summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-19btrfs: remove mirror argument from btrfs_csum_verify_data()Goldwyn Rodrigues
The parameter mirror is not used and does not make sense for checksum verification of the given bio. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: remove force argument from run_delalloc_nocow()Goldwyn Rodrigues
force_cow can be calculated from inode and does not need to be passed as an argument. This simplifies run_delalloc_nocow() call from btrfs_run_delalloc_range() A new function, should_nocow() checks if the range should be NOCOWed or not. The function returns true iff either BTRFS_INODE_NODATA or BTRFS_INODE_PREALLOC, but is not a defrag extent. Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: don't opencode extent_changeset_freeNikolay Borisov
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: assign proper values to a bool variable in dev_extent_hole_check_zonedJiapeng Chong
Fix the following coccicheck warnings: ./fs/btrfs/volumes.c:1462:10-11: WARNING: return of 0/1 in function 'dev_extent_hole_check_zoned' with return type bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: add btree read ahead for incremental send operationsFilipe Manana
Currently we do not do btree read ahead when doing an incremental send, however we know that we will read and process any node or leaf in the send root that has a generation greater than the generation of the parent root. So triggering read ahead for such nodes and leafs is beneficial for an incremental send. This change does that, triggers read ahead of any node or leaf in the send root that has a generation greater then the generation of the parent root. As for the parent root, no readahead is triggered because knowing in advance which nodes/leaves are going to be read is not so linear and there's often a large time window between visiting nodes or leaves of the parent root. So I opted to leave out the parent root, and triggering read ahead for its nodes/leaves seemed to have not made significant difference. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of ram: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing incremental send..." start=$(date +%s) btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null end=$(date +%s) echo echo "Incremental send took $((end - start)) seconds" umount $MNT Before this change, incremental send duration: with $initial_file_count == 200000: 51 seconds with $initial_file_count == 500000: 168 seconds After this change, incremental send duration: with $initial_file_count == 200000: 39 seconds (-26.7%) with $initial_file_count == 500000: 125 seconds (-29.4%) For $initial_file_count == 200000 there are 62600 nodes and leaves in the btree of the first snapshot, and 77759 nodes and leaves in the btree of the second snapshot. The root nodes were at level 2. While for $initial_file_count == 500000 there are 152476 nodes and leaves in the btree of the first snapshot, and 190511 nodes and leaves in the btree of the second snapshot. The root nodes were at level 2 as well. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: add btree read ahead for full send operationsFilipe Manana
When doing a full send we know that we are going to be reading every node and leaf of the send root, so we benefit from enabling read ahead for the btree. This change enables read ahead for full send operations only, incremental sends will have read ahead enabled in a different way by a separate patch. The following test script was used to measure the improvement on a box using an average, consumer grade, spinning disk and with 16GiB of RAM: $ cat test.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj MKFS_OPTIONS="--nodesize 16384" # default, just to be explicit MOUNT_OPTIONS="-o max_inline=2048" # default, just to be explicit mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null mount $MOUNT_OPTIONS $DEV $MNT # Create files with inline data to make it easier and faster to create # large btrees. add_files() { local total=$1 local start_offset=$2 local number_jobs=$3 local total_per_job=$(($total / $number_jobs)) echo "Creating $total new files using $number_jobs jobs" for ((n = 0; n < $number_jobs; n++)); do ( local start_num=$(($start_offset + $n * $total_per_job)) for ((i = 1; i <= $total_per_job; i++)); do local file_num=$((start_num + $i)) local file_path="$MNT/file_${file_num}" xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null if [ $? -ne 0 ]; then echo "Failed creating file $file_path" break fi done ) & worker_pids[$n]=$! done wait ${worker_pids[@]} sync echo echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)" } initial_file_count=500000 add_files $initial_file_count 0 4 echo echo "Creating first snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap1 echo echo "Adding more files..." add_files $((initial_file_count / 4)) $initial_file_count 4 echo echo "Updating 1/50th of the initial files..." for ((i = 1; i < $initial_file_count; i += 50)); do xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null done echo echo "Creating second snapshot..." btrfs