summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-20[media] gspca - jeilinj: add SPORTSCAM specific controlsPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: Add SPORTSCAM_DV15 camera supportPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: add 640*480 resolution supportPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: use gspca_dev->usb_err to forward error to upper layerPatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] gspca - jeilinj: suppress workqueuePatrice Chotard
Signed-off-by: Patrice CHOTARD <patricechotard@free.fr> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] tveeprom: update hauppauge tuner list thru 174Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] tveeprom: update hauppauge tuner list thru 169Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add more info about known board configsAntti Palosaari
Add some comments about known GPIO settings of supported board versions. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for two byte I2C addressAntti Palosaari
After that Anysee I2C adapter is capable of one and two byte long I2C addresses in case of read from I2C bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: enhance demod and tuner attachAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 DVB-TAntti Palosaari
Use correct I2C address for ZL10353 DVB-T demod. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 GPIOAntti Palosaari
Looks like it is IF route switch on IOE[0]. Set it correctly to route signal from tuner to demod. Now it works for DVB-C too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for Anysee E7 TCAntti Palosaari
It is ZL10353, TDA10023 and TDA18212. Tuner is inside of Samsung DNOD44CDH086A tuner module. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for TDA18212 based E30 Combo PlusAntti Palosaari
New models have new NXP TDA18212 silicon tuner. Not tested yet due to lack of HW... Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: reimplement demod and tuner attachAntti Palosaari
Use board ID as base value when selecting correct hardware configuration. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: change some messagesAntti Palosaari
Print firmware version as two digit long (change from 3 to 2). Windows app have changed that too. First byte was hard coded as 0. Change email list address to report non-working device to current one. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix multibyte I2C readAntti Palosaari
It can read more than one byte from I2C bus. Allow that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: I2C address fixAntti Palosaari
Switch from 8 bit notation to real 7 bit. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] NXP TDA18212HN silicon tuner driverAntti Palosaari
New silicon tuner driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] cx18: Bump driver version, since a new class of HVR-1600 is properly ↵Andy Walls
supported Make a user visible driver version change, for the inevitable user support questions about why newer model HVR-1600's do not work with (older versions of) the cx18 driver. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] cx18: Make RF analog TV work for newer HVR-1600 models with silicon ↵Andy Walls
tuners A previous changes which added the newer model HVR-1600's and DTV support for them, neglected to add RF analog TV for them. Fix RF analog TV for the newer HVR-1600's which have a worldwide analog tuner assembly with a TDA18271 tuner and TDA8295 demodulator. Thanks go to Jeff Campbell and Mike Bradley for reproting the problem, and also to Mike Bradley for doing a lot of the legwork to figure out the tuner reset GPIO line, the demodulator I2C address, and that the GPIOs have to be reinitialized after a cardtype switch. Reported-by: Jeff Campbell <jac1dlists@gmail.com> Tested-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: use mutex instead of semaphoreMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] Remove the now obsolete drx397xDMauro Carvalho Chehab
This was replaced by Micronas drxd driver Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20sched: Increase SCHED_LOAD_SCALE resolutionNikhil Rao
Introduce SCHED_LOAD_RESOLUTION, which scales is added to SCHED_LOAD_SHIFT and increases the resolution of SCHED_LOAD_SCALE. This patch sets the value of SCHED_LOAD_RESOLUTION to 10, scaling up the weights for all sched entities by a factor of 1024. With this extra resolution, we can handle deeper cgroup hiearchies and the scheduler can do better shares distribution and load load balancing on larger systems (especially for low weight task groups). This does not change the existing user interface, the scaled weights are only used internally. We do not modify prio_to_weight values or inverses, but use the original weights when calculating the inverse which is used to scale execution time delta in calc_delta_mine(). This ensures we do not lose accuracy when accounting time to the sched entities. Thanks to Nikunj Dadhania for fixing an bug in c_d_m() that broken fairness. Below is some analysis of the performance costs/improvements of this patch. 