| Age | Commit message (Collapse) | Author |
|---|
|
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple
FS support, but the ksft is currently 3-tuple only. Support drivers that
have 5-tuple FS supported by adding a ksft arg.
Signed-off-by: Mina Almasry <almasrymina@google.com>
fix 5-tuple
fix 5-tuple
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This exit_wait seems necessary to make the rx side test pass for me.
I think this is just missed from the original test add patch. Add it now.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports both ipv4 and ipv6, but the ksft is currently
ipv6-only. Propagate the ipv4 support to the ksft, so that folks that
are limited to these networks can also test.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Preserve the error code returned by sock_cmsg_send and return that on
err.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Minor cleanup; this line is badly formatted.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's annoying for the list_add to be outside net_devmem_bind_dmabuf, but
the list_del is in net_devmem_unbind_dmabuf. Make it consistent by
having both the list_add/del be inside the net_devmem_[un]bind_dmabuf.
Cc: ap420073@gmail.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
message
Paolo Abeni says:
Recently the nipa CI infra went through some tuning, and the mentioned
self-test now often fails.
The failing test is the sctp+nfqueue one, where the file transfer takes
too long and hits the timeout (1 minute).
Because SCTP nfqueue tests had timeout related issues before (esp. on debug
kernels) print the file transfer duration in the PASS/FAIL message.
This would aallow us to see if there is/was an unexpected slowdown
(CI keeps logs around) or 'creeping slowdown' where things got slower
over time until 'fail point' was reached.
Output of altered lines looks like this:
PASS: tcp and nfqueue in forward chan (duration: 2s)
PASS: tcp via loopback (duration: 2s)
PASS: sctp and nfqueue in forward chain (duration: 42s)
PASS: sctp and nfqueue in output chain with GSO (duration: 21s)
Reported-by: Paolo Abeni <pabeni@redhat.com
Closes: https://lore.kernel.org/netdev/584524ef-9fd7-4326-9f1b-693ca62c5692@redhat.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250523121700.20011-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prevent calling phy_exit() before phy_init() to avoid abnormal power
count and the following warning during boot up.
[5.146763] phy phy-1d80000.phy.0: phy_power_on was called before phy_init
Fixes: 7bac65687510 ("scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()")
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250526153821.7918-2-quic_nitirawa@quicinc.com
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix memory leak when running one-step timestamping. When running
one-step sync timestamping, the HW is configured to insert the TX time
into the frame, so there is no reason to keep the skb anymore. As in
this case the HW will never generate an interrupt to say that the frame
was timestamped, then the frame will never released.
Fix this by freeing the frame in case of one-step timestamping.
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250522115722.2827199-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ufs_qcom_cfg_timers() is clock freq dependent like
ufs_qcom_set_core_clk_ctrl(), hence move ufs_qcom_cfg_timers() call to
clock scaling path. In addition, do not assume the devfreq OPP freq is
always the 'core_clock' freq although 'core_clock' is the first clock
phandle in device tree, use ufs_qcom_opp_freq_to_clk_freq() to find the
core clk freq.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250522021537.999107-4-quic_ziqichen@quicinc.com
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Closes: https://lore.kernel.org/linux-arm-msm/D9FZ9U3AEXW4.1I12FX3YQ3JPW@fairphone.com/
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Loïc Minier <loic.minier@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On some platforms, the devfreq OPP freq may be different than the unipro
core clock freq. Implement ufs_qcom_opp_freq_to_clk_freq() and use it to
find the unipro core clk freq.
Fixes: c02fe9e222d1 ("scsi: ufs: qcom: Implement the freq_to_gear_speed() vop")
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250522021537.999107-3-quic_ziqichen@quicinc.com
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Closes: https://lore.kernel.org/linux-arm-msm/D9FZ9U3AEXW4.1I12FX3YQ3JPW@fairphone.com/
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Loïc Minier <loic.minier@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The vop freq_to_gear() may return a gear greater than the negotiated max
gear. Return the negotiated max gear if the mapped gear is greater.
Fixes: c02fe9e222d1 ("scsi: ufs: qcom: Implement the freq_to_gear_speed() vop")
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250522021537.999107-2-quic_ziqichen@quicinc.com
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/all/c7f2476a-943a-4d73-ad80-802c91e5f880@linaro.org/
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Tested-by: Loïc Minier <loic.minier@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There isn't a AAC_MIN_NATIVE_SIZE defined so remove eight useless lines.
