| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a device table used for blacklisting devices. We currently
blacklist the motion sensor subdevice of THQ Udraw and Sony ds3/ds4.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
[dtor: siwtched to blacklist built on input_device_id and using
input_match_device_id()]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Let's allow matching input devices on their property bits, both in-kernel
and when generating module aliases.
Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Factor out and export input_match_device_id() so that modules may use it.
It will be needed by joydev to blacklist accelerometers in composite
devices.
Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Goodix panel triggers an interrupt on touch events. However, its
registers will contain the valid values a short time after the
interrupt, and not when it's raised. At that moment, the 'buffer status'
bit is set.
Previously, if the 'buffer status' bit was not set when the registers
were read, the data was discarded and no input event was emitted,
causing "finger down" or "finger up" events to be missed sometimes.
This went unnoticed until v4.9, as the DesignWare I2C driver commonly
used with this driver had enough latency for that bug to never trigger
until commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only
if necessary").
Now, in the IRQ handler we will poll (with a timeout) the 'buffer status'
bit and process the data of the panel as soon as this bit gets set.
Note that the Goodix panel will send a few spurious interrupts after the
'finger up' event, in which the 'buffer status' bit will never be set.
Cc: Bastien Nocera <hadess@hadess.net>
Cc: russianneuromancer@ya.ru
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[hdegoede@redhat.com: Change poll loop to use jiffies,
add comment about typical poll time]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[dtor: rearranged control flow a bit to avoid explicit goto and double
check]
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Now that we have a platform_device_id table and multiple supported ids
we should be using MODULE_DEVICE_TABLE instead of MODULE_ALIAS.
This fixes a regression on Bay and Cherry Trail devices, where the power
button is now enumerated as an "axp221-pek" and it was impossible to
wakeup these devices from suspend since the module did not load.
Fixes: c3cc94470bd3 ("Input: axp20x-pek - add support for AXP221 PEK")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently, enabling keypad interrupts is one of the first operations
done on the keypad, even before the interrupt is requested, so there is
a small time window where the keypad can fire interrupts but the driver
is not yet ready to handle them. It's fine for level interrupts because
they will be handled anyway, but not so much for edge ones.
This commit modifies and moves the function in charge of configuring the
keypad. Enabling interrupts is now the last thing done on the keypad,
and after the interrupt has been requested by the driver.
Writing to the config register was also used to determine if the device
was indeed present on the bus or not, this has been replaced by reading
the lock/event count register to keep the same functionality.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Three small important fixes for the parisc architecture:
- Export __cmpxchg_u64() symbol on 32bit kernel too. This unbreaks
building the kernel with ixgbe kernel module. From Guenter Roeck.
- Fix 64-bit atomic cmpxchg kernel helper function for 32-bit kernel
in LWS code for userspace. This unbreaks e.g. the 64-bit variant of
the glibc function __sync_fetch_and_add() with a 32-bit parisc
kernel. From John David Anglin, tagged for backport to v3.13+.
- Detect nonsynchronous CPU-internal cr16 cycle counters more
reliable. This avoids stalled CPU warnings by the kernel soft
lockup detector. From me, tagged for backport to v4.13+"
* 'parisc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix detection of nonsynchronous cr16 cycle counters
parisc: Export __cmpxchg_u64 unconditionally
parisc: Fix double-word compare and exchange in LWS code on 32-bit kernels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We've got slightly more fixes than wished, but heading to a good
shape. Most of changes are about HD-audio fixes, one for a buggy code
that went into 4.13, and another for avoiding a crash due to buggy
BIOS.
Apart from HD-audio, a sequencer core change that is only for UP
config (which must be pretty rare nowadays), and a USB-audio quirk as
usual"
* tag 'sound-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal
ALSA: hda: Remove superfluous '-' added by printk conversion
ALSA: hda: Abort capability probe at invalid register read
ALSA: seq: Enable 'use' locking in all configurations
ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 Digital
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Pull "Renesas ARM Based SoC Fixes for v4.14" from Simon Horman:
Add 12V regulator to backlight allowing the power supply
for the backlight to be found.
