summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-14arm64: allwinner: h5: fix pinctrl IRQsIcenowy Zheng
The pin controller of H5 has three IRQs at the chip's GIC, which represents three banks of pinctrl IRQs. However, the device tree used to miss the third IRQ of the pin controller, which makes the PG bank IRQ not usable. Add the missing IRQ to the pinctrl node. Fixes: 4e36de179f27 ("arm64: allwinner: h5: add Allwinner H5 .dtsi") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-13bonding: ratelimit failed speed/duplex update warningAndreas Born
bond_miimon_commit() handles the UP transition for each slave of a bond in the case of MII. It is triggered 10 times per second for the default MII Polling interval of 100ms. For device drivers that do not implement __ethtool_get_link_ksettings() the call to bond_update_speed_duplex() fails persistently while the MII status could remain UP. That is, in this and other cases where the speed/duplex update keeps failing over a longer period of time while the MII state is UP, a warning is printed every MII polling interval. To address these excessive warnings net_ratelimit() should be used. Printing a warning once would not be sufficient since the call to bond_update_speed_duplex() could recover to succeed and fail again later. In that case there would be no new indication what went wrong. Fixes: b5bf0f5b16b9c (bonding: correctly update link status during mii-commit phase) Signed-off-by: Andreas Born <futur.andy@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-13Linux 4.13-rc5Linus Torvalds
2017-08-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes: - compressed boot: Ignore a generated .c file - VDSO: Fix a register clobber list - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression - Octeon: Fix recent cleanups that cleaned away a bit too much thus breaking the arch side of the EDAC and USB drivers. - uasm: Fix duplicate const in "const struct foo const bar[]" which GCC 7.1 no longer accepts. - Fix race on setting and getting cpu_online_mask - Fix preemption issue. To do so cleanly introduce macro to get the size of L3 cache line. - Revert include cleanup that sometimes results in build error - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make sure this bit is set for kernel entry as well. - Prevent configuring the kernel for both microMIPS and MT. There are no such CPUs currently and thus the combination is unsupported and results in build errors. This has been sitting in linux-next for a few days and has survived automated testing by Imagination's test farm. No known regressions pending except a number of issues that crept up due to lots of people switching to GCC 7.1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Set ISA bit in entry-y for microMIPS kernels MIPS: Prevent building MT support for microMIPS kernels MIPS: PCI: Fix smp_processor_id() in preemptible MIPS: Introduce cpu_tcache_line_size MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression MIPS: VDSO: Fix clobber lists in fallback code paths Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>." MIPS: OCTEON: Fix USB platform code breakage. MIPS: Octeon: Fix broken EDAC driver. MIPS: gitignore: ignore generated .c files MIPS: Fix race on setting and getting cpu_online_mask MIPS: mm: remove duplicate "const" qualifier on insn_table
2017-08-13Merge tag 'driver-core-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three firmware core fixes for 4.13-rc5. All three of these fix reported issues and have been floating around for a few weeks. They have been in linux-next with no reported problems" * tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: avoid invalid fallback aborts by using killable wait firmware: fix batched requests - send wake up on failure on direct lookups firmware: fix batched requests - wake all waiters
2017-08-13Merge tag 'char-misc-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two patches for 4.13-rc5. One is a fix for a reported thunderbolt issue, and the other a fix for an MEI driver issue. Both have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Do not enumerate more ports from DROM than the controller has mei: exclude device from suspend direct complete optimization
