| Age | Commit message (Collapse) | Author |
|---|
|
With the new large sector size support, it's now the case that
set_blocksize can change i_blksize and the folio order in a manner that
conflicts with a concurrent reader and causes a kernel crash.
Specifically, let's say that udev-worker calls libblkid to detect the
labels on a block device. The read call can create an order-0 folio to
read the first 4096 bytes from the disk. But then udev is preempted.
Next, someone tries to mount an 8k-sectorsize filesystem from the same
block device. The filesystem calls set_blksize, which sets i_blksize to
8192 and the minimum folio order to 1.
Now udev resumes, still holding the order-0 folio it allocated. It then
tries to schedule a read bio and do_mpage_readahead tries to create
bufferheads for the folio. Unfortunately, blocks_per_folio == 0 because
the page size is 4096 but the blocksize is 8192 so no bufferheads are
attached and the bh walk never sets bdev. We then submit the bio with a
NULL block device and crash.
Therefore, truncate the page cache after flushing but before updating
i_blksize. However, that's not enough -- we also need to lock out file
IO and page faults during the update. Take both the i_rwsem and the
invalidate_lock in exclusive mode for invalidations, and in shared mode
for read/write operations.
I don't know if this is the correct fix, but xfs/259 found it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/174543795699.4139148.2086129139322431423.stgit@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add MAINTAINERS entry for the Sitronix ST7571 dot matrix LCD
controller.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250423-st7571-v6-3-e9519e3c4ec4@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Sitronix ST7571 is a 4bit gray scale dot matrix LCD controller.
The controller has a SPI, I2C and 8bit parallel interface, this
driver is for the I2C interface only.
Reviewed-by: Thomas Zimmermann <tzimmrmann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250423-st7571-v6-2-e9519e3c4ec4@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
Sitronix ST7571 is a dot matrix LCD controller supporting
both 4bit grayscale and monochrome LCDs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250423-st7571-v6-1-e9519e3c4ec4@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
When an attribute group is created with sysfs_create_group() or
sysfs_create_files() the ->sysfs_ops() callback is set to
kobj_sysfs_ops, which sets the ->show() callback to kobj_attr_show().
kobj_attr_show() uses container_of() to get the ->show() callback
from the attribute it was passed, meaning the ->show() callback needs
to be the same type as the ->show() callback in 'struct kobj_attribute'.
However, cur_freq_show() has the type of the ->show() callback in
'struct device_attribute', which causes a CFI violation when opening the
'id' sysfs node under gtidle/freq/throttle. This happens to work because
the layout of 'struct kobj_attribute' and 'struct device_attribute' are
the same, so the container_of() cast happens to allow the ->show()
callback to still work.
Changed the type of cur_freq_show() and few more functions to match the
->show() callback in 'struct kobj_attributes' to resolve the CFI
violation.
CFI failure seen while accessing sysfs files under
/sys/class/drm/card0/device/tile0/gt*/gtidle/*
/sys/class/drm/card0/device/tile0/gt*/freq0/*
/sys/class/drm/card0/device/tile0/gt*/freq0/throttle/*
[ 2599.618075] RIP: 0010:__cfi_cur_freq_show+0xd/0x10 [xe]
[ 2599.624452] Code: 44 c1 44 89 fa e8 03 95 39 f2 48 98 5b 41 5e 41 5f 5d c3 c9
[ 2599.646638] RSP: 0018:ffffbe438ead7d10 EFLAGS: 00010286
[ 2599.652823] RAX: ffff9f7d8b3845d8 RBX: ffff9f7dee8c95d8 RCX: 0000000000000000
[ 2599.661246] RDX: ffff9f7e6f439000 RSI: ffffffffc13ada30 RDI: ffff9f7d975d4b00
[ 2599.669669] RBP: ffffbe438ead7d18 R08: 0000000000001000 R09: ffff9f7e6f439000
