summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-09pinctrl: baytrail: Update North Community pin listAndy Shevchenko
Update North Community pin list to be more clear about pin functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-12-09pinctrl: baytrail: Really serialize all register accessesHans de Goede
Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") added a spinlock around all register accesses because: "There is a hardware issue in Intel Baytrail where concurrent GPIO register access might result reads of 0xffffffff and writes might get dropped completely." Testing has shown that this does not catch all cases, there are still 2 problems remaining 1) The original fix uses a spinlock per byt_gpio device / struct, additional testing has shown that this is not sufficient concurent accesses to 2 different GPIO banks also suffer from the same problem. This commit fixes this by moving to a single global lock. 2) The original fix did not add a lock around the register accesses in the suspend/resume handling. Since pinctrl-baytrail.c is using normal suspend/resume handlers, interrupts are still enabled during suspend/resume handling. Nothing should be using the GPIOs when they are being taken down, _but_ the GPIOs themselves may still cause interrupts, which are likely to use (read) the triggering GPIO. So we need to protect against concurrent GPIO register accesses in the suspend/resume handlers too. This commit fixes this by adding the missing spin_lock / unlock calls. The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely confused after a suspend resume. The DSDT for this device has a bug in its _LID method which reprograms the home and power button trigger- flags requesting both high and low _level_ interrupts so the IRQs for these 2 GPIOs continuously fire. This combined with the saving of registers during suspend, triggers concurrent GPIO register accesses resulting in saving 0xffffffff as pconf0 value during suspend and then when restoring this on resume the pinmux settings get all messed up, resulting in various I2C busses being stuck, the wifi no longer working and often the tablet simply not coming out of suspend at all. Cc: stable@vger.kernel.org Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-09gpio: xtensa: fix driver buildMax Filippov
Commit cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr") removed {RSR,WSR}_CPENABLE from xtensa code, but did not fix up all users, breaking gpio-xtensa driver build. Update gpio-xtensa to use new xtensa_{get,set}_sr API. Cc: stable@vger.kernel.org # v5.0+ Fixes: cad6fade6e78 ("xtensa: clean up WSR*/RSR*/get_sr/set_sr") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-12-09cpuidle: use first valid target residency as poll timeMarcelo Tosatti
Commit 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure") changed, by mistake, the target residency from the first available sleep state to the last available sleep state (which should be longer). This might cause excessive polling. Fixes: 259231a04561 ("cpuidle: add poll_limit_ns to cpuidle_device structure") Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-09Merge tag 'devfreq-fixes-for-5.5-rc2' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for 5.5-rc1 from Chanwoo Choi: "Update devfreq core: - Add PM QoS support for devfreq device with following QoS type. External user of devfreq device can request the minimum and maximum frequency according to their multiple requirements. : DEV_PM_QOS_MIN_FREQUENCY is used for requesting the minimum device frequency. : DEV_PM_QOS_MAX_FREQUENCY is used for requesting the maximum device frequency. - Use PM QoS interface when entering the min/max_freq via sysfs interface. - Add get_freq_range() helper function in order to get the final min/max frequency among the multiple requirements of min/max frequency. - Fix a function return value and modify code for more correct exception handling if errors happen." * tag 'devfreq-fixes-for-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: Use PM QoS for sysfs min/max_freq PM / devfreq: Add PM QoS support PM / devfreq: Don't fail devfreq_dev_release if not in list PM / devfreq: Introduce get_freq_range helper PM / devfreq: Set scaling_max_freq to max on OPP notifier error PM / devfreq: Fix devfreq_notifier_call returning errno
2019-12-09Merge tag 'iio-fixes-for-5.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of fixes for IIO in the 5.5 cycle. Mixture of old things people have just hit, and a few late breaking issues with things that went in during the merge window. Being sent promptly to resolve potential DT breakage causing issues for binding test builds. * ad7606 - Avoid reading extra data from the device over what was intended. * ad7124 - Enable the internal reference when in use. * ad7292 - Fix up license for newly added binding. Better to not have this go out in a release with more limited header than intended. - Fix a constraint on number of channels. * ad7949 - Fix an issue which can result in readouts being from the wrong channel. * hdc100x - Fix wrong ABI usage (units) for relative humidity channel. * intel mrfld - Allocate right amount of private data (currently allocating too much). * ltc2983 - Avoid a potential issue with machine endianness and wrong length device tree read. * max1027 - Clean up leak of an iio_trigger on probe failure. * max9611 - Ensure we sleep long enough to successfully initialize the sensor. * mpu6050 - Fix wrong ABI usage (units) for temperature channel. * st_accel - Fix an unused variable warning. * st_lsm6dsx - Fix decimation factor issue that can lead to missaligned datasets (and hence garbage) - Fix an issue with how we track enabled fifo channels. - Avoid powering off the device if wake up events are enabled. * tag 'iio-fixes-for-5.