summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-25netfilter: nf_conntrack_pptp: prevent buffer overflows in debug codePablo Neira Ayuso
Dan Carpenter says: "Smatch complains that the value for "cmd" comes from the network and can't be trusted." Add pptp_msg_name() helper function that checks for the array boundary. Fixes: f09943fefe6b ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-25netfilter: ipset: Fix subcounter update skipPhil Sutter
If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE must be set, not unset. Fixes: 6e01781d1c80e ("netfilter: ipset: set match: add support to match the counters") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-25netfilter: nft_reject_bridge: enable reject with bridge vlanMichael Braun
Currently, using the bridge reject target with tagged packets results in untagged packets being sent back. Fix this by mirroring the vlan id as well. Fixes: 85f5b3086a04 ("netfilter: bridge: add reject support") Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-25RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe()Qiushi Wu
In function pvrdma_pci_probe(), pdev was not disabled in one error path. Thus replace the jump target “err_free_device” by "err_disable_pdev". Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Link: https://lore.kernel.org/r/20200523030457.16160-1-wu000273@umn.edu Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-25xfrm: fix a warning in xfrm_policy_insert_listXin Long
This waring can be triggered simply by: # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 1 mark 0 mask 0x10 #[1] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x1 #[2] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x10 #[3] Then dmesg shows: [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace: [ ] xfrm_policy_inexact_insert+0x85/0xe50 [ ] xfrm_policy_insert+0x4ba/0x680 [ ] xfrm_add_policy+0x246/0x4d0 [ ] xfrm_user_rcv_msg+0x331/0x5c0 [ ] netlink_rcv_skb+0x121/0x350 [ ] xfrm_netlink_rcv+0x66/0x80 [ ] netlink_unicast+0x439/0x630 [ ] netlink_sendmsg+0x714/0xbf0 [ ] sock_sendmsg+0xe2/0x110 The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities. However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list(). This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match(). Thanks to Yuehaibing, we could make this fix better. v1->v2: - check policy->mark.v == pol->mark.v only without mask. Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-05-25cfg80211: fix debugfs rename crashJohannes Berg
Removing the "if (IS_ERR(dir)) dir = NULL;" check only works if we adjust the remaining code to not rely on it being NULL. Check IS_ERR_OR_NULL() before attempting to dereference it. I'm not actually entirely sure this fixes the syzbot crash as the kernel config indicates that they do have DEBUG_FS in the kernel, but this is what I found when looking there. Cc: stable@vger.kernel.org Fixes: d82574a8e5a4 ("cfg80211: no need to check return value of debugfs_create functions") Reported-by: syzbot+fd5332e429401bf42d18@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200525113816.fc4da3ec3d4b.Ica63a110679819eaa9fb3bc1b7437d96b1fd187d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-25Merge tag 'arm-soc/for-5.7/devicetree-fixes-part2-v2' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.7, please pull the following: - Vincent fixes the polarity of the ACT LED on the Raspberry Pi Zero W board - Hamish fixes the ARM PPI interrupts sensitivy for the Hurricane 2 SoCs * tag 'arm-soc/for-5.7/devicetree-fixes-part2-v2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm: HR2: Fix PPI interrupt types ARM: dts: bcm2835-rpi-zero-w: Fix led polarity Link: https://lore.kernel.org/r/20200524203714.17035-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe()Tiezhu Yang
Propagate the error code returned by devm_platform_ioremap_resource() out of probe() instead of overwriting it. Fixes: 72d8cb715477 ("drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: pxa: Fix return value of pxa_gpio_probe()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 542c25b7a209 ("drivers: gpio: pxa: use devm_platform_ioremap_resource()") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25gpio: mlxbf2: Fix sleeping while holding spinlockAxel Lin
mutex_lock() can sleep, don't call mutex_lock() while holding spin_lock. Fixes: bc0ae0e737f5 ("gpio: add driver for Mellanox BlueField 2 GPIO controller") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: asmaa@mellanox.com Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-25mmc: block: Fix use-after-free issue for rpmbPeng Hao
The data structure member “rpmb->md” was passed to a call of the function “mmc_blk_put” after a call of the function “put_device”. Reorder these function calls to keep the data accesses consistent. Fixes: 1c87f7357849 ("mmc: block: Fix bug when removing RPMB chardev ") Signed-off-by: Peng Hao <richard.peng@oppo.com> Cc: stable@vger.kernel.org [Uffe: Fixed up mangled patch and updated commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-25ieee80211: Fix incorrect mask for default PE durationPradeep Kumar Chitrapu