[ 2599.678092] R10: 00000000e07304a6 R11: ffffffffc1241ca0 R12: ffffffffb4836ea0
[ 2599.688435] R13: ffff9f7e45fb1180 R14: ffff9f7d975d4b00 R15: ffff9f7e6f439000
[ 2599.696860] FS: 000076b02b66cfc0(0000) GS:ffff9f80ef400000(0000) knlGS:00000
[ 2599.706412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2599.713196] CR2: 00005f80d94641a9 CR3: 00000001e44ec006 CR4: 0000000100f72ef0
[ 2599.721618] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2599.730041] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[ 2599.738464] PKRU: 55555554
[ 2599.741655] Call Trace:
[ 2599.744541] <TASK>
[ 2599.747017] ? __die_body+0x69/0xb0
[ 2599.751151] ? die+0xa9/0xd0
[ 2599.754548] ? do_trap+0x89/0x160
[ 2599.758476] ? __cfi_cur_freq_show+0xd/0x10 [xe b37985c94829727668bd7c5b33c1]
[ 2599.768315] ? handle_invalid_op+0x69/0x90
[ 2599.773167] ? __cfi_cur_freq_show+0xd/0x10 [xe b37985c94829727668bd7c5b33c1]
[ 2599.783010] ? exc_invalid_op+0x36/0x60
[ 2599.787552] ? fred_hwexc+0x123/0x1a0
[ 2599.791873] ? fred_entry_from_kernel+0x7b/0xd0
[ 2599.797219] ? asm_fred_entrypoint_kernel+0x45/0x70
[ 2599.802976] ? act_freq_show+0x70/0x70 [xe b37985c94829727668bd7c5b33c1d9998]
[ 2599.812301] ? __cfi_cur_freq_show+0xd/0x10 [xe b37985c94829727668bd7c5b33c1]
[ 2599.822137] ? __kmalloc_node_noprof+0x1f3/0x420
[ 2599.827594] ? __kvmalloc_node_noprof+0xcb/0x180
[ 2599.833045] ? kobj_attr_show+0x22/0x40
[ 2599.837571] sysfs_kf_seq_show+0xa8/0x110
[ 2599.842302] kernfs_seq_show+0x38/0x50
Signed-off-by: Jeevaka Prabu Badrappan <jeevaka.badrappan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250422171852.85558-1-jeevaka.badrappan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
"sockmap_ktls disconnect_after_delete" test has been failing on BPF CI
after recent merges from netdev:
* https://github.com/kernel-patches/bpf/actions/runs/14458537639
* https://github.com/kernel-patches/bpf/actions/runs/14457178732
It happens because disconnect has been disabled for TLS [1], and it
renders the test case invalid.
Removing all the test code creates a conflict between bpf and
bpf-next, so for now only remove the offending assert [2].
The test will be removed later on bpf-next.
[1] https://lore.kernel.org/netdev/20250404180334.3224206-1-kuba@kernel.org/
[2] https://lore.kernel.org/bpf/cfc371285323e1a3f3b006bfcf74e6cf7ad65258@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/bpf/20250416170246.2438524-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This was triggered by one of my mis-uses causing odd build warnings on
sparc in linux-next, but while figuring out why the "obviously correct"
use of cc-option caused such odd breakage, I found eight other cases of
the same thing in the tree.
The root cause is that 'cc-option' doesn't work for checking negative
warning options (ie things like '-Wno-stringop-overflow') because gcc
will silently accept options it doesn't recognize, and so 'cc-option'
ends up thinking they are perfectly fine.
And it all works, until you have a situation where _another_ warning is
emitted. At that point the compiler will go "Hmm, maybe the user
intended to disable this warning but used that wrong option that I
didn't recognize", and generate a warning for the unrecognized negative
option.
Which explains why we have several cases of this in the tree: the
'cc-option' test really doesn't work for this situation, but most of the
time it simply doesn't matter that ity doesn't work.
The reason my recently added case caused problems on sparc was pointed
out by Thomas Weißschuh: the sparc build had a previous explicit warning
that then triggered the new one.
I think the best fix for this would be to make 'cc-option' a bit smarter
about this sitation, possibly by adding an intentional warning to the
test case that then triggers the unrecognized option warning reliably.