When at it remove also an unused #define
No functional change.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20250521165148.8856-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct a minor typo in a comment within scsi_devinfo.c, replacing
"compatibile" with the correct spelling "compatible".
Signed-off-by: mrigendrachaubey <mrigendra.chaubey@gmail.com>
Link: https://lore.kernel.org/r/20250524035516.27341-1-mrigendra.chaubey@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When preparing for UFS clock scaling, the UFS driver will quiesce all
sdevs queues in the UFS SCSI host tagset list and then unquiesce them in
ufshcd_clock_scaling_unprepare(). If the UFS SCSI host async scan is in
progress at this time, some LUs may be added to the tagset list between
UFS clkscale prepare and unprepare. This can cause two issues:
1. During clock scaling, there may be I/O requests issued through new
added queues that have not been quiesced, leading to task abort issue.
2. These new added queues that have not been quiesced will be unquiesced
as well when UFS clkscale is unprepared, resulting in warning prints.
Therefore, use the mutex lock scan_mutex in
ufshcd_clock_scaling_prepare() and ufshcd_clock_scaling_unprepare() to
protect it.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250522081233.2358565-1-quic_ziqichen@quicinc.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sctp_do_peeloff is only used inside of net/sctp/socket.c,
so mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250526054745.2329201-1-hch@lst.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb
and 64 Kb respectively. Adjust max size definitions and return correct
EEPROM length based on device. Also prevent out-of-bound read/write.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250523173326.18509-1-rengarajan.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When SR-IOV is enabled, the FDIR rule is supported to filter packets to
VFs. The action queue id is calculated as an absolute id.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/BE7EA355FDDAAA97+20250523080438.27968-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When SR-IOV is enabled, the number of multicast packets is mistakenly
counted starting from queue 0. It would be a wrong count that includes
the packets received on VF. Fix it to count from the correct offset.
Fixes: c52d4b898901 ("net: libwx: Redesign flow when sriov is enabled")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/F70910CFE86C1F6F+20250523080438.27968-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Users of IPE require a way to identify when and why an operation fails,
allowing them to both respond to violations of policy and be notified
of potentially malicious actions on their systems with respect to IPE.
This patch introduces a new error field to the AUDIT_IPE_POLICY_LOAD event
to log policy loading failures. Currently, IPE only logs successful policy
loads, but not failures. Tracking failures is crucial to detect malicious
attempts and ensure a complete audit trail for security events.
The new error field will capture the following error codes:
* -ENOKEY: Key used to sign the IPE policy not found in the keyring
* -ESTALE: Attempting to update an IPE policy with an older version
* -EKEYREJECTED: IPE signature verification failed
* -ENOENT: Policy was deleted while updating
* -EEXIST: Same name policy already deployed
* -ERANGE: Policy version number overflow
* -EINVAL: Policy version parsing error
* -EPERM: Insufficient permission
* -ENOMEM: Out of memory (OOM)
* -EBADMSG: Policy is invalid
Here are some examples of the updated audit record types:
AUDIT_IPE_POLICY_LOAD(1422):
audit: AUDIT1422 policy_name="Test_Policy" policy_version=0.0.1
policy_digest=sha256:84EFBA8FA71E62AE0A537FAB962F8A2BD1053964C4299DCA
92BFFF4DB82E86D3 auid=1000 ses=3 lsm=ipe res=1 errno=0
The above record shows a new policy has been successfully loaded into
the kernel with the policy name, version, and hash with the errno=0.
AUDIT_IPE_POLICY_LOAD(1422) with error:
audit: AUDIT1422 policy_name=? policy_version=? policy_digest=?
auid=1000 ses=3 lsm=ipe res=0 errno=-74
The above record shows a policy load failure due to an invalid policy
(-EBADMSG).
By adding this error field, we ensure that all policy load attempts,
whether successful or failed, are logged, providing a comprehensive
audit trail for IPE policy management.
Signed-off-by: Jasjiv Singh <jasjivsingh@linux.microsoft.com>
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
Thangaraj Samynathan says:
====================
Refactor PHY reset handling and fix WOL
This patch series refines the PHY reset and initialization logic in
the lan743x driver. Enhance the robustness of the driver initialization
process and prevent WOL-related issues during suspend/resume cycles.