Fixes bitmask for HE opration's default PE duration. Fixes: daa5b83513a7 ("mac80211: update HE operation fields to D3.0") Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Link: https://lore.kernel.org/r/20200506102430.5153-1-pradeepc@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-25mac80211: mesh: fix discovery timer re-arming issue / crashLinus Lüssing
On a non-forwarding 802.11s link between two fairly busy neighboring nodes (iperf with -P 16 at ~850MBit/s TCP; 1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with frequent PREQ retries, usually after around 30-40 seconds the following crash would occur: [ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000 [ 1110.830786] Mem abort info: [ 1110.833573] Exception class = IABT (current EL), IL = 32 bits [ 1110.839494] SET = 0, FnV = 0 [ 1110.842546] EA = 0, S1PTW = 0 [ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000 [ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000 [ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP [ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common [ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000) [ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0 [ 1110.944965] Hardware name: LS1043A RGW Board (DT) [ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000 [ 1110.955568] PC is at 0x0 [ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78 [ 1110.963055] pc : [<0000000000000000>] lr : [<ffff0000080ff29c>] pstate: 00400145 [ 1110.970440] sp : ffff00000801be10 [ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018 [ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0 [ 1110.984352] x25: 0000000000000000 x24: 0000000000000000 [ 1110.989657] x23: dead000000000200 x22: 0000000000000000 [ 1110.994959] x21: 0000000000000000 x20: 0000000000000101 [ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000 [ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058 [ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000 [ 1111.016172] x13: ffff000008916788 x12: 0000000000000040 [ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001 [ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004 [ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8 [ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010 [ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614 [ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000 [ 1111.053290] Call trace: [ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10) [ 1111.062158] bcc0: 0000000000000000 0000000000000000 [ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0 [ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0 [ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788 [ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0 [ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000 [ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000 [ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10 [ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145 [ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8 [ 1111.140353] be00: ffff00000801be10 0000000000000000 [ 1111.145220] [< (null)>] (null) [ 1111.149917] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 1111.155741] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 1111.161130] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 1111.166002] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 1111.171825] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 [ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70) [ 1111.183642] be20: 0000000000000020 0000000000000000 [ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000 [ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0 [ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000 [ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0 [ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000 [ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000 [ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70 [ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145 [ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574 [ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0 [ 1111.266706] [<ffff0000080832e8>] el1_irq+0xe8/0x18c [ 1111.271576] [<ffff0000080857d0>] arch_cpu_idle+0x10/0x18 [ 1111.276880] [<ffff0000080d7de4>] do_idle+0xec/0x1b8 [ 1111.281748] [<ffff0000080d8020>] cpu_startup_entry+0x20/0x28 [ 1111.287399] [<ffff00000808f81c>] secondary_start_kernel+0x104/0x110 [ 1111.293662] Code: bad PC value [ 1111.296710] ---[ end trace 555b6ca4363c3edd ]--- [ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt [ 1111.307661] SMP: stopping secondary CPUs [ 1111.311574] Kernel Offset: disabled [ 1111.315053] CPU features: 0x0002000 [ 1111.318530] Memory Limit: none [ 1111.321575] Rebooting in 3 seconds.. With some added debug output / delays we were able to push the crash from the timer callback runner into the callback function and by that shedding some light on which object holding the timer gets corrupted: [ 401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868 [...] [ 402.335836] [<ffff0000088fafa4>] _raw_spin_lock_bh+0x14/0x48 [ 402.341548] [<ffff000000dbe684>] mesh_path_timer+0x10c/0x248 [mac80211] [ 402.348154] [<ffff0000080ff29c>] call_timer_fn.isra.27+0x24/0x78 [ 402.354150] [<ffff0000080ff77c>] run_timer_softirq+0x184/0x398 [ 402.359974] [<ffff000008081938>] __do_softirq+0x100/0x1fc [ 402.365362] [<ffff0000080a2e28>] irq_exit+0x80/0xd8 [ 402.370231] [<ffff0000080ea708>] __handle_domain_irq+0x88/0xb0 [ 402.376053] [<ffff000008081678>] gic_handle_irq+0x68/0xb0 The issue happens due to the following sequence of events: 1) mesh_path_start_discovery(): -> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx() 2) mesh_path_free_rcu() -> del_timer_sync(&mpath->timer) [...] -> kfree_rcu(mpath) 3) mesh_path_start_discovery(): -> mod_timer(&mpath->timer, ...) [...] -> rcu_read_unlock() 4) mesh_path_free_rcu()'s kfree_rcu(): -> kfree(mpath) 5) mesh_path_timer() starts after timeout, using freed mpath object So a use-after-free issue due to a timer re-arming bug caused by an early spin-unlocking. This patch fixes this issue by re-checking if mpath is about to be free'd and if so bails out of re-arming the timer. Cc: stable@vger.kernel.org Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-24Linux 5.7-rc7Linus Torvalds
2020-05-24mtd: rawnand: arasan: Add new Arasan NAND controllerMiquel Raynal
Add the Arasan NAND controller driver. This brings only NAND controller support. The ECC engine being a bit subtle, hardware ECC support will be added in a second time. This work is based on contributions from Naga Sureshkumar Relli. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-8-miquel.raynal@bootlin.com
2020-05-24dt-bindings: mtd: Document ARASAN NAND bindingsMiquel Raynal
Document the Arasan NAND controller bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-7-miquel.raynal@bootlin.com
2020-05-24MAINTAINERS: Add Arasan NAND controller and bindingsMiquel Raynal
Fill a new entry for the Arasan NAND controller. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-6-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Add nand_extract_bits()Miquel Raynal
There are cases where ECC bytes are not byte-aligned. Indeed, BCH implies using a number of ECC bits, which are not always a multiple of 8. We then need a helper like nand_extract_bits() to extract these syndromes from a buffer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-5-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Ensure the number of bitflips is consistentMiquel Raynal
The main NAND read page function can loop over "page reads" many times in if the reading reports uncorrectable error(s) and if the chip supports the read_retry feature. In this case, the number of bitflips is summarized between attempts. Fix this by re-initializing the entire mtd_ecc_stats object each time we retry. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-4-miquel.raynal@bootlin.com
2020-05-24lib/bch: Allow easy bit swappingMiquel Raynal
It seems that several hardware ECC engine use a swapped representation of bytes compared to software. This might having to do with how the ECC engine is wired to the NAND controller or the order the bits are passed to the hardware BCH logic. This means that when the software BCH engine is working in conjunction with data generated with hardware, sometimes we might need to swap the bits inside bytes, eg: 0x0A = b0000_1010 -> b0101_0000 = 0x50 Make it possible by adding a boolean to the BCH initialization routine. Regarding the implementation itself, this is a rather simple approach that can probably be enhanced in the future by preparing the ->a_{mod,pow}_tab tables with the swapping in mind. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-3-miquel.raynal@bootlin.com
2020-05-24lib/bch: Rework a little bit the exported function namesMiquel Raynal
There are four exported functions, all suffixed by _bch, which is clearly not the norm. Let's rename them by prefixing them with bch_ instead. This is a mechanical change: init_bch -> bch_init free_bch -> bch_free encode_bch -> bch_encode decode_bch -> bch_decode Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-2-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: micron: Adapt the PAGE READ flow to constraint controllersMiquel Raynal