But the short-term fix is to replace 'cc-option' with an existing helper
designed for this exact case: 'cc-disable-warning', which picks the
negative warning but uses the positive form for testing the compiler
support.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20250422204718.0b4e3f81@canb.auug.org.au/
Explained-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Michael Larabel reported [1] a nginx performance regression in v6.15-rc3
and bisected it to commit 51339d99c013 ("locking/local_lock, mm: replace
localtry_ helpers with local_trylock_t type")
The problem is the _Generic() usage with a default association that
masks the fact that "local_trylock_t *" association is not being
selected as expected. Replacing the default with the only other
expected type "local_lock_t *" reveals the underlying problem:
include/linux/local_lock_internal.h:174:26: error: ‘_Generic’ selector of type ‘__seg_gs local_lock_t *’ is not compatible with any association
The local_locki's are part of __percpu structures and thus the __percpu
attribute is needed to associate the type properly. Add the attribute
and keep the default replaced to turn any further mismatches into
compile errors.
The failure to recognize local_try_lock_t in __local_lock_release()
means that a local_trylock[_irqsave]() operation will set tl->acquired
to 1 (there's no _Generic() part in the trylock code), but then
local_unlock[_irqrestore]() will not set tl->acquired back to 0, so
further trylock operations will always fail on the same cpu+lock, while
non-trylock operations continue to work - a lockdep_assert() is also not
being executed in the _Generic() part of local_lock() code.
This means consume_stock() and refill_stock() operations will fail
deterministically, resulting in taking the slow paths and worse
performance.
Fixes: 51339d99c013 ("locking/local_lock, mm: replace localtry_ helpers with local_trylock_t type")
Reported-by: Michael Larabel <Michael@phoronix.com>
Closes: https://www.phoronix.com/review/linux-615-nginx-regression/2 [1]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since pulling in the kernel changes in commit 22f72088ffe6 ("tools
headers: Update the syscall table with the kernel sources"), arm64 is
no longer using a generic syscall header and generates one from the
syscall table. Therefore we must also generate the syscall header for
arm64 before building Perf.
Add it as a dependency to libperf which uses one syscall number. Perf
uses more, but as libperf is a dependency of Perf it will be generated
for both.
Future platforms that need this will have to add their own syscall-y
targets in libperf manually. Unfortunately the arch specific files that
do this (e.g. arch/arm64/include/asm/Kbuild) can't easily be imported
into the Perf build. But Perf only needs a subset of the generated files
anyway, so redefining them is probably the correct thing to do.
Fixes: 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250417-james-perf-fix-gen-syscall-v1-1-1d268c923901@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
An empty item is required to terminate the look up loop.
Fixes: ac5b4a24f16f ("ASoC: Intel: soc-acpi-intel-ptl-match: Add cs42l43 support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250423055722.6920-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().
Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.
Have nouveau_fence_context_kill() check for a fence being signaled.
Cc: stable@vger.kernel.org # v5.10+
Fixes: ea13e5abf807 ("drm/nouveau: signal pending fences when channel has been killed")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250415121900.55719-3-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"A small number of fixes:
- virtgpu is exempt from reset shutdown fow now - a more complete fix
is in the works
- spec compliance fixes in:
- virtio-pci cap commands
- vhost_scsi_send_bad_target
- virtio console resize
- missing locking fix in vhost-scsi
- virtio ring - a KCSAN false positive fix
- VHOST_*_OWNER documentation fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: Fix vhost_scsi_send_status()
vhost-scsi: Fix vhost_scsi_send_bad_target()
vhost-scsi: protect vq->log_used with vq->mutex
vhost_task: fix vhost_task_create() documentation
virtio_console: fix order of fields cols and rows
virtio_console: fix missing byte order handling for cols and rows
virtgpu: don't reset on shutdown
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
vhost: fix VHOST_*_OWNER documentation
virtio_pci: Use self group type for cap commands
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for a few on-stack definitions
of a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warnings:
drivers/gpu/drm/nouveau/nouveau_chan.c:274:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nouveau_chan.c:371:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/gpu/drm/nouveau/nouveau_chan.c:524:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://lore.kernel.org/r/Z__wSgHK5_lHw8x9@kspp
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Use __member_size() to get the size of the flex-array member at compile
time, instead of the convoluted expression `__struct_size(p) - sizeof(*p)`
Link: https://lore.kernel.org/r/aAe5o_-f5OYSTXjZ@kspp
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Use __member_size() to get the size of the flex-array member at compile
time, instead of the convoluted expression `__struct_size(p) - sizeof(*p)`
Link: https://lore.kernel.org/r/aAe5eNDnRyGnxLMX@kspp
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Recently _pgd_alloc() was switched from using __get_free_pages() to
pagetable_alloc_noprof(), which might return a compound page in case
the allocation order is larger than 0.