2017-08-13Merge tag 'tty-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues" * tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: Delete dead code for CIR serial ports" tty: pl011: fix initialization order of QDF2400 E44
2017-08-13Merge tag 'staging-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code
2017-08-13Merge tag 'usb-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes and new device ids for 4.13-rc5. There is the usual gadget driver fixes, some new quirks for "messy" hardware, and some new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: pl2303: add new ATEN device id usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter USB: Check for dropped connection before switching to full speed usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume usb: renesas_usbhs: gadget: fix unused-but-set-variable warning usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get() usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets USB: serial: option: add D-Link DWM-222 device ID usb: musb: fix tx fifo flush handling again usb: core: unlink urbs from the tail of the endpoint's urb_list usb-storage: fix deadlock involving host lock and scsi_done uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 USB: hcd: Mark secondary HCD as dead if the primary one died USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
2017-08-13Merge branch 'clockevents/4.13-fixes' of ↵Ingo Molnar
http://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevents fixes from Daniel Lezcano: " - Fix error check against IS_ERR() instead of NULL for the timer-of code (Dan Carpenter) - Fix infinite recusion with ftrace for the ARM architected timer (Ding Tianhong) - Fix the error code return in the em_sti's probe function (Gustavo A. R. Silva) - Fix Kconfig dependency for the pistachio driver (Matt Redfearn) - Fix mem frame loop initialization for the ARM architected timer (Matthias Kaehlcke)" Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-12Merge tag 'for-linus-20170812' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull another MTD fix from Brian Norris: "An mtdblock regression occurred in -rc1 (all writes were broken!), in the process of some block subsystem refactoring. Noticed and fixed last week, but I'm a little slow on the uptake" * tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd: mtd: blkdevs: Fix mtd block write failure
2017-08-12mtd: blkdevs: Fix mtd block write failureAbhishek Sahu
All the MTD block write requests are failing with following error messages mkfs.ext4 /dev/mtdblock0 print_req_error: I/O error, dev mtdblock0, sector 0 Buffer I/O error on dev mtdblock0, logical block 0, lost async page write The control is going to default case after block write request because of missing return. Fixes: commit 2a842acab109 ("block: introduce new block status code type") Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "The highlights include: - Fix iscsi-target payload memory leak during ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash) - Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT (Pascal de Bruijn + Himanshu Madhani + nab) - Fix iscsi-target long-standing issue with parallel delete of a single network portal across multiple target instances (Gary Guo + nab) - Fix target dynamic se_node GPF during uncached shutdown regression (Justin Maggard + nab)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix node_acl demo-mode + uncached dynamic shutdown regression iscsi-target: Fix iscsi_np reset hung task during parallel delete qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2) cxgbit: fix sg_nents calculation iscsi-target: fix invalid flags in text response iscsi-target: fix memory leak in iscsit_setup_text_cmd() cxgbit: add missing __kfree_skb() tcmu: free old string on reconfig tcmu: Fix possible to/from address overflow when doing the memcpy
2017-08-12Merge tag 'for-linus-4.13b-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some fixes for Xen: - a fix for a regression introduced in 4.13 for a Xen HVM-guest configured with KASLR - a fix for a possible deadlock in the xenbus driver when booting the system - a fix for lost interrupts in Xen guests" * tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: Fix interrupt lost during irq_disable and irq_enable xen: avoid deadlock in xenbus xen: fix hvm guest with kaslr enabled xen: split up xen_hvm_init_shared_info() x86: provide an init_mem_mapping hypervisor hook
