summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-07IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddrMike Marciniszyn
This buffer is currently allocated in hfi1_init(): if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* allocate dummy tail memory for all receive contexts */ dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); ret = -ENOMEM; goto done; } The reinit triggered path will overwrite the old allocation and leak it. Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation to hfi1_free_devdata(). Link: https://lore.kernel.org/r/20211129192008.101968.91302.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: 46b010d3eeb8 ("staging/rdma/hfi1: Workaround to prevent corruption during packet delivery") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Fix early init panicMike Marciniszyn
The following trace can be observed with an init failure such as firmware load failures: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 0 PID: 537 Comm: kworker/0:3 Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Workqueue: events work_for_cpu_fn RIP: 0010:0x0 Code: Bad RIP value. RSP: 0000:ffffae5f878a3c98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff95e48e025c00 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff95e48e025c00 RBP: ffff95e4bf3660a4 R08: 0000000000000000 R09: ffffffff86d5e100 R10: ffff95e49e1de600 R11: 0000000000000001 R12: ffff95e4bf366180 R13: ffff95e48e025c00 R14: ffff95e4bf366028 R15: ffff95e4bf366000 FS: 0000000000000000(0000) GS:ffff95e4df200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000f86a0a003 CR4: 00000000001606f0 Call Trace: receive_context_interrupt+0x1f/0x40 [hfi1] __free_irq+0x201/0x300 free_irq+0x2e/0x60 pci_free_irq+0x18/0x30 msix_free_irq.part.2+0x46/0x80 [hfi1] msix_clean_up_interrupts+0x2b/0x70 [hfi1] hfi1_init_dd+0x640/0x1a90 [hfi1] do_init_one.isra.19+0x34d/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 The free_irq() results in a callback to the registered interrupt handler, and rcd->do_interrupt is NULL because the receive context data structures are not fully initialized. Fix by ensuring that the do_interrupt is always assigned and adding a guards in the slow path handler to detect and handle a partially initialized receive context and noop the receive. Link: https://lore.kernel.org/r/20211129192003.101968.33612.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: b0ba3c18d6bf ("IB/hfi1: Move normal functions from hfi1_devdata to const array") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Insure use of smp_processor_id() is preempt disabledMike Marciniszyn
The following BUG has just surfaced with our 5.16 testing: BUG: using smp_processor_id() in preemptible [00000000] code: mpicheck/1581081 caller is sdma_select_user_engine+0x72/0x210 [hfi1] CPU: 0 PID: 1581081 Comm: mpicheck Tainted: G S 5.16.0-rc1+ #1 Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0016.033120161139 03/31/2016 Call Trace: <TASK> dump_stack_lvl+0x33/0x42 check_preemption_disabled+0xbf/0xe0 sdma_select_user_engine+0x72/0x210 [hfi1] ? _raw_spin_unlock_irqrestore+0x1f/0x31 ? hfi1_mmu_rb_insert+0x6b/0x200 [hfi1] hfi1_user_sdma_process_request+0xa02/0x1120 [hfi1] ? hfi1_write_iter+0xb8/0x200 [hfi1] hfi1_write_iter+0xb8/0x200 [hfi1] do_iter_readv_writev+0x163/0x1c0 do_iter_write+0x80/0x1c0 vfs_writev+0x88/0x1a0 ? recalibrate_cpu_khz+0x10/0x10 ? ktime_get+0x3e/0xa0 ? __fget_files+0x66/0xa0 do_writev+0x65/0x100 do_syscall_64+0x3a/0x80 Fix this long standing bug by moving the smp_processor_id() to after the rcu_read_lock(). The rcu_read_lock() implicitly disables preemption. Link: https://lore.kernel.org/r/20211129191958.101968.87329.stgit@awfm-01.cornelisnetworks.com Cc: stable@vger.kernel.org Fixes: 0cb2aa690c7e ("IB/hfi1: Add sysfs interface for affinity setup") Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07IB/hfi1: Correct guard on eager buffer deallocationMike Marciniszyn
The code tests the dma address which legitimately can be 0. The code should test the kernel logical address to avoid leaking eager buffer allocations that happen to map to a dma address of 0. Fixes: 60368186fd85 ("IB/hfi1: Fix user-space buffers mapping with IOMMU enabled") Link: https://lore.kernel.org/r/20211129191952.101968.17137.stgit@awfm-01.cornelisnetworks.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-12-07nvme: fix use after free when disconnecting a reconnecting ctrlRuozhu Li