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: max9611: Fix too short conversion time delay iio: ad7949: fix channels mixups iio: imu: st_lsm6dsx: do not power-off accel if events are enabled iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask iio: imu: st_lsm6dsx: fix decimation factor estimation iio: imu: inv_mpu6050: fix temperature reporting using bad unit iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting iio: adc: max1027: fix not unregistered iio trigger iio: adc: intel_mrfld_adc: Allocating too much data in probe() iio: adc: ad7124: Enable internal reference dt-bindings: iio: adc: ad7292: fix constraint over channel quantity dt-bindings: iio: adc: ad7292: Update SPDX identifier iio: temperature: ltc2983: fix u32 read into a unsigned long long iio: st_accel: Fix unused variable warning iio: adc: ad7606: fix reading unnecessary data from device
2019-12-09drm: meson: venc: cvbs: fix CVBS mode matchingMartin Blumenstingl
With commit 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer") the drm core started honoring the picture_aspect_ratio field when comparing two drm_display_modes. Prior to that it was ignored. When the CVBS encoder driver was initially submitted there was no aspect ratio check. Switch from drm_mode_equal() to drm_mode_match() without DRM_MODE_MATCH_ASPECT_RATIO to fix "kmscube" and X.org output using the CVBS connector. When (for example) kmscube sets the output mode when using the CVBS connector it passes HDMI_PICTURE_ASPECT_NONE, making the drm_mode_equal() fail as it include the aspect ratio. Prior to this patch kmscube reported: failed to set mode: Invalid argument The CVBS mode checking in the sun4i (drivers/gpu/drm/sun4i/sun4i_tv.c sun4i_tv_mode_to_drm_mode) and ZTE (drivers/gpu/drm/zte/zx_tvenc.c tvenc_mode_{pal,ntsc}) drivers don't set the "picture_aspect_ratio" at all. The Meson VPU driver does not rely on the aspect ratio for the CVBS output so we can safely decouple it from the hdmi_picture_aspect setting. Cc: <stable@vger.kernel.org> Fixes: 222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer") Fixes: bbbe775ec5b5da ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: squashed with drm: meson: venc: cvbs: deduplicate the meson_cvbs_mode lookup code] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191208171832.1064772-3-martin.blumenstingl@googlemail.com
2019-12-09Merge tag 'drm-misc-fixes-2019-11-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - A fix for a memory leak in the dma-buf support - One in mcde DSI support that leads to a pointer dereference Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191125094336.GA14723@gilmour.lan
2019-12-09ALSA: firewire-motu: fix double unlocked 'motu->mutex'Takashi Sakamoto
Mutex is doubly unlocked in some error path of pcm.open. This commit fixes ALSA firewire-motu driver in Linux kernel v5.5. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 3fd80b200388 ("ALSA: firewire-motu: use the same size of period for PCM substream in AMDTP streams") Fixes: 0f5482e7875b ("ALSA: firewire-motu: share PCM buffer size for both direction") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20191208232226.6685-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-12-08riscv: only select serial sifive if TTY is enabledKefeng Wang
There is some warning if TTY is not enabled, and lead to build error, only select serial sifive if TTY enabled, and this also makes randconfig happy. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> [paul.walmsley@sifive.com: updated to apply] Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-08riscv: Fix build dependency for loaderOlof Johansson
The Makefile addition for the flat image loader missed an obj prefix. For most parallel builds this worked out fine, but with -j1 the dependency wasn't fulfilled and thus fails: arch/riscv/boot/loader.S: Assembler messages: arch/riscv/boot/loader.S:7: Error: file not found: arch/riscv/boot/Image Fixes: 405fe7aa0dba ("riscv: provide a flat image loader") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-12-09PM / devfreq: Use PM QoS for sysfs min/max_freqLeonard Crestez
Switch the handling of min_freq and max_freq from sysfs to use the dev_pm_qos_request interface. Since PM QoS handles frequencies as kHz this change reduces the precision of min_freq and max_freq. This shouldn't introduce problems because frequencies which are not an integer number of kHz are likely not an integer number of Hz either. Try to ensure compatibility by rounding min values down and rounding max values up. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Return -EAGAIN instead of -EINVAL if dev_pm_qos is inactive] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Add PM QoS supportLeonard Crestez