2017-08-11MD: not clear ->safemode for external metadata arrayShaohua Li
->safemode should be triggered by mdadm for external metadaa array, otherwise array's state confuses mdadm. Fixes: 33182d15c6bf(md: always clear ->safemode when md_check_recovery gets the mddev lock.) Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-08-11iomap: fix integer truncation issues in the zeroing and dirtying helpersChristoph Hellwig
Fix the min_t calls in the zeroing and dirtying helpers to perform the comparisms on 64-bit types, which prevents them from incorrectly being truncated, and larger zeroing operations being stuck in a never ending loop. Special thanks to Markus Stockhausen for spotting the bug. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-11xfs: fix inobt inode allocation search optimizationOmar Sandoval
When we try to allocate a free inode by searching the inobt, we try to find the inode nearest the parent inode by searching chunks both left and right of the chunk containing the parent. As an optimization, we cache the leftmost and rightmost records that we previously searched; if we do another allocation with the same parent inode, we'll pick up the search where it last left off. There's a bug in the case where we found a free inode to the left of the parent's chunk: we need to update the cached left and right records, but because we already reassigned the right record to point to the left, we end up assigning the left record to both the cached left and right records. This isn't a correctness problem strictly, but it can result in the next allocation rechecking chunks unnecessarily or allocating inodes further away from the parent than it needs to. Fix it by swapping the record pointer after we update the cached left and right records. Fixes: bd169565993b ("xfs: speed up free inode search") Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-08-11udp: harden copy_linear_skb()Eric Dumazet
syzkaller got crashes with CONFIG_HARDENED_USERCOPY=y configs. Issue here is that recvfrom() can be used with user buffer of Z bytes, and SO_PEEK_OFF of X bytes, from a skb with Y bytes, and following condition : Z < X < Y kernel BUG at mm/usercopy.c:72! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 2917 Comm: syzkaller842281 Not tainted 4.13.0-rc3+ #16 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d2fa40c0 task.stack: ffff8801d1fe8000 RIP: 0010:report_usercopy mm/usercopy.c:64 [inline] RIP: 0010:__check_object_size+0x3ad/0x500 mm/usercopy.c:264 RSP: 0018:ffff8801d1fef8a8 EFLAGS: 00010286 RAX: 0000000000000078 RBX: ffffffff847102c0 RCX: 0000000000000000 RDX: 0000000000000078 RSI: 1ffff1003a3fded5 RDI: ffffed003a3fdf09 RBP: ffff8801d1fef998 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d1ea480e R13: fffffffffffffffa R14: ffffffff84710280 R15: dffffc0000000000 FS: 0000000001360880(0000) GS:ffff8801dc000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000202ecfe4 CR3: 00000001d1ff8000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: check_object_size include/linux/thread_info.h:108 [inline] check_copy_size include/linux/thread_info.h:139 [inline] copy_to_iter include/linux/uio.h:105 [inline] copy_linear_skb include/net/udp.h:371 [inline] udpv6_recvmsg+0x1040/0x1af0 net/ipv6/udp.c:395 inet_recvmsg+0x14c/0x5f0 net/ipv4/af_inet.c:793 sock_recvmsg_nosec net/socket.c:792 [inline] sock_recvmsg+0xc9/0x110 net/socket.c:799 SYSC_recvfrom+0x2d6/0x570 net/socket.c:1788 SyS_recvfrom+0x40/0x50 net/socket.c:1760 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: b65ac44674dd ("udp: try to avoid 2 cache miss on dequeue") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11Merge branch 'bpf-Minor-fix-in-bpf_convert_ctx_access'David S. Miller
Daniel Borkmann says: ==================== bpf: Minor fix in bpf_convert_ctx_access First one was found while trying to compile the kernel with !CONFIG_NET_RX_BUSY_POLL. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11bpf: fix two missing target_size settings in bpf_convert_ctx_accessDaniel Borkmann
