summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-17net: use hlist_del_rcu() in dev_change_name()Eric Dumazet
Using plain hlist_del() in dev_change_name() is wrong since a concurrent reader can crash trying to dereference LIST_POISON1. Bug introduced in commit 72c9528bab94 (net: Introduce dev_get_by_name_rcu()) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17ALSA: hda - Enable snoop bit for AMD controllersTakashi Iwai
AMD Hudson controllers give noisy outputs when the buffer data is rewritten on the fly as PulseAudio does. This seems fixed by the snoop bit enabled just like ATI chipset. Also, disable 64bit DMA as now, to be sure. We can revisit this later. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17Input: tsc2007 - add X, Y and Z fuzz factors to platform dataThierry Reding
These new platform-specific values can be used to set the fuzz parameter passed to the input_set_abs_params() function for the ABS_X, ABS_Y and ABS_PRESSURE axes. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add poll_period parameter to platform dataThierry Reding
This new parameter allows the polling frequency to be configured while keeping the default of once every millisecond. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add poll_delay parameter to platform dataThierry Reding
Depending on the quality of the touch panel, the time for the X-, X+, Y- and Y+ inputs to settle may vary. The poll_delay parameter can be used to override the default of 1 millisecond. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - add max_rt parameter to platform dataThierry Reding
Finger touch events or very quick stylus events on low-quality panels can cause the tsc2007 to read bogus values. Looking at oscilloscope snapshots, this seems to be caused by the touch event disappearing during the measurements. These bogus values result in misclicks, where the X and Y values deviate from the real position. Most of these misclicks can be filtered out by setting a low enough threshold for the maximum resistance (which is loosely the inverse of the pressure) allowed to consider a set of values valid. Since this behaviour is largely dependent on the type and quality of the panel, this commit introduces the max_rt parameter. The default value is kept at MAX_12BIT. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Input: tsc2007 - debounce pressure measurementThierry Reding
When the controller signals a pen-down event via the platform-specific GPIO, while the sample values indicate an invalid measurement, the measurement needs to be repeated. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-17Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tick: Clear broadcast active bit when switching to oneshot rtc: mc13xxx: Don't call rtc_device_register while holding lock rtc: rp5c01: Initialize drvdata before registering device rtc: pcap: Initialize drvdata before registering device rtc: msm6242: Initialize drvdata before registering device rtc: max8998: Initialize drvdata before registering device rtc: max8925: Initialize drvdata before registering device rtc: m41t80: Initialize clientdata before registering device rtc: ds1286: Initialize drvdata before registering device rtc: ep93xx: Initialize drvdata before registering device rtc: davinci: Initialize drvdata before registering device rtc: mxc: Initialize drvdata before registering device clocksource: Install completely before selecting
2011-05-17x86, AMD: Fix ARAT feature setting againBorislav Petkov
Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-17Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors"Borislav Petkov
This reverts commit e20a2d205c05cef6b5783df339a7d54adeb50962, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-17Merge branch 'gart/rename' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu
2011-05-17jbd/jbd2: remove obsolete summarise_journal_usage.Tao Ma
summarise_journal_usage seems to be obsolete for a long time, so remove it. Cc: Jan Kara <jack@suse.cz> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-17jbd: Fix forever sleeping process in do_get_write_access()Jan Kara
In do_get_write_access() we wait on BH_Unshadow bit for buffer to get from shadow state. The waking code in journal_commit_transaction() has a bug because it does not issue a memory barrier after the buffer is moved from the shadow state and before wake_up_bit() is called. Thus a waitqueue check can happen before the buffer is actually moved from the shadow state and waiting process may never be woken. Fix the problem by issuing proper barrier. CC: stable@kernel.org Reported-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-17ext2: fix error msg when mounting fs with too-large blocksizeRobin Dong
When ext2 mounts a filesystem, it attempts to set the block device blocksize with a call to sb_set_blocksize, which can fail for several reasons. The current failure message in ext2 prints: EXT2-fs (loop1): error: blocksize is too small which is not correct in all cases. This can be demonstrated by creating a filesystem with # mkfs.ext2 -b 8192 on a 4k page system, and attempting to mount it. Change the error message to a more generic: EXT2-fs (loop1): bad blocksize 8192 to match the error message in ext3. Signed-off-by: Robin Dong <sanbai@taobao.com> Reviewed-by: Coly Li <bosong.ly@taobao.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-17jbd: fix fsync() tid wraparound bugTed Ts'o