A crash happens when trying to disconnect a reconnecting ctrl: 1) The network was cut off when the connection was just established, scan work hang there waiting for some IOs complete. Those I/Os were retried because we return BLK_STS_RESOURCE to blk in reconnecting. 2) After a while, I tried to disconnect this connection. This procedure also hangs because it tried to obtain ctrl->scan_lock. It should be noted that now we have switched the controller state to NVME_CTRL_DELETING. 3) In nvme_check_ready(), we always return true when ctrl->state is NVME_CTRL_DELETING, so those retrying I/Os were issued to the bottom device which was already freed. To fix this, when ctrl->state is NVME_CTRL_DELETING, issue cmd to bottom device only when queue state is live. If not, return host path error to the block layer Signed-off-by: Ruozhu Li <liruozhu@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-12-07nvme-multipath: set ana_log_size to 0 after free ana_log_bufHou Tao
Set ana_log_size to 0 when ana_log_buf is freed to make sure nvme_mpath_init_identify will do the right thing when retrying after an earlier failure. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-12-07drm/bridge: parade-ps8640: Add backpointer to drm_device in drm_dp_auxDouglas Anderson
When we added the support for the AUX channel in commit 13afcdd7277e ("drm/bridge: parade-ps8640: Add support for AUX channel") we forgot to set "drm_dev" to avoid the warning splat at the beginning of drm_dp_aux_register(). Since everything was working I guess I never noticed the splat when testing against mainline. In any case, it's easy to fix. This is basically just like commit 6cba3fe43341 ("drm/dp: Add backpointer to drm_device in drm_dp_aux") but just for the parade-ps8640. Fixes: 13afcdd7277e ("drm/bridge: parade-ps8640: Add support for AUX channel") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Philip Chen <philipchen@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211206162907.1.I1f5d1eba741e4663050ec1b8e39a753f6e42e38b@changeid
2021-12-07PCI: apple: Follow the PCIe specifications when resetting the portMarc Zyngier
While the Apple PCIe driver works correctly when directly booted from the firmware, it fails to initialise when the kernel is booted from a bootloader using PCIe such as u-boot. That's because we're missing a proper reset of the port (we only clear the reset, but never assert it). The PCIe spec requirements are two-fold: - PERST# must be asserted before setting up the clocks and stay asserted for at least 100us (Tperst-clk) - Once PERST# is deasserted, the OS must wait for at least 100ms "from the end of a Conventional Reset" before we can start talking to the devices Implementing this results in a booting system. [bhelgaas: #PERST -> PERST#, update spec references to current] Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") Link: https://lore.kernel.org/r/20211123180636.80558-2-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Acked-by: Pali Rohár <pali@kernel.org> Cc: Alyssa Rosenzweig <alyssa@rosenzweig.io> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-12-07drm/panel: Update Boe-tv110c9m and Inx-hj110iz initial codeyangcong
At present, we have enough panel to confirm the effect, update the initial code to achieve the best effect. Such as gamma, Gop timing. They are all minor modifications and doesn't affect the lighting of the panel. a)Boe-tv110c9m panel Optimized touch horizontal grain. b)Inx-hj110iz panel Optimized GOP timing and gamma. Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211201023230.344976-1-yangcong5@huaqin.corp-partner.google.com
2021-12-07netfs: fix parameter of cleanup()Jeffle Xu
The order of these two parameters is just reversed. gcc didn't warn on that, probably because 'void *' can be converted from or to other pointer types without warning. Cc: stable@vger.kernel.org Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Fixes: e1b1240c1ff5 ("netfs: Add write_begin helper") Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/ # v1
2021-12-07drm/i915: Allow cdclk squasher to be reconfigured liveVille Syrjälä
Supposedly we should be able to change the cdclk squasher waveform even when many pipes are active. Make it so. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-6-mika.kahola@intel.com
2021-12-07drm/i915/display/dg2: Read CD clock from squasher tableMika Kahola
To calculate CD clock with squasher unit, we set CD clock ratio to fixed value of 34. The CD clock value is read from CD clock squasher table. BSpec: 54034 v2: Read ratio from register (Ville) Drop unnecessary local variable (Ville) Get CD clock from the given table v3: Calculate CD clock frequency based on waveform bit pattern (Ville) [v4: vsyrjala: Actually do a proper blind readout from the hardware] [v5: vsyrjala: Use has_cdclk_squasher()] Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-5-mika.kahola@intel.com
2021-12-07drm/i915/display/dg2: Set CD clock squashing registersMika Kahola