There are controllers not able to just read data cycles on the bus. There are controllers not able to do a change column. If we want to support both, we need to check which operation is supported first. This is the exact same mechanism that is in use for parameter page reads (ONFI/JEDEC) as the same problem occurs. Speed testing does not show any throughput penalty so we do not optimize more than that. However it is likely that, in the future, a more robust and exhaustive test will run at boot time to avoid re-checking what is supported and what is not at every call. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519130834.2918-1-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Remove the cmx270 NAND controller driverBoris Brezillon
The CM-X270 board has been removed, we can remove the custom NAND driver as well. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200518163300.304732-1-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: Fix nand_gpio_waitrdy()Boris Brezillon
Mimic what's done in nand_soft_waitrdy() and add one to the jiffies timeout so we don't end up waiting less than actually required. Reported-by: Tudor Ambarus <tudor.ambarus@microchip.com> Fixes: b0e137ad24b6c ("mtd: rawnand: Provide helper for polling GPIO R/B pin") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200518155237.297549-1-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: davinci: Get rid of the legacy interface implementationBoris Brezillon
Now that exec_op() is implemented we can get rid of the legacy interface implementation. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200513172248.141402-4-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: davinci: Implement exec_op()Boris Brezillon
Implement exec_op() so we can later get rid of the legacy interface implementation. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200513172248.141402-3-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: davinci: Stop using nand_chip.legacy.IO_ADDR_{R, W}Boris Brezillon
We can use info->current_cs directly instead of doing this weird IO_ADDR_{R,W} re-assignment dance. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200513172248.141402-2-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: davinci: Inherit from nand_controllerBoris Brezillon
Let's not rely on the dummy_controller embedded in nand_chip.legacy and explicitly inherit from nand_controller instead. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200513172248.141402-1-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: brcmnand: correctly verify erased pagesÁlvaro Fernández Rojas
The current code checks that the whole OOB area is erased. This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will fail due to the usable OOB bytes not being 0xff. Correct this by only checking that data and ECC bytes aren't 0xff. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com
2020-05-24mtd: rawnand: brcmnand: improve hamming oob layoutÁlvaro Fernández Rojas
The current code generates 8 oob sections: S1 1-5 ECC 6-8 S2 9-15 S3 16-21 ECC 22-24 S4 25-31 S5 32-37 ECC 38-40 S6 41-47 S7 48-53 ECC 54-56 S8 57-63 Change it by merging continuous sections: S1 1-5 ECC 6-8 S2 9-21 ECC 22-24 S3 25-37 ECC 38-40 S4 41-53 ECC 54-56 S5 57-63 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-3-noltari@gmail.com
2020-05-24mtd: rawnand: brcmnand: fix hamming oob layoutÁlvaro Fernández Rojas
First 2 bytes are used in large-page nand. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Cc: stable@vger.kernel.org Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-2-noltari@gmail.com
2020-05-24MAINTAINERS: Remove Xiaolei Li and mark MTK NFC as orphanedMiquel Raynal
Xiaolei's address is bouncing, remove him from MAINTAINERS and mark the driver he was maintaining, Mediatek's, as orphaned. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200510211809.15610-2-miquel.raynal@bootlin.com
2020-05-24MAINTAINERS: Remove Piotr Sroka and mark Cadence NFC as orphanedMiquel Raynal
Piotr's address is bouncing, remove him from MAINTAINERS and mark the driver he was maintaining, Cadence's, as orphaned. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200510211809.15610-1-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Propage CS selection to sub operationsBoris Brezillon
Some controller using the instruction parse infrastructure might need to know which CS a specific sub-operation is targeting. Let's propagate this information. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200505101353.1776394-2-boris.brezillon@collabora.com
2020-05-24mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macrosChristophe Kerello
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1589284068-4079-3-git-send-email-christophe.kerello@st.com
2020-05-24mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where ↵Christophe Kerello
relevant This patch renames functions and local variables. This cleanup is done to get all functions starting by stm32_fmc2_nfc in the FMC2 raw NAND driver when all functions will start by stm32_fmc2_ebi in the FMC2 EBI driver. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1589284068-4079-2-git-send-email-christophe.kerello@st.com