If an application program does not make any changes to the indirect blocks or extent tree, i_datasync_tid will not get updated. If there are enough commits (i.e., 2**31) such that tid_geq()'s calculations wrap, and there isn't a currently active transaction at the time of the fdatasync() call, this can end up triggering a BUG_ON in fs/jbd/commit.c: J_ASSERT(journal->j_running_transaction != NULL); It's pretty rare that this can happen, since it requires the use of fdatasync() plus *very* frequent and excessive use of fsync(). But with the right workload, it can. We fix this by replacing the use of tid_geq() with an equality test, since there's only one valid transaction id that is valid for us to start: namely, the currently running transaction (if it exists). CC: stable@kernel.org Reported-by: Martin_Zielinski@McAfee.com Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-17ext3: Fix fs corruption when make_indexed_dir() failsJan Kara
When make_indexed_dir() fails (e.g. because of ENOSPC) after it has allocated block for index tree root, we did not properly mark all changed buffers dirty. This lead to only some of these buffers being written out and thus effectively corrupting the directory. Fix the issue by marking all changed data dirty even in the error failure case. CC: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz>
2011-05-17ALSA: hda - Handle dock line-in as auto-detecable for Cxt auto-parserTakashi Iwai
Similar process like in patch_realtek.c and patch_sigmatel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Handle dock line-in as auto-detectable for IDT codecsTakashi Iwai
When a docking-station has a line-in jack, we can handle it also as a detectable jack just like mic-in. This will improve the usability of HP laptops with a docking-station. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Add dock-mic detection support to Realtek auto-parserTakashi Iwai
In addition to the normal mic jack, the mic (or line-in) jack on the docking-station is checked also as a candidate for auto-selection. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Check unsol-cap in is_jack_detectalbe()Takashi Iwai
Also replace more open-codes with this function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Add support of dock-mic detection to Conexant auto-parserTakashi Iwai
In addition to the normal external mic jack, check also the mic jack on a docking-station as well, and select the input source appropriately. The similar functionality was already implemented in patch_sigmatel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17Kconfig: fix copy/paste-ism for dell-wmi-aio driverRafi Rubin
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-17scsi: remove performance regression due to async queue runJens Axboe
Commit c21e6beb removed our queue request_fn re-enter protection, and defaulted to always running the queues from kblockd to be safe. This was a known potential slow down, but should be safe. Unfortunately this is causing big performance regressions for some, so we need to improve this logic. Looking into the details of the re-enter, the real issue is on requeue of requests. Requeue of requests upon seeing a BUSY condition from the device ends up re-running the queue, causing traces like this: scsi_request_fn() scsi_dispatch_cmd() scsi_queue_insert() __scsi_queue_insert() scsi_run_queue() scsi_request_fn() ... potentially causing the issue we want to avoid. So special case the requeue re-run of the queue, but improve it to offload the entire run of local queue and starved queue from a single workqueue callback. This is a lot better than potentially kicking off a workqueue run for each device seen. This also fixes the issue of the local device going into recursion, since the above mentioned commit never moved that queue run out of line. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-17doc: timers-howto: fix a typo ("unsgined")Jonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-17ALSA: hda - Fix initialization of spec->automute_lines in patch_realtek.cTakashi Iwai
spec->automute_lines shouldn't be set unless the line-detection is available. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Use get_wcaps_type()Takashi Iwai
Replace the open-code with get_wcaps_type() macro. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Use is_jack_detectable() helperTakashi Iwai
Replaced the open-code with the new helper function. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17ALSA: hda - Add automute-mode enum to Conexant auto-parserTakashi Iwai
Implement the same functionality as Realtek's auto-mute mode control. Now Conexant auto-parser can also mutes line-out and provide the enum control for different automute behavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17[SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature.Joe Carnuccio
