| Age | Commit message (Collapse) | Author |
|---|
|
Replace platform_profile_register() with it's device managed version.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250116002721.75592-13-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Remove the unnecessary if check and return the result directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250114202502.912690-1-thorsten.blum@linux.dev
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20250115090344.918290-2-thorsten.blum@linux.dev
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last, which is beneficial
to cultivate a high-quality code.[2]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20241218074439.3271397-1-zhangkunbo@huawei.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
Performance improvement for reading /proc/interrupts on arch sparc
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20241108161123.9637-1-00107082@163.com
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
|
|
of_parse_phandle_with_args_map() defines array @dummy_mask and @dummy_pass
these two arrays only need @MAX_PHANDLE_ARGS elements separately, but they
actually have (@MAX_PHANDLE_ARGS + 1) elements, One extra element doesn't
hurt anything except for some stack usage.
Fix by using (@MAX_PHANDLE_ARGS - 1) as max element index in initializer.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250114-of_core_fix-v5-3-b8bafd00a86f@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
For child node of /reserved-memory, its property 'reg' may contain
multiple regions, but fdt_scan_reserved_mem_reg_nodes() only takes
into account the first region, and miss remaining regions.
But there are no simple approach to fix it, so give user warning
message when miss remaining regions.
Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20250114-of_core_fix-v5-2-b8bafd00a86f@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
of_alias_scan() has no external callers and returns void.
Do not expose it and delete return value descriptions in its comments.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250114-of_core_fix-v5-1-b8bafd00a86f@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Sync if_xdp.h uapi header to remove following warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'
Fixes: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
Signed-off-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250115032248.125742-1-yoong.siang.song@intel.com
|
|
GCC is not happy about the buffer size:
drivers/usb/core/hcd.c:441:48: error: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size between 35 and 99 [-Werror=format-truncation=]
441 | snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
| ^~
442 | init_utsname()->release, hcd->driver->description);
| ~~~~~~~~~~~~~~~~~~~~~~~
Bump the size to get it enough for the possible strings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250116160543.216913-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some versions of kernel were stripping out '.llvm.<hash>' suffix from
kerne symbols (produced by Clang LTO compilation) from function names
reported in available_filter_functions, while kallsyms reported full
original name. This confuses libbpf's multi-kprobe logic of finding all
matching kernel functions for specified user glob pattern by joining
available_filter_functions and kallsyms contents, because joining by
full symbol name won't work for symbols containing '.llvm.<hash>' suffix.
This was eventually fixed by [0] in the kernel, but we'd like to not
regress multi-kprobe experience and add a work around for this bug on
libbpf side, stripping kallsym's name if it matches user pattern and
contains '.llvm.' suffix.
[0] fb6a421fb615 ("kallsyms: Match symbols exactly with CONFIG_LTO_CLANG")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250117003957.179331-1-andrii@kernel.org
|
|
* for-next/perf: (29 commits)
perf docs: arm_spe: Document new discard mode
perf: arm_spe: Add format option for discard mode
MAINTAINERS: Add perf list for drivers/perf/
drivers/perf: apple_m1: Map generic branch events
drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
perf: imx9_perf: Introduce AXI filter version to refactor the driver and better extension
perf/arm-cmn: Permit more exhaustive groups
perf/dwc_pcie: Qualify RAS DES VSEC Capability by Vendor, Revision
drivers/perf: hisi: Delete redundant blank line of DDRC PMU
drivers/perf: hisi: Fix incorrect variable name "hha_pmu" in DDRC PMU driver
drivers/perf: hisi: Export associated CPUs of each PMU through sysfs
drivers/perf: hisi: Provide a generic implementation of cpumask/identifier
drivers/perf: hisi: Add a common function to retrieve topology from firmware
drivers/perf: hisi: Extract topology information to a separate structure
drivers/perf: hisi: Refactor the detection of associated CPUs
drivers/perf: hisi: Migrate to one online CPU if no associated one online
drivers/perf: hisi: Don't update the associated_cpus on CPU offline
drivers/perf: hisi: Define a symbol namespace for HiSilicon Uncore PMUs
perf/marvell: Odyssey LLC-TAD performance monitor support
perf/marvell: Refactor to extract platform data
...
|
|
* for-next/mm:
arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
arm64: Kconfig: force ARM64_PAN=y when enabling TTBR0 sw PAN
arm64/kvm: Avoid invalid physical addresses to signal owner updates
arm64/kvm: Configure HYP TCR.PS/DS based on host stage1
arm64/mm: Override PARange for !LPA2 and use it consistently
arm64/mm: Reduce PA space to 48 bits when LPA2 is not enabled
|
|
* for-next/misc:
arm64: Remove duplicate included header
arm64/Kconfig: Drop EXECMEM dependency from ARCH_WANTS_EXECMEM_LATE
arm64: asm: Fix typo in pgtable.h
arm64/mm: Ensure adequate HUGE_MAX_HSTATE
arm64/mm: Replace open encodings with PXD_TABLE_BIT
arm64/mm: Drop INIT_MM_CONTEXT()
|
|
* for-next/docs:
Documentation: arm64: Remove stale and redundant virtual memory diagrams
docs: arm64: Document EL3 requirements for FEAT_PMUv3
docs: arm64: Document EL3 requirements for cpu debug architecture
|
|
* for-next/cpufeature:
kselftest/arm64: Add 2024 dpISA extensions to hwcap test
KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1
arm64/hwcap: Describe 2024 dpISA extensions to userspace
arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-12
arm64: Filter out SVE hwcaps when FEAT_SVE isn't implemented
arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09
arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09
arm64/sysreg: Get rid of CPACR_ELx SysregFields
arm64/sysreg: Convert *_EL12 accessors to Mapping
arm64/sysreg: Get rid of the TCR2_EL1x SysregFields
arm64/sysreg: Allow a 'Mapping' descriptor for system registers
arm64/cpufeature: Refactor conditional logic in init_cpu_ftr_reg()
arm64: cpufeature: Add HAFT to cpucap_is_possible()
|
|
* for-next/cca:
arm64: rsi: Add automatic arm-cca-guest module loading
|
|
When adding the Device memory controller (DMEM), "select PAGE_COUNTER"
was added to CGROUP_RDMA, presumably instead of CGROUP_DMEM.
While commit e33b51499a0a6bca ("cgroup/dmem: Select PAGE_COUNTER") added
the missing select to CGROUP_DMEM, the bogus select is still there.
Remove it.
Fixes: b168ed458ddecc17 ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Closes: https://lore.kernel.org/CAMuHMdUmPfahsnZwx2iB5yfh8rjjW25LNcnYujNBgcKotUXBNg@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b4d462f038a2f895f30ae759928397c8183f6f7e.1737020925.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Reduce duplicate code by using netlink helpers which return the
soft/hard interface directly. Instead of returning an interface index
which we are typically not interested in.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Merge the slab feature branch for 6.14:
- Move the kfree_rcu() implementation from RCU to SLAB subsystem
(Uladzislau Rezki)
|
|
When ntsync_obj_get_fd() fails, we free the ntsync object but forget to drop the
"file" member.
This was fixed for semaphores in 0e7d523b5f7a23b1dc6ceceb04e31a60e9e3321d, but
that commit did not fix the similar leak for events and mutexes, since they were
part of patches not yet in the mainline kernel. Fix those cases.
Fixes: 5bc2479a3585b "ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX."
Fixes: 4c7404b9c2b57 "ntsync: Introduce NTSYNC_IOC_CREATE_EVENT."
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20250116190717.8923-1-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Daniel Golle says:
====================
net: phy: realtek: fix status when link is down
The .read_status method for RealTek RTL822x PHYs (both C22 and C45) has
multilpe issues which result in reporting bogus link partner advertised
modes as well as speed and duplex while the link is down and no cable
is plugged in.
Example: ethtool after disconnecting a 1000M/Full capable link partner,
now with no wire plugged:
Settings for lan1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
2500baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 1000baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 7
Transceiver: external
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Link detected: no
Fix this by making sure all of the fields populated by
rtl822x_c45_read_status() or rtl822x_read_status() get reset, also in
case the link is down.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear NBase-T link partner advertisement before calling
rtlgen_read_status() to avoid phy_resolve_aneg_linkmode() wrongly
setting speed and duplex.
This fixes bogus 2.5G/5G/10G link partner advertisement and thus
speed and duplex being set by phy_resolve_aneg_linkmode() due to stale
NBase-T lpa.
Fixes: 68d5cd09e891 ("net: phy: realtek: change order of calls in C22 read_status()")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtlgen_decode_physr() which sets master_slave_state isn't called in case
the link is down and other than rtlgen_read_status(),
rtl822x_c45_read_status() doesn't implicitely clear master_slave_state.
Avoid stale master_slave_state by always setting it to
MASTER_SLAVE_STATE_UNKNOWN in rtl822x_c45_read_status() in case the link
is down.
Fixes: 081c9c0265c9 ("net: phy: realtek: read duplex and gbit master from PHYSR register")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only read 1000Base-T link partner advertisement if autonegotiation has
completed and otherwise 1000Base-T link partner advertisement bits.
This fixes bogus 1000Base-T link partner advertisement after link goes
down (eg. by disconnecting the wire).
Fixes: 5cb409b3960e ("net: phy: realtek: clear 1000Base-T link partner advertisement")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
spmi_controller_probe()
spmi_controller_probe() assigns a parent device and an OF node to an
SPMI controller. However, the operations are not needed as they are
already assigned in spmi_controller_alloc(). Thus, remove the duplicated
assignments. An unnecessary OF node reference acquisition is also
dropped by this patch.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250116044907.2947218-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250116235339.300485-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This allows fw_devlink to do proper dependency tracking for SPMI
devices. So, better deferred probe handling, async probing, async
suspend/resume, etc.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20241115230509.1793191-1-saravanak@google.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20250116235339.300485-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm
Microchip AT91 SoC updates for v6.14
This update includes:
- support for the SAMA7D65 SoC
- support for automatic mode in the backup unit power switch, eliminating
the need for software intervention when entering low power mode
- a fix to release a device node reference in the failure path of the
SoC driver initialization
* tag 'at91-soc-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: add new SoC sama7d65
ARM: at91: pm: change BU Power Switch to automatic mode
soc: atmel: fix device_node release in atmel_soc_device_init()
Link: https://lore.kernel.org/r/20250107081424.758980-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In the sh-sci driver, serial ports are mapped to the sci_ports[] array,
with earlycon mapped at index zero.
The uart_add_one_port() function eventually calls __device_attach(),
which, in turn, calls pm_request_idle(). The identified code path is as
follows:
uart_add_one_port() ->
serial_ctrl_register_port() ->
serial_core_register_port() ->
serial_core_port_device_add() ->
serial_base_port_add() ->
device_add() ->
bus_probe_device() ->
device_initial_probe() ->
__device_attach() ->
// ...
if (dev->p->dead) {
// ...
} else if (dev->driver) {
// ...
} else {
// ...
pm_request_idle(dev);
// ...
}
The earlycon device clocks are enabled by the bootloader. However, the
pm_request_idle() call in __device_attach() disables the SCI port clocks
while earlycon is still active.
The earlycon write function, serial_console_write(), calls
sci_poll_put_char() via serial_console_putchar(). If the SCI port clocks
are disabled, writing to earlycon may sometimes cause the SR.TDFE bit to
remain unset indefinitely, causing the while loop in sci_poll_put_char()
to never exit. On single-core SoCs, this can result in the system being
blocked during boot when this issue occurs.
To resolve this, increment the runtime PM usage counter for the earlycon
SCI device before registering the UART port.
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The early_console_setup() function initializes sci_ports[0].port with an
object of type struct uart_port obtained from the struct earlycon_device
passed as an argument to early_console_setup().
Later, during serial port probing, the serial port used as earlycon
(e.g., port A) might be remapped to a different position in the sci_ports[]
array, and a different serial port (e.g., port B) might be assigned to slot
0. For example:
sci_ports[0] = port B
sci_ports[X] = port A
In this scenario, the new port mapped at index zero (port B) retains the
data associated with the earlycon configuration. Consequently, after the
Linux boot process, any access to the serial port now mapped to
sci_ports[0] (port B) will block the original earlycon port (port A).
To address this, introduce an early_console_exit() function to clean up
sci_ports[0] when earlycon is exited.
To prevent the cleanup of sci_ports[0] while the serial device is still
being used by earlycon, introduce the struct sci_port::probing flag and
account for it in early_console_exit().
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
in use
In the sh-sci driver, sci_ports[0] is used by earlycon. If the earlycon is
still active when sci_probe() is called and the new serial port is supposed
to map to sci_ports[0], return -EBUSY to prevent breaking the earlycon.
This situation should occurs in debug scenarios, and users should be
aware of the potential conflict.
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Relocate the runtime PM enable operation to sci_probe_single(). This change
prepares the codebase for upcoming fixes.
While at it, replace the existing logic with a direct call to
devm_pm_runtime_enable() and remove sci_cleanup_single(). The
devm_pm_runtime_enable() function automatically handles disabling runtime
PM during driver removal.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250116182249.3828577-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port_cfg object is used by serial_console_write(), which serves as
the write function for the earlycon device. Marking port_cfg as __initdata
causes it to be freed after kernel initialization, resulting in earlycon
becoming unavailable thereafter. Remove the __initdata macro from port_cfg
to resolve this issue.
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Fixes: 0b0cced19ab15c9e ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support")
Link: https://lore.kernel.org/r/20250116182249.3828577-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kgdb_nmi_poll_knock() has been unused since it was added in 2013 in
commit 0c57dfcc6c1d ("tty/serial: Add kgdb_nmi driver")
Remove it, the static helpers, and module parameters it used.
(The comment explaining why it might be used sounds sensible, but
it's never been wired up, perhaps it's worth doing somewhere?)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250112135759.105541-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
the crash caused by port being null"
This reverts commit 13014969cbf07f18d62ceea40bd8ca8ec9d36cec.
It is reported to cause crashes on Tegra systems, so revert it for now.
Link: https://lore.kernel.org/r/1037c1ad-9230-4181-b9c3-167dbaa47644@nvidia.com
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable <stable@kernel.org>
Cc: Lianqin Hu <hulianqin@vivo.com>
Link: https://lore.kernel.org/r/2025011711-yippee-fever-a737@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Source can drop its output voltage to the minimum of the requested
PPS APDO voltage range when it is in Current Limit Mode. If this voltage
falls within the range of vPpsShutdown, the Source initiates a Hard
Reset and discharges Vbus. However, currently the Sink may disconnect
before the voltage reaches vPpsShutdown, leading to unexpected behavior.
Prevent premature disconnection by setting the Sink's disconnect
threshold to the minimum vPpsShutdown value. Additionally, consider the
voltage drop due to IR drop when calculating the appropriate threshold.
This ensures a robust and reliable interaction between the Source and
Sink during SPR PPS Current Limit Mode operation.
Fixes: 4288debeaa4e ("usb: typec: tcpci: Fix up sink disconnect thresholds for PD")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250114142435.2093857-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit c141ecc3cecd ("of: Warn when of_property_read_bool() is
used on non-boolean properties") was added, the following warning is
observed for the Tegra XHCI driver ...
OF: /bus@0/usb@3610000: Read of boolean property 'power-domains' with
a value.
Previously, of_property_read_bool() was used to determine if a property
was present but has now been replaced by of_property_present(). The
warning is meant to prevent new users but this user existed before the
change was made. Fix this by updating the Tegra XHCI driver to use
of_property_present() function to determine if the 'power-domains'
property is present.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250116153829.477360-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support compatible ID PNP0D15 which declare that the xHCI
controller doesn't support standard debug capability.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20250116125141.25856-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many platforms from Qualcomm(before X elite) still use UCSI v1.0,
part of them hardcoded the version number to dsdt, add this for them.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250113175131.590683-1-mitltlatltl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, DWC3 driver attempts to acquire the USB power supply only
once during the probe. If the USB power supply is not ready at that
time, the driver simply ignores the failure and continues the probe,
leading to permanent non-functioning of the gadget vbus_draw callback.
Address this problem by delaying the dwc3 driver initialization until
the USB power supply is registered.
Fixes: 6f0764b5adea ("usb: dwc3: add a power supply for current control")
Cc: stable <stable@kernel.org>
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250115044548.2701138-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The seqnum field in USBIP protocol is an unsigned value.
So we fix the format specifier from %d to %u to correctly
display the value.
Signed-off-by: Xiong Nandi <xndchn@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241231161539.20192-3-xndchn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The atomic_inc_return function returns an int, while priv->seqnum is an
unsigned long. So we must cast the result to u32 to prevent potential
sign extension and size mismatch issues.
Signed-off-by: Xiong Nandi <xndchn@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241231161539.20192-2-xndchn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Synopsys DWC3 core is found either as a standalone block or
integrated with vendor glue logic. So far the latter has been described
as two separate IP blocks in DeviceTree, but the two parts are not
separate.
In the case where the core is integrated together with vendor glue,
resources such as clock and resets are often customized by the vendor,
such that the standard properties doesn't make sense.
Split the snps,dwc3 binding in a description of the core properties and
the standard "glue" properties, in order to allow vendor bindings to
inherit the core properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250113-dwc3-refactor-v3-1-d1722075df7b@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250114083514.258379-1-quic_yuanjiey@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On a system with multiple active SCMI agents, one agent(other than OSPM/
Linux or bootloader) would request to turn on a shared power domain
before the Linux boots/initialise the genpds. So when the Linux boots
and gets the power state as already ON, it just registers the genpd with
a default ON state.
However, when the driver that needs this shared power domain is probed
genpd sees that the power domain status is ON and never makes any SCMI
call to power it up which is correct. But, since Linux didn't make an
explicit request to turn on the shared power domain, the SCMI platform
firmware will not know if the OSPM agent is actively using it.
Suppose the other agent that requested the shared power domain to be
powered ON requests to power it OFF as it no longer needs it, the SCMI
platform firmware needs to turn it off if there are no active users of
it which in the above scenaro is the case.
As a result of SCMI platform firmware turning off the resource, OSPM/
Linux will crash the moment as it expects the shared power domain to be
powered ON.
Send an explicit request to set the current state when setting up the
genpd power domains so that OSPM registers its vote in the power domain
state with the SCMI platform firmware.
The other option is to not read the state and set the genpds as default
OFF, but it can't handle the scenario on certain platforms where SCMI
platform keeps all the power domains turned ON by default for faster boot
(or any other such variations) and expect the OSPM to turn off the unused
domains if power saving is required.
Link: https://lore.kernel.org/all/Z4aBkezSWOPCXcUh@bogus
Reported-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20250115113931.1181309-1-sudeep.holla@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There is no such thing as TRFCR_ELx in the architecture.
What we have is TRFCR_EL1, for which TRFCR_EL12 is an accessor.
Rename TRFCR_ELx_* to TRFCR_EL1_*, and fix the bit of code using
these names.
Similarly, TRFCR_EL12 is redefined as a mapping to TRFCR_EL1.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/87cygsqgkh.wl-maz@kernel.org
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
|
|
* kvm-arm64/misc-6.14:
: .
: Misc KVM/arm64 changes for 6.14
:
: - Don't expose AArch32 EL0 capability when NV is enabled
:
: - Update documentation to reflect the full gamut of kvm-arm.mode
: behaviours
:
: - Use the hypervisor VA bit width when dumping stacktraces
:
: - Decouple the hypervisor stack size from PAGE_SIZE, at least
: on the surface...
:
: - Make use of str_enabled_disabled() when advertising GICv4.1 support
:
: - Explicitly handle BRBE traps as UNDEFINED
: .
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
Documentation: Update the behaviour of "kvm-arm.mode"
KVM: arm64: nv: Advertise the lack of AArch32 EL0 support
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/nv-resx-fixes-6.14:
: .
: Fixes for NV sysreg accessors. From the cover letter:
:
: "Joey recently reported that some rather basic tests were failing on
: NV, and managed to track it down to critical register fields (such as
: HCR_EL2.E2H) not having their expect value.
:
: Further investigation has outlined a couple of critical issues:
:
: - Evaluating HCR_EL2.E2H must always be done with a sanitising
: accessor, no ifs, no buts. Given that KVM assumes a fixed value for
: this bit, we cannot leave it to the guest to mess with.
:
: - Resetting the sysreg file must result in the RESx bits taking
: effect. Otherwise, we may end-up making the wrong decision (see
: above), and we definitely expose invalid values to the guest. Note
: that because we compute the RESx masks very late in the VM setup, we
: need to apply these masks at that particular point as well.
: [...]"
: .
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
Signed-off-by: Marc Zyngier <maz@kernel.org>
# Conflicts:
# arch/arm64/kvm/nested.c
|
|
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/pkvm-memshare-declutter:
: .
: pKVM memory transition simplifications, courtesy of Quentin Perret.
:
: From the cover letter:
: "Since its early days, pKVM has formalized memory 'transitions' (shares
: and donations) using 'struct pkvm_mem_transition' and bunch of helpers
: to manipulate it. The intention was for all transitions to use this
: machinery to ensure we're checking things consistently. However, as
: development progressed, it became clear that the rigidity of this model
: made it really difficult to use in some use-cases which ended-up
: side-stepping it entirely. That is the case for the
: hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which
: use lower level helpers directly, as well as for several other pKVM
: features that should land upstream in the future (ex: when a guest
: relinquishes a page during ballooning, when annotating a page that is
: being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery
: requires a lot of boilerplate which makes the code hard to read, but
: also adds layers of indirection that no compilers seems to see through,
: hence leading to suboptimal generated code.
:
: Given all the above, this series removes the pkvm_mem_transition
: machinery from mem_protect.c, and converts all its users to use
: __*_{check,set}_page_state_range() low-level helpers directly."
: .
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