====================
Link: https://patch.msgid.link/20250526053048.287095-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove lan743x_phy_init from lan743x_hardware_init as it resets the PHY
registers, causing WOL to fail on subsequent attempts. Add a call to
lan743x_hw_reset_phy in the probe function to ensure the PHY is reset
during device initialization.
Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250526053048.287095-3-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rename the function to lan743x_hw_reset_phy to better describe it
operation.
Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250526053048.287095-2-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Issue flagged by coverity. Add a safety check for the return value
of dma_set_mask_and_coherent, go to a safe exit if it returns error.
Link: https://scan7.scan.coverity.com/#/project-view/53936/11354?selectedIssue=1643754
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20250526032034.84900-1-sperezglz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both to_mdio_device() and to_phy_device() "throw away" the const pointer
attribute passed to them and return a non-const pointer, which generally
is not a good thing overall. Fix this up by using container_of_const()
which was designed for this very problem.
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Fixes: 7eab14de73a8 ("mdio, phy: fix -Wshadow warnings triggered by nested container_of()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052246-conduit-glory-8fc9@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GENERIC_ALLOCATOR is a non-prompt kconfig, meaning users can't enable it
selectively. All kconfig users of GENERIC_ALLOCATOR select it, except of
NET_DEVMEM which only depends on it, there is no easy way to turn
GENERIC_ALLOCATOR on unless we select other unnecessary configs that
will select it.
Instead of depending on it, select it when NET_DEVMEM is enabled.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/1747950086-1246773-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'struct thermal_zone_device_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
2912 1064 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o
After:
=====
text data bss dec hex filename
3040 936 0 3976 f88 drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e6416e0d15ea27a55fe1fb4e349928ac7bae1b95.1748164843.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'struct thermal_zone_device_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, also constify a struct thermal_zone_params.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
24899 8036 0 32935 80a7 drivers/net/ethernet/mellanox/mlxsw/core_thermal.o
After:
=====
text data bss dec hex filename
25379 7556 0 32935 80a7 drivers/net/ethernet/mellanox/mlxsw/core_thermal.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4516676973f5adc1cdb76db1691c0f98b6fa6614.1748164348.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was intended to be negative -ENOMEM but the '-' character was left
off accidentally. This typo doesn't affect runtime because the caller
treats all non-zero returns the same.
Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/aDCbjNcquNC68Hyj@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tipc_aead_free() function currently uses kfree() to release the aead
structure. However, this structure contains sensitive information, such
as key's SALT value, which should be securely erased from memory to
prevent potential leakage.
To enhance security, replace kfree() with kfree_sensitive() when freeing
the aead structure. This change ensures that sensitive data is explicitly
cleared before memory deallocation, aligning with the approach used in
tipc_aead_init() and adhering to best practices for handling confidential
information.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250523114717.4021518-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the Python YNL extack decoding to handle sub-messages in the same
way that YNL C does. This involves retaining the input values so that
they are available during extack decoding.
./tools/net/ynl/pyynl/cli.py --family rt-link --do newlink --create \
--json '{
"linkinfo": {"kind": "netkit", "data": {"policy": 10} }
}'
Netlink error: Invalid argument
nl_len = 92 (76) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Provided default xmit policy not supported', 'bad-attr': '.linkinfo.data(netkit).policy'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250523103031.80236-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We stop queues in ndo_stop, so they need to be restarted in ndo_open.
This allows us to resume tx after a link down/up cycle.
Suggested-by: Nitin Singh <nitsingh@nvidia.com>
Fixes: 0791c0327a6e ("net: mctp: Add MCTP USB transport driver")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250526-dev-mctp-usb-v1-1-c7bd6cb75aa0@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function mlx5_query_nic_vport_node_guid() calls the function
mlx5_query_nic_vport_context() but does not check its return value.
A proper implementation can be found in mlx5_nic_vport_query_local_lb().
Add error handling for mlx5_query_nic_vport_context(). If it fails, free
the out buffer via kvfree() and return error code.
Fixes: 9efa75254593 ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250524163425.1695-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If register_netdev() fails, the error handling path of the probe will not
free the memory allocated by the previous airoha_metadata_dst_alloc() call
because port->dev->reg_state will not be NETREG_REGISTERED.
So, an explicit airoha_metadata_dst_free() call is needed in this case to
avoid a memory leak.