On x86 this will be the case if CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
is set, even if PTI has been disabled at runtime.
When running as a Xen PV guest (this will always disable PTI), using
a compound page for a PGD will result in VM_BUG_ON_PGFLAGS being
triggered when the Xen code tries to pin the PGD.
Fix the Xen issue together with the not needed 8k allocation for a
PGD with PTI disabled by replacing PGD_ALLOCATION_ORDER with an
inline helper returning the needed order for PGD allocations.
Fixes: a9b3c355c2e6 ("asm-generic: pgalloc: provide generic __pgd_{alloc,free}")
Reported-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Petr Vaněk <arkamar@atlas.cz>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250422131717.25724-1-jgross%40suse.com
|
|
There is a spelling mistake in a DRM_DEV_DEBUG_KMS message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
static 'struct decon_data' is only read, so it can be const for code
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Corrected a spelling mistake in the exynos_drm_fimd driver to improve code
readability. No functional changes were made.
Signed-off-by: Anindya Sundar Gayen <anindya.sg@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In the vidi_get_modes() function, if either drm_edid_dup() or
drm_edid_alloc() fails, the function will immediately return 0,
indicating that no display modes can be retrieved. However, in
the event of failure in these two functions, it is still necessary
to call the subsequent drm_edid_connector_update() function with
a NULL drm_edid as an argument. This ensures that operations such
as connector settings are performed in its callee function,
_drm_edid_connector_property_update. To maintain the integrity of
the operation, redundant error handling needs to be removed.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
It is not needed since drm_atomic_helper_shutdown checks it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The initialization of async_handlers_list
was accidentally removed in a previous change.
This patch restores the missing initialization
to ensure proper handler registration.
Fixes: 6895d74c11d8 ("wifi: iwlwifi: mld: initialize regulatory early")
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423092503.35206-1-itamar.shalev@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq fixes for 6.15-rc from Viresh Kumar:
"- Fix possible out-of-bound / null-ptr-deref in drivers (Andre Przywara
and Henry Martin).
- Fix Kconfig issues with compile-test (Johan Hovold and Krzysztof
Kozlowski).
- Fix invalid return value in .get() (Marc Zyngier).
- Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo)."
* tag 'cpufreq-arm-fixes-6.15-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: fix compile-test defaults
cpufreq: cppc: Fix invalid return value in .get() callback
cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate()
cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate()
cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate()
cpufreq: Do not enable by default during compile testing
cpufreq: Add SM8650 to cpufreq-dt-platdev blocklist
cpufreq: sun50i: prevent out-of-bounds access
|
|
plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.
This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
<TASK>
probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
hub_port_connect drivers/usb/core/hub.c:5477 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
port_event drivers/usb/core/hub.c:5773 [inline]
hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
kthread+0x28d/0x320 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can't rely on the SCRATCH register being 0 on platform that power
gate the NIC in S3. Even in those platforms, the SCRATCH register is
still returning 0x1010000.
Make sure that we understand that those platforms have powered off the
device.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.
Fix that by failing gracefully.
Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Perhaps IWL_FW_CHECK() is a bit misnamed, but it just returns
the value of the inner condition. Therefore, the current code
skips the actual function when it has the BAID data and makes
it crash later when it doesn't. Fix the logic.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.9c0b84c44c3b.Ied236258854b149960eb357ec61bf3a572503fbc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When errors occur repeatedly, the driver shouldn't go into a
tight loop trying to reset the device. Implement the backoff
I had already defined IWL_TRANS_RESET_DELAY for, but clearly
forgotten the implementation of.