2020-05-24Merge tag 'efi-urgent-2020-05-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Thomas Gleixner: "A set of EFI fixes: - Don't return a garbage screen info when EFI framebuffer is not available - Make the early EFI console work properly with wider fonts instead of drawing garbage - Prevent a memory buffer leak in allocate_e820() - Print the firmware error record properly so it can be decoded by users - Fix a symbol clash in the host tool build which only happens with newer compilers. - Add a missing check for the event log version of TPM which caused boot failures on several Dell systems due to an attempt to decode SHA-1 format with the crypto agile algorithm" * tag 'efi-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tpm: check event log version before reading final events efi: Pull up arch-specific prototype efi_systab_show_arch() x86/boot: Mark global variables as static efi: cper: Add support for printing Firmware Error Record Reference efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820() efi/earlycon: Fix early printk for wider fonts efi/libstub: Avoid returning uninitialized data from setup_graphics()
2020-05-24Merge tag 'x86-urgent-2020-05-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Unbreak stack dumps for inactive tasks by interpreting the special first frame left by __switch_to_asm() correctly. The recent change not to skip the first frame so ORC and frame unwinder behave in the same way caused all entries to be unreliable, i.e. prepended with '?'. - Use cpumask_available() instead of an implicit NULL check of a cpumask_var_t in mmio trace to prevent a Clang build warning" * tag 'x86-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables
2020-05-24Merge tag 'sched-urgent-2020-05-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A set of fixes for the scheduler: - Fix handling of throttled parents in enqueue_task_fair() completely. The recent fix overlooked a corner case where the first iteration terminates due to an entity already being on the runqueue which makes the list management incomplete and later triggers the assertion which checks for completeness. - Fix a similar problem in unthrottle_cfs_rq(). - Show the correct uclamp values in procfs which prints the effective value twice instead of requested and effective" * tag 'sched-urgent-2020-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unthrottle_cfs_rq() for leaf_cfs_rq list sched/debug: Fix requested task uclamp values shown in procfs sched/fair: Fix enqueue_task_fair() warning some more
2020-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna Bhowmik. 2) Nexthop attributes aren't being checked properly because of mis-initialized iterator, from David Ahern. 3) Revert iop_idents_reserve() change as it caused performance regressions and was just working around what is really a UBSAN bug in the compiler. From Yuqi Jin. 4) Read MAC address properly from ROM in bmac driver (double iteration proceeds past end of address array), from Jeremy Kerr. 5) Add Microsoft Surface device IDs to r8152, from Marc Payne. 6) Prevent reference to freed SKB in __netif_receive_skb_core(), from Boris Sukholitko. 7) Fix ACK discard behavior in rxrpc, from David Howells. 8) Preserve flow hash across packet scrubbing in wireguard, from Jason A. Donenfeld. 9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric Dumazet. 10) Fix encryption error checking in kTLS code, from Vadim Fedorenko. 11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki. 12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet. 13) Fix use after free in mlxsw driver, from Jiri Pirko. 14) Order kTLS key destruction properly in mlx5 driver, from Tariq Toukan. 15) Check devm_platform_ioremap_resource() return value properly in several drivers, from Tiezhu Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits) net: smsc911x: Fix runtime PM imbalance on error net/mlx4_core: fix a memory leak bug. net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend net: phy: mscc: fix initialization of the MACsec protocol mode net: stmmac: don't attach interface until resume finishes net: Fix return value about devm_platform_ioremap_resource() net/mlx5: Fix error flow in case of function_setup failure net/mlx5e: CT: Correctly get flow rule net/mlx5e: Update netdev txq on completions during closure net/mlx5: Annotate mutex destroy for root ns net/mlx5: Don't maintain a case of del_sw_func being null net/mlx5: Fix cleaning unmanaged flow tables net/mlx5: Fix memory leak in mlx5_events_init net/mlx5e: Fix inner tirs handling net/mlx5e: kTLS, Destroy key object after destroying the TIS net/mlx5e: Fix allowed tc redirect merged eswitch offload cases net/mlx5: Avoid processing commands before cmdif is ready net/mlx5: Fix a race when moving command interface to events mode net/mlx5: Add command entry handling completion rxrpc: Fix a memory leak in rxkad_verify_response() ...