Set CD clock squashing registers based on selected CD clock. v2: use slk_cdclk_decimal() to compute decimal values instead of a specific table (Ville) Set waveform based on CD clock table (Ville) Drop unnecessary local variable (Ville) v3: Correct function naming (Ville) Correct if-else structure (Ville) [v4: vsyrjala: Fix spaces vs. tabs] [v5: vsyrjala: Fix cd2x divider calculation (Uma), Add warn to waveform lookup (Uma), Handle bypass freq in waveform lookup, Generalize waveform handling in bxt_set_cdclk()] Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-4-mika.kahola@intel.com
2021-12-07drm/i915/display/dg2: Sanitize CD clockMika Kahola
In case of CD clock squashing the divider is always 1. We don't need to calculate the divider in use so let's skip that for DG2. v2: Drop unnecessary local variable (Ville) v3: Avoid if-else structure (Ville) [v4: vsyrjala: Fix cd2x divider calculation (Uma), Introduce has_cdclk_squasher()] Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-3-mika.kahola@intel.com
2021-12-07drm/i915/display/dg2: Introduce CD clock squashing tableMika Kahola
For CD clock squashing method, we need to define corresponding CD clock table for reference clocks, dividers and ratios for all CD clock options. BSpec: 54034 v2: Add CD squashing waveforms as part of CD clock table (Ville) v3: Waveform is 16 bits wide (Ville) [v4: vsyrjala: Nuke the non-squasher based table, Set .divider=2 for consistency, Pack intel_cdclk_vals a bit nicer] v5: Fix error in waveform value (Swati) v6 (Lucas): Rebase on upstream v7 (MattR): Drop 40.8, 81.6, and 122.4 MHz frequencies to reflect new bspec update. Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-2-mika.kahola@intel.com
2021-12-07drm/i915/selftests: Follow up on increase timeout in i915_gem_contexts selftestsBruce Chang
Follow up on below commit, to increase the timeout further on new platforms, to accomodate the additional time required for the completion of guc submissions for numerous requests created in loop. commit 5e076529e2652244ec20a86d8f99ba634a16c4f4 Author: Matthew Brost <matthew.brost@intel.com> Date: Mon Jul 26 20:17:03 2021 -0700 drm/i915/selftests: Increase timeout in i915_gem_contexts selftests Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211207003845.12419-1-yu.bruce.chang@intel.com
2021-12-07netfs: Fix lockdep warning from taking sb_writers whilst holding mmap_lockDavid Howells
Taking sb_writers whilst holding mmap_lock isn't allowed and will result in a lockdep warning like that below. The problem comes from cachefiles needing to take the sb_writers lock in order to do a write to the cache, but being asked to do this by netfslib called from readpage, readahead or write_begin[1]. Fix this by always offloading the write to the cache off to a worker thread. The main thread doesn't need to wait for it, so deadlock can be avoided. This can be tested by running the quick xfstests on something like afs or ceph with lockdep enabled. WARNING: possible circular locking dependency detected 5.15.0-rc1-build2+ #292 Not tainted ------------------------------------------------------ holetest/65517 is trying to acquire lock: ffff88810c81d730 (mapping.invalidate_lock#3){.+.+}-{3:3}, at: filemap_fault+0x276/0x7a5 but task is already holding lock: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&mm->mmap_lock#2){++++}-{3:3}: validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b __might_fault+0x87/0xb1 strncpy_from_user+0x25/0x18c removexattr+0x7c/0xe5 __do_sys_fremovexattr+0x73/0x96 do_syscall_64+0x67/0x7a entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (sb_writers#10){.+.+}-{0:0}: validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b cachefiles_write+0x2b3/0x4bb netfs_rreq_do_write_to_cache+0x3b5/0x432 netfs_readpage+0x2de/0x39d filemap_read_page+0x51/0x94 filemap_get_pages+0x26f/0x413 filemap_read+0x182/0x427 new_sync_read+0xf0/0x161 vfs_read+0x118/0x16e ksys_read+0xb8/0x12e do_syscall_64+0x67/0x7a entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (mapping.invalidate_lock#3){.+.+}-{3:3}: check_noncircular+0xe4/0x129 check_prev_add+0x16b/0x3a4 validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b down_read+0x40/0x4a filemap_fault+0x276/0x7a5 __do_fault+0x96/0xbf do_fault+0x262/0x35a __handle_mm_fault+0x171/0x1b5 handle_mm_fault+0x12a/0x233 do_user_addr_fault+0x3d2/0x59c exc_page_fault+0x85/0xa5 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: mapping.invalidate_lock#3 --> sb_writers#10 --> &mm->mmap_lock#2 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_lock#2); lock(sb_writers#10); lock(&mm->mmap_lock#2); lock(mapping.invalidate_lock#3); *** DEADLOCK *** 1 lock held by holetest/65517: #0: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c stack backtrace: CPU: 