| Age | Commit message (Collapse) | Author |
|---|
|
Add devicetree binding documentation for the Radxa ROCK 3B board.
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627211737.1985549-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Once again, we've broken PASEMI Nemo boards with its incomplete
"interrupt-map" translations. Commit 935df1bd40d4 ("of/irq: Factor out
parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
changed the behavior resulting in the existing work-around not taking
effect. Rework the work-around to just skip parsing "interrupt-map" up
front by using the of_irq_imap_abusers list.
Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86ed8ba2sp.wl-maz@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Fix performance issue for v6.10
These address the performance issues reported by Matt, Namhyung and
Linus. Recently perf changed the processing of the comm string and DSO
using sorted arrays but this caused it to sort the array whenever
adding a new entry.
This caused a performance issue and the fix is to enhance the sorting
by finding the insertion point in the sorted array and to shift
righthand side using memmove()"
* tag 'perf-tools-fixes-for-v6.10-2024-07-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
|
|
Add a test case which replaces an active ingress qdisc while keeping the
miniq in-tact during the transition period to the new clsact qdisc.
# ./vmtest.sh -- ./test_progs -t tc_link
[...]
./test_progs -t tc_link
[ 3.412871] bpf_testmod: loading out-of-tree module taints kernel.
[ 3.413343] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#332 tc_links_after:OK
#333 tc_links_append:OK
#334 tc_links_basic:OK
#335 tc_links_before:OK
#336 tc_links_chain_classic:OK
#337 tc_links_chain_mixed:OK
#338 tc_links_dev_chain0:OK
#339 tc_links_dev_cleanup:OK
#340 tc_links_dev_mixed:OK
#341 tc_links_ingress:OK
#342 tc_links_invalid:OK
#343 tc_links_prepend:OK
#344 tc_links_replace:OK
#345 tc_links_revision:OK
Summary: 14/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240708133130.11609-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported
an issue that the tcx_entry can be released too early leading to a use
after free (UAF) when an active old-style ingress or clsact qdisc with a
shared tc block is later replaced by another ingress or clsact instance.
Essentially, the sequence to trigger the UAF (one example) can be as follows:
1. A network namespace is created
2. An ingress qdisc is created. This allocates a tcx_entry, and
&tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the
same time, a tcf block with index 1 is created.
3. chain0 is attached to the tcf block. chain0 must be connected to
the block linked to the ingress qdisc to later reach the function
tcf_chain0_head_change_cb_del() which triggers the UAF.
4. Create and graft a clsact qdisc. This causes the ingress qdisc
created in step 1 to be removed, thus freeing the previously linked
tcx_entry:
rtnetlink_rcv_msg()
=> tc_modify_qdisc()
=> qdisc_create()
=> clsact_init() [a]
=> qdisc_graft()
=> qdisc_destroy()
=> __qdisc_destroy()
=> ingress_destroy() [b]
=> tcx_entry_free()
=> kfree_rcu() // tcx_entry freed
5. Finally, the network namespace is closed. This registers the
cleanup_net worker, and during the process of releasing the
remaining clsact qdisc, it accesses the tcx_entry that was
already freed in step 4, causing the UAF to occur:
cleanup_net()
=> ops_exit_list()
=> default_device_exit_batch()
=> unregister_netdevice_many()
=> unregister_netdevice_many_notify()
=> dev_shutdown()
=> qdisc_put()
=> clsact_destroy() [c]
=> tcf_block_put_ext()
=> tcf_chain0_head_change_cb_del()
=> tcf_chain_head_change_item()
=> clsact_chain_head_change()
=> mini_qdisc_pair_swap() // UAF
There are also other variants, the gist is to add an ingress (or clsact)
qdisc with a specific shared block, then to replace that qdisc, waiting
for the tcx_entry kfree_rcu() to be executed and subsequently accessing
the current active qdisc's miniq one way or another.