* tag 'renesas-fixes-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: salvator-common: add 12V regulator to backlight
|
|
The commit afece3ab9a36 ("PM / Domains: Add time accounting to various
genpd states") causes a boot regression for ux500.
The problem occurs when the ux500 machine code calls pm_genpd_init(), which
since the above change triggers a call to ktime_get(). More precisely,
because ux500 initializes PM domains in the init_IRQ() phase of the boot,
timekeeping has not yet been initialized.
Fix the problem by moving the initialization of the PM domains to after
timekeeping has been initialized.
Fixes: afece3ab9a36 ("PM / Domains: Add time accounting to various genpd..")
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These platforms provide a clock to their watchdog, in each
case this is the peripheral clock (PCLK), so explicitly
name the clock in the device tree.
Take this opportunity to add the "faraday,ftwdt010"
compatible as fallback to the watchdog IP blocks.
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into fixes
Pull "Reset controller fixes for v4.14" from Philipp Zabel:
Fix SoCFPGA reset controller for 64-bit systems. This patch removes the
assumption that BITS_PER_LONG is 32, which is not the case on Stratix10.
* tag 'reset-fixes-for-4.14-2' of git://git.pengutronix.de/git/pza/linux:
reset: socfpga: fix for 64-bit compilation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Pull "Rockchip dts64 Fixes for 4.14 part 2" from Heiko Stübner:
The vqmmc voltages on rk3399 pose a risk for the chip if they
exceed 3.0V, so they got fixed to not be at 3.3V
And Arnd found a typo in the recently added iommu nodes.
* tag 'v4.14-rockchip-dts64fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix typo in iommu nodes
arm64: dts: rockchip: correct vqmmc voltage for rk3399 platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Pull "i.MX fixes for 4.14" from Shawn Guo:
- Fix the legacy PCI interrupt numbers for i.MX7. The numbers were
wrongly coded in an inverted order than what Reference Manual tells.
It causes problem for PCI devices using legacy interrupt.
* tag 'imx-fixes-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d: Invert legacy PCI irq mapping
|
|
Pull "mvebu fixes for 4.14 (part 2)" from Gregory CLEMENT
Two device tree related fixes:
- One on Armada 38x using a other compatible string for I2C in order
to cover an errata.
- One for Armada 7K/8K fixing a typo on interrupt-map property for
PCIe leading to fail PME and AER root port service initialization
And the last one for the mbus fixing the window size calculation when
it exceed 32bits
* tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu:
bus: mbus: fix window size calculation for 4GB windows
ARM: dts: Fix I2C repeated start issue on Armada-38x
arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Fixes: second batch for 4.14:
- one DT phy address fix for the new sama5d27 som1 ek
- two DT ADC patches that were forgotten while moving to
hardware triggers for sama5d2 (iio changes already applied)
* tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: dts: at91: sama5d2: add ADC hw trigger edge type
ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
ARM: dts: at91: at91-sama5d27_som1: fix PHY ID
|
|
http://github.com/Broadcom/stblinux into fixes
Pull "Broadcom devicetree fixes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.14,
please pull the following:
- Loic fixes the console path on the Raspberry Pi 3 which was not correctly set
and would cause all sorts of confusion between the Bluetooth controller and the
kernel console
* tag 'arm-soc/for-4.14/devicetree-fixes' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix console path on RPi3
|
|
dql_init always returned 0, and the only place that uses it
in network core code didn't care about the return value anyway.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case I replaced the "NOBREAK" comment with
a "fall through" comment, which is what GCC is expecting to find.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NULL check before freeing functions like kfree is not needed.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thomas Falcon says:
====================
ibmvnic: Enable SG and TSO feature support
This patch set is fairly straightforward. The first patch enables
scatter-gather support in the ibmvnic driver. The following patch
then enables the TCP Segmentation offload feature. The final patch
allows users to enable or disable net device features using ethtool.