Eliminate duplicate code by refactoring the calls to qla2xxx_read_sfp() in qla2x00_get_thermal_temp(). This keeps the parameter values separate from the mailbox register mechanics. This also allows qla2xxx_read_sfp() to be the sole "spec" for READ SFP semantics. Signed-off_by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.Joe Carnuccio
Make the read/write sfp mailbox command routines uniform, and remove redundancy. Also protect against attempting to do a single byte dma in these routines. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Clear complete initialization control block.Andrew Vasquez
Use proper init_cb_size member which takes into account MID/non-MID init-cb structure sizes. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Allow an override of the registered maximum LUN.Andrew Vasquez
The 'max_lun' value registered for each scsi_host is currently capped at 0xffff. The new module parameter can allow for 2nd-level flat-space addressing method-infrastructure to be supported. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Add host number in reset and quiescent message logs.Saurav Kashyap
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Correctly read sfp single byte mailbox register.Joe Carnuccio
When reading a single byte using the READ SFP mailbox command, the single byte of data is returned in MB[1] and not MB[8]. The reason that MB[8] was being used is that the spec was unclear as it evolved over time; and we have not needed to read a single byte until recently. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Add qla82xx_rom_unlock() function.Chad Dupuis
Encapsulate the unlocking of the ROM lock in a function for better code readability. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Log if qla82xx firmware fails to load from flash.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Use passed in host to initialize local scsi_qla_host in ↵Madhuranath Iyengar
queuecommand function Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Correct buffer start in edc sysfs debug print.Joe Carnuccio
The debug print prints the first byte of the buffer which is buf[8]. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Update firmware version after flash update for ISP82xx.Saurav Kashyap
The driver keeps a copy of the fw_version within the ha structure. For ISP82xx, this local copy doesn't get updated, and as a result, the old firmware version ends up getting displayed. This patch fixes this issue. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Fix hang during driver unload when vport is active.Arun Easi
Bumping ref count during fc_vport_terminate() was the cause. vport delete would wait for ref count to drop to zero and that would never happen. Cc: stable@kernel.org Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6.Andrew Vasquez
The firmware spec has the fcp_data_dseg_len defined as a 32-bit value, while the corresponding field in the driver structure has it defined as a 16-bit value. Cc: stable@kernel.org Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Fix virtual port failing to login after chip reset.Saurav Kashyap
This patch ensures qla82xx_watchdog is not being run for the vport. It also makes sure that beacon ON is not done for the vport, as it will lead to the waking up of the dpc thread again and again. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] qla2xxx: Fix vport delete hang when logins are outstanding.Arun Easi
Timer is required to flush out entries that may be present in work queues. Cc: stable@kernel.org Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr)Joe Perches
Not at all sure this is correct or appropriate to change, but this seems odd. Found via coccinelle script @@ type T; T* ptr; expression E1; @@ * memset(E1, 0, sizeof(ptr)); Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17ALSA: hda - Add missing Front/Surround/CLFE as slaves for Cxt auto-parserTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17[SCSI] ipr: Rate limit DMA mapping errorsAnton Blanchard
I noticed a stream of errors from the IPR driver while doing IOMMU fault injection. Rate limit the errors so we don't clog up the console and logfiles. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17ALSA: hda - Code refactoring in patch_conexant.cTakashi Iwai
Use a struct instead of each array for managing input-source info for auto-parser. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-17[SCSI] hpsa: add P2000 to list of shared SAS devicesStephen M. Cameron
Signed-off-by: Scott Teel <scott.stacy.teel@hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] hpsa: do not attempt PCI power management reset method if we know it ↵Stephen M. Cameron
won't work. Just go straight to the soft-reset method instead. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17[SCSI] hpsa: remove superfluous sleeps around reset codeStephen M. Cameron
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: James Bottomley <jbottomley@parallels.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit (git 2.34.1) at 2025-09-24 12:55:48 +0000