Register notifiers with the PM QoS framework in order to respond to requests for DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY. No notifiers are added by this patch but PM QoS constraints can be imposed externally (for example from other devices). Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Don't fail devfreq_dev_release if not in listLeonard Crestez
Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Introduce get_freq_range helperLeonard Crestez
Moving handling of min/max freq to a single function and call it from update_devfreq and for printing min/max freq values in sysfs. This changes the behavior of out-of-range min_freq/max_freq: clamping is now done at evaluation time. This means that if an out-of-range constraint is imposed by sysfs and it later becomes valid then it will be enforced. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Set scaling_max_freq to max on OPP notifier errorLeonard Crestez
The devfreq_notifier_call functions will update scaling_min_freq and scaling_max_freq when the OPP table is updated. If fetching the maximum frequency fails then scaling_max_freq remains set to zero which is confusing. Set to ULONG_MAX instead so we don't need special handling for this case in other places. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Fix devfreq_notifier_call returning errnoLeonard Crestez
Notifier callbacks shouldn't return negative errno but one of the NOTIFY_OK/DONE/BAD values. The OPP core will ignore return values from notifiers but returning a value that matches NOTIFY_STOP_MASK will stop the notification chain. Fix by always returning NOTIFY_OK. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_tablePeng Fan
There should be a sentinel of ulp_div_table, otherwise _get_table_div may access data out of the array. Fixes: b1260067ac3d ("clk: imx: add imx7ulp clk driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09kbuild: fix 'No such file or directory' warning when cleaningMasahiro Yamada
Since commit fcbb8461fd23 ("kbuild: remove header compile test"), 'make clean' with O= option in the pristine source tree emits 'No such file or directory' warning. $ git clean -d -f -x $ make O=foo clean make[1]: Entering directory '/home/masahiro/linux/foo' find: ‘usr/include’: No such file or directory make[1]: Leaving directory '/home/masahiro/linux/foo' Fixes: fcbb8461fd23 ("kbuild: remove header compile test") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-09ARM: dts: e60k02: fix power buttonAndreas Kemnade
The power button was only producing irqs, but no key events, Forced power down with long key press works, so probably only a short spike arrives at the SoC. Further investigation shows that LDORTC2 is off after boot of the vendor kernel. LDORTC2 is shared with a GPIO at the pmic which probably transfers the button press to the SoC. That regulator off at boot, so "regulator-boot-on" is definitively wrong. So remove that. Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09clk: imx: clk-composite-8m: add lock to gate/muxPeng Fan
There is a lock to divider in the composite driver, but that's not enough. lock to gate/mux are also needed to provide exclusive access to the register. Fixes: d3ff9728134e ("clk: imx: Add imx composite clock") Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-09ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probingStefan Roese
Without this "jedec,spi-nor" compatible property, probing of the SPI NOR does not work on the NXP i.MX6ULL EVK. Fix this by adding this compatible property to the DT. Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration") Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-08Linux 5.5-rc1Linus Torvalds
2019-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Eleven patches, all in drivers (no core changes) that are either minor cleanups or small fixes. They were late arriving, but still safe for -rc1" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry scsi: megaraid_sas: Make poll_aen_lock static scsi: sd_zbc: Improve report zones error printout scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI scsi: qla2xxx: unregister ports after GPN_FT failure scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan scsi: pm80xx: Remove unused include of linux/version.h scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3 scsi: scsi_transport_sas: Fix memory leak when removing devices scsi: lpfc: size cpu map by last cpu id set scsi: ibmvscsi_tgt: Remove unneeded variable rc