Fixes: 9a2f13c40c63 ("wifi: iwlwifi: implement reset escalation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.8816e299efa2.I82cde34e2345a2b33b1f03dbb040f5ad3439a5aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When mac80211 switches between non-MLO and MLO it will recreate the
debugfs directories. This results in the add_if_debugfs handler being
called multiple times. As the convenience symlink is created in the mld
debugfs directory and not the vif, it will not be removed by mac80211
when this happens and still exists.
Add a check and only create the convenience symlink if we have not yet
done so.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.2490696f032a.I74319c7cf18f7e16a3d331cb96e38504b9fbab66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.3331d1686556.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.1a8579662437.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 75a3313f52b7e08e7e73746f69a68c2b7c28bb2b.
The indication of the BW limitation in the sub-device ID is not applicable
for Killer devices. For those devices, bw_limit will hold a random value,
so a matching dev_info might not be found, which leads to a probe
failure.
Until it is properly fixed, revert this.
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029
Fixes: 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420115541.36dd3007151e.I66b6b78db09bfea12ae84dd85603cf1583271474@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit 16a8d9a739430bec9c11eda69226c5a39f3478aa.
This device needs commit 75a3313f52b7 ("wifi: iwlwifi: make no_160 more generic"),
which has a bug and is being reverted until it is fixed.
Since this device wasn't shipped yet it is ok to not support it.
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220029
Fixes: 16a8d9a73943 ("wifi: iwlwifi: add support for BE213")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420115541.581160ae3e4b.Icecc46baee8a797c00ad04fab92d7d1114b84829@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This code was accidentally dropped during the cooked
monitor removal, but really should've been simplified
instead. Add the simple version back.
Fixes: 286e69677065 ("wifi: mac80211: Drop cooked monitor support")
Link: https://patch.msgid.link/20250422213251.b3d65fd0f323.Id2a6901583f7af86bbe94deb355968b238f350c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The headphone clamps cause fairly loud pops during type detect
because they sink current from the detection process itself. Disable
the clamps whilst the type detect runs, to improve the detection
pop performance.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250423090944.1504538-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If we use the 'B' mode and we have an invalit table line,
cancel_delayed_work_sync would trigger a warning. This commit avoids the
warning.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and
try_verify_in_tasklet are enabled.
[ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421
[ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4
[ 129.444740][ T934] preempt_count: 201, expected: 0
[ 129.444756][ T934] RCU nest depth: 0, expected: 0
[ 129.444781][ T934] Preemption disabled at:
[ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248
[ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16!
[ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0
[ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8
[ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT)
[ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work
[ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug]
[ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c
[ 129.447451][ T934] sp : ffffffc0843dbc90
[ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b
[ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68
[ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900
[ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030
[ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358
[ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003
[ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400
[ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8
[ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0
[ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000
[ 129.447647][ T934] Call trace:
[ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6]
[ 129.447681][ T934] __might_resched+0x190/0x1a8
[ 129.447694][ T934] shrink_work+0x180/0x248
[ 129.447706][ T934] process_one_work+0x260/0x624
[ 129.447718][ T934] worker_thread+0x28c/0x454
[ 129.447729][ T934] kthread+0x118/0x158
[ 129.447742][ T934] ret_from_fork+0x10/0x20
[ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000)
[ 129.447772][ T934] ---[ end trace 0000000000000000 ]---
dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet
is enabled, and __scan will be called in atomic context.
Fixes: 7cd326747f46 ("dm bufio: remove dm_bufio_cond_resched()")
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The devm_kzalloc() function doesn't return error pointers, it returns
NULL on error. Then on the next line it checks the same pointer again
by mistake, "->base" instead of "->base[0]".
Fixes: fe412e3a6c97 ("pinctrl: mediatek: common-v1: Fix EINT breakage on older controllers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/aAijc10fHka1WAMX@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add entries to unsupported WMI codes in ideapad_keymap[] and one
check for WMI code 0x13d to trigger platform_profile_cycle().