2020-05-23net: smsc911x: Fix runtime PM imbalance on errorDinghao Liu
Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23Merge tag 'mlx5-fixes-2020-05-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2020-05-22 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.13 ('net/mlx5: Add command entry handling completion') For -stable v5.2 ('net/mlx5: Fix error flow in case of function_setup failure') ('net/mlx5: Fix memory leak in mlx5_events_init') For -stable v5.3 ('net/mlx5e: Update netdev txq on completions during closure') ('net/mlx5e: kTLS, Destroy key object after destroying the TIS') ('net/mlx5e: Fix inner tirs handling') For -stable v5.6 ('net/mlx5: Fix cleaning unmanaged flow tables') ('net/mlx5: Fix a race when moving command interface to events mode') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net/mlx4_core: fix a memory leak bug.Qiushi Wu
In function mlx4_opreq_action(), pointer "mailbox" is not released, when mlx4_cmd_box() return and error, causing a memory leak bug. Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can free this pointer. Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspendGrygorii Strashko
vlan_for_each() are required to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered - which happens now during System resume from suspend: cpsw_suspend() |- cpsw_ndo_stop() |- __hw_addr_ref_unsync_dev() |- cpsw_purge_all_mc() |- vlan_for_each() |- ASSERT_RTNL(); Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: phy: mscc: fix initialization of the MACsec protocol modeAntoine Tenart
At the very end of the MACsec block initialization in the MSCC PHY driver, the MACsec "protocol mode" is set. This setting should be set based on the PHY id within the package, as the bank used to access the register used depends on this. This was not done correctly, and only the first bank was used leading to the two upper PHYs being unstable when using the VSC8584. This patch fixes it. Fixes: 1bbe0ecc2a1a ("net: phy: mscc: macsec initialization") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: stmmac: don't attach interface until resume finishesLeon Yu
Commit 14b41a2959fb ("net: stmmac: Delete txtimer in suspend") was the first attempt to fix a race between mod_timer() and setup_timer() during stmmac_resume(). However the issue still exists as the commit only addressed half of the issue. Same race can still happen as stmmac_resume() re-attaches interface way too early - even before hardware is fully initialized. Worse, doing so allows network traffic to restart and stmmac_tx_timer_arm() being called in the middle of stmmac_resume(), which re-init tx timers in stmmac_init_coalesce(). timer_list will be corrupted and system crashes as a result of race between mod_timer() and setup_timer(). systemd--1995 2.... 552950018us : stmmac_suspend: 4994 ksoftirq-9 0..s2 553123133us : stmmac_tx_timer_arm: 2276 systemd--1995 0.... 553127896us : stmmac_resume: 5101 systemd--320 7...2 553132752us : stmmac_tx_timer_arm: 2276 (sd-exec-1999 5...2 553135204us : stmmac_tx_timer_arm: 2276 --------------------------------- pc : run_timer_softirq+0x468/0x5e0 lr : run_timer_softirq+0x570/0x5e0 Call trace: run_timer_softirq+0x468/0x5e0 __do_softirq+0x124/0x398 irq_exit+0xd8/0xe0 __handle_domain_irq+0x6c/0xc0 gic_handle_irq+0x60/0xb0 el1_irq+0xb8/0x180 arch_cpu_idle+0x38/0x230 default_idle_call+0x24/0x3c do_idle+0x1e0/0x2b8 cpu_startup_entry+0x28/0x48 secondary_start_kernel+0x1b4/0x208 Fix this by deferring netif_device_attach() to the end of stmmac_resume(). Signed-off-by: Leon Yu <leoyu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23sparc32: fix page table traversal in srmmu_nocache_init()Mike Rapoport
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to page table entry to access srmmu_nocache_pool. But since sparc32 has only three actual page table levels, pgd, p4d and pud are essentially the same thing and pgd_offset() and p4d_offset() are no-ops, the __nocache_fix() should be done only at PUD level. Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it only for PUD and lower levels. Fixes: c2bc26f7ca1f ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add files related to kdump z3fold: fix use-after-free when freeing handles sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init() MAINTAINERS: update email address for Naoya Horiguchi sh: include linux/time_types.h for sockios kasan: disable branch tracing for core runtime selftests/vm/write_to_hugetlbfs.c: fix unused variable warning selftests/vm/.gitignore: add mremap_dontunmap rapidio: fix an error in get_user_pages_fast() error handling x86: bitops: fix build regression device-dax: don't leak kernel memory to user space after unloading kmem
2020-05-23Merge tag 'driver-core-5.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "So, turns out the kobject fix didn't quite work, so here are four patches that in the end, result in just two driver core fixes for reported issues that no one has had problems with. The kobject patch that was originally in here has now been reverted, as Guenter reported boot problems with it on some of his systems" * tag 'driver-core-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "kobject: Make sure the parent does not get released before its children" kobject: Make sure the parent does not get released before its children driver core: Fix handling of SYNC_STATE_ONLY + STATELESS device links driver core: Fix SYNC_STATE_ONLY device link implementation
generated by cgit (git 2.34.1) at 2025-09-16 10:39:16 +0000