subvolume snapshot -r $MNT $MNT/snap2 umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing full send..." start=$(date +%s) btrfs send $MNT/snap1 > /dev/null end=$(date +%s) echo echo "Full send took $((end - start)) seconds" umount $MNT echo 3 > /proc/sys/vm/drop_caches blockdev --flushbufs $DEV &> /dev/null hdparm -F $DEV &> /dev/null mount $MOUNT_OPTIONS $DEV $MNT echo echo "Testing incremental send..." start=$(date +%s) btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null end=$(date +%s) echo echo "Incremental send took $((end - start)) seconds" umount $MNT Before this change, full send duration: with $initial_file_count == 200000: 165 seconds with $initial_file_count == 500000: 407 seconds After this change, full send duration: with $initial_file_count == 200000: 149 seconds (-10.2%) with $initial_file_count == 500000: 353 seconds (-14.2%) For $initial_file_count == 200000 there are 62600 nodes and leaves in the btree of the first snapshot, while for $initial_file_count == 500000 there are 152476 nodes and leaves. The roots were at level 2. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: simplify code flow in btrfs_delayed_inode_reserve_metadataNikolay Borisov
btrfs_block_rsv_add can return only ENOSPC since it's called with NO_FLUSH modifier. This so simplify the logic in btrfs_delayed_inode_reserve_metadata to exploit this invariant. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add assert and comment ] Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: remove btrfs_inode parameter from btrfs_delayed_inode_reserve_metadataNikolay Borisov
It's only used for tracepoint to obtain the inode number, but we already have the ino from btrfs_delayed_node::inode_id. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: simplify commit logic in try_flush_qgroupNikolay Borisov
It's no longer expected to call this function with an open transaction so all the workarounds concerning this can be removed. In fact it'll constitute a bug to call this function with a transaction already held so WARN in this case. Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: scrub: drop a few function declarationsAnand Jain
Drop function declarations at the beginning of the file scrub.c. These functions are defined before they are used in the same file and don't need forward declaration. No functional changes. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: change return type to bool in btrfs_extent_readonlyAnand Jain
btrfs_extent_readonly() checks if the block group is readonly, the bool return type should be used. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: unexport btrfs_extent_readonly() and make it staticAnand Jain
btrfs_extent_readonly() is used by can_nocow_extent() in inode.c. So move it from extent-tree.c to inode.c and declare it as static. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: replace open coded while loop with proper constructNikolay Borisov
btrfs_inc_block_group_ro wants to ensure that the current transaction is not running dirty block groups, if it is it waits and loops again. That logic is currently implemented using a goto label. Actually using a proper do {} while() construct doesn't hurt readability nor does it introduce excessive nesting and makes the relevant code stand out by being encompassed in the loop construct. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: replace offset_in_entry with in_rangeNikolay Borisov
No point in duplicating the functionality just use the generic helper that has the same semantics. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: make find_desired_extent take btrfs_inodeNikolay Borisov
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: make btrfs_replace_file_extents take btrfs_inodeNikolay Borisov
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19btrfs: fix comment for btrfs ordered extent flag bitsQu Wenruo
There is small error in comment about BTRFS_ORDERED_* flags, added in commit 3c198fe06449 ("btrfs: rework the order of btrfs_ordered_extent::flags") but the fixup did not get merged in time. The 4 types are for ordered extent itself, not for direct io. Only 3 types support direct io, REGULAR/NOCOW/PREALLOC. Fix the comment to reflect that. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19Merge series "spi: stm32-qspi: Fix and update" from ↵Mark Brown