Fixes: af3cf757d5c9 ("net: airoha: Move DSA tag in DMA descriptor")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1b94b91345017429ed653e2f05d25620dc2823f9.1746715755.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a potential crash issue when disabling and re-enabling the
network port. When disabling the network port, phy_detach() calls
device_link_del() to remove the device link, but it does not clear
phydev->devlink, so phydev->devlink is not a NULL pointer. Then the
network port is re-enabled, but if phy_attach_direct() fails before
calling device_link_add(), the code jumps to the "error" label and
calls phy_detach(). Since phydev->devlink retains the old value from
the previous attach/detach cycle, device_link_del() uses the old value,
which accesses a NULL pointer and causes a crash. The simplified crash
log is as follows.
[ 24.702421] Call trace:
[ 24.704856] device_link_put_kref+0x20/0x120
[ 24.709124] device_link_del+0x30/0x48
[ 24.712864] phy_detach+0x24/0x168
[ 24.716261] phy_attach_direct+0x168/0x3a4
[ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c
[ 24.725140] phylink_of_phy_connect+0x1c/0x34
Therefore, phydev->devlink needs to be cleared when the device link is
deleted.
Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250523083759.3741168-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Airoha AN7583 PHY support based on Airoha AN7581 with the small
difference that BMCR_PDOWN is enabled by default and needs to be cleared
to make the internal PHY correctly work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250522165313.6411-4-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Airoha AN7583 Switch support. This is based on Airoha EN7581 that is
based on Mediatek MT7988 Switch.
Airoha AN7583 require additional tweak to the GEPHY_CONN_CFG register to
make the internal PHY work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250522165313.6411-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add airoha,an7583-switch additional compatible to the mt7530 DSA Switch
Family. This is an exact match of the airoha,en7581-switch (based on
mt7988-switch) with the additional requirement of tweak on the
GEPHY_CONN_CFG registers to make the internal PHY actually work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250522165313.6411-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a new fault type FAULT_VMALLOC to simulate no memory error in
f2fs_vmalloc().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
.init_{,de}compress_ctx uses kvmalloc() to alloc memory, it will try
to allocate physically continuous page first, it may cause more memory
allocation pressure, let's use vmalloc instead to mitigate it.
[Test]
cd /data/local/tmp
touch file
f2fs_io setflags compression file
f2fs_io getflags file
for i in $(seq 1 10); do sync; echo 3 > /proc/sys/vm/drop_caches;\
time f2fs_io write 512 0 4096 zero osync file; truncate -s 0 file;\
done
[Result]
Before After Delta
21.243 21.694 -2.12%
For compression, we recommend to use ioctl to compress file data in
background for workaround.
For decompression, only zstd will be affected.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
mapping_read_folio_gfp() will return a folio, it should always be
uptodate, let's check folio uptodate status to detect any potenial
bug.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add f2fs_bug_on() to check whether memory preallocation will fail or
not after radix_tree_preload(GFP_NOFS | __GFP_NOFAIL).
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Since __f2fs_crc32() now calls crc32() directly, it no longer uses its
sbi argument. Remove that, and simplify its callers accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant part of these changes is an ACPICA update
covering two upstream ACPICA releases, 20241212 and 20250404, that
have not been included into the kernel code base yet.
Among other things, it adds definitions needed to address GCC 15's
-Wunterminated-string-initialization warnings, adds support for three
new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2,
DMAR), and fixes some issues.
On top of the above, there is a new parser for the MRRM table, more
changes related to GCC 15's -Wunterminated-string-initialization
warnings, a CPPC library update including functions related to
autonomous CPU performance state selection, a couple of new quirks,
some assorted fixes and some code cleanups.