Signed-off-by: Gašper Nemgar <gasper.nemgar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250418070738.7171-1-gasper.nemgar@gmail.com
[ij: joined nested if ()s & major tweaks to changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ASUS firmware resets OOBE state during S4 suspend, so the keyboard
blinks during resume from hibernation. This patch disables OOBE state
after resume from hibernation.
Signed-off-by: Pavel Nikulin <pavel@noa-labs.com>
Link: https://lore.kernel.org/r/20250418140706.1691-1-pavel@noa-labs.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to Alienware m15 R7.
Cc: stable@vger.kernel.org
Tested-by: Romain THERY <romain.thery@ik.me>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250419-m15-r7-v1-1-18c6eaa27e25@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Pantherlake ACPI device ID to the Intel HID driver.
While there, clean up the device ID table to remove the ", 0" parts.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250421041332.830136-1-saranya.gopal@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Calculate the true offset of eint according to index.
Fixes: 3ef9f710efcb ("pinctrl: mediatek: Add EINT support for multiple addresses")
Signed-off-by: Hao Chang <ot_chhao.chang@mediatek.com>
Signed-off-by: Qingliang Li <qingliang.li@mediatek.com>
Link: https://lore.kernel.org/20250422075216.14073-1-ot_chhao.chang@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add a device DebugFS file that displays a complete list of all the DRM
GEM objects that are exposed to UM through a DRM handle.
Since leaking object identifiers that might belong to a different NS is
inadmissible, this functionality is only made available in debug builds
with DEBUGFS support enabled.
File format is that of a table, with each entry displaying a variety of
fields with information about each GEM object.
Each GEM object entry in the file displays the following information
fields: Client PID, BO's global name, reference count, BO virtual size,
BO resize size, VM address in its DRM-managed range, BO label and a GEM
state flags.
There's also a usage flags field for the type of BO, which tells us
whether it's a kernel BO and/or mapped onto the FW's address space.
GEM state and usage flag meanings are printed in the file prelude, so
that UM parsing tools can interpret the numerical values in the table.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250423021238.1639175-5-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Kernel BO's aren't exposed to UM, so labelling them is the responsibility
of the driver itself. This kind of tagging will prove useful in further
commits when want to expose these objects through DebugFS.
Expand panthor_kernel_bo_create() interface to take a NUL-terminated
string. No bounds checking is done because all label strings are given
as statically-allocated literals, but if a more complex kernel BO naming
scheme with explicit memory allocation and formatting was desired in the
future, this would have to change.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250423021238.1639175-4-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Allow UM to label a BO for which it possesses a DRM handle.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250423021238.1639175-3-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Add a new character string Panthor BO field, and a function that allows
setting it from within the driver.
Driver takes care of freeing the string when it's replaced or no longer
needed at object destruction time, but allocating it is the responsibility
of callers.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250423021238.1639175-2-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Userspace is still alive and kicking at this point so actually moving
pinned stuff here is tricky. However, we can instead pre-allocate the
backup storage upfront from the notifier, such that we scoop up as much
as we can, and then leave the final .suspend() to do the actual copy (or
allocate anything that we missed). That way the bulk of our allocations
will hopefully be done outside the more restrictive .suspend().
We do need to be extra careful though, since the pinned handling can now
race with PM notifier, like something becoming unpinned after we prepare
it from the notifier.
v2 (Thomas):
- Fix kernel doc and drop the pin as soon as we are done with the
restore, instead of deferring to later.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250416150913.434369-8-matthew.auld@intel.com
|
|
We end up needing to grab both locks together anyway and keep them held
until we complete the copy or add the fence. Plus the backup_obj is
short lived and tied to the parent object, so seems reasonable to share
the same dma-resv. This will simplify the locking here, and in follow
up patches.
v2:
- Hold reference to the parent bo to be sure the shared dma-resv can't
go out of scope too soon. (Thomas)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250416150913.434369-7-matthew.auld@intel.com
|