<patrice.chotard@foss.st.com> Patrice Chotard <patrice.chotard@foss.st.com>: From: Patrice Chotard <patrice.chotard@foss.st.com> Christophe Kerello (1): spi: stm32-qspi: fix pm_runtime usage_count counter Patrice Chotard (2): spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer spi: stm32-qspi: Add dirmap support drivers/spi/spi-stm32-qspi.c | 106 +++++++++++++++++++++++++++-------- 1 file changed, 84 insertions(+), 22 deletions(-) -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-04-19Merge tag 'qcom-dts-for-5.13-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt More Qualcomm DTS updates for 5.13 This adds CPUfreq, interconnect providers, IPC, remoteproc and IPA to the SDX55 platform and then adds board files for the Telit FN980 TLB and Thundercomm TurboX T55. * tag 'qcom-dts-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: sdx55: add IPA information ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55 dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board ARM: dts: qcom: sdx55: Add Modem remoteproc node ARM: dts: qcom: Fix node name for NAND controller node ARM: dts: qcom: sdx55: Add interconnect nodes ARM: dts: qcom: sdx55: Add SCM node dt-bindings: firmware: scm: Add compatible for SDX55 ARM: dts: qcom: sdx55: Add IMEM and PIL info region ARM: dts: qcom: sdx55: Add modem SMP2P node ARM: dts: qcom: sdx55: Add CPUFreq support ARM: dts: qcom: sdx55: Add support for APCS block ARM: dts: qcom: sdx55: Add support for A7 PLL clock Link: https://lore.kernel.org/r/20210419150956.860423-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19arm64: dts: qcom: sc7180: Update iommu property for simultaneous playbackV Sujith Kumar Reddy
Update iommu property in lpass cpu node for supporting simultaneous playback on headset and speaker. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/20210406163330.11996-1-srivasam@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-19arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound modelDouglas Anderson
Match what's downstream for this board. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Cc: Ajit Pandey <ajitp@codeaurora.org> Cc: Judy Hsiao <judyhsiao@chromium.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210315133924.v2.2.If218189eff613a6c48ba12d75fad992377d8f181@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-19arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"Douglas Anderson
This was present downstream. Add upstream too. NOTE: upstream I managed to get some sort of halfway state and got one pinctrl entry in the coachz-r1 device tree. Remove that as part of this since it's now in the dtsi. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Cc: Ajit Pandey <ajitp@codeaurora.org> Cc: Judy Hsiao <judyhsiao@chromium.org> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210315133924.v2.1.I601a051cad7cfd0923e55b69ef7e5748910a6096@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-19ARM: dts: mstar: Add a dts for M5Stack UnitV2Daniel Palmer
M5Stack are releasing a new widget based on the SigmaStar SSD202D. We have some support for the SSD202D so lets add a dts for it. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://m5stack-store.myshopify.com/products/unitv2-ai-camera-gc2145 Link: https://lore.kernel.org/r/20210417011015.2105280-4-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2Daniel Palmer
Add a compatible for the M5Stack UnitV2 that is based on the SigmaStar SSD202D (inifinity2m). Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210417011015.2105280-3-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19dt-bindings: vendor-prefixes: Add vendor prefix for M5StackDaniel Palmer
M5Stack make various modules for STEM, Makers, IoT. Their UnitV2 is based on a SigmaStar SSD202D SoC which we already have some minimal support for so add a prefix in preparation for UnitV2 board support. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://m5stack.com/ Link: https://lore.kernel.org/r/20210417011015.2105280-2-daniel@0x0f.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19arm64: dts: mt8183: fix dtbs_check warningMatthias Brugger
Fix unit names to make dtbs_check happy. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210414144643.17435-2-matthias.bgg@kernel.org Link: https://lore.kernel.org/r/20210416143923.23406-3-matthias.bgg@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19arm64: dts: mt8183-pumpkin: fix dtbs_check warningMatthias Brugger
Fix unit names to make dtbs_check happy. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210414144643.17435-1-matthias.bgg@kernel.org Link: https://lore.kernel.org/r/20210416143923.23406-2-matthias.bgg@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19Merge tag 'memory-controller-drv-5.13-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers Memory controller drivers for v5.13, part two 1. Renesas RPC: fix possible NULL pointer. 2. Exynos5422 DMC: add proper error checking for clk_prepare. 3. Mediatek SMI: use device-links instead of explicit PM runtime calls. * tag 'memory-controller-drv-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource Link: https://lore.kernel.org/r/20210415065514.7385-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-19shmem: allow reporting fanotify events with file handles on tmpfsAmir Goldstein
Since kernel v5.1, fanotify_init(2) supports the flag FAN_REPORT_FID for identifying objects using file handle and fsid in events. fanotify_mark(2) fails with -ENODEV when trying to set a mark on filesystems that report null f_fsid in stasfs(2). Use the digest of uuid as f_fsid for tmpfs to uniquely identify tmpfs objects as best as possible and allow setting an fanotify mark that reports events with file handles on tmpfs. Link: https://lore.kernel.org/r/20210322173944.449469-3-amir73il@gmail.com Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-04-19fs: introduce a wrapper uuid_to_fsid()Amir Goldstein