0 PID: 65517 Comm: holetest Not tainted 5.15.0-rc1-build2+ #292 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: dump_stack_lvl+0x45/0x59 check_noncircular+0xe4/0x129 ? print_circular_bug+0x207/0x207 ? validate_chain+0x461/0x4a8 ? add_chain_block+0x88/0xd9 ? hlist_add_head_rcu+0x49/0x53 check_prev_add+0x16b/0x3a4 validate_chain+0x3c4/0x4a8 ? check_prev_add+0x3a4/0x3a4 ? mark_lock+0xa5/0x1c6 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b ? filemap_fault+0x276/0x7a5 ? rcu_read_unlock+0x59/0x59 ? add_to_page_cache_lru+0x13c/0x13c ? lock_is_held_type+0x7b/0xd3 down_read+0x40/0x4a ? filemap_fault+0x276/0x7a5 filemap_fault+0x276/0x7a5 ? pagecache_get_page+0x2dd/0x2dd ? __lock_acquire+0x8bc/0x949 ? pte_offset_kernel.isra.0+0x6d/0xc3 __do_fault+0x96/0xbf ? do_fault+0x124/0x35a do_fault+0x262/0x35a ? handle_pte_fault+0x1c1/0x20d __handle_mm_fault+0x171/0x1b5 ? handle_pte_fault+0x20d/0x20d ? __lock_release+0x151/0x254 ? mark_held_locks+0x1f/0x78 ? rcu_read_unlock+0x3a/0x59 handle_mm_fault+0x12a/0x233 do_user_addr_fault+0x3d2/0x59c ? pgtable_bad+0x70/0x70 ? rcu_read_lock_bh_held+0xab/0xab exc_page_fault+0x85/0xa5 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x40192f Code: ff 48 89 c3 48 8b 05 50 28 00 00 48 85 ed 7e 23 31 d2 4b 8d 0c 2f eb 0a 0f 1f 00 48 8b 05 39 28 00 00 48 0f af c2 48 83 c2 01 <48> 89 1c 01 48 39 d5 7f e8 8b 0d f2 27 00 00 31 c0 85 c9 74 0e 8b RSP: 002b:00007f9931867eb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00007f9931868700 RCX: 00007f993206ac00 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00007ffc13e06ee0 RBP: 0000000000000100 R08: 0000000000000000 R09: 00007f9931868700 R10: 00007f99318689d0 R11: 0000000000000202 R12: 00007ffc13e06ee0 R13: 0000000000000c00 R14: 00007ffc13e06e00 R15: 00007f993206a000 Fixes: 726218fdc22c ("netfs: Define an interface to talk to a cache") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> cc: Jan Kara <jack@suse.cz> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/ [1] Link: https://lore.kernel.org/r/163887597541.1596626.2668163316598972956.stgit@warthog.procyon.org.uk/ # v1
2021-12-07drm/rockchip: pass 0 to drm_fbdev_generic_setup()John Keeping
Allow drm_fbdev_generic_setup() to pick the default bpp value for the framebuffer. This has no functional impact because the default is 32, given that mode_config.preferred_depth is not set for Rockchip. Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211101114622.813536-1-john@metanate.com
2021-12-07drm/rockchip: use generic fbdev setupJohn Keeping
The Rockchip fbdev code does not add anything compared to drm_fbdev_generic_setup(); the one custom function for .fb_mmap does the same thing as gem_prime_mmap which is called by the helper. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20211029115014.264084-1-john@metanate.com
2021-12-07irqchip/apple-aic: Mark aic_init_smp() as __initDonghyeok Kim
This function is only called from the driver init code. Signed-off-by: Donghyeok Kim <dthex5d@gmail.com> Acked-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211204164228.5920-1-dthex5d@gmail.com
2021-12-07drm/i915/ddi: add use_edp_hobl() and use_edp_low_vswing() helpersJani Nikula
Localize HOBL and low vswing VBT lookups to a couple of small helpers, and get rid of a bunch of local variables. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211203131318.2885969-1-jani.nikula@intel.com
2021-12-07can: m_can: pci: use custom bit timings for Elkhart LakeMatthias Schiffer
The relevant datasheet [1] specifies nonstandard limits for the bit timing parameters. While it is unclear what the exact effect of violating these limits is, it seems like a good idea to adhere to the documentation. [1] Intel Atom® x6000E Series, and Intel® Pentium® and Celeron® N and J Series Processors for IoT Applications Datasheet, Volume 2 (Book 3 of 3), July 2021, Revision 001 Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/9eba5d7c05a48ead4024ffa6e5926f191d8c6b38.1636967198.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07can: m_can: make custom bittiming fields constMatthias Schiffer
The assigned timing structs will be defined a const anyway, so we can avoid a few casts by declaring the struct fields as const as well. Link: https://lore.kernel.org/all/4508fa4e639164b2584c49a065d90c78a91fa568.1636967198.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07Revert "can: m_can: remove support for custom bit timing"Matthias Schiffer
The timing limits specified by the Elkhart Lake CPU datasheets do not match the defaults. Let's reintroduce the support for custom bit timings. This reverts commit 0ddd83fbebbc5537f9d180d31f659db3564be708. Link: https://lore.kernel.org/all/00c9e2596b1a548906921a574d4ef7a03c0dace0.1636967198.git.matthias.schiffer@ew.tq-group.com Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07can: m_can: pci: fix incorrect reference clock rateMatthias Schiffer