When CONFIG_NET_SCHED or CONFIG_NET_RX_BUSY_POLL is /not/ set and we try a narrow __sk_buff load of tc_index or napi_id, respectively, then verifier rightfully complains that it's misconfigured, because we need to set target_size in each of the two cases. The rewrite for the ctx access is just a dummy op, but needs to pass, so fix this up. Fixes: f96da09473b5 ("bpf: simplify narrower ctx access") Reported-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: fix compilation when busy poll is not enabledDaniel Borkmann
MIN_NAPI_ID is used in various places outside of CONFIG_NET_RX_BUSY_POLL wrapping, so when it's not set we run into build errors such as: net/core/dev.c: In function 'dev_get_by_napi_id': net/core/dev.c:886:16: error: ‘MIN_NAPI_ID’ undeclared (first use in this function) if (napi_id < MIN_NAPI_ID) ^~~~~~~~~~~ Thus, have MIN_NAPI_ID always defined to fix these errors. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11mISDN: Fix null pointer dereference at mISDN_FsmNewAnton Vasilyev
If mISDN_FsmNew() fails to allocate memory for jumpmatrix then null pointer dereference will occur on any write to jumpmatrix. The patch adds check on successful allocation and corresponding error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11nfp: do not update MTU from BH in flower appSimon Horman
The Flower app may receive a request to update the MTU of a representor netdev upon receipt of a control message from the firmware. This requires the RTNL lock which needs to be taken outside of the packet processing path. As a handling of this correctly seems a little to invasive for a fix simply skip setting the MTU for now. Relevant backtrace: [ 1496.288489] BUG: scheduling while atomic: kworker/0:3/373/0x00000100 [ 1496.294911] dca syscopyarea sysfillrect sysimgblt fb_sys_fops ptp drm mxm_wmi ahci pps_core libahci i2c_algo_bit wmi [last unloaded: nfp] [ 1496.294918] CPU: 0 PID: 373 Comm: kworker/0:3 Tainted: G OE 4.13.0-rc3+ #3 [ 1496.294919] Hardware name: Supermicro X10DRi/X10DRi, BIOS 2.0 12/28/2015 [ 1496.294923] Workqueue: events work_for_cpu_fn [ 1496.294924] Call Trace: [ 1496.294927] <IRQ> [ 1496.294931] dump_stack+0x63/0x82 [ 1496.294935] __schedule_bug+0x54/0x70 [ 1496.294937] __schedule+0x62f/0x890 [ 1496.294941] ? intel_unmap_sg+0x90/0x90 [ 1496.294942] schedule+0x36/0x80 [ 1496.294943] schedule_preempt_disabled+0xe/0x10 [ 1496.294945] __mutex_lock.isra.2+0x445/0x4a0 [ 1496.294947] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294950] ? kfree+0x162/0x170 [ 1496.294952] ? device_is_rmrr_locked+0x12/0x50 [ 1496.294953] ? iommu_should_identity_map+0x50/0xe0 [ 1496.294954] __mutex_lock_slowpath+0x13/0x20 [ 1496.294955] ? iommu_no_mapping+0x48/0xd0 [ 1496.294956] ? __mutex_lock_slowpath+0x13/0x20 [ 1496.294957] mutex_lock+0x2f/0x40 [ 1496.294960] rtnl_lock+0x15/0x20 [ 1496.294979] nfp_flower_cmsg_rx+0xc8/0x150 [nfp] [ 1496.294986] nfp_ctrl_poll+0x286/0x350 [nfp] [ 1496.294989] tasklet_action+0xf6/0x110 [ 1496.294992] __do_softirq+0xed/0x278 [ 1496.294993] irq_exit+0xb6/0xc0 [ 1496.294994] do_IRQ+0x4f/0xd0 [ 1496.294996] common_interrupt+0x89/0x89 Fixes: 948faa46c05b ("nfp: add support for control messages for flower app") Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: stmmac: Use the right logging function in stmmac_mdio_registerRomain Perier
Currently, the function stmmac_mdio_register() is only used by stmmac_dvr_probe() from stmmac_main.c, in order to register the MDIO bus and probe information about the PHY. As this function is called before calling register_netdev(), all messages logged from stmmac_mdio_register are prefixed by "(unnamed net_device)". The goal of netdev_info or netdev_err is to dump useful infos about a net_device, when this data structure is partially initialized, there is no point for using these functions. This commit fixes the issue by replacing all netdev_*() by the corresponding dev_*() function for logging. The last netdev_info is replaced by phy_attached_info(), as a valid phydev can be used at this point. Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net/sched/hfsc: allocate tcf block for hfsc root classKonstantin Khlebnikov
Without this filters cannot be attached. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11bonding: require speed/duplex only for 802.3ad, alb and tlbAndreas Born