Some filesystem's use a digest of their uuid for f_fsid. Create a simple wrapper for this open coded folding. Filesystems that have a non null uuid but use the block device number for f_fsid may also consider using this helper. [JK: Added missing asm/byteorder.h include] Link: https://lore.kernel.org/r/20210322173944.449469-2-amir73il@gmail.com Acked-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2021-04-19spi: Handle SPI device setup callback failure.Joe Burmeister
If the setup callback failed, but the controller has auto_runtime_pm and set_cs, the setup failure could be missed. Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk> Link: https://lore.kernel.org/r/20210419130631.4586-1-joe.burmeister@devtank.co.uk Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: sync up initial chipselect stateDavid Bauer
When initially probing the SPI slave device, the call for disabling an SPI device without the SPI_CS_HIGH flag is not applied, as the condition for checking whether or not the state to be applied equals the one currently set evaluates to true. This however might not necessarily be the case, as the chipselect might be active. Add a force flag to spi_set_cs which allows to override this early exit condition. Set it to false everywhere except when called from spi_setup to sync up the initial CS state. Fixes commit d40f0b6f2e21 ("spi: Avoid setting the chip select if we don't need to") Signed-off-by: David Bauer <mail@david-bauer.net> Link: https://lore.kernel.org/r/20210416195956.121811-1-mail@david-bauer.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: stm32-qspi: Add dirmap supportPatrice Chotard
Add stm32_qspi_dirmap_read() and stm32_qspi_dirmap_create() to get dirmap support. Update the exec_op callback which doens't allow anymore memory map access. Memory map access are only available through the dirmap_read callback. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210419121541.11617-4-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transferPatrice Chotard
In order to optimize accesses to spi flashes, trigger a DMA only if more than 4 bytes has to be transferred. DMA transfer preparation's cost becomes negligible above 4 bytes to transfer. Below this threshold, indirect transfer give more throughput. mtd_speedtest shows that page write throughtput increases : - from 779 to 853 KiB/s (~9.5%) with s25fl512s SPI-NOR. - from 5283 to 5666 KiB/s (~7.25%) with Micron SPI-NAND. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210419121541.11617-3-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: stm32-qspi: fix pm_runtime usage_count counterChristophe Kerello
pm_runtime usage_count counter is not well managed. pm_runtime_put_autosuspend callback drops the usage_counter but this one has never been increased. Add pm_runtime_get_sync callback to bump up the usage counter. It is also needed to use pm_runtime_force_suspend and pm_runtime_force_resume APIs to handle properly the clock. Fixes: 9d282c17b023 ("spi: stm32-qspi: Add pm_runtime support") Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210419121541.11617-2-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19x86/build: Disable HIGHMEM64G selection for M486SXMaciej W. Rozycki
Fix a regression caused by making the 486SX separately selectable in Kconfig, for which the HIGHMEM64G setting has not been updated and therefore has become exposed as a user-selectable option for the M486SX configuration setting unlike with original M486 and all the other settings that choose non-PAE-enabled processors: High Memory Support > 1. off (NOHIGHMEM) 2. 4GB (HIGHMEM4G) 3. 64GB (HIGHMEM64G) choice[1-3?]: With the fix in place the setting is now correctly removed: High Memory Support > 1. off (NOHIGHMEM) 2. 4GB (HIGHMEM4G) choice[1-2?]: [ bp: Massage commit message. ] Fixes: 87d6021b8143 ("x86/math-emu: Limit MATH_EMULATION to 486SX compatibles") Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v5.5+ Link: https://lkml.kernel.org/r/alpine.DEB.2.21.2104141221340.44318@angie.orcam.me.uk
2021-04-19cfg80211: scan: drop entry from hidden_list on overflowJohannes Berg
If we overflow the maximum number of BSS entries and free the new entry, drop it from any hidden_list that it may have been added to in the code above or in cfg80211_combine_bsses(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210416094212.5de7d1676ad7.Ied283b0bc5f504845e7d6ab90626bdfa68bb3dc0@changeid Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: fix spelling of A-MSDU in HE capabilitiesJohannes Berg
In the HE capabilities, spell A-MSDU correctly, not "A-MDSU". Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.9e6ff1af1181.If6868bc6902ccd9a95c74c78f716c4b41473ef14@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align HE capabilities A-MPDU Length Exponent ExtensionJohannes Berg
The A-MPDU length exponent extension is defined differently in 802.11ax D6.1, align with that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.c2a257d3e2df.I3455245d388c52c61dace7e7958dbed7e807cfb6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19wireless: align some HE capabilities with the specJohannes Berg
