| Age | Commit message (Collapse) | Author |
|---|
|
When the driver is built-in for PCI, we reference the exit function
after discarding it:
`pvr2fb_pci_exit' referenced in section `.ref.data' of drivers/video/fbdev/pvr2fb.o: defined in discarded section `.exit.text' of drivers/video/fbdev/pvr2fb.o
Just remove the __exit annotation as the easiest workaround.
Also apply the same workaround for pvr2fb_dc_exit().
Fixes: 0f5a5712ad1e ("video: fbdev: pvr2fb: add COMPILE_TEST support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[b.zolnierkie: remove __exit annotation also from pvr2fb_dc_exit()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Just to keep things tidy.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-6-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This is a really useful function, but it's buried in the
copy_ccw_from_iova() routine so that ccwchain_calc_length()
can just work with Format-1 CCWs while doing its counting.
But it means we're translating a full 2K of "CCWs" to Format-1,
when in reality there's probably far fewer in that space.
Let's factor it out, so maybe we can do something with it later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-5-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
It doesn't make much sense to "hide" the copy to the channel_program
struct inside a routine that calculates the length of the chain.
Let's move it to the calling routine, which will later copy from
channel_program to the memory it allocated itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-4-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
We already pinned/copied/unpinned 2K (256 CCWs) of guest memory
to the host space anchored off vfio_ccw_private. There's no need
to do that again once we have the length calculated, when we could
just copy the section we need to the "permanent" space for the I/O.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-3-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Rather than allocating/freeing a piece of memory every time
we try to figure out how long a CCW chain is, let's use a piece
of memory allocated for each device.
The io_mutex added with commit 4f76617378ee9 ("vfio-ccw: protect
the I/O region") is held for the duration of the VFIO_CCW_EVENT_IO_REQ
event that accesses/uses this space, so there should be no race
concerns with another CPU attempting an (unexpected) SSCH for the
same device.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190618202352.39702-2-farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Add COMPILE_TEST support to s3c-fb driver for better compile
testing coverage.
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Use ->screen_buffer instead of ->screen_base to fix sparse warnings.
[ Please see commit 17a7b0b4d974 ("fb.h: Provide alternate screen_base
pointer") for details. ]
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Add missing #ifndef MODULE around pvr2_get_param_val().
Fixes: 0f5a5712ad1e ("video: fbdev: pvr2fb: add COMPILE_TEST support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Flags are only read by the instructions doing the irqflags restore
operation. Pass the operand as read only to the asm inline instead of
read-write.
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@ar.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For el0_dbg and el0_error, DAIF bits get explicitly cleared before
calling ct_user_exit.
When context tracking is disabled, DAIF gets set (almost) immediately
after. When context tracking is enabled, among the first things done
is disabling IRQs.
What is actually needed is:
- PSR.D = 0 so the system can be debugged (should be already the case)
- PSR.A = 0 so async error can be handled during context tracking
Do not clear PSR.I in those two locations.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a70a ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
callback
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a70a ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When stopping packet streaming in reserve function for duplex streams,
isochronous resources should be released.
Fixes: 7bc93821a70a ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
>From callbacks for pcm and rawmidi interfaces, the functions to stop
and release duplex streams are called at the same time. This commit
merges the two functions.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This adds an example of how to inject errors into admin commands.
Suggested-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This enables to inject errors into the commands submitted to the admin
queue.
It is useful to test error handling in the controller initialization.
# echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability
# echo 1 > /sys/kernel/debug/nvme0/fault_inject/times
# echo 10 > /sys/kernel/debug/nvme0/fault_inject/space
# nvme reset /dev/nvme0
# dmesg
...
nvme nvme0: Could not set queue count (16385)
nvme nvme0: IO queues not created
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currenlty fault injection support for nvme only enables to inject errors
into the commands submitted to I/O queues.
In preparation for fault injection into the admin commands, this makes
the helper functions independent of struct nvme_ns.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch introduces target-side request tracing. As Christoph
suggested, the trace would not be in a core or module to avoid
disadvantages like cache miss:
http://lists.infradead.org/pipermail/linux-nvme/2019-June/024721.html
The target-side trace code is entirely based on the Johannes's trace code
from the host side. It has lots of codes duplicated, but it would be
better than having advantages mentioned above.
It also traces not only fabrics commands, but also nvme normal commands.
Once the codes to be shared gets bigger, then we can make it common as
suggsted.
