summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-04misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attachNavid Emamdoost
In fastrpc_dma_buf_attach if dma_get_sgtable fails the allocated memory for a should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20190925152742.16258-1-navid.emamdoost@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04mtd: spi-nor: Fix direction of the write_sr() transferTudor Ambarus
write_sr() sends data to the SPI memory, fix the direction. Fixes: b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: John Garry <john.garry@huawei.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mei: avoid FW version request on Ibex Peak and earlierAlexander Usyskin
The fixed MKHI client on PCH 6 gen platforms does not support fw version retrieval. The error is not fatal, but it fills up the kernel logs and slows down the driver start. This patch disables requesting FW version on GEN6 and earlier platforms. Fixes warning: [ 15.964298] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version [ 15.964301] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: version command failed -5 Cc: <stable@vger.kernel.org> +v4.18 Cc: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191004181722.31374-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390/pci: mark function(s) __always_inlineHeiko Carstens
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390/mm: mark function(s) __always_inlineHeiko Carstens
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390/jump_label: mark function(s) __always_inlineHeiko Carstens
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390/cpu_mf: mark function(s) __always_inlineHeiko Carstens
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390/atomic,bitops: mark function(s) __always_inlineHeiko Carstens
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390/mm: fix -Wunused-but-set-variable warningsQian Cai
Convert two functions to static inline to get ride of W=1 GCC warnings like, mm/gup.c: In function 'gup_pte_range': mm/gup.c:1816:16: warning: variable 'ptem' set but not used [-Wunused-but-set-variable] pte_t *ptep, *ptem; ^~~~ mm/mmap.c: In function 'acct_stack_growth': mm/mmap.c:2322:16: warning: variable 'new_start' set but not used [-Wunused-but-set-variable] unsigned long new_start; ^~~~~~~~~ Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/lkml/1570138596-11913-1-git-send-email-cai@lca.pw/ Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04s390: mark __cpacf_query() as __always_inlineJiri Kosina
arch/s390/kvm/kvm-s390.c calls on several places __cpacf_query() directly, which makes it impossible to meet the "i" constraint for the asm operands (opcode in this case). As we are now force-enabling CONFIG_OPTIMIZE_INLINING on all architectures, this causes a build failure on s390: In file included from arch/s390/kvm/kvm-s390.c:44: ./arch/s390/include/asm/cpacf.h: In function '__cpacf_query': ./arch/s390/include/asm/cpacf.h:179:2: warning: asm operand 3 probably doesn't match constraints 179 | asm volatile( | ^~~ ./arch/s390/include/asm/cpacf.h:179:2: error: impossible constraint in 'asm' Mark __cpacf_query() as __always_inline in order to fix that, analogically how we fixes __cpacf_check_opcode(), cpacf_query_func() and scpacf_query() already. Reported-and-tested-by: Michal Kubecek <mkubecek@suse.cz> Fixes: d83623c5eab2 ("s390: mark __cpacf_check_opcode() and cpacf_query_func() as __always_inline") Fixes: e60fb8bf68d4 ("s390/cpacf: mark scpacf_query() as __always_inline") Fixes: ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") Fixes: 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING") Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/lkml/nycvar.YFH.7.76.1910012203010.13160@cbobk.fhfr.pm Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-04io_uring: fix reversed nonblock flag for link submissionPavel Begunkov
io_queue_link_head() accepts @force_nonblock flag, but io_ring_submit() passes something opposite. Fixes: c576666863b78 ("io_uring: optimize submit_and_wait API") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-04Merge tag 'usb-serial-5.4-rc2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.4-rc2 Here's a fix for a long-standing issue in the keyspan driver which could lead to NULL-pointer dereferences when a device had unexpected endpoint descriptors. Included are also some new device IDs. All but the last two commits have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.4-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: keyspan: fix NULL-derefs on open() and write() USB: serial: option: add support for Cinterion CLS8 devices USB: serial: option: add Telit FN980 compositions USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20
2019-10-04tty: serial: Fix PORT_LINFLEXUART definitionStefan-gabriel Mirea
The port type macros should have different values for different devices. Currently, PORT_LINFLEXUART conflicts with PORT_SUNIX. Fixes: 09864c1cdf5c ("tty: serial: Add linflexuart driver for S32V234") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Link: https://lore.kernel.org/r/20191004135058.18007-1-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04mei: me: add comet point (lake) LP device idsTomas Winkler
Add Comet Point devices IDs for Comet Lake U platforms. Cc: <stable@vger.kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191001235958.19979-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: n_hdlc: fix build on SPARCRandy Dunlap
Fix tty driver build on SPARC by not using __exitdata. It appears that SPARC does not support section .exit.data. Fixes these build errors: `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o Reported-by: kbuild test robot <lkp@intel.com> Fixes: 063246641d4a ("format-security: move static strings to const") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/675e7bd9-955b-3ff3-1101-a973b58b5b75@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartps: Fix uartps_major handlingMichal Simek
There are two parts which should be fixed. The first one is to assigned uartps_major at the end of probe() to avoid complicated logic when something fails. The second part is initialized uartps_major number to 0 when last device is removed. This will ensure that on next probe driver will ask for new dynamic major number. Fixes: ab262666018d ("serial: uartps: Use the same dynamic major number for all ports") Reported-by: Paul Thomas <pthomas8589@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d2652cda992833315c4f96f06953eb547f928918.1570194248.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartlite: fix exit path null pointerRandy Dunlap
Call uart_unregister_driver() conditionally instead of unconditionally, only if it has been previously registered. This uses driver.state, