| Age | Commit message (Collapse) | Author |
|---|
|
Commit 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly' caused
the MacBook firmware to expose the SBS, resulting in intermittent
hangs of several minutes on boot, and failure to detect or report
the battery. Fix this by adding a 5 us delay to the start of each
SMBUS transaction. This timing is the result of experimentation -
hangs were observed with 3 us but never with 5 us.
Fixes: 7bc5a2bad0b8 'ACPI: Support _OSI("Darwin") correctly'
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94651
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Cc: 3.18+ <stable@vger.kernel.org> # 3.18+
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"One nice fix is Peter's patch to make the old good SB Audigy PCI to
work with 32bit DMA instead of 31bit. This allows the MIDI synth
running on modern machines again. Along with it, a few fixes for
emu10k1 have merged.
In ASoC side, there is one fix in the common code, but it's just
trivial additions of static inline functions for CONFIG_PM=n. The
rest are various device-specific small fixes.
Last but not least, a few HD-audio fixes are included, as usual, too"
* tag 'sound-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ASoC: rt5677: fixed wrong DMIC ref clock
ALSA: emu10k1: Emu10k2 32 bit DMA mode
ALSA: emux: Fix mutex deadlock in OSS emulation
ASoC: Update email-id of Rajeev Kumar
ASoC: rt5645: Fix mask for setting RT5645_DMIC_2_DP_GPIO12 bit
ALSA: hda - Fix missing va_end() call in snd_hda_codec_pcm_new()
ALSA: emux: Fix mutex deadlock at unloading
ALSA: emu10k1: Fix card shortname string buffer overflow
ALSA: hda - Add mute-LED mode control to Thinkpad
ALSA: hda - Fix mute-LED fixed mode
ALSA: hda - Fix click noise at start on Dell XPS13
ASoC: rt5645: Add ACPI match ID
ASoC: rt5677: add register patch for PLL
ASoC: Intel: fix the makefile for atom code
ASoC: dapm: Enable autodisable on SOC_DAPM_SINGLE_TLV_AUTODISABLE
ASoC: add static inline funcs to fix a compiling issue
ASoC: Intel: sst_byt: remove kfree for memory allocated with devm_kzalloc
ASoC: samsung: s3c24xx-i2s: Fix return value check in s3c24xx_iis_dev_probe()
ASoC: tfa9879: Fix return value check in tfa9879_i2c_probe()
ASoC: fsl_ssi: Fix platform_get_irq() error handling
...
|
|
As the interrupt handling was transferred to the pxa_cplds driver,
make the switch in lubbock platform code.
Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
As the interrupt handling was transferred to the pxa_cplds driver,
make the switch in mainstone platform code.
Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Historically, this support was in arch/arm/mach-pxa/lubbock.c and
arch/arm/mach-pxa/mainstone.c. When gpio-pxa was moved to drivers/pxa,
it became a driver, and its initialization and probing happened at
postcore initcall. The lubbock code used to install the chained lubbock
interrupt handler at init_irq() time.
The consequence of the gpio-pxa change is that the installed chained irq
handler lubbock_irq_handler() was overwritten in pxa_gpio_probe(_dt)(),
removing :
- the handler
- the falling edge detection setting of GPIO0, which revealed the
interrupt request from the lubbock IO board.
As a fix, move the gpio0 chained handler setup to a place where we have
the guarantee that pxa_gpio_probe() was called before, so that lubbock
handler becomes the true IRQ chained handler of GPIO0, demuxing the
lubbock IO board interrupts.
This patch moves all that handling to a mfd driver. It's only purpose
for the time being is the interrupt handling, but in the future it
should encompass all the motherboard CPLDs handling :
- leds
- switches
- hexleds
The same logic applies to mainstone board.
Fixes: 157d2644cb0c ("ARM: pxa: change gpio to platform device")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
RGMII-ID uses an internal delay within the transmitter or receiver. This
feature is phy specific. The rest of the communication is normal RGMII.
So the fec driver has to check for all RGMII modes, not only
'PHY_INTERFACE_MODE_RGMII'.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When system is out of memory, refilling of RX buffers fails while
the driver continue to pass the received packets to the kernel stack.
At some point, when all RX buffers deplete, driver may fall into a
sleep, and not recover when memory for new RX buffers is once again
availible. This is because hardware does not have valid descriptors,
so no interrupt will be generated for the driver to return to work
in napi context. Fix it by schedule the napi poll function from
stats_task delayed workqueue, as long as the allocations fail.
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK
enabled did not produce any traces, it would be more prudent in the
case of tx_clean_lock to use spin_[un]lock_bh, since this lock is
manipulated in both the process and softirq contexts.
This patch was tested for functionality and regressions with netperf
and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Addresses the following kernel logs seen during boot:
Kernel unaligned access at TPC[100ee150] mlx4_QUERY_HCA+0x80/0x248 [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Kernel unaligned access at TPC[100f071c] mlx4_QUERY_ADAPTER+0x100/0x12c [mlx4_core]
Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Fixes: 9e311e7 ("net/mlx4_en: Use affinity hint")
Acked-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An IO port or MMIO resource assigned to a PCI host bridge may be
consumed by the host bridge itself or available to its child
bus/devices. The ACPI specification defines a bit (Producer/Consumer)
to tell whether the resource is consumed by the host bridge itself,
but firmware hasn't used that bit consistently, so we can't rely on it.
Before commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource
interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored
all IO port resources defined by acpi_resource_io and
acpi_resource_fixed_io to filter out IO ports consumed by the host
bridge itself.
Commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces
to simplify implementation") started accepting all IO port and MMIO
resources, which caused a regression that IO port resources consumed
by the host bridge itself became available to its child devices.
Then commit 63f1789ec716 ("x86/PCI/ACPI: Ignore resources consumed by
host bridge itself") ignored resources consumed by the host bridge
itself by checking the IORESOURCE_WINDOW flag, which accidently removed
MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32
and acpi_resource_fixed_memory32.
On x86 and IA64 platforms, all IO port and MMIO resources are assumed
to be available to child bus/devices except one special case:
IO port [0xCF8-0xCFF] is consumed by the host bridge itself
to access PCI configuration space.
So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution
will also ease the way to consolidate ACPI PCI host bridge common code
from x86, ia64 and ARM64.
Related ACPI table are archived at:
https://bugzilla.kernel.org/show_bug.cgi?id=94221
Related discussions at:
http://patchwork.ozlabs.org/patch/461633/
https://lkml.org/lkml/2015/3/29/304
Fixes: 63f1789ec716 (Ignore resources consumed by host bridge itself)
Reported-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
drivers/media/pci/mantis/mantis_cards.c:229 mantis_pci_probe() info: ignoring unreachable code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/tuners/qt1010.c:357 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
This should not happen with the current code, as the i2c_data array
doesn't end with a QT1010_M1, but it doesn't hurt add a BUG_ON
to notify if one modifies it and breaks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/platform/vivid/vivid-radio-rx.c:198 vivid_radio_rx_s_hw_freq_seek() error: buffer overflow 'vivid_radio_bands' 3 <= 3
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/usb/gspca/zc3xx.c:5994 transfer_update() info: ignoring unreachable code.
That happens because there's a return that it is never called,
as the work queue runs an infinite loop, except when the device is
put to sleep or an error happens.
When an error happens, a break statement is enough to go out of
the loop. So, let's remove the goto, as break is the typical
instruction used to end a loop.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/usb/gspca/zc3xx.c:6363 zcxx_s_ctrl() error: buffer overflow 'jpeg_qual' 3 <= 3
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
If userspace sends an invalid bandwidth, it should either return
EINVAL or switch to auto mode.
This driver will go past an array and program the hardware on a
wrong way if this happens.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.1
A few fixes for v4.1, none earth shattering and mostly driver related
except for one change to fix !PM builds for Intel platforms which is
done by adding stubs in the core so other platforms don't run into the
same issue.
|
|
The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up to 7 values:
drivers/media/dvb-frontends/s5h1420.c:193 s5h1420_send_master_cmd() error: buffer overflow 'cmd->msg' 6 <= 7
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/dvb-frontends/stv0288.c:137 stv0288_set_symbolrate() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/dvb-frontends/lgdt3306a.c:2104 lgdt3306a_DumpRegs() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/dvb-frontends/dib3000mc.c:134 dib3000mc_setup_pwm_state() warn: inconsistent indenting
drivers/media/dvb-frontends/dib3000mc.c:144 dib3000mc_setup_pwm_state() warn: inconsistent indenting
drivers/media/dvb-frontends/dib3000mc.c:420 dib3000mc_sleep() warn: inconsistent indenting
drivers/media/dvb-frontends/dib3000mc.c:453 dib3000mc_set_channel_cfg() warn: inconsistent indenting
The last one is actually due to a commented code. Let's rework
it, in order to remove the sparse warning without removing the
dead code, as it may be useful in the future.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/dvb-frontends/bcm3510.c:688 bcm3510_reset() warn: inconsistent indenting
drivers/media/dvb-frontends/bcm3510.c:711 bcm3510_clear_reset() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Pull kvm changes from Paolo Bonzini:
"Remove from guest code the handling of task migration during a pvclock
read; instead use the correct protocol in KVM.
This removes the need for task migration notifiers in core scheduler
code"
[ The scheduler people really hated the migration notifiers, so this was
kind of required - Linus ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86: pvclock: Really remove the sched notifier for cross-cpu migrations
kvm: x86: fix kvmclock update protocol
|
|
drivers/media/usb/gspca/benq.c:239 sd_isoc_irq() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/usb/go7007/go7007-driver.c:452 frame_boundary() warn: variable dereferenced before check 'vb' (see line 449)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Using static const allows the compiler to optimize the code.
Before static const:
text data bss dec hex filename
4982 524 1568 7074 1ba2 drivers/media/tuners/qt1010.o
After static const:
text data bss dec hex filename
4714 524 1568 6806 1a96 drivers/media/tuners/qt1010.o
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The streg_cbdata can have a negative error value. So, it should be
an integer, and not u8, as reported by smatch:
drivers/media/radio/wl128x/fmdrv_common.c:1517 fmc_prepare() warn: assigning (-115) to unsigned variable 'fmdev->streg_cbdata'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper bugfixes from Mike Snitzer:
"Fix two bugs in the request-based DM blk-mq support that was added
during the 4.1 merge"
* tag 'dm-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix free_rq_clone() NULL pointer when requeueing unmapped request
dm: only initialize the request_queue once
|
|
There are some false-positive warnings produced by smatch:
drivers/media/rc/ir-sony-decoder.c:129 ir_sony_decode() warn: missing break? reassigning 'data->state'
drivers/media/rc/ir-sony-decoder.c:137 ir_sony_decode() warn: missing break? reassigning 'data->state'
drivers/media/rc/ir-sony-decoder.c:165 ir_sony_decode() warn: missing break? reassigning 'data->state'
This is due to the logic used there to detect the need of a break.
While those are false positives, it is easy to get rid of them without
any drawbacks. The side effect is a cleaner function, with is good.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/platform/s5p-mfc/s5p_mfc.c:1340 s5p_mfc_runtime_resume() warn: this array is probably non-NULL. 'm_dev->alloc_ctx'
alloc_ctx can never be NULL, as it is embeeded inside the struct
s5p_mfc_dev.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/platform/s3c-camif/camif-capture.c:463 queue_setup() warn: variable dereferenced before check 'fmt' (see line 460)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/pci/zoran/zoran_device.c:1594 zoran_init_hardware() warn: inconsistent indenting
Fix indent. While here, fix CodingStyle and remove dead code, as it
can always be recovered from git logs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/pci/ivtv/ivtv-driver.c:832 ivtv_init_struct2() error: buffer overflow 'itv->card->video_inputs' 6 <= 6
That happens because nof_inputs and nof_audio_inputs can be initialized
as IVTV_CARD_MAX_VIDEO_INPUTS, instead of IVTV_CARD_MAX_VIDEO_INPUTS - 1.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Change default key details to be more obviously unspecified.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As reported by smatch:
drivers/media/radio/radio-si476x.c:571 si476x_radio_do_post_powerup_init() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/i2c/saa717x.c:155 saa717x_read() warn: mask and shift to zero
drivers/media/i2c/saa717x.c:155 saa717x_read() warn: mask and shift to zero
This is done right at saa717x_write(), but the read function is
broken. Thankfully, there's just one place at saa717x driver that
uses multibyte read (for status report, via printk).