The patch c4adfc822bf5 ("bonding: make speed, duplex setting consistent with link state") puts the link state to down if bond_update_speed_duplex() cannot retrieve speed and duplex settings. Assumably the patch was written with 802.3ad mode in mind which relies on link speed/duplex settings. For other modes like active-backup these settings are not required. Thus, only for these other modes, this patch reintroduces support for slaves that do not support reporting speed or duplex such as wireless devices. This fixes the regression reported in bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547). Fixes: c4adfc822bf5 ("bonding: make speed, duplex setting consistent with link state") Signed-off-by: Andreas Born <futur.andy@googlemail.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11net: dsa: ksz: fix skb freeingVivien Didelot
The DSA layer frees the original skb when an xmit function returns NULL, meaning an error occurred. But if the tagging code copied the original skb, it is responsible of freeing the copy if an error occurs. The ksz tagging code currently has two issues: if skb_put_padto fails, the skb copy is not freed, and the original skb will be freed twice. To fix that, move skb_put_padto inside both branches of the skb_tailroom condition, before freeing the original skb, and free the copy on error. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11Merge tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: "A few more NFS client bugfixes from me for rc5. Dros has a stable fix for flexfiles to prevent leaking the nfs4_ff_ds_version arrays when freeing a layout, Trond fixed a potential recovery loop situation with the TEST_STATEID operation, and Christoph fixed up the pNFS blocklayout Kconfig options to prevent unsafe use with kernels that don't have large block device support. Summary: Stable fix: - fix leaking nfs4_ff_ds_version array Other fixes: - improve TEST_STATEID OLD_STATEID handling to prevent recovery loop - require 64-bit sector_t for pNFS blocklayout to prevent 32-bit compile errors" * tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfs: pnfs/blocklayout: require 64-bit sector_t NFSv4: Ignore NFS4ERR_OLD_STATEID in nfs41_check_open_stateid() nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
2017-08-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes that should go into this series. This contains: - Fix from Bart for blk-mq requeue queue running, preventing a continued loop of run/restart. - Fix for a bio/blk-integrity issue, in two parts. One from Christoph, fixing where verification happens, and one from Milan, for a NULL profile. - NVMe pull request, most of the changes being for nvme-fc, but also a few trivial core/pci fixes" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: fix directive command numd calculation nvme: fix nvme reset command timeout handling nvme-pci: fix CMB sysfs file removal in reset path lpfc: support nvmet_fc defer_rcv callback nvmet_fc: add defer_req callback for deferment of cmd buffer return nvme: strip trailing 0-bytes in wwid_show block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time bio-integrity: only verify integrity on the lowest stacked driver bio-integrity: Fix regression if profile verify_fn is NULL
2017-08-11Merge tag 'mmc-v4.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - fix lockdep splat when removing mmc_block module - fix the logic for setting eMMC HS400ES signal voltage MMC host: - omap_hsmmc: add CMD23 capability to fix -EIO errors" * tag 'mmc-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: fix lockdep splat when removing mmc_block module mmc: mmc: correct the logic for setting HS400ES signal voltage mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver
2017-08-11Merge tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - allow user to disable write combined mapping in efifb driver (Dave Airlie) - fix use after free bugs on driver removal in imxfb driver (Dan Carpenter) - fix unused variable warning in omapfb driver (Arnd Bergmann) * tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linux: efifb: allow user to disable write combined mapping. fbdev: omapfb: remove unused variable video: fbdev: imxfb: use after free in imxfb_remove()
