_TYPE. This way, we will be able to add EP mode in a follow-up commit in a much less intrusive way, which makes the follow-up commit much easier to review. No functional change intended. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-9-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Add rockchip_pcie_get_ltssm() helperNiklas Cassel
Add a rockchip_pcie_ltssm() helper function that reads the LTSSM status. This helper will be used in additional places in follow-up commits. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-8-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Fix weird indentationNiklas Cassel
Fix the indentation of rockchip_pcie_{readl,writel}_apb() parameters to match the opening parenthesis. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-7-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dw-rockchip: Fix initial PERST# GPIO valueNiklas Cassel
PERST# is active low according to the PCIe specification. However, the existing pcie-dw-rockchip.c driver does: gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1); when asserting + deasserting PERST#. This is of course wrong, but because all the device trees for this compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH: $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568* $ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588* The actual toggling of PERST# is correct, and we cannot change it anyway, since that would break device tree compatibility. However, this driver does request the GPIO to be initialized as GPIOD_OUT_HIGH, which does cause a silly sequence where PERST# gets toggled back and forth for no good reason. Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which for this driver means PERST# asserted). This will avoid an unnecessary signal change where PERST# gets deasserted (by devm_gpiod_get_optional()) and then gets asserted (by rockchip_pcie_start_link()) just a few instructions later. Before patch, debug prints on EP side, when booting RC: [ 845.606810] pci: PERST# asserted by host! [ 852.483985] pci: PERST# de-asserted by host! [ 852.503041] pci: PERST# asserted by host! [ 852.610318] pci: PERST# de-asserted by host! After patch, debug prints on EP side, when booting RC: [ 125.107921] pci: PERST# asserted by host! [ 132.111429] pci: PERST# de-asserted by host! This extra, very short, PERST# assertion + deassertion has been reported to cause issues with certain WLAN controllers, e.g. RTL8822CE. Fixes: 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver") Link: https://lore.kernel.org/linux-pci/20240417164227.398901-1-cassel@kernel.org Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # v5.15+
2024-07-09PCI: dw-rockchip: Add error messages in .probe() error pathsUwe Kleine-König
Drivers that silently fail to probe provide a bad user experience and make it unnecessarily hard to debug such a failure. Fix it by using dev_err_probe() instead of a plain return. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240227141256.413055-2-ukleinek@debian.org Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpioManivannan Sadhasivam
Rockchip platforms use 'GPIO_ACTIVE_HIGH' flag in the devicetree definition for ep_gpio. This means, whatever the logical value set by the driver for the ep_gpio, physical line will output the same logic level. For instance, gpiod_set_value_cansleep(rockchip->ep_gpio, 0); --> Level low gpiod_set_value_cansleep(rockchip->ep_gpio, 1); --> Level high But while requesting the ep_gpio, GPIOD_OUT_HIGH flag is currently used. Now, this also causes the physical line to output 'high' creating trouble for endpoint devices during host reboot. When host reboot happens, the ep_gpio will initially output 'low' due to the GPIO getting reset to its POR value. Then during host controller probe, it will output 'high' due to GPIOD_OUT_HIGH flag. Then during rockchip_pcie_host_init_port(), it will first output 'low' and then 'high' indicating the completion of controller initialization. On the endpoint side, each output 'low' of ep_gpio is accounted for PERST# assert and 'high' for PERST# deassert. With the above mentioned flow during host reboot, endpoint will witness below state changes for PERST#: (1) PERST# assert - GPIO POR state (2) PERST# deassert - GPIOD_OUT_HIGH while requesting GPIO (3) PERST# assert - rockchip_pcie_host_init_port() (4) PERST# deassert - rockchip_pcie_host_init_port() Now the time interval between (2) and (3) is very short as both happen during the driver probe(), and this results in a race in the endpoint. Because, before completing the PERST# deassertion in (2), endpoint got another PERST# assert in (3). A proper way to fix this issue is to change the GPIOD_OUT_HIGH flag in (2) to GPIOD_OUT_LOW. Because the usual convention is to request the GPIO with a state corresponding to its 'initial/default' value and let the driver change the state of the GPIO when required. As per that, the ep_gpio should be requested with GPIOD_OUT_LOW as it corresponds to the POR value of '0' (PERST# assert in the endpoint). Then the driver can change the state of the ep_gpio later in rockchip_pcie_host_init_port() as per the initialization sequence. This fixes the firmware crash issue in Qcom based modems connected to Rockpro64 based board. Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support") Closes: https://lore.kernel.org/mhi/20240402045647.GG2933@thinkpad/ Link: https://lore.kernel.org/linux-pci/20240416-pci-rockchip-perst-fix-v1-1-4800b1d4d954@linaro.org Reported-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Cc: stable@vger.kernel.org # v4.9
2024-07-09PCI: rockchip-host: Wait 100ms after reset before starting configurationDamien Le Moal
PCIe r6.0, sec 6.6.1, states that the host should wait for at least 100 msec from the end of a conventional reset (PERST# is de-asserted) before sending a configuration request to ensure that the device is able to respond with a "Request Retry Status" completion. Add the PCIE_T_RRS_READY_MS macro to define this wait time and modify rockchip_pcie_host_init_port() to add this 100ms sleep after deasserting PERST# using the ep_gpio GPIO. Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-3-dlemoal@kernel.org Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handlingDamien Le Moal
PCIe CEM r5.1, sec 2.9.2, mandates that the PERST# signal must remain asserted for at least 100 usec (Tperst-clk) after the PCIe reference clock becomes stable (if a reference clock is supplied), and for at least 100 msec after the power is stable (Tpvperl, defined by the macro PCIE_T_PVPERL_MS). Modify rockchip_pcie_host_init_port() to satisfy these constraints by adding a sleep period before deasserting PERST# using the ep_gpio GPIO. Since Tperst-clk is the shorter wait time, add an msleep() call for the longer PCIE_T_PVPERL_MS milliseconds to handle both timing requirements. Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dwc: ep: Enforce DWC specific 64-bit BAR limitationNiklas Cassel
From the DWC EP databook 5.96a, section "3.5.7.1.4 General Rules for BAR Setup (Fixed Mask or Programmable Mask Schemes Only)": "Any pair (for example BARs 0 and 1) can be configured as one 64-bit BAR, two 32-bit BARs, or one 32-bit BAR." "BAR pairs cannot overlap to form a 64-bit BAR. For example, you cannot combine BARs 1 and 2 to form a 64-bit BAR." While this limitation does exist in some other PCI endpoint controllers, e.g. cdns_pcie_ep_set_bar(), the limitation does not appear to be defined in the PCIe specification itself, thus add an explicit check for this in dw_pcie_ep_set_bar() (rather than pci_epc_set_bar()). Link: https://lore.kernel.org/linux-pci/20240528134839.8817-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: layerscape-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link ↵Manivannan Sadhasivam
Down event Now that dw_pcie_ep_linkdown() is available, use it. This also handles the reinitialization of DWC non-sticky registers in addition to sending the notification to EPF drivers. Closes: https://lore.kernel.org/linux-pci/20240528195539.GA458945@bhelgaas Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-5-4395534520dc@linaro.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down ↵Manivannan Sadhasivam
event Now that the generic dw_pcie_ep_linkdown() API is available, use it. This also handles the reinitialization of DWC non-sticky registers in addition to sending the notification to EPF drivers. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-9-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapperManivannan Sadhasivam
Currently dw_pcie_ep_init_notify() wrapper just calls pci_epc_init_notify() directly, so this wrapper provides no benefit to the glue drivers. Remove it and call pci_epc_init_notify() directly from glue drivers. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-1-4395534520dc@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down eventManivannan Sadhasivam
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the following circumstances: 1. Fundamental/Hot reset 2. Link disable transmission by upstream component 3. Moving from L2/L3 to L0 In those cases, Link Down causes some non-sticky DWC registers to lose the state (like REBAR, etc.), so drivers need to reinitialize them to function properly once the link comes back again. This is not a problem for drivers supporting PERST# IRQ, since they can reinitialize the registers in the PERST# IRQ callback. But for the drivers not supporting PERST#, there is no way they can reinitialize the registers other than relying on Link Down IRQ received when the link goes down. So add a DWC generic API dw_pcie_ep_linkdown() that reinitializes the non-sticky registers and also notifies the EPF drivers about link going down. This API can also be used by the drivers supporting PERST# to handle the scenario (2) mentioned above. NOTE: For the sake of code organization, move the dw_pcie_ep_linkup() definition just above dw_pcie_ep_linkdown(). Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-8-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: update spec citation] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system ↵Frank Li
suspend Instead of relying on the vendor specific implementations to send the PME_Turn_Off message, introduce a generic way of sending the message using the MSG TLP. This is achieved by reserving a region for MSG TLP of size 'pci->region_align', at the end of the first IORESOURCE_MEM window of the host bridge. And then sending the PME_Turn_Off message during system suspend with the help of iATU. The reason for reserving the MSG TLP region at the end of the IORESOURCE_MEM is to avoid generating holes in between, because when the region is allocated using allocate_resource(), memory will be allocated from the start of the window. Later, if memory gets allocated for an endpoint of size bigger than 'region_align', there will be a hole between MSG TLP region and endpoint memory. This generic implementation is optional for the glue drivers and can be overridden by a custom 'pme_turn_off' callback. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-5-a54265c39742@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macroFrank Li
Add PCIE_MSG_CODE_PME_TURN_OFF macros to enable a PCIe host driver to send PME_Turn_Off messages. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-4-a54265c39742@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macrosYoshihiro Shimoda
Add "Message Routing" and "INTx Mechanism Messages" macros to enable a PCIe driver to send messages for INTx Interrupt Signaling. Values from PCIe r6.1, sec 2.2.8 and 2.2.8.1. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-1-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Add outbound MSG TLPs supportYoshihiro Shimoda
Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering INTx IRQs by iATU in the PCIe endpoint mode in near the future. PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of MsgD. This implementation supports the data-less messages only for now. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-3-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structureYoshihiro Shimoda
This is a preparation before adding the Msg-type outbound iATU mapping. The respective update will require two more arguments added to __dw_pcie_prog_outbound_atu(). That will make the already complicated function prototype even more hard to comprehend accepting _eight_ arguments. To prevent that and keep the code more-or-less readable, move all the outbound iATU-related arguments to a new config structure: struct dw_pcie_ob_atu_cfg, and pass a pointer to dw_pcie_prog_outbound_atu(). The structure should be locally defined and populated with the outbound iATU settings implied by the caller context. As a result of this change there is no longer need in having the two distinctive methods for the Host and Endpoint outbound iATU setups since the code can directly call the dw_pcie_prog_outbound_atu() method with the config structure populated, so drop dw_pcie_prog_ep_outbound_atu(). [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-2-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slotFrank Li
When PERST# assert and deassert happens on the PERST# supported platforms, both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the area that was previously allocated (iATU0) for BAR0, instead of the new area (iATU6) for BAR0. Right now, this isn't an issue because both iATU0 and iATU6 should translate inbound accesses to BAR0 to the same allocated memory area. However, having two separate inbound mappings for the same BAR is a disaster waiting to happen. The mappings between PCI BAR and iATU inbound window are maintained in the dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the existing mapping in the array and if it is not found (i.e., value in the array indexed by the BAR is found to be 0), it allocates a new map value using find_first_zero_bit(). The issue is the existing logic failed to consider the fact that the map value '0' is a valid value for BAR0, so find_first_zero_bit() will return '0' as the map value for BAR0 (note that it returns the first zero bit position). Due to this, when PERST# assert + deassert happens on the PERST# supported platforms, the inbound window allocation restarts from BAR0 and the existing logic to find the BAR mapping will return '6' for BAR0 instead of '0' due to the fact that it considers '0' as an invalid map value. Fix this issue by always incrementing the map value before assigning to bar_to_atu[] array and then decrementing it while fetching. This will make sure that the map value '0' always represents the invalid mapping." Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/ Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2024-07-09PCI: dwc: Use msleep() in dw_pcie_wait_for_link()Konrad Dybcio
According to [1], msleep should be used for large sleeps, such as the 100-ish ms one in this function. Comply with the guide and use it. [1] https://docs.kernel.org/timers/timers-howto.html [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.org Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09Documentation: PCI: pci-endpoint: Fix EPF ops listAlexander Stein
With commit 5779dd0a7dbd7 ("PCI: endpoint: Use notification chain mechanism to notify EPC events to EPF") the linkup callback has been removed and replaced by EPC event notifications. With commit 256ae475201b1 ("PCI: endpoint: Add pci_epf_ops to expose function-specific attrs") a new (optional) add_cfs callback was added. Update documentation accordingly. Link: https://lore.kernel.org/linux-pci/20240418084924.1724703-1-alexander.stein@ew.tq-group.com Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} ↵Jiapeng Chong
functions These two functions are defined in the pci_endpoint_test.c file, but not called elsewhere, so delete these unused functions. This fixes the following warning: drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'. drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'. No functional changes intended. [kwilczynski: commit log] Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064 Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-09misc: pci_endpoint_test: Document policy about adding pci_device_idYoshihiro Shimoda
Add a comment suggesting that if the endpoint controller Vendor and Device ID are programmable, an existing entry might be usable for testing without having to add an entry to pci_endpoint_test_tbl[]. Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-07-09misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logicFrank Li
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit, unless the architecture has no DMA support. So no need to check for the error and also no need to set dma_set_mask_and_coherent(32) as a fallback. Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support (theoretically), then dma_set_mask_and_coherent(32) will also fail for the same reason. So the fallback doesn't make sense. Simplify the code by setting the streaming and coherent DMA mask to 48 bits. Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR testsNiklas Cassel
The current code uses writel()/readl(), which has an implicit memory barrier for every single readl()/writel(). Additionally, reading 4 bytes at a time over the PCI bus is not really optimal, considering that this code is running in an ioctl handler. Use memcpy_toio()/memcpy_fromio() for BAR tests. Before patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 1.56s After patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 0.54s Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-07-09misc: pci_endpoint_test: Add support for Rockchip rk3588Niklas Cassel