The correct fix is to turn the miniq_active boolean into a counter. What
can be observed, at step 2 above, the counter transitions from 0->1, at
step [a] from 1->2 (in order for the miniq object to remain active during
the replacement), then in [b] from 2->1 and finally [c] 1->0 with the
eventual release. The reference counter in general ranges from [0,2] and
it does not need to be atomic since all access to the counter is protected
by the rtnl mutex. With this in place, there is no longer a UAF happening
and the tcx_entry is freed at the correct time.
Fixes: e420bed02507 ("bpf: Add fd-based tcx multi-prog infra with link support")
Reported-by: Pedro Pinto <xten@osec.io>
Co-developed-by: Pedro Pinto <xten@osec.io>
Signed-off-by: Pedro Pinto <xten@osec.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hyunwoo Kim <v4bel@theori.io>
Cc: Wongi Lee <qwerty@theori.io>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240708133130.11609-1-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
It's very useful to be able to interrupt the tests during development.
Detect KeyboardInterrupt, run the cleanups and exit.
Link: https://patch.msgid.link/20240705015222.675840-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
to avoid reading wrong WPTR from doorbell in sriov vf, set
CP_HQD_PQ_DOORBELL_CONTROL.DOORBELL_MODE to 1 to read WPTR from MQD.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add "Series" to MI200 and MI300 to clarify that they represent the
series of cards, and to more closely match the product information
materials. This also matches other entries in this list
Also correct a typo in the MI300 codename (Vangaram->Vanjaram)
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add amdgpu ras 'event_state' sysfs device attribute support
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
V1: This patch enables following UMD stable Pstates profile
levels for power_dpm_force_performance_level interface.
- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard
V2: Fix conflict with commit "drm/amd/pm: smu v14.0.4 reuse smu v14.0.0 dpmtable "
V3: Add VCLK1 and DCLK1 support for SMU V14.0.1
And avoid to set VCLK1 and DCLK1 for SMU v14.0.0
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add amdgpu ras POSION_CONSUMPTION event id support.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFX v9.4.4 uses mode1 reset to handle poison consumption.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add amdgpu ras POSION_CREATION event id support.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
- use unified event id to manage ras events
- add a new function amdgpu_ras_query_error_status_with_event() to accept
event type as parameter.
v2:
add a warn log to show the location of function failure
when calling amdgpu_ras_mark_event(). (Tao Zhou)
v3:
change RAS_EVENT_TYPE_ISR to RAS_EVENT_TYPE_FATAL.
v4:
rename amdgpu_ras_get_recovery_event() to
amdgpu_ras_get_fatal_error_event().
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In dm resume, we firstly restore dc state and do the mst resume for topology
probing thereafter. If we change dpcd DP_MSTM_CTRL value after LT in mst reume,
it will cause light up problem on the hub.
[How]
Revert commit 202dc359adda ("drm/amd/display: Defer handling mst up request in resume").
And adjust the reason to trigger dc_link_detect by DETECT_REASON_RESUMEFROMS3S4.
Cc: stable@vger.kernel.org
Fixes: 202dc359adda ("drm/amd/display: Defer handling mst up request in resume")
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A gang submit won't work if the VMID is reserved and we can't flush out
VM changes from multiple engines at the same time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DPG mode is enabled for vcn and jpeg on VCN v4_0_5
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
remove redundant semicolons in RAS_EVENT_LOG to avoid
code format check warning.
Fixes: b712d7c20133 ("drm/amdgpu: fix compiler 'side-effect' check issue for RAS_EVENT_LOG()")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While moving buffer which has dcc tiling config, it is needed to restore
its original dcc tiling.
1. extend copy flag to cover tiling bits
2. add logic to restore original dcc tiling config
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of all the CP GFX queues for gfx12 ipdump
to be used by devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx12 support of CP queue registers for all queues
to be used by devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable redirection of irq for pagefaults for specific
clients to avoid overflow without dropping interrupts.
So here we redirect the interrupts to another IH ring
i.e ring1 where only these interrupts are processed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need IH ring1 for handling the pagefault
interrupts which over flow in default
ring for specific usecases.
Enable ring1 allows software to redirect
high interrupts to ring1 from default IH
ring.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If VF request full GPU access and the request failed,
the VF driver can get stuck accessing registers for an extended period during
the unload of KMS.