Specifics:
- Fix two ACPICA SLAB cache leaks (Seunghun Han)
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification
and the code (Zaid Alali)
- Fix typo in comments for SRAT structures (Adam Lackorzynski)
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre)
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin)
- Add support for printing AML arguments when the ACPICA debug level
is ACPI_LV_TRACE_POINT (Mario Limonciello)
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla)
- Apply pack(1) to union aml_resource (Tamir Duberstein)
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk)
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman)
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck)
- Add definitions for RIMT to ACPICA (Sunil V L)
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King)
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck)
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem)
- Rename structure and field names of the RAS2 table in actbl2.h
(Shiju Jose)
- Fix up whitespace in acpica/utcache.c (Zhe Qiao)
- Avoid sequence overread in a call to strncmp() in
ap_get_table_length() and replace strncpy() with memcpy() in ACPICA
in some places (Ahmed Salem)
- Update copyright year in all ACPICA files (Saket Dumbre)
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook)
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil
Keshavamurthy)
- Remove an (explicitly) unused header file include from the VIOT
ACPI table parser file (Andy Shevchenko)
- Improve logging around acpi_initialize_tables() (Bartosz
Szczepanek)
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui)
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich)
- Simplify PCC shared memory region handling (Sudeep Holla)
- Rework and extend functions for reading CPPC register values and
for updating CPPC registers (Lifeng Zheng)
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng)
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into
a const pointer (Pei Xiao)
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao)
- Make the ACPI battery driver report the current as a negative
number to the power supply framework when the battery is
discharging as documented (Peter Marheine)
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
list to prevent spurious wakeups from suspend-to-idle (Werner
Sembach)
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla,
Jon Hunter)
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali)
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai)
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael
Wysocki)
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti)
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus)
- Fail the ACPI bus registration if acpi_kobj registration fails
(Armin Wolf)"
* tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI: MRRM: Fix default max memory region
ACPI: bus: Bail out if acpi_kobj registration fails
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for a new feature, Platform Temperature Control
(PTC), to the Intel int340x thermal driver, add support for the Airoha
EN7581 thermal sensor and the IPQ5018 platform, fix up the ACPI
thermal zones handling, fix other assorted issues and clean up code
Specifics:
- Add Platform Temperature Control (PTC) support to the Intel int340x
thermal driver (Srinivas Pandruvada)
- Make the Hisilicon thermal driver compile by default when ARCH_HISI
is set (Krzysztof Kozlowski)
- Clean up printk() format by using %pC instead of %pCn in the
bcm2835 thermal driver (Luca Ceresoli)
- Fix variable name coding style in the AmLogic thermal driver
(Enrique Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS thermal driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm_ variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its
suppot to the QCom Tsens thermal driver (Sricharan Ramabadhran,
George Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi, Colin
Ian King)
- Address a sparse warning by making a local variable static in the
QCom thermal driver (George Moussalem)
- Fix the usage of the _SCP control method in the driver for ACPI
thermal zones (Armin Wolf)"
* tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: qcom: ipq5018: make ops_ipq5018 struct static
thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration"
ACPI: thermal: Execute _SCP before reading trip points
ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Scan the eMMC boot areas for partition table
- Clarify purpose of mmc_can* functions by renaming them to mmc_card_can*
- Clarify helpers for host capabilities by renaming them to mmc_host_can*
- Add support for graceful host removal for SD and eMMC
- Further avoid re-storing power to the eMMC before a shutdown
- Add quirk to disable DDR50 tuning and use it for some Swissbit SD-cards
MMC host:
- mtk-sd: Add support for Dimensity 1200 MT6893
- mtk-sd: Fix condition to enable single burst type
- mtk-sd: Optimize several code-paths by aggregating register-writes
- renesas_sdhi: Add support for the Renesas RZ/V2N variant
- sdhci-msm: Add support for the SM7150 variant