2017-08-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a few bugs in fuse" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: set mapping error in writepage_locked when it fails fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dio fuse: initialize the flock flag in fuse_file on allocation
2017-08-11Merge tag 'iommu-fixes-v4.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Fix a NULL-pointer dereference in arm_smmu_add_device" * tag 'iommu-fixes-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_device
2017-08-11pnfs/blocklayout: require 64-bit sector_tChristoph Hellwig
The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-08-11Merge tag 'powerpc-4.13-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "All fixes for code that went in this cycle. - a revert of an optimisation to the syscall exit path, which could lead to an oops on either older machines or machines with > 1TB of memory - disable some deep idle states if the firmware configuration for them fails - re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig change - six fairly small patches fixing bugs in our new watchdog code Thanks to: Gautham R Shenoy, Nicholas Piggin" * tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/watchdog: add locking around init/exit functions powerpc/watchdog: Fix marking of stuck CPUs powerpc/watchdog: Fix final-check recovered case powerpc/watchdog: Moderate touch_nmi_watchdog overhead powerpc/watchdog: Improve watchdog lock primitive powerpc: NMI IPI improve lock primitive powerpc/configs: Re-enable HARD/SOFT lockup detectors powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"
2017-08-11selftests: timers: freq-step: fix compile errorShuah Khan
Fix compile error due to ksft_exit_skip() update to take var_args. freq-step.c: In function ‘init_test’: freq-step.c:234:3: error: too few arguments to function ‘ksft_exit_skip’ ksft_exit_skip(); ^~~~~~~~~~~~~~ In file included from freq-step.c:26:0: ../kselftest.h:167:19: note: declared here static inline int ksft_exit_skip(const char *msg, ...) ^~~~~~~~~~~~~~ <builtin>: recipe for target 'freq-step' failed Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-08-11iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_deviceArtem Savkov
Commit c54451a "iommu/arm-smmu: Fix the error path in arm_smmu_add_device" removed fwspec assignment in legacy_binding path as redundant which is wrong. It needs to be updated after fwspec initialisation in arm_smmu_register_legacy_master() as it is dereferenced later. Without this there is a NULL-pointer dereference panic during boot on some hosts. Signed-off-by: Artem Savkov <asavkov@redhat.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-11xen/events: Fix interrupt lost during irq_disable and irq_enableLiu Shuo
Here is a device has xen-pirq-MSI interrupt. Dom0 might lost interrupt during driver irq_disable/irq_enable. Here is the scenario, 1. irq_disable -> disable_dynirq -> mask_evtchn(irq channel) 2. dev interrupt raised by HW and Xen mark its evtchn as pending 3. irq_enable -> startup_pirq -> eoi_pirq -> clear_evtchn(channel of irq) -> clear pending status 4. consume_one_event process the irq event without pending bit assert which result in interrupt lost once 5. No HW interrupt raising anymore. Now use enable_dynirq for enable_pirq of xen_pirq_chip to remove eoi_pirq when irq_enable. Signed-off-by: Liu Shuo <shuo.a.liu@intel.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11xen: avoid deadlock in xenbusJuergen Gross
When starting the xenwatch thread a theoretical deadlock situation is possible: xs_init() contains: task = kthread_run(xenwatch_thread, NULL, "xenwatch"); if (IS_ERR(task)) return PTR_ERR(task); xenwatch_pid = task->pid; And xenwatch_thread() does: mutex_lock(&xenwatch_mutex); ... event->handle->callback(); ... mutex_unlock(&xenwatch_mutex); The callback could call unregister_xenbus_watch() which does: ... if (current->pid != xenwatch_pid) mutex_lock(&xenwatch_mutex); ... In case a watch is firing before xenwatch_pid could be set and the callback of that watch unregisters a watch, then a self-deadlock would occur. Avoid this by setting xenwatch_pid in xenwatch_thread(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11Merge branch 'nvme-4.13' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fixes from Christoph: "A few more small fixes - the fc/lpfc update is the biggest by far."