Rockchip rk3588 requires 64KB alignment for BARs. While there is an existing device_id:vendor_id in the driver with 64KB alignment, that device_id:vendor_id is am654, which uses BAR2 instead of BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks in the driver to disallow BAR0. In order to allow testing all BARs, add a new rk3588 entry in the driver. We intentionally do not add the vendor id to pci_ids.h, since the policy for that file is that the vendor id has to be used by multiple drivers. Hopefully, this new entry will be short-lived, as there is a series on the mailing list which intends to move the address alignment restrictions from this driver to the endpoint side. Add a new entry for rk3588 in order to allow us to test all BARs. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-04PCI: endpoint: Fix error handling in epf_ntb_epc_cleanup()Dan Carpenter
There are two issues related to epf_ntb_epc_cleanup(): 1) It should call epf_ntb_config_sspad_bar_clear() 2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup() to cleanup. I also changed the ordering a bit. Unwinding should be done in the mirror order from how they are allocated. Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-07-04PCI: endpoint: Clean up error handling in vpci_scan_bus()Dan Carpenter
Smatch complains about inconsistent NULL checking in vpci_scan_bus(): drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021) Instead of printing an error message and then crashing we should return an error code and clean up. Also the NULL check is reversed so it prints an error for success instead of failure. Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-07-04PCI: endpoint: Make pci_epc_class struct constantGreg Kroah-Hartman
Now that the driver core allows for struct class to be in read-only memory, we should make all 'class' structures declared at build time placing them into read-only memory, instead of having to be dynamically allocated at runtime. Link: https://lore.kernel.org/linux-pci/2024061011-citable-herbicide-1095@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-07-04PCI: endpoint: Introduce 'epc_deinit' event and notify the EPF driversManivannan Sadhasivam
As like the 'epc_init' event, that is used to signal the EPF drivers about the EPC initialization, let's introduce 'epc_deinit' event that is used to signal EPC deinitialization. The EPC deinitialization applies only when any sort of fundamental reset is supported by the endpoint controller as per the PCIe spec. Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1. Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support PERST# as the fundamental reset. So the 'deinit' event will be notified to the EPF drivers when PERST# assert happens in the above mentioned EPC drivers. The EPF drivers, on receiving the event through the epc_deinit() callback should reset the EPF state machine and also cleanup any configuration that got affected by the fundamental reset like BAR, DMA etc... This change also warrants skipping the cleanups in unbind() if already done in epc_deinit(). Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-05-28PCI: endpoint: pci-epf-test: Handle Link Down eventManivannan Sadhasivam
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the following circumstances: 1. Fundamental/Hot reset 2. Link disable transmission by upstream component 3. Moving from L2/L3 to L0 When the event happens, the EPC driver capable of detecting it may pass the notification to the EPF driver through link_down() callback in 'struct pci_epc_event_ops'. While the PCIe spec has not defined the actual behavior of the endpoint when the Link Down event happens, we may assume that at least the ongoing transactions need to be stopped as the link won't be active, so cancel the command handler work in the callback implementation pci_epf_test_link_down(). The work will be started again in pci_epf_test_link_up() once the link comes back again. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-10-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: update spec citation] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-{mhi/test}: Move DMA initialization to EPC init callbackManivannan Sadhasivam
To maintain uniformity across EPF drivers, move DMA initialization to EPC init callback. This will also allow us to deinit DMA during PERST# assert in the further commits. For EPC drivers without PERST#, DMA deinit will only happen during driver unbind. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-6-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-test: Refactor pci_epf_test_unbind() functionManivannan Sadhasivam
Move the pci_epc_clear_bar() and pci_epf_free_space() code to respective helper functions. This allows reusing the helpers in future commits. This also requires moving the pci_epf_test_unbind() definition below pci_epf_test_bind() to avoid forward declaration of the above helpers. No functional change. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-5-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: Rename BME to Bus Master EnableManivannan Sadhasivam
BME which stands for 'Bus Master Enable' is not defined in the PCIe base spec even though it is commonly referred in many places (vendor docs). To align with the spec, rename it to its expansion 'Bus Master Enable'. Suggested-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-3-22832d0d456f@linaro.org Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-4-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: squash removal of irrelevant 'Link is enabled'] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: Rename core_init() callback in 'struct pci_epc_event_ops' to ↵Manivannan Sadhasivam