[How]
Set no_hw_access flag when VF request for full GPU access fails
This prevents further hardware access attempts, avoiding the prolonged
stuck state.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support of gfx12 ipdump print so devcoredump
could trigger it to dump the captured registers
in devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add general registers of gfx12 in ipdump for
devcoredump support.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update gfxhub client id for gfx12
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Certain call paths still load the SMU firmware for APUs,
which needs to be skipped.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Sysfs node disable query error count during gpu reset.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fexit_sleep test runs successfully now on the BPF CI so remove it
from the deny list. ftrace direct calls was blocking tracing programs
on arm64 but it has been resolved by now. For more details see also
discussion in [*].
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org [*]
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While at it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Message-Id: <20240708150914.18190-2-u.kleine-koenig@baylibre.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
I've resigned from Unisoc (formerly Spreadtrum) and cannot access
internal HW specifications any more, also cannot commit much
time for maintaining sprd code, especially DTS.
While I'm happy to help review the sprd drivers I wrote before.
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20240705091133.3308539-1-zhangchunyan@iscas.ac.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.11-rc1
This is a simple change that condenses two function calls into one in
two places to save some boilerplate.
* tag 'tegra-for-6.11-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Simplify resource lookup
Link: https://lore.kernel.org/r/20240628210818.3627404-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/defconfig
RISC-V config update for v6.11
StarFive:
Enable most of the options needed for the jh7100 based boards to be
properly testable with defconfig.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: defconfig: Enable StarFive JH7110 drivers
Link: https://lore.kernel.org/r/20240707-unused-outflank-aa127ccb2cfe@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 defconfig updates for v6.11
This enables the newly introduce Shared Memory Bridge driver which
improves the mechansim with which buffers are shared with TrustZone.
It turns MSM8996, SM8150 and SM8350 interconnect providers to builtin,
as debug UART now depends on these. The SM8350 GPU clock controller is
enabled.
The secure QFPROM driver is enabled, to provide access to OTP
configuration for the LLCC driver on the QDU1000 platform.
* tag 'qcom-arm64-defconfig-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
arm64: defconfig: Enable secure QFPROM driver
arm64: defconfig: enable several Qualcomm interconnects
arm64: defconfig: make CONFIG_INTERCONNECT_QCOM_SM8350 built-in
arm64: defconfig: enable CONFIG_SM_GPUCC_8350
Link: https://lore.kernel.org/r/20240706155347.16207-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig
TI K3 defconfig updates for v6.11
Enable Hyperbus support present on various J7xx EVMs
OMAP_USB2 driver for AM65 SoC
LP873X PMIC related drivers for am642-phyboard-electra
* tag 'ti-k3-config-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable TI LP873X PMIC
arm64: defconfig: Enable USB2 PHY Driver
arm64: defconfig: Enable MTD support for Hyperbus
Link: https://lore.kernel.org/r/c6b2a0c3-e8c3-4e7a-90ca-a3b9834c63c9@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable MCP23S08 I/O expanders to manage Ethernet PHY
reset in STM32MP135F-DK board.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20240705134407.2833659-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The header file stringpool.h is included for GCC version >= 8 and then
again for all versions.
Since the header file stringpool.h was added in GCC 4.9 and the kernel
currently requires GCC 5.1 as a minimum, remove the conditional include.
Including the header file only once removes the following warning
reported by make includecheck:
stringpool.h is included more than once
However, it's important to include stringpool.h before attribs.h
because attribs.h uses some of its functions.
Compile-tested with GCC 14.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240629233608.278028-2-thorsten.blum@toblux.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
If of_platform_populate() is called when CONFIG_OF is not defined this
leads to spurious error messages of the following type:
pci 0000:00:01.1: failed to populate child OF nodes (-19)
pci 0000:00:02.1: failed to populate child OF nodes (-19)
Fixes: 8fb18619d910 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20240702173255.39932-1-superm1@kernel.org/
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Reported-by: Praveenkumar Patil <PraveenKumar.Patil@amd.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240707183829.41519-1-spasswolf@web.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If we fail to call crypto_sync_skcipher_setkey, we should free the
memory allocation for cipher, replace err_return with err_free_cipher
to free the memory of cipher.