1. Micro-arch performance costs: Experiment was to run Ingo's pipe_test_100k 200 times with the task pinned to one cpu. I measured instruction, cycles and stalled-cycles for the runs. See: http://thread.gmane.org/gmane.linux.kernel/1129232/focus=1129389 for more info. -tip (baseline): Performance counter stats for '/root/load-scale/pipe-test-100k' (200 runs): 964,991,769 instructions # 0.82 insns per cycle # 0.33 stalled cycles per insn # ( +- 0.05% ) 1,171,186,635 cycles # 0.000 GHz ( +- 0.08% ) 306,373,664 stalled-cycles-backend # 26.16% backend cycles idle ( +- 0.28% ) 314,933,621 stalled-cycles-frontend # 26.89% frontend cycles idle ( +- 0.34% ) 1.122405684 seconds time elapsed ( +- 0.05% ) -tip+patches: Performance counter stats for './load-scale/pipe-test-100k' (200 runs): 963,624,821 instructions # 0.82 insns per cycle # 0.33 stalled cycles per insn # ( +- 0.04% ) 1,175,215,649 cycles # 0.000 GHz ( +- 0.08% ) 315,321,126 stalled-cycles-backend # 26.83% backend cycles idle ( +- 0.28% ) 316,835,873 stalled-cycles-frontend # 26.96% frontend cycles idle ( +- 0.29% ) 1.122238659 seconds time elapsed ( +- 0.06% ) With this patch, instructions decrease by ~0.10% and cycles increase by 0.27%. This doesn't look statistically significant. The number of stalled cycles in the backend increased from 26.16% to 26.83%. This can be attributed to the shifts we do in c_d_m() and other places. The fraction of stalled cycles in the frontend remains about the same, at 26.96% compared to 26.89% in -tip. 2. Balancing low-weight task groups Test setup: run 50 tasks with random sleep/busy times (biased around 100ms) in a low weight container (with cpu.shares = 2). Measure %idle as reported by mpstat over a 10s window. -tip (baseline): 06:47:48 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle intr/s 06:47:49 PM all 94.32 0.00 0.06 0.00 0.00 0.00 0.00 0.00 5.62 15888.00 06:47:50 PM all 94.57 0.00 0.62 0.00 0.00 0.00 0.00 0.00 4.81 16180.00 06:47:51 PM all 94.69 0.00 0.06 0.00 0.00 0.00 0.00 0.00 5.25 15966.00 06:47:52 PM all 95.81 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.19 16053.00 06:47:53 PM all 94.88 0.06 0.00 0.00 0.00 0.00 0.00 0.00 5.06 15984.00 06:47:54 PM all 93.31 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.69 15806.00 06:47:55 PM all 94.19 0.00 0.06 0.00 0.00 0.00 0.00 0.00 5.75 15896.00 06:47:56 PM all 92.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.13 15716.00 06:47:57 PM all 94.88 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.12 15982.00 06:47:58 PM all 95.44 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.56 16075.00 Average: all 94.49 0.01 0.08 0.00 0.00 0.00 0.00 0.00 5.42 15954.60 -tip+patches: 06:47:03 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle intr/s 06:47:04 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16630.00 06:47:05 PM all 99.69 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.31 16580.20 06:47:06 PM all 99.69 0.00 0.06 0.00 0.00 0.00 0.00 0.00 0.25 16596.00 06:47:07 PM all 99.20 0.00 0.74 0.00 0.00 0.06 0.00 0.00 0.00 17838.61 06:47:08 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16540.00 06:47:09 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16575.00 06:47:10 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16614.00 06:47:11 PM all 99.94 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.06 16588.00 06:47:12 PM all 99.94 0.00 0.06 0.00 0.00 0.00 0.00 0.00 0.00 16593.00 06:47:13 PM all 99.94 0.00 0.06 0.00 0.00 0.00 0.00 0.00 0.00 16551.00 Average: all 99.84 0.00 0.09 0.00 0.00 0.01 0.00 0.00 0.06 16711.58 We see an improvement in idle% on the system (drops from 5.42% on -tip to 0.06% with the patches). We see an improvement in idle% on the system (drops from 5.42% on -tip to 0.06% with the patches). Signed-off-by: Nikhil Rao <ncrao@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Stephan Barwolf <stephan.baerwolf@tu-ilmenau.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1305754668-18792-1-git-send-email-ncrao@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20sched: Introduce SCHED_POWER_SCALE to scale cpu_power calculationsNikhil Rao
SCHED_LOAD_SCALE is used to increase nice resolution and to scale cpu_power calculations in the scheduler. This patch introduces SCHED_POWER_SCALE and converts all uses of SCHED_LOAD_SCALE for scaling cpu_power to use SCHED_POWER_SCALE instead. This is a preparatory patch for increasing the resolution of SCHED_LOAD_SCALE, and there is no need to increase resolution for cpu_power calculations. Signed-off-by: Nikhil Rao <ncrao@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Stephan Barwolf <stephan.baerwolf@tu-ilmenau.de> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1305738580-9924-3-git-send-email-ncrao@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20sched: Cleanup set_load_weight()Nikhil Rao
Avoid using long repetitious names; make this simpler and nicer to read. No functional change introduced in this patch. Signed-off-by: Nikhil Rao <ncrao@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Stephan Barwolf <stephan.baerwolf@tu-ilmenau.de> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1305738580-9924-2-git-send-email-ncrao@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Move the common bits to x2apic.hCyrill Gorcunov
To eliminate code duplication. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.591426753@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Minimize IPI register writes using cluster groupsCyrill Gorcunov
In the case of x2apic cluster mode we can group IPI register writes based on the cluster group instead of individual per-cpu destination messages. This reduces the apic register writes and reduces the amount of IPI messages (in the best case we can reduce it by a factor of 16). With this change, the cost of flush_tlb_others(), with the flush tlb IPI being sent from a cpu in the socket-1 to all the logical cpus in socket-2 (on a Westmere-EX system that has 20 logical cpus in a socket) is 3x times better now (compared to the former 'send one-by-one' algorithm). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.512271057@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Track the x2apic cluster sibling mapCyrill Gorcunov
In the case of x2apic cluster mode, we can group IPI register writes based on the cluster group instead of individual per-cpu destination messages. For this purpose, track the cpu's that belong to the same x2apic cluster. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.421800999@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Remove duplicate code for IPI mask routinesSuresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.337024125@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, apic: Use probe routines to simplify apic selectionSuresh Siddha