2019-12-08Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Nine cifs/smb3 fixes: - one fix for stable (oops during oplock break) - two timestamp fixes including important one for updating mtime at close to avoid stale metadata caching issue on dirty files (also improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the wire) - two fixes for "modefromsid" mount option for file create (now allows mode bits to be set more atomically and accurately on create by adding "sd_context" on create when modefromsid specified on mount) - two fixes for multichannel found in testing this week against different servers - two small cleanup patches" * tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve check for when we send the security descriptor context on create smb3: fix mode passed in on create for modetosid mount option cifs: fix possible uninitialized access and race on iface_list cifs: Fix lookup of SMB connections on multichannel smb3: query attributes on file close smb3: remove unused flag passed into close functions cifs: remove redundant assignment to pointer pneg_ctxt fs: cifs: Fix atime update check vs mtime CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
2019-12-08Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs cleanups from Al Viro: "No common topic, just three cleanups". * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make __d_alloc() static fs/namespace: add __user to open_tree and move_mount syscalls fs/fnctl: fix missing __user in fcntl_rw_hint()
2019-12-08iio: adc: max9611: Fix too short conversion time delayGeert Uytterhoeven
As of commit b9ddd5091160793e ("iio: adc: max9611: Fix temperature reading in probe"), max9611 initialization sometimes fails on the Salvator-X(S) development board with: max9611 4-007f: Invalid value received from ADC 0x8000: aborting max9611: probe of 4-007f failed with error -5 The max9611 driver tests communications with the chip by reading the die temperature during the probe function, which returns an invalid value. According to the datasheet, the typical ADC conversion time is 2 ms, but no minimum or maximum values are provided. Maxim Technical Support confirmed this was tested with temperature Ta=25 degreeC, and promised to inform me if a maximum/minimum value is available (they didn't get back to me, so I assume it is not). However, the driver assumes a 1 ms conversion time. Usually the usleep_range() call returns after more than 1.8 ms, hence it succeeds. When it returns earlier, the data register may be read too early, and the previous measurement value will be returned. After boot, this is the temperature POR (power-on reset) value, causing the failure above. Fix this by increasing the delay from 1000-2000 µs to 3000-3300 µs. Note that this issue has always been present, but it was exposed by the aformentioned commit. Fixes: 69780a3bbc0b1e7e ("iio: adc: Add Maxim max9611 ADC driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: ad7949: fix channels mixupsAndrea Merello
Each time we need to read a sample (from the sysfs interface, since the driver supports only it) the driver writes the configuration register with the proper settings needed to perform the said read, then it runs another xfer to actually read the resulting value. Most notably the configuration register is updated to set the ADC internal MUX depending by which channel the read targets. Unfortunately this seems not enough to ensure correct operation because the ADC works in a pipelined-like fashion and the new configuration isn't applied in time. The ADC alternates two phases: acquisition and conversion. During the acquisition phase the ADC samples the analog signal in an internal capacitor; in the conversion phase the ADC performs the actual analog to digital conversion of the stored voltage. Note that of course the MUX needs to be set to the proper channel when the acquisition phase is performed. Once the conversion phase has been completed, the device automatically switches back to a new acquisition; on the other hand the device switches from acquisition to conversion on the rising edge of SPI cs signal (that is when the xfer finishes). Only after both two phases have been completed (with the proper settings already written in the configuration register since the beginning) it is possible to read the outcome from SPI bus. With the current driver implementation, we end up in the following situation: _______ 1st xfer ____________ 2nd xfer ___________________ SPI cs.. \_________/ \_________/ SPI rd.. idle |(val N-2)+ idle | val N-1 + idle ... SPI wr.. idle | cfg N + idle | (X) + idle ... ------------------------ + -------------------- + ------------------ AD .. acq N-1 + cnv N-1 | acq N + cnv N | acq N+1 As shown in the diagram above, the value we read in the Nth read belongs to configuration setting N-1. In case the configuration is not changed (config[N] == config[N-1]), then we still get correct data, but in case the configuration changes (i.e. switching the MUX on another channel), we get wrong data (data from the previously selected channel). This patch fixes this by performing one more "dummy" transfer in order to ending up in reading the data when it's really ready, as per the following timing diagram. _______ 1st xfer ____________ 2nd xfer ___________ 3rd xfer ___ SPI cs.. \_________/ \_________/ \_________/ SPI rd.. idle |(val N-2)+ idle |(val N-1)+ idle | val N + .. SPI wr.. idle | cfg N + idle | (X) + idle | (X) + .. ------------------------ + -------------------- + ------------------- + -- AD .. acq N-1 + cnv N-1 | acq N + cnv N | acq N+1 | .. NOTE: in the latter case (cfg changes), the acquisition phase for the value to be read begins after the 1st xfer, that is after the read request has been issued on sysfs. On the other hand, if the cfg doesn't change, then we can refer to the fist diagram assuming N == (N - 1); the acquisition phase _begins_ before the 1st xfer (potentially a lot of time before the read has been issued via sysfs, but it _ends_ after the 1st xfer, that is _after_ the read has started. This should guarantee a reasonably fresh data, which value represents the voltage that the sampled signal has after the read start or maybe just around it. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: imu: st_lsm6dsx: do not power-off accel if events are enabledLorenzo Bianconi
Do not power-off accel unconditionally if wake-up events are enabled powering off the hw FIFO. At the same time do not power-off the accel sensor if it is 'batched' in the hw FIFO disabling sensor events Fixes: b5969abfa8b8 ("iio: imu: st_lsm6dsx: add motion events") Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_maskLorenzo Bianconi
Track hw FIFO state introducing fifo_mask since now the accel sensor can be enabled during suspend/resume in order to trigger the wake-up enabling the FIFO in st_lsm6dsx_resume even if it was disabled before the suspend. Hence we must separately track the fifo state. Fixes: 4c997dfa692d ("iio: imu: st_lsm6dsx: add wakeup-source option") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: imu: st_lsm6dsx: fix decimation factor estimationLorenzo Bianconi
Fix decimation factor and sip estimation for LSM6DSM series (max value for decimation factor is 32). If gyro and accel sensors are enabled at 12.5Hz and 416Hz respectively, decimation factor lookup will fail, producing unaligned data. Remove unused decimator filed in st_lsm6dsx_sensor structure. Fixes: f8710f0357bc ("iio: imu: st_lsm6dsx: express odr in mHZ") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: imu: inv_mpu6050: fix temperature reporting using bad unitJean-Baptiste Maneyrol
Temperature should be reported in milli-degrees, not degrees. Fix scale and offset values to use the correct unit. This is a fix for an issue that has been present for a long time. The fixes tag reflects the point at which the code last changed in a fashion that would make this fix patch no longer apply. Backports will be necessary to fix those elements that predate that patch. Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reportingChris Lesiak
The IIO_HUMIDITYRELATIVE channel was being incorrectly reported back as percent when it should have been milli percent. This is via an incorrect scale value being returned to userspace. Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: adc: max1027: fix not unregistered iio triggerChuhong Yuan
The driver forgets to unregister the iio trigger in probe failure and remove. Use devm API to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: adc: intel_mrfld_adc: Allocating too much data in probe()Dan Carpenter
This probe function is passing the wrong size to devm_iio_device_alloc(). It is supposed to be the size of the private data. Fortunately, sizeof(*indio_dev) is larger than sizeof(struct mrfld_adc) so it doesn't cause a runtime problem. Fixes: a7118662734a ("iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: adc: ad7124: Enable internal referenceMircea Caprioru
When the internal reference was selected by a channel it was not enabled. This patch fixes that and enables it. Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support") Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08dt-bindings: iio: adc: ad7292: fix constraint over channel quantityMarcelo Schmitt
Change items property of AD7292 channels to correctly constrain their quantity. Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08dt-bindings: iio: adc: ad7292: Update SPDX identifierMarcelo Schmitt
Update SPDX identifier to the preferred dual GPL-2.0 OR BSD-2-Clause licensing. Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: temperature: ltc2983: fix u32 read into a unsigned long longColin Ian King
Currently the read of temp using of_property_read_u32_index is reading a u32 value into a unsigned long long. This relies on machine endianness to work correctly, so fix this by reading a u32 value and setting temp to this value. Addresses-Coverity: ("Reliance on integer endianness") Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: st_accel: Fix unused variable warningYueHaibing
drivers/iio/accel/st_accel_core.c:1005:44: warning: mount_matrix_ext_info defined but not used [-Wunused-const-variable=] Using stub helper while CONFIG_ACPI is disabled to fix it. Suggested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08iio: adc: ad7606: fix reading unnecessary data from deviceBeniamin Bia
When a conversion result is being read from ADC, the driver reads the number of channels + 1 because it thinks that IIO_CHAN_SOFT_TIMESTAMP is also a physical channel. This patch fixes this issue. Fixes: 2985a5d88455 ("staging: iio: adc: ad7606: Move out of staging") Reported-by: Robert Wörle <rwoerle@mibtec.de> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-08erofs: update documentationGao Xiang