Yet, let's fix it. From saa717x_write(), it is clear that the
bytes are in little endian:
mm1[4] = (value >> 16) & 0xff;
mm1[3] = (value >> 8) & 0xff;
mm1[2] = value & 0xff;
So, the same order should be valid for read too.
Compile-tested only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/pci/saa7164/saa7164-core.c:631 saa7164_irq() warn: variable dereferenced before check 'dev' (see line 621)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/pci/ngene/ngene-core.c:1529 init_channel() error: we previously assumed 'chan->fe' could be null (see line 1521)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 4.1-rc2.
They include some minor fixes that resolve reported issues, and a new
device quirk.
All have been in linux-next succesfully"
* tag 'tty-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Add support for 16 port Exar boards
serial: samsung: fix serial console break
tty/serial: at91: maxburst was missing for dma transfers
serial: of-serial: Remove device_type = "serial" registration
serial: xilinx: Use platform_get_irq to get irq description structure
serial: core: Fix kernel-doc build warnings
tty: Re-add external interface for tty_set_termios()
|
|
As reported by smatch:
drivers/media/pci/saa7134/saa7134-cards.c:7197 saa7134_xc2028_callback() warn: inconsistent indenting
drivers/media/pci/saa7134/saa7134-cards.c:7846 saa7134_board_init2() warn: inconsistent indenting
drivers/media/pci/saa7134/saa7134-cards.c:7913 saa7134_board_init2() warn: inconsistent indenting
While here, fix a few CodingStyle issues on the affected code
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As reported by smatch:
drivers/media/pci/cx18/cx18-driver.c:807 cx18_init_struct2() error: buffer overflow 'cx->card->video_inputs' 6 <= 6
That happens because nof_inputs and nof_audio_inputs can be initialized
as CX18_CARD_MAX_VIDEO_INPUTS, instead of CX18_CARD_MAX_VIDEO_INPUTS - 1.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/rc/rc-main.c:749 rc_close() warn: inconsistent indenting
There's an extra space there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_subdev_input_index':
drivers/media/platform/am437x/am437x-vpfe.c:1679:27: warning: variable 'sdinfo' set but not used [-Wunused-but-set-variable]
struct vpfe_subdev_info *sdinfo;
^
Cc: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/platform/am437x/am437x-vpfe.c:513 vpfe_ccdc_set_params() warn: inconsistent indenting
Cc: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_ccdc_update_raw_params':
drivers/media/platform/am437x/am437x-vpfe.c:430:38: warning: variable 'config_params' set but not used [-Wunused-but-set-variable]
struct vpfe_ccdc_config_params_raw *config_params =
^
vpfe_ccdc_update_raw_params() is supposed to update the raw
params at ccdc. However, it is just creating a local var and changing
it.
Compile-tested only.
Cc: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.2-rc2. They revert one
problem patch, fix some minor things, and add some new quirks for
"broken" devices.
All have been in linux-next successfully"
* tag 'usb-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
cdc-acm: prevent infinite loop when parsing CDC headers.
Revert "usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap"
usb: chipidea: otg: remove mutex unlock and lock while stop and start role
uas: Set max_sectors_240 quirk for ASM1053 devices
uas: Add US_FL_MAX_SECTORS_240 flag
uas: Allow uas_use_uas_driver to return usb-storage flags
|