When testing the CAN controller on our Ekhart Lake hardware, we determined that all communication was running with twice the configured bitrate. Changing the reference clock rate from 100MHz to 200MHz fixed this. Intel's support has confirmed to us that 200MHz is indeed the correct clock rate. Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Link: https://lore.kernel.org/all/c9cf3995f45c363e432b3ae8eb1275e54f009fc8.1636967198.git.matthias.schiffer@ew.tq-group.com Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo()Matthias Schiffer
The same fix that was previously done in m_can_platform in commit 99d173fbe894 ("can: m_can: fix iomap_read_fifo() and iomap_write_fifo()") is required in m_can_pci as well to make iomap_read_fifo() and iomap_write_fifo() work for val_count > 1. Fixes: 812270e5445b ("can: m_can: Batch FIFO writes during CAN transmit") Fixes: 1aa6772f64b4 ("can: m_can: Batch FIFO reads during CAN receive") Link: https://lore.kernel.org/all/20211118144011.10921-1-matthias.schiffer@ew.tq-group.com Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07drm/i915/snps: use div32 version of MPLLB word clock for UHBRJani Nikula
The mode set sequence for 128b/132b requires setting the div32 version of MPLLB clock. Bspec: 53880, 54128 Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211202144456.2541305-1-jani.nikula@intel.com
2021-12-07can: m_can: m_can_read_fifo: fix memory leak in error branchVincent Mailhol
In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/20211107050755.70655-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Cc: Matt Kline <matt@bitbashing.io> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07can: m_can: Disable and ignore ELO interruptBrian Silverman
With the design of this driver, this condition is often triggered. However, the counter that this interrupt indicates an overflow is never read either, so overflowing is harmless. On my system, when a CAN bus starts flapping up and down, this locks up the whole system with lots of interrupts and printks. Specifically, this interrupt indicates the CEL field of ECR has overflowed. All reads of ECR mask out CEL. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/all/20211129222628.7490-1-brian.silverman@bluerivertech.com Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07can: sja1000: fix use after free in ems_pcmcia_add_card()Dan Carpenter
If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card") Link: https://lore.kernel.org/all/20211124145041.GB13656@kili Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07can: pch_can: pch_can_rx_normal: fix use after freeVincent Mailhol
After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. Fixes: b21d18b51b31 ("can: Topcliff: Add PCH_CAN driver.") Link: https://lore.kernel.org/all/20211123111654.621610-1-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-07ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platformKailang Yang
Lenovo ALC897 platform had headset Mic. This patch enable supported headset Mic. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/baab2c2536cb4cc18677a862c6f6d840@realtek.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-12-07drm/i915/xelpd: Add Pipe Color Lut caps to platform configUma Shankar
XE_LPD has 128 Lut entries for Degamma, with additional 3 entries for extended range. It has 511 entries for gamma with additional 2 entries for extended range. v2: Updated lut size for 10bit gamma, added lut_tests (Ville) v3: Dropped the gamma lut tests fields (Ville) Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-4-uma.shankar@intel.com
2021-12-07drm/i915/xelpd: Enable Pipe DegammaUma Shankar
Enable Pipe Degamma for XE_LPD. Extend the legacy implementation to incorparate the extended lut size for XE_LPD. v2: Added a helper for degamma lut size (Ville) Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-3-uma.shankar@intel.com
2021-12-07drm/i915/xelpd: Enable Pipe color support for D13 platformUma Shankar
Enable pipe color support for Display 13 platforms. Currently limit to just 10bit gamma and later extend it for logarithmic gamma, once the new UAPI is agreed by community and implemented by a userspace consumer. v2: Updated dev_priv to i915 (Ville) Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-2-uma.shankar@intel.com
2021-12-06drm/i915/dmc: Change max DMC FW size on ADL-PMadhumitha Tolakanahalli Pradeep
Increase the max size of DMC on ADL-P to account for support of new features in the current/upcoming DMC versions. Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211207023718.322349-1-madhumitha.tolakanahalli.pradeep@intel.com