epc_init() core_init() callback is used to notify the EPC initialization event to the EPF drivers. The 'core' prefix was used indicate that the controller IP core has completed initialization. But it serves no purpose as the EPF driver will only care about the EPC initialization as a whole and there is no real benefit to distinguish the IP core part. Rename the core_init() callback in 'struct pci_epc_event_ops' to epc_init() to make it more clear. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-2-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-test: Use 'msix_capable' flag directly in ↵Manivannan Sadhasivam
pci_epf_test_alloc_space() Instead of using a local variable to cache the 'msix_capable' flag, use it directly to simplify the code. Suggested-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-2-eacd54831444@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in ↵Manivannan Sadhasivam
pci_epf_test_core_init() Instead of getting the epc_features from pci_epc_get_features() API, use the cached pci_epf_test::epc_features value to avoid the NULL check. Since the NULL check is already performed in pci_epf_test_bind(), having one more check in pci_epf_test_core_init() is redundant and it is not possible to hit the NULL pointer dereference. Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier" flag"), 'epc_features' got dereferenced without the NULL check, leading to the following false positive Smatch warning: drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747) Thus, remove the redundant NULL check and also use the epc_features:: {msix_capable/msi_capable} flags directly to avoid local variables. [kwilczynski: commit log] Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization") Closes: https://lore.kernel.org/linux-pci/024b5826-7180-4076-ae08-57d2584cca3f@moroto.mountain Link: https://lore.kernel.org/linux-pci/20240418-pci-epf-test-fix-v2-1-eacd54831444@linaro.org Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-05-28PCI: endpoint: Remove unused field in struct pci_epf_groupChristophe JAILLET
In "struct pci_epf_group", the 'type_group' field is unused. This was added, but already unused, by commit 70b3740f2c19 ("PCI: endpoint: Automatically create a function specific attributes group"). Thus, remove it. Found with cppcheck, unusedStructMember. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/6507d44b6c60a19af35a605e2d58050be8872ab6.1712341008.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-05-26Linux 6.10-rc1Linus Torvalds
2024-05-26mm: percpu: Include smp.h in alloc_tag.hKent Overstreet
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/ Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-05-26Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
2024-05-26Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"Arnaldo Carvalho de Melo
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Ethan Adams <j.ethan.adams@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-05-25Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
2024-05-25Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
2024-05-25Merge tag 'irq-urgent-2024-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
2024-05-25Merge tag 'x86-urgent-2024-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
2024-05-25Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
2024-05-25Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: "A series from Xiubo that adds support for additional access checks based on MDS auth caps which were recently made available to clients. This is needed to prevent scenarios where the MDS quietly discards updates that a UID-restricted client previously (wrongfully) acked to the user. Other than that, just a documentation fixup" * tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client: doc: ceph: update userspace command to get CephFS metadata ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit ceph: check the cephx mds auth access for async dirop ceph: check the cephx mds auth access for open ceph: check the cephx mds auth access for setattr ceph: add ceph_mds_check_access() helper ceph: save cap_auths in MDS client when session is opened
2024-05-25Merge tag 'ntfs3_for_6.10' of ↵Linus Torvalds
https://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 updates from Konstantin Komarov: "Fixes: - reusing of the file index (could cause the file to be trimmed) - infinite dir enumeration - taking DOS names into account during link counting - le32_to_cpu conversion, 32 bit overflow, NULL check - some code was refactored Changes: - removed max link count info display during driver init Remove: - atomic_open has been removed for lack of use" * tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3: fs/ntfs3: Break dir enumeration if directory contents error fs/ntfs3: Fix case when index is reused during tree transformation fs/ntfs3: Mark volume as dirty if xattr is broken fs/ntfs3: Always make file nonresident on fallocate call fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode fs/ntfs3: Use variable length array instead of fixed size fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow fs/ntfs3: Check 'folio' pointer for NULL fs/ntfs3: Missed le32_to_cpu conversion fs/ntfs3: Remove max link count info display during driver init fs/ntfs3: Taking DOS names into account during link counting fs/ntfs3: remove atomic_open fs/ntfs3: use kcalloc() instead of kzalloc()
2024-05-25Merge tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both for stable" * tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: ignore trailing slashes in share paths ksmbd: avoid to send duplicate oplock break notifications
generated by cgit (git 2.34.1) at 2025-09-09 01:21:14 +0000