Enabling SG and TSO grants a large increase in throughput with TX
speed increasing from 1Gb/s to 9Gb/s in our initial test runs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables TSO support. It includes additional
buffers reserved exclusively for large packets. Throughput
is greatly increased with TSO enabled, from about 1 Gb/s to
9 Gb/s on our test systems.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables scatter gather support. Since there is no
HW/FW scatter-gather support at this time, the driver needs to
loop through each fragment and copy it to a contiguous, pre-mapped
buffer entry.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller hit the WARN() in tun_get_user(), providing skb
with payload in fragments only, and nothing in skb->head
GRO layer is fine with this, so relax the check.
Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now when peeling off an association to the sock in another netns, all
transports in this assoc are not to be rehashed and keep use the old
key in hashtable.
As a transport uses sk->net as the hash key to insert into hashtable,
it would miss removing these transports from hashtable due to the new
netns when closing the sock and all transports are being freeed, then
later an use-after-free issue could be caused when looking up an asoc
and dereferencing those transports.
This is a very old issue since very beginning, ChunYu found it with
syzkaller fuzz testing with this series:
socket$inet6_sctp()
bind$inet6()
sendto$inet6()
unshare(0x40000000)
getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST()
getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF()
This patch is to block this call when peeling one assoc off from one
netns to another one, so that the netns of all transport would not
go out-sync with the key in hashtable.
Note that this patch didn't fix it by rehashing transports, as it's
difficult to handle the situation when the tuple is already in use
in the new netns. Besides, no one would like to peel off one assoc
to another netns, considering ipaddrs, ifaces, etc. are usually
different.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
bpf: Fix for BPF devmap percpu allocation splat
The set fixes a splat in devmap percpu allocation when we alloc
the flush bitmap. Patch 1 is a prerequisite for the fix in patch 2,
patch 1 is rather small, so if this could be routed via -net, for
example, with Tejun's Ack that would be good. Patch 3 gets rid of
remaining PCPU_MIN_UNIT_SIZE checks, which are percpu allocator
internals and should not be used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCPU_MIN_UNIT_SIZE is an implementation detail of the percpu
allocator. Given we support __GFP_NOWARN now, lets just let
the allocation request fail naturally instead. The two call
sites from BPF mistakenly assumed __GFP_NOWARN would work, so
no changes needed to their actual __alloc_percpu_gfp() calls
which use the flag already.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was reported that syzkaller was able to trigger a splat on
devmap percpu allocation due to illegal/unsupported allocation
request size passed to __alloc_percpu():
[ 70.094249] illegal size (32776) or align (8) for percpu allocation
[ 70.094256] ------------[ cut here ]------------
[ 70.094259] WARNING: CPU: 3 PID: 3451 at mm/percpu.c:1365 pcpu_alloc+0x96/0x630
[...]
[ 70.094325] Call Trace:
[ 70.094328] __alloc_percpu_gfp+0x12/0x20
[ 70.094330] dev_map_alloc+0x134/0x1e0
[ 70.094331] SyS_bpf+0x9bc/0x1610
[ 70.094333] ? selinux_task_setrlimit+0x5a/0x60
[ 70.094334] ? security_task_setrlimit+0x43/0x60
[ 70.094336] entry_SYSCALL_64_fastpath+0x1a/0xa5
This was due to too large max_entries for the map such that we
surpassed the upper limit of PCPU_MIN_UNIT_SIZE. It's fine to
fail naturally here, so switch to __alloc_percpu_gfp() and pass
__GFP_NOWARN instead.
Fixes: 11393cc9b9be ("xdp: Add batching support to redirect map")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Shankara Pailoor <sp3485@columbia.edu>
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an option for pcpu_alloc() to support __GFP_NOWARN flag.