Fixes: 4891f2d008e4 ("gss_krb5: import functionality to derive keys into the kernel")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I recently found out about B: for noting where subsystem bugs can be
filed. I do pay attention to bugzilla.kernel.org. The Linux NFS
community has decided to steer kernel NFS issues to the kernel.org
bugzilla instead of bugzilla.linux-nfs.org.
Remove the W: entry; the sourceforge information is stale and
unmaintained.
Cc: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Allow the pool_mode setting code to be called from internal callers
so we can call it from a new netlink op. Add a new svc_pool_map_get
function to return the current setting. Change the existing module
parameter handling to use the new interfaces under the hood.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that nfsd_svc can handle an array of thread counts, fix up the
netlink threads interface to construct one from the netlink call
and pass it through so we can start a pooled server the same way we
would start a normal one.
Note that any unspecified values in the array are considered zeroes,
so it's possible to shut down a pooled server by passing in a short
array that has only zeros, or even an empty array.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the refcounting is fixed, rework nfsd_svc to use the same
thread setup as the pool_threads interface. Have it take an array of
thread counts instead of just a single value, and pass that from the
netlink threads set interface. Since the new netlink interface doesn't
have the same restriction as pool_threads, move the guard against
shutting down all threads to write_pool_threads.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Only pooled services take a reference to the svc_pool_map. The sunrpc
code has always used the sv_nrpools value to detect whether the service
is pooled.
The problem there is that nfsd is a pooled service, but when it's
running in "global" pool_mode, it doesn't take a reference to the pool
map because it has a sv_nrpools value of 1. This means that we have
two separate codepaths for starting the server, depending on whether
it's pooled or not.
Fix this by adding a new flag to the svc_serv, that indicates whether
the serv is pooled. With this we can have the nfsd service
unconditionally take a reference, regardless of pool_mode.
Note that this is a behavior change for
/sys/module/sunrpc/parameters/pool_mode. Usually this file does not
allow you to change the pool-mode while there are nfsd threads running,
but if the pool-mode is "global" it's allowed. My assumption is that
this is a bug, since it probably should never have worked this way.
This patch changes the behavior such that you get back EBUSY even
when nfsd is running in global mode. I think this is more reasonable
behavior, and given that most people set this today using the module
parameter, it's doubtful anyone will notice.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The trace point in svc_xprt_close() reports only some local close
requests. Try to capture more local close requests.
Note that "trace-cmd record -T -e sunrpc:svc_xprt_close" will
neatly capture the identity of the caller requesting the close.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I noticed LAYOUTGET(LAYOUTIOMODE4_RW) returning NFS4ERR_ACCESS
unexpectedly. The NFS client had created a file with mode 0444, and
the server had returned a write delegation on the OPEN(CREATE). The
client was requesting a RW layout using the write delegation stateid
so that it could flush file modifications.
Creating a read-only file does not seem to be problematic for
NFSv4.1 without pNFS, so I began looking at NFSD's implementation of
LAYOUTGET.
The failure was because fh_verify() was doing a permission check as
part of verifying the FH presented during the LAYOUTGET. It uses the
loga_iomode value to specify the @accmode argument to fh_verify().
fh_verify(MAY_WRITE) on a file whose mode is 0444 fails with -EACCES.
To permit LAYOUT* operations in this case, add OWNER_OVERRIDE when
checking the access permission of the incoming file handle for
LAYOUTGET and LAYOUTCOMMIT.
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v6.6+
Message-Id: 4E9C0D74-A06D-4DC3-A48A-73034DC40395@oracle.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since CONFIG_NFSD_LEGACY_CLIENT_TRACKING is a new config option, its
initial default setting should have been Y (if we are to follow the
common practice of "default Y, wait, default N, wait, remove code").
Paul also suggested adding a clearer remedy action to the warning
message.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Message-Id: <d2ab4ee7-ba0f-44ac-b921-90c8fa5a04d2@molgen.mpg.de>
Fixes: 74fd48739d04 ("nfsd: new Kconfig option for legacy client tracking")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