Some names were changed, align that with the spec as of 802.11ax-D6.1. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.b1e5fbab0d8c.I3eb6076cb0714ec6aec6b8f9dee613ce4a05d825@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19xfrm: ipcomp: remove unnecessary get_cpu()Sabrina Dubroca
While testing ipcomp on a realtime kernel, Xiumei reported a "sleeping in atomic" bug, caused by a memory allocation while preemption is disabled (ipcomp_decompress -> alloc_page -> ... get_page_from_freelist). As Sebastian noted [1], this get_cpu() isn't actually needed, since ipcomp_decompress() is called in napi context anyway, so BH is already disabled. This patch replaces get_cpu + per_cpu_ptr with this_cpu_ptr, then simplifies the error returns, since there isn't any common operation left. [1] https://lore.kernel.org/lkml/20190820082810.ixkmi56fp7u7eyn2@linutronix.de/ Cc: Juri Lelli <jlelli@redhat.com> Reported-by: Xiumei Mu <xmu@redhat.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-04-19xfrm: avoid synchronize_rcu during netns destructionFlorian Westphal
Use the new exit_pre hook to NULL the netlink socket. The net namespace core will do a synchronize_rcu() between the exit_pre and exit/exit_batch handlers. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-04-19xfrm: remove stray synchronize_rcu from xfrm_initFlorian Westphal
This function is called during boot, from ipv4 stack, there is no need to set the pointer to NULL (static storage duration, so already NULL). No need for the synchronize_rcu either. Remove both. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-04-19flow: remove spi key from flowi structFlorian Westphal
xfrm session decode ipv4 path (but not ipv6) sets this, but there are no consumers. Remove it. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-04-19m68k: sun3x: Remove unneeded semicolonWan Jiabing
Fix the following coccicheck warning: ./arch/m68k/include/asm/sun3xflop.h:109:2-3: Unneeded semicolon Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20210415031450.23379-1-wanjiabing@vivo.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-04-19mac80211: drop the connection if firmware crashed while in CSANaftali Goldstein
Don't bother keeping the link in that case. It is way too complicated to keep the connection. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.a126c8833398.I677bdac314dd50d90474a90593902c17f9410cc4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19nl80211: Add new RSNXE related nl80211 extended featuresIlan Peer
Draft P802.11ax_D2.5 defines the following capabilities that can be negotiated using RSNXE capabilities: - Secure LTF measurement exchange protocol. - Secure RTT measurement exchange protocol. - Management frame protection for all management frames exchanged during the negotiation and range measurement procedure. Extend the nl80211 API to allow drivers to declare support for these new capabilities as part of extended feature. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.8280e31d8091.Ifcb29f84f432290338f80c8378aa5c9e0a390c93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19mac80211: properly drop the connection in case of invalid CSA IEEmmanuel Grumbach
In case the frequency is invalid, ieee80211_parse_ch_switch_ie will fail and we may not even reach the check in ieee80211_sta_process_chanswitch. Drop the connection in case ieee80211_parse_ch_switch_ie failed, but still take into account the CSA mode to remember not to send a deauth frame in case if it is forbidden to. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.34712ef96a0a.I75d7ad7f1d654e8b0aa01cd7189ff00a510512b3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19mac80211: make ieee80211_vif_to_wdev work when the vif isn't in the driverEmmanuel Grumbach
This will allow the low level driver to get the wdev during the add_interface flow. In order to do that, remove a few checks from there and do not return NULL for vifs that were not yet added to the driver. Note that all the current callers of this helper function assume that the vif already exists: - The callers from the drivers already have a vif pointer. Before this change, ieee80211_vif_to_wdev would return NULL in some cases, but those callers don't even check they get a non-NULL pointer from ieee80211_vif_to_wdev. - The callers from net/mac80211/cfg.c assume the vif is already added to the driver as well. So, this change has no impact on existing callers of this helper function. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.6078d3517095.I1907a45f267a62dab052bcc44428aa7a2005ffc9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19nl80211/cfg80211: add a flag to negotiate for LMR feedback in NDP rangingAvraham Stern
Add a flag that indicates that the ISTA shall indicate support for LMR feedback in NDP ranging negotiation. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210409123755.eff546283504.I2606161e700ac24d94d0b50c8edcdedd4c0395c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-20 13:37:34 +0000