2021-12-06drm/i915: Introduce new macros for i915 PTEMichael Cheng
Certain functions within i915 uses macros that are defined for specific architectures by the mmu, such as _PAGE_RW and _PAGE_PRESENT (Some architectures don't even have these macros defined, like ARM64). Instead of re-using bits defined for the CPU, we should use bits defined for i915. This patch introduces two new 64 bit macros, GEN8_PAGE_PRESENT and GEN8_PAGE_RW, to check for bits 0 and 1 and, to replace all occurrences of _PAGE_RW and _PAGE_PRESENT within i915. v2(Michael Cheng): Use GEN8_ instead of I915_ Signed-off-by: Michael Cheng <michael.cheng@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> [ Move defines together with other GEN8 defines ] Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211206215245.513677-2-michael.cheng@intel.com
2021-12-06scsi: qla2xxx: Format log strings only if neededRoman Bolshakov
Commit 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs") introduced unconditional log string formatting to ql_dbg() even if ql_dbg_log event is disabled. It harms performance because some strings are formatted in fastpath and/or interrupt context. Link: https://lore.kernel.org/r/20211112145446.51210-1-r.bolshakov@yadro.com Fixes: 598a90f2002c ("scsi: qla2xxx: add ring buffer for tracing debug logs") Cc: Rajan Shanmugavelu <rajan.shanmugavelu@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: scsi_debug: Fix buffer size of REPORT ZONES commandShin'ichiro Kawasaki
According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH field of REPORT ZONES command is byte. However, current scsi_debug implementation handles it as number of zones to calculate buffer size to report zones. When the ALLOCATION LENGTH has a large number, this results in too large buffer size and causes memory allocation failure. Fix the failure by handling ALLOCATION LENGTH as byte unit. Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands") Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issueManish Rangankar
When issued LUN reset under heavy I/O we hit the qedi WARN_ON because of a mismatch in firmware I/O cmd cleanup request count and I/O cmd cleanup response count received. The mismatch is because of a race caused by the postfix increment of cmd_cleanup_cmpl. [qedi_clearsq:1295]:18: fatal error, need hard reset, cid=0x0 WARNING: CPU: 48 PID: 110963 at drivers/scsi/qedi/qedi_fw.c:1296 qedi_clearsq+0xa5/0xd0 [qedi] CPU: 48 PID: 110963 Comm: kworker/u130:0 Kdump: loaded Tainted: G W Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 04/15/2020 Workqueue: iscsi_conn_cleanup iscsi_cleanup_conn_work_fn [scsi_transport_iscsi] RIP: 0010:qedi_clearsq+0xa5/0xd0 [qedi] RSP: 0018:ffffac2162c7fd98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff975213c40ab8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9761bf816858 RDI: ffff9761bf816858 RBP: ffff975247018628 R08: 000000000000522c R09: 000000000000005b R10: 0000000000000000 R11: ffffac2162c7fbd8 R12: ffff97522e1b2be8 R13: 0000000000000000 R14: ffff97522e1b2800 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9761bf800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1a34e3e1a0 CR3: 0000000108bb2000 CR4: 0000000000350ee0 Call Trace: qedi_ep_disconnect+0x533/0x550 [qedi] ? iscsi_dbg_trace+0x63/0x80 [scsi_transport_iscsi] ? _cond_resched+0x15/0x30 ? iscsi_suspend_queue+0x19/0x40 [libiscsi] iscsi_ep_disconnect+0xb0/0x130 [scsi_transport_iscsi] iscsi_cleanup_conn_work_fn+0x82/0x130 [scsi_transport_iscsi] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 ---[ end trace 5f1441f59082235c ]--- Link: https://lore.kernel.org/r/20211203095218.5477-1-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06perf bpf_skel: Do not use typedef to avoid error on old clangSong Liu
When building bpf_skel with clang-10, typedef causes confusions like: libbpf: map 'prev_readings': unexpected def kind var. Fix this by removing the typedef. Fixes: 7fac83aaf2eecc9e ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/BEF5C312-4331-4A60-AEC0-AD7617CB2BC4@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06perf bpf: Fix building perf with BUILD_BPF_SKEL=1 by default in more distrosSong Liu