Currently, we always throw a warning when size or alignment
is unsupported (and also dump stack on failed allocation
requests). The warning itself is harmless since we return
NULL anyway for any failed request, which callers are
required to handle anyway. However, it becomes harmful when
panic_on_warn is set.
The rationale for the WARN() in pcpu_alloc() is that it can
be tracked when larger than supported allocation requests are
made such that allocations limits can be tweaked if warranted.
This makes sense for in-kernel users, however, there are users
of pcpu allocator where allocation size is derived from user
space requests, e.g. when creating BPF maps. In these cases,
the requests should fail gracefully without throwing a splat.
The current work-around was to check allocation size against
the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for
bailing out prior to a call to pcpu_alloc() in order to
avoid throwing the WARN(). This is bad in multiple ways since
PCPU_MIN_UNIT_SIZE is an implementation detail, and having
the checks on call-sites only complicates the code for no
good reason. Thus, lets fix it generically by supporting the
__GFP_NOWARN flag that users can then use with calling the
__alloc_percpu_gfp() helper instead.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pointer opt has a null check however before for this check opt is
dereferenced when len is initialized, hence we potentially have a null
pointer deference on opt. Avoid this by checking for a null opt before
dereferencing it.
Detected by CoverityScan, CID#1458234 ("Dereference before null check")
Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a problem when we do:
sequence = pkg->hdr.length_sn & TBIP_HDR_SN_MASK;
sequence >>= TBIP_HDR_SN_SHIFT;
TBIP_HDR_SN_SHIFT is 27, and right shifting a u8 27 bits is always
going to result in zero. The fix is to declare these variables as u32.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The problematic code looks like this:
res_seq = res_hdr->xd_hdr.length_sn & TB_XDOMAIN_SN_MASK;
res_seq >>= TB_XDOMAIN_SN_SHIFT;
TB_XDOMAIN_SN_SHIFT is 27, and right shifting a u8 27 bits is always
going to result in zero. The fix is to declare these variables as u32.
Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netanel Belgazal says:
====================
update ENA driver to releawse 1.3.0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new statistic to ethtool stats that show the number of packets
without transmit acknowledgement from ENA device.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove ena_device_io_suspend/resume() methods
Those methods were intend to be used by the device to trigger
suspend/resume but eventually it was dropped.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ena admin commands timeout is in resolutions of 100ms.
Therefore, When the driver works in polling mode, it sleeps for 100ms
each time. The overall boot time of the ENA driver is ~1.5 sec.
To reduce the boot time, This change modifies the granularity of
the sleeps to 5ms.
This change improves the boot time to 220ms.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Netanel Belgazal says:
====================
ENA ethernet driver bug fixes
Some fixes for ENA ethernet driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ethtool ena_get_channels() expose the max number of queues as the max
number of queues ENA supports (128 queues) and not the actual number
of created queues.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This failure is rare and only found on testing where deliberately fail
devm_ioremap()
[ 451.170464] ena 0000:04:00.0: failed to remap regs bar
451.170549] Workqueue: pciehp-1 pciehp_power_thread
[ 451.170551] task: ffff88085a5f2d00 task.stack: ffffc9000756c000
[ 451.170552] RIP: 0010:devm_iounmap+0x2d/0x40
[ 451.170553] RSP: 0018:ffffc9000756fac0 EFLAGS: 00010282
[ 451.170554] RAX: 00000000fffffffe RBX: 0000000000000000 RCX:
0000000000000000
[ 451.170555] RDX: ffffffff813a7e00 RSI: 0000000000000282 RDI:
0000000000000282