Use the unused probe routine in the apic driver to finalize the apic model selection. This cleans up the default_setup_apic_routing() and this probe routine in future can also be used for doing any apic model specific initialisation. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233158.089978277@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate gsi routing info into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.994002011@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.830697056@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Add struct ioapicSuresh Siddha
Introduce struct ioapic with nr_registers field. This will pave way for consolidating different MAX_IO_APICS arrays into it. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.744315519@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Remove duplicate code for saving/restoring RTEsSuresh Siddha
Code flow for enabling interrupt-remapping has its own routines for saving and restoring io-apic RTE's. ioapic suspend/resume code flow also has similar routines. Remove the duplicate code. Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110518233157.673130611@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Use ioapic_saved_data while enabling intr-remappingSuresh Siddha
Code flow for enabling interrupt-remapping was allocating/freeing buffers for saving/restoring io-apic RTE's. ioapic suspend/resume code uses boot time allocated ioapic_saved_data that is a perfect match for reuse here. This will remove the unnecessary allocation/free of the temporary buffers during suspend/resume of interrupt-remapping enabled platforms aswell as paving the way for further code consolidation. Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110518233157.574469296@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Allocate ioapic_saved_data earlySuresh Siddha
This allows re-using this buffer for enabling interrupt-remapping during boot and resume. And thus allow for consolidating the code between ioapic suspend/resume and interrupt-remapping. Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110518233157.481404505@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Fix potential resume deadlockDaniel J Blueman
Fix a potential deadlock when resuming; here the calling function has disabled interrupts, so we cannot sleep. Change the memory allocation flag from GFP_KERNEL to GFP_ATOMIC. TODO: We can do away with this memory allocation during resume by reusing the ioapic suspend/resume code that uses boot time allocated buffers, but we want to keep this -stable patch simple. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: <stable@kernel.org> # v2.6.38/39 Link: http://lkml.kernel.org/r/20110518233157.385970138@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCEBenjamin Tissoires
Stantum devices used to work with MT_CLS_STANTUM but MT_CLS_CONFIDENCE is exactly the same. This patch switches them to this generic class, and remove the unused MT_CLS_STANTUM. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for Unitec panelsBenjamin Tissoires
This patch introduce support for Unitec panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for Touch International panelsBenjamin Tissoires
This patch introduce support for Touch International panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for GoodTouch panelsBenjamin Tissoires
This patch introduce support for GoodTouch panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for CVTouch panelsBenjamin Tissoires
This patch introduce support for CVTouch panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20HID: hid-multitouch: add support for ActionStar panelsBenjamin Tissoires
This patch introduce support for ActionStar panels. This device has not been optimized in term of kernel processing operations (default class), but it will work. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-20x86, amd: Use _safe() msr access for GartTlbWlk disable codeRoedel, Joerg
The workaround for Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=33012 introduced a read and a write to the MC4 mask msr. Unfortunatly this MSR is not emulated by the KVM hypervisor so that the kernel will get a #GP and crashes when applying this workaround when running inside KVM. This issue was reported as: https://bugzilla.kernel.org/show_bug.cgi?id=35132 and is fixed with this patch. The change just let the kernel ignore any #GP it gets while accessing this MSR by using the _safe msr access methods. Reported-by: Török Edwin <edwintorok@gmail.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> # .39.x Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20[media] drxd: CodingStyle cleanupsMauro Carvalho Chehab
There are still lots of 80-columns warnings and a few errors at some tables, but changing them would require more work and with probably not much gain. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: Don't use a macro for CHK_ERROR with a break insideMauro Carvalho Chehab
The macro is defined as: #define CHK_ERROR(s) if( (status = s)<0 ) break This sucks, as makes harder to debug if something got wrong and there are more than one level of loops. Also, violates CodingStyle. Fixed by this simple perl script: while (<>) { $f.=$_; }; $f=~ s,\n\#define CHK_ERROR[^\n]+\n,\n,; $f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g; $f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g; $f=~ s=(CHK_ERROR\(.*\,)\n\s+=\1 =g; $f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g; $f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g; $f=~ s=(CHK_ERROR\(.*)\s+(\,)\n\s+=\1\2 =g; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;,\n\1status = \2;\n\1if (status < 0)\n\1\tbreak;,g; print $f; Plus a few manual adjustments Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] drxd: Fix some CodingStyle issuesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-19 00:21:14 +0000