This also removed the create_sq and create_cq trace parsing functions
because it will be done by the connect fabrics command.
Example:
echo 1 > /sys/kernel/debug/tracing/event/nvmet/nvmet_req_init/enable
echo 1 > /sys/kernel/debug/tracing/event/nvmet/nvmet_req_complete/enable
cat /sys/kernel/debug/tracing/trace
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: fixed the symbol namespace and a an endianess conversion]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
With gcc 4.1:
drivers/lightnvm/core.c: In function ‘nvm_remove_tgt’:
drivers/lightnvm/core.c:510: warning: ‘t’ is used uninitialized in this function
Indeed, if no NVM devices have been registered, t will be an
uninitialized pointer, and may be dereferenced later. A call to
nvm_remove_tgt() can be triggered from userspace by issuing the
NVM_DEV_REMOVE ioctl on the lightnvm control device.
Fix this by preinitializing t to NULL.
Fixes: 843f2edbdde085b4 ("lightnvm: do not remove instance under global lock")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_add_pc_page() may merge pages when a bio is padded due to a flush.
Fix iteration over the bio to free the correct pages in case of a merge.
Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The "result" field is in 64bit to be printed out which means it could be
like:
nvme_complete_rq: nvme0: qid=0, cmdid=0, res=18446612684158962624, etries=0, flags=0x0, status=0
Switch both the result and status field to be printed in hexadecimal
format to be easier to read.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch introduces fabrics commands tracing feature from host-side.
This patch does not include any changes for the previous host-side
tracing, but just add fabrics commands parsing in cmd=() format.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: fixed some whitespace damage]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The following patches are going to provide the target-side trace which
might need these kind of macros. It would be great if it can be shared
between host and target side both.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_trace_disk_name() is now already being invoked with the function
prototype in trace.h. We don't need to export this symbol at all.
The following patches are going to provide target-side trace feature
with the exactly same function with this so that this patch removes the
EXPORT_SYMBOL() for this function.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove the status parameter o nvme_remove_dead_ctrl(), which is only
used for printing it.
We move the print message to the same function where actual error is
occurring.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:
[ 293.689160] nvme nvme0: failed to mark controller CONNECTING
[ 293.689160] nvme nvme0: Removing after probe failure status: 0
Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.
This patch makes it indicate the proper error value when it fails.
[ 25.932367] nvme nvme0: failed to mark controller CONNECTING
[ 25.932369] nvme nvme0: Removing after probe failure status: -16
This situation is able to be easily reproduced by:
root@target:~# rmmod nvme && modprobe nvme && rmmod nvme
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.
Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If the "irq_queues" are greater than num_possible_cpus(),
nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater
than it can be afforded.
2039 affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;
It might cause a WARN() from the irq_build_affinity_masks() like [1]:
220 if (nr_present < numvecs)
221 WARN_ON(nr_present + nr_others < numvecs);
This patch prevents it from the WARN() by adjusting the max_vector value
from the nvme_setup_irqs().
[1] WARN messages when modprobe nvme write_queues=32 poll_queues=0:
root@target:~/nvme# nproc
8
root@target:~/nvme# modprobe nvme write_queues=32 poll_queues=0
[ 17.925326] nvme nvme0: pci function 0000:00:04.0
[ 17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330
[ 17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme]
[ 17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G W 5.1.0+ #156
[ 17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[ 17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330
[ 17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01
[ 17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216
[ 17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000
[ 17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000
[ 17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70
[ 17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020
[ 17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800
[ 17.940614] FS: 0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000
[ 17.940616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0
[ 17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 17.940618] Call Trace:
[ 17.940622] __pci_enable_msix_range+0x215/0x540
[ 17.940623] ? kernfs_put+0x117/0x160
[ 17.940625] pci_alloc_irq_vectors_affinity+0x74/0x110
[ 17.940626] nvme_reset_work+0xc30/0x1397 [nvme]
[ 17.940628] ? __switch_to_asm+0x34/0x70
[ 17.940628] ? __switch_to_asm+0x40/0x70
[ 17.940629] ? __switch_to_asm+0x34/0x70
[ 17.940630] ? __switch_to_asm+0x40/0x70
[ 17.940630] ? __switch_to_asm+0x34/0x70
[ 17.940631] ? __switch_to_asm+0x40/0x70
[ 17.940632] ? nvme_irq_check+0x30/0x30 [nvme]
[ 17.940633] process_one_work+0x20b/0x3e0
[ 17.940634] worker_thread+0x1f9/0x3d0
[ 17.940635] ? cancel_delayed_work+0xa0/0xa0
[ 17.940636] kthread+0x117/0x120
[ 17.940637] ? kthread_stop+0xf0/0xf0
[ 17.940638] ret_from_fork+0x3a/0x50
[ 17.940639] ---[ end trace aca8a131361cd42a ]---
[ 17.942124] nvme nvme0: 7/1/0 default/read/poll queues
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
queue_count_set() seems like that it has been provided to limit the
number of queue entries for write/poll queues. But, the
queue_count_set() has been doing nothing but a parameter check even it
has num_possible_cpus() which is nop.