[ 451.170556] RBP: ffffc9000756fac8 R08: 00000000fffffffe R09:
00000000000009b7
[ 451.170557] R10: 0000000000000005 R11: 00000000000009b6 R12:
ffff880856c9d0a0
[ 451.170558] R13: ffffc9000f5c90c0 R14: ffff880856c9d0a0 R15:
0000000000000028
[ 451.170559] FS: 0000000000000000(0000) GS:ffff88085f400000(0000)
knlGS:0000000000000000
[ 451.170560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 451.170561] CR2: 00007f169038b000 CR3: 0000000001c09000 CR4:
00000000003406f0
[ 451.170562] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 451.170562] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 451.170563] Call Trace:
[ 451.170572] ena_release_bars.isra.48+0x34/0x60 [ena]
[ 451.170574] ena_probe+0x144/0xd90 [ena]
[ 451.170579] ? ida_simple_get+0x98/0x100
[ 451.170585] ? kernfs_next_descendant_post+0x40/0x50
[ 451.170591] local_pci_probe+0x45/0xa0
[ 451.170592] pci_device_probe+0x157/0x180
[ 451.170599] driver_probe_device+0x2a8/0x460
[ 451.170600] __device_attach_driver+0x7e/0xe0
[ 451.170602] ? driver_allows_async_probing+0x30/0x30
[ 451.170603] bus_for_each_drv+0x68/0xb0
[ 451.170605] __device_attach+0xdd/0x160
[ 451.170607] device_attach+0x10/0x20
[ 451.170610] pci_bus_add_device+0x4f/0xa0
[ 451.170611] pci_bus_add_devices+0x39/0x70
[ 451.170613] pciehp_configure_device+0x96/0x120
[ 451.170614] pciehp_enable_slot+0x1b3/0x290
[ 451.170616] pciehp_power_thread+0x3b/0xb0
[ 451.170622] process_one_work+0x149/0x360
[ 451.170623] worker_thread+0x4d/0x3c0
[ 451.170626] kthread+0x109/0x140
[ 451.170627] ? rescuer_thread+0x380/0x380
[ 451.170628] ? kthread_park+0x60/0x60
[ 451.170632] ret_from_fork+0x25/0x30
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Decrease log level of checksum errors as these messages can be
triggered remotely by bad packets.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ENA driver was developed by developers from Annapurna Labs.
Annapurna Labs was acquired by Amazon and the company's domain
(@annapurnalabs.com) will become deprecated soon.
Update the email addresses of the maintainers to the alternative amazon
emails (@amazon.com)
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Out of order flow is not working for iWARP.
This patch got cut out from initial series that added out
of order support for iWARP.
Make out of order code common for iWARP and iSCSI.
Add new configuration option CONFIG_QED_OOO. Set by
qedr and qedi Kconfigs.
Fixes: d1abfd0b4ee2 ("qed: Add iWARP out of order support")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using tc qdisc, dcb_ops->setup_tc is used to tell hclge_dcb
module to do the tm related setup. Only TC_MQPRIO_MODE_CHANNEL
offload mode is supported.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch reverts earlier commit b13ba1b83f52 ("macvlan: forbid L2
fowarding offload for macvtap"). The reason for reverting this is because
the original patch no longer fixes what it previously did as the
underlying structure has changed for macvtap. Specifically macvtap
originally pulled packets directly off of the lowerdev. However in commit
6acf54f1cf0a ("macvtap: Add support of packet capture on macvtap device.")
that code was changed and instead macvtap would listen directly on the
macvtap device itself instead of the lower device. As such, the L2
forwarding offload should now be able to provide a performance advantage of
skipping the checks on the lower dev while not introducing any sort of
regression.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If sending messages with no cable connected, it quickly happens that
there is no more TX context available. Then "gs_can_start_xmit()"
returns with "NETDEV_TX_BUSY" and the upper layer does retry
immediately keeping the CPU busy. To fix that issue, I moved
"atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to
the TX done handling in "gs_usb_receive_bulk_callback()". Renaming
"active_tx_urbs" to "active_tx_contexts" and moving it into
"gs_[alloc|free]_tx_context()" would also make sense.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