Arnaldo reported that building all his containers with BUILD_BPF_SKEL=1 to then make this the default he found problems in some distros where the system linux/bpf.h file was being used and lacked this: util/bpf_skel/bperf_leader.bpf.c:13:20: error: use of undeclared identifier 'BPF_F_PRESERVE_ELEMS' __uint(map_flags, BPF_F_PRESERVE_ELEMS); So use instead the vmlinux.h file generated by bpftool from BTF info. This fixed these as well, getting the build back working on debian:11, debian:experimental and ubuntu:21.10: In file included from In file included from util/bpf_skel/bperf_leader.bpf.cutil/bpf_skel/bpf_prog_profiler.bpf.c::33: : In file included from In file included from /usr/include/linux/bpf.h/usr/include/linux/bpf.h::1111: : /usr/include/linux/types.h/usr/include/linux/types.h::55::1010:: In file included from util/bpf_skel/bperf_follower.bpf.c:3fatal errorfatal error: : : In file included from /usr/include/linux/bpf.h:'asm/types.h' file not found11'asm/types.h' file not found: /usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found #include <asm/types.h>#include <asm/types.h> ^~~~~~~~~~~~~ ^~~~~~~~~~~~~ #include <asm/types.h> ^~~~~~~~~~~~~ 1 error generated. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Song Liu <song@kernel.org> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/CF175681-8101-43D1-ABDB-449E644BE986@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06perf header: Fix memory leaks when processing feature headersIan Rogers
These leaks were found with leak sanitizer running "perf pipe recording and injection test". In pipe mode feat_fd may hold onto an events struct that needs freeing. When string features are processed they may overwrite an already created string, so free this before the overwrite. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20211118201730.2302927-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06perf test: Reset shadow counts before loadingIan Rogers
Otherwise load counting is an average. Without this change duration_time in test_memory_bandwidth will alter its value if an earlier test contains duration_time. This patch fixes an issue that's introduced in the proposed patch: https://lore.kernel.org/lkml/20211124015226.3317994-1-irogers@google.com/ in perf test "Parse and process metrics". Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20211128085810.4027314-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06perf test: Fix 'Simple expression parser' test on arch without CPU die ↵Thomas Richter
topology info Some platforms do not have CPU die support, for example s390. Commit Cc: Ian Rogers <irogers@google.com> Fixes: fdf1e29b6118c18f ("perf expr: Add metric literals for topology.") fails on s390: # perf test -Fv 7 ... # FAILED tests/expr.c:173 #num_dies >= #num_packages ---- end ---- Simple expression parser: FAILED! # Investigating this issue leads to these functions: build_cpu_topology() +--> has_die_topology(void) { struct utsname uts; if (uname(&uts) < 0) return false; if (strncmp(uts.machine, "x86_64", 6)) return false; .... } which always returns false on s390. The caller build_cpu_topology() checks has_die_topology() return value. On false the the struct cpu_topology::die_cpu_list is not contructed and has zero entries. This leads to the failing comparison: #num_dies >= #num_packages. s390 of course has a positive number of packages. Fix this and check if the function build_cpu_topology() did build up a die_cpus_list. The number of entries in this list should be larger than 0. If the number of list element is zero, the die_cpus_list has not been created and the check in function test__expr(): TEST_ASSERT_VAL("#num_dies >= #num_packages", \ num_dies >= num_packages) always fails. Output after: # perf test -Fv 7 7: Simple expression parser : --- start --- division by zero syntax error ---- end ---- Simple expression parser: Ok # Fixes: fdf1e29b6118c18f ("perf expr: Add metric literals for topology.") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20211129112339.3003036-1-tmricht@linux.ibm.com [ Added comment in the added 'if (num_dies)' line about architectures not having die topology ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06tools build: Remove needless libpython-version feature check that breaks ↵Arnaldo Carvalho de Melo
test-all fast path Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use the tools/build/feature/test-libpython-version.c version in any Makefile feature check: $ find tools/ -type f | xargs grep feature-libpython-version $ The only place where this was used was removed in 66dfdff03d196e51: - ifneq ($(feature-libpython-version), 1) - $(warning Python 3 is not yet supported; please set) - $(warning PYTHON and/or PYTHON_CONFIG appropriately.) - $(warning If you also have Python 2 installed, then) - $(warning try something like:) - $(warning $(and ,)) - $(warning $(and ,) make PYTHON=python2) - $(warning $(and ,)) - $(warning Otherwise, disable Python support entirely:) - $(warning $(and ,)) - $(warning $(and ,) make NO_LIBPYTHON=1) - $(warning $(and ,)) - $(error $(and ,)) - else - LDFLAGS += $(PYTHON_EMBED_LDFLAGS) - EXTLIBS += $(PYTHON_EMBED_LIBADD) - LANG_BINDINGS += $(obj-perf)python/perf.so - $(call detected,CONFIG_LIBPYTHON) - endif And nowadays we either build with PYTHON=python3 or just install the python3 devel packages and perf will build against it. But the leftover feature-libpython-version check made the fast path feature detection to break in all cases except when python2 devel files were installed: $ rpm -qa | grep python.