This patch removes entire queue_count_ops from the write_queues and
poll_queues.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
poll_queues will be zero even without zero initialization here.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nvme pci driver prepares its devices for power loss during suspend
by shutting down the controllers. The power setting is deferred to
pci driver's power management before the platform removes power. The
suspend-to-idle mode, however, does not remove power.
NVMe devices that implement host managed power settings can achieve
lower power and better transition latencies than using generic PCI power
settings. Try to use this feature if the platform is not involved with
the suspend. If successful, restore the previous power state on resume.
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: fixed the compilation for the !CONFIG_PM_SLEEP case]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch introduces a nvme_is_fabrics() inline function to check
whether or not the given command structure is for fabrics.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Future use intends to make use of both, so export these functions. And
since their implementation is identical except for the opcode, provide a
new function that implement both.
[akinobu.mita@gmail.com>: fix line over 80 characters]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.
Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When looking at console messages to troubleshoot, there are one
maybe two messages before creation of the controller is complete.
However, a lot of io takes place to reach that point. It's unclear
when things have started.
Add a message when the controller is attempting to create a new
association. Thus we know what controller, between what host and
remote port, and what NQN is being put into place for any
subsequent success or failure messages.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
To support scenarios which aren't bound to nvmetcli add port scenarios,
which is currently where the nvmet_fc transport invokes the discovery
event callbacks, a syfs attribute is added to lpfc which can be written
to cause an RSCN to be generated for the nport.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch updates RSCN receive processing to check for the remote
port being an NVME port, and if so, invoke the nvme_fc callback to
rescan the remote port. The rescan will generate a discovery udev
event.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds support for the nvmet discovery op. When the callback
routine is called, the driver will call the routine to generate an RSCN
to the port on the other end of the link.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds general RSCN support:
- The ability to transmit an RSCN to the port on the other end of
the link (regular port if pt2pt, or fabric controller if fabric).
- And general recognition of an RSCN ELS when an ELS is received.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Update fcloop to support the discovery_event operation and
invoke a nvme rescan. In a real fc adapter, this would generate an
RSCN, which the host would receive and convert into a nvme rescan
on the remote port specified in the rscn payload.
Signed-off-by: James Smart <jsmart2021@gmail.com>
[kbuild-bot: fcloop_tgt_discovery_evt can be static]
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds support for the nvmet discovery_change transport op.
In turn, the transport adds it's own LLDD api callback discovery_event
op to request the LLDD to generate an RSCN for the discovery change.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some transports, such as FC-NVME, support discovery controller change
events without the use of a persistent discovery controller. FC receives
events via RSCN from the FC Fabric Controller or subsystem FC port.
This patch adds a nvmet transport op that is called whenever a
discovery change event occurs in the nvmet layer.
To facilitate the callback without adding another layer to cross into
core.c to reference the transport ops, the port structure snapshots
the transport ops when the port is enabled and clears them when disabled.
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The bfq schedule now uses css_next_descendant_pre directly after
the stats functionality depending on it has been from the core
blk-cgroup code to bfq. Export the symbol so that bfq can still
be build modular.
Fixes: d6258980daf2 ("bfq-iosched: move bfq_stat_recursive_sum into the only caller")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that ARM errata 814220 is selected by STM32MP157 SoC
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
execute out of order
The v7 ARM states that all cache and branch predictor maintenance operations
that do not specify an address execute, relative to each other, in program
order. However, because of this erratum, an L2 set/way cache maintenance
operation can overtake an L1 set/way cache maintenance operation, this would
cause the data corruption.
This ERRATA affected the Cortex-A7 and present in r0p2, r0p3, r0p4, r0p5.
This patch is the SW workaround by adding a DSB before changing cache levels as
the ARM ERRATA: ARM/MP: 814220 told in the ARM ERRATA documentation.
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