- sdhci-esdhc-imx: Re-factor the system PM logic
- sdhci-esdhc-imx: Lots of improvements around the tuning support
- sdhci-of-arasan: Add support for the Renesas RZ/N1D variant
- sdhci-of-dwcmhsc: Add Sophgo SG2044 support
- sdhci-of-esdhc: Add support for the LS1021a variant
- sdhci-of-k1: Add new driver to support for SpacemiT K1 controller
- sdhci-pic32: Convert microchip,sdhci-pic32 DT doc to json schema
- wmt-sdmmc: Convert DT doc to json schema"
* tag 'mmc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
dt-bindings: mmc: sdhci-of-dwcmhsc: Allow use of a power-domain
mmc: sdhci-esdhc-imx: fix few build warnings
mmc: bcm2835: Use str_read_write() helper
mmc: host: sdhci-esdhc-imx: refactor the system PM logic
mmc: sdhci: export APIs for sdhci irq wakeup
mmc: sdhci-of-k1: add support for SpacemiT K1 SoC
dt-bindings: mmc: spacemit,sdhci: add support for K1 SoC
mmc: core: Scan the eMMC boot areas for partition table
dt-binding: mmc: microchip,sdhci-pic32: convert text based binding to json schema
mmc: rename mmc_boot_partition_access() to mmc_host_can_access_boot()
mmc: rename mmc_host_uhs() to mmc_host_can_uhs()
mmc: rename mmc_host_done_complete() to mmc_host_can_done_complete()
mmc: rename mmc_host_cmd23() to mmc_host_can_cmd23()
mmc: sdhci-esdhc-imx: fix defined but not used warnings
dt-bindings: mmc: vt8500-sdmmc: Convert to YAML
dt-bindings: mmc: sdhci-msm: Add the SM7150 compatible
dt-bindings: mmc: fsl,esdhc: add compatible string fsl,ls1021a-esdhc
mmc: cavium-thunderx: Use non-hybrid PCI devres API
dt-bindings: mmc: mtk-sd: Add support for Dimensity 1200 MT6893
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo SG2044 support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add residency reflection for domain-idlestates to debugfs
- Add genpd helper to correct the usage/rejected counters
pmdomain providers:
- mediatek: Add support for Dimensity 1200 MT6893
- qcom: Add support for SM4450 power domains
- rockchip: Add support for RK3562 SoC
- sunxi: Add support for Allwinner H6/H616 PRCM PPU
- ti: Fix STANDBY handling of OMAP2+ PER power domain
cpuidle-psci:
- Correct the domain-idlestate statistics in debugfs"
* tag 'pmdomain-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (23 commits)
pmdomain: ti: Fix STANDBY handling of PER power domain
pmdomain: amlogic: Constify some structures
pmdomain: core: Use genpd->opp_table to simplify error/remove path
pmdomain: core: Simplify return statement in genpd_power_off()
pmdomain: core: Convert genpd_power_off() to void
pmdomain: core: Convert to device_awake_path()
pmdomain: mediatek: Add error messages for missing regmaps
pmdomain: arm: Do not enable by default during compile testing
pmdomain: qcom: rpmhpd: Add SM4450 power domains
dt-bindings: power: qcom,rpmpd: Add SM4450 compatible
pmdomain: sunxi: add H6 PRCM PPU driver
dt-bindings: power: Add Allwinner H6/H616 PRCM PPU
pmdomain: bcm: bcm2835-power: Use devm_clk_get_optional
pmdomain: rockchip: Add support for RK3562 SoC
dt-bindings: power: rockchip: Add support for RK3562 SoC
pmdomain: mediatek: Add support for Dimensity 1200 MT6893
pmdomain: mediatek: Bump maximum bus protect data array elements
dt-bindings: power: mediatek: Support Dimensity 1200 MT6893 MTCMOS
pmdomain: core: Reset genpd->states to avoid freeing invalid data
pmdomain: core: Add residency reflection for domain-idlestates to debugfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- support charge_types in extensions
Power-supply drivers:
- new driver for Pegatron Chagall battery
- new driver for Maxim MAX8971 charger
- new driver for Huawei Matebook E Go
- bq27xxx: retry failed I2C transmissions
- bq24190: add BQ24193 support
- misc small cleanups and fixes
Reset drivers:
- new driver for Toradex SMARC Embedded Controller
- reboot-mode: add support for modes containing / in DT
- atmel,at91sam9260-reset: support sama7d65
- syscon-reboot: add Google GS101 support
- misc small cleanups and fixes"
* tag 'for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
power: supply: rt9471: Simplify definition of some struct linear_range
power: supply: max77976: add EXTCON dependency
power: supply: Add support for Maxim MAX8971 charger
dt-bindings: power: supply: Document Maxim MAX8971 charger
power: supply: max17040: adjust thermal channel scaling
power: reset: syscon-reboot: add gs101-specific reset
dt-bindings: reset: syscon-reboot: add google,gs101-reboot
power: supply: add Huawei Matebook E Go psy driver
power: supply: Add driver for Pegatron Chagall battery
dt-bindings: power: supply: Document Pegatron Chagall fuel gauge
dt-bindings: vendor-prefixes: add prefix for Pegatron Corporation
power: supply: cros_charge-control: Avoid -Wflex-array-member-not-at-end warning
power: reset: add Toradex Embedded Controller
dt-bindings: power: reset: add toradex,smarc-ec
power: supply: support charge_types in extensions
power: supply: max77705: Fix workqueue error handling in probe
power: supply: wm831x: Constify struct chg_map and some arrays
power: bq24190: Add BQ24193 support
dt-bindings: power: supply: bq24190: Add BQ24193 compatible
power: supply: sysfs: Remove duplicate NUL termination
...
|