2017-08-11clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is ↵Ding Tianhong
enabled On platforms with an arch timer erratum workaround, it's possible for arch_timer_reg_read_stable() to recurse into itself when certain tracing options are enabled, leading to stack overflows and related problems. For example, when PREEMPT_TRACER and FUNCTION_GRAPH_TRACER are selected, it's possible to trigger this with: $ mount -t debugfs nodev /sys/kernel/debug/ $ echo function_graph > /sys/kernel/debug/tracing/current_tracer The problem is that in such cases, preempt_disable() instrumentation attempts to acquire a timestamp via trace_clock(), resulting in a call back to arch_timer_reg_read_stable(), and hence recursion. This patch changes arch_timer_reg_read_stable() to use preempt_{disable,enable}_notrace(), which avoids this. This problem is similar to the fixed by upstream commit 96b3d28bf4 ("sched/clock: Prevent tracing recursion in sched_clock_cpu()"). Fixes: 6acc71ccac71 ("arm64: arch_timer: Allows a CPU-specific erratum to only affect a subset of CPUs") Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-11xen: fix hvm guest with kaslr enabledJuergen Gross
A Xen HVM guest running with KASLR enabled will die rather soon today because the shared info page mapping is using va() too early. This was introduced by commit a5d5f328b0e2baa5ee7c119fd66324eb79eeeb66 ("xen: allocate page for shared info page from low memory"). In order to fix this use early_memremap() to get a temporary virtual address for shared info until va() can be used safely. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11xen: split up xen_hvm_init_shared_info()Juergen Gross
Instead of calling xen_hvm_init_shared_info() on boot and resume split it up into a boot time function searching for the pfn to use and a mapping function doing the hypervisor mapping call. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11x86: provide an init_mem_mapping hypervisor hookJuergen Gross
Provide a hook in hypervisor_x86 called after setting up initial memory mapping. This is needed e.g. by Xen HVM guests to map the hypervisor shared info page. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11x86: Mark various structures and functions as 'static'Colin Ian King
Mark a couple of structures and functions as 'static', pointed out by Sparse: warning: symbol 'bts_pmu' was not declared. Should it be static? warning: symbol 'p4_event_aliases' was not declared. Should it be static? warning: symbol 'rapl_attr_groups' was not declared. Should it be static? symbol 'process_uv2_message' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Andrew Banman <abanman@hpe.com> # for the UV change Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/20170810155709.7094-1-colin.king@canonical.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized ↵Borislav Petkov
VMSAVE/VMLOAD" CPUID flag "virtual_vmload_vmsave" is what is going to land in /proc/cpuinfo now as per v4.13-rc4, for a single feature bit which is clearly too long. So rename it to what it is called in the processor manual. "v_vmsave_vmload" is a bit shorter, after all. We could go more aggressively here but having it the same as in the processor manual is advantageous. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Radim Krčmář <rkrcmar@redhat.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jörg Rödel <joro@8bytes.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm-ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/20170801185552.GA3743@nazgul.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependenciesMatt Redfearn
In v4.13, CLKSRC_PISTACHIO can select TIMER_OF on architectures without GENERIC_CLOCKEVENTS, resulting in a struct clock_event_device missing some required features and build breakage compiling timer_of.c. One of the symbols selecting TIMER_OF is CLKSRC_PISTACHIO, so add the dependency on GENERIC_CLOCKEVENTS. Thanks to kbuild test robot for finding this error (https://lkml.org/lkml/2017/7/16/249) Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Suggested-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-11clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULLDan Carpenter
The current code checks the return value of the of_io_request_and_map() function as it was returning a NULL pointer in case of error. However, it returns an error code encoded in the pointer return value, not a NULL value. Fix this by checking the returned pointer against IS_ERR() and return the error with PTR_ERR(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-11fuse: set mapping error in writepage_locked when it failsJeff Layton
This ensures that we see errors on fsync when writeback fails. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-08-11ALSA: seq: Fix CONFIG_SND_SEQ_MIDI dependencyTakashi Iwai
The commit 0181307abc1d ("ALSA: seq: Reorganize kconfig and build") rewrote the dependency of each sequencer module in a standard way, but there was one change applied mistakenly: CONFIG_SND_SEQ_MIDI isn't enabled properly by CONFIG_SND_RAWMIDI. I seem to have changed the wrong one instead, CONFIG_SND_SEQ_MIDI_EMUL, which is eventually reverse-selected by CONFIG_SND_SEQ_MIDI itself. This ended up the lack of snd-seq-midi module as reported below. The fix is to put def_tristate properly to CONFIG_SND_SEQ_MIDI instead of *_MIDI_EMUL entry. Fixes: 0181307abc1d ("ALSA: seq: Reorganize kconfig and build") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196633 Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 16:56:02 +0000