*devel python3-devel-3.9.7-1.fc34.x86_64 $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000) $ As python3 is the norm these days, fix this by just removing the unused feature-libpython-version feature check, making the test-all fast path to work with the common case. With this: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ make -C tools/perf O=/tmp/build/perf install-bin |& head make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j32' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] $ ldd ~/bin/perf | grep python libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000) $ cat /tmp/build/perf/feature/test-all.make.output $ Reviewed-by: James Clark <james.clark@arm.com> Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06perf tools: Fix SMT detection fast read pathIan Rogers
sysfs__read_int() returns 0 on success, and so the fast read path was always failing. Fixes: bb629484d924118e ("perf tools: Simplify checking if SMT is active.") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20211124001231.3277836-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06tools headers UAPI: Sync powerpc syscall table file changed by new ↵Arnaldo Carvalho de Melo
futex_waitv syscall To pick the changes in this cset: a0eb2da92b715d0c ("futex: Wireup futex_waitv syscall") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible (adapted from the x86_64 test output): # perf trace -e futex_waitv ^C# # perf trace -v -e futex_waitv event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449) ^C# # perf trace -v -e futex* --max-events 10 event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 221 || id == 449) mmap size 528384B ? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out) 0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0 0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... 0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0 0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... # That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep futex tools/perf/arch/powerpc/entry/syscalls/syscall.tbl 221 32 futex sys_futex_time32 221 64 futex sys_futex 221 spu futex sys_futex 422 32 futex_time64 sys_futex sys_futex 449 common futex_waitv sys_futex_waitv $ This addresses this perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com>, Cc: André Almeida <andrealmeid@collabora.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YZ%2F1OU9mJuyS2HMa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06perf inject: Fix itrace space allowed for new attributesAdrian Hunter
The space allowed for new attributes can be too small if existing header information is large. That can happen, for example, if there are very many CPUs, due to having an event ID per CPU per event being stored in the header information. Fix by adding the existing header.data_offset. Also increase the extra space allowed to 8KiB and align to a 4KiB boundary for neatness. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20211125071457.2066863-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-06tools headers UAPI: Sync s390 syscall table file changed by new futex_waitv ↵Arnaldo Carvalho de Melo
syscall To pick the changes in these csets: 6c122360cf2f4c5a ("s390: wire up sys_futex_waitv system call") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible (adapted from the x86_64 test output): # perf trace -e futex_waitv ^C# # perf trace -v -e futex_waitv event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449) ^C# # perf trace -v -e futex* --max-events 10 event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 238 || id == 449) ? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out) 0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0 0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... 0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0 0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... # That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep futex tools/perf/arch/s390/entry/syscalls/syscall.tbl 238 common futex sys_futex sys_futex_time32 422 32 futex_time64 - sys_futex 449 common futex_waitv sys_futex_waitv sys_futex_waitv $ This addresses this perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com>, Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/lkml/YZ%2F2qRW%2FTScYTP1U@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 00:17:17 +0000