Some on-disk structures, fields have been renamed in v5.4, the corresponding document should be updated as well. Also fix misrespresentation of file time and words about fixed-sized output compression, data inline, etc. Link: https://lore.kernel.org/r/20191207025509.6614-1-hsiangkao@aol.com/ Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
2019-12-08efi/earlycon: Remap entire framebuffer after page initializationAndy Shevchenko
When commit: 69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation") moved the x86 specific EFI earlyprintk implementation to a shared location, it also tweaked the behaviour. In particular, it dropped a trick with full framebuffer remapping after page initialization, leading to two regressions: 1) very slow scrolling after page initialization, 2) kernel hang when the 'keep_bootcon' command line argument is passed. Putting the tweak back fixes #2 and mitigates #1, i.e., it limits the slow behavior to the early boot stages, presumably due to eliminating heavy map()/unmap() operations per each pixel line on the screen. [ ardb: ensure efifb is unmapped again unless keep_bootcon is in effect. ] [ mingo: speling fixes. ] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: linux-efi@vger.kernel.org Fixes: 69c1f396f25b ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation") Link: https://lkml.kernel.org/r/20191206165542.31469-7-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08efi: Fix efi_loaded_image_t::unload typeArvind Sankar
The ::unload field is a function pointer, so it should be u32 for 32-bit, u64 for 64-bit. Add a prototype for it in the native efi_loaded_image_t type. Also change type of parent_handle and device_handle from void * to efi_handle_t for documentation purposes. The unload method is not used, so no functional change. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-6-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08efi/gop: Fix memory leak in __gop_query32/64()Arvind Sankar
efi_graphics_output_protocol::query_mode() returns info in callee-allocated memory which must be freed by the caller, which we aren't doing. We don't actually need to call query_mode() in order to obtain the info for the current graphics mode, which is already there in gop->mode->info, so just access it directly in the setup_gop32/64() functions. Also nothing uses the size of the info structure, so don't update the passed-in size (which is the size of the gop_handle table in bytes) unnecessarily. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08efi/gop: Return EFI_SUCCESS if a usable GOP was foundArvind Sankar
If we've found a usable instance of the Graphics Output Protocol (GOP) with a framebuffer, it is possible that one of the later EFI calls fails while checking if any support console output. In this case status may be an EFI error code even though we found a usable GOP. Fix this by explicitly return EFI_SUCCESS if a usable GOP has been located. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-4-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08efi/gop: Return EFI_NOT_FOUND if there are no usable GOPsArvind Sankar
If we don't find a usable instance of the Graphics Output Protocol (GOP) because none of them have a framebuffer (i.e. they were all PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return EFI_SUCCESS even though we didn't find a usable GOP. Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are found, allowing the caller to probe for UGA instead. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-3-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08efi/memreserve: Register reservations as 'reserved' in /proc/iomemArd Biesheuvel
Memory regions that are reserved using efi_mem_reserve_persistent() are recorded in a special EFI config table which survives kexec, allowing the incoming kernel to honour them as well. However, such reservations are not visible in /proc/iomem, and so the kexec tools that load the incoming kernel and its initrd into memory may overwrite these reserved regions before the incoming kernel has a chance to reserve them from further use. Address this problem by adding these reservations to /proc/iomem as they are created. Note that reservations that are inherited from a previous kernel are memblock_reserve()'d early on, so they are already visible in /proc/iomem. Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Tested-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Cc: <stable@vger.kernel.org> # v5.4+ Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-2-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devicesXiaolong Huang
Uninitialized Kernel memory can leak to USB devices. Fix this by using kzalloc() instead of kmalloc(). Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Fixes: 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Cc: linux-stable <stable@vger.kernel.org> # >= v4.19 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-14 07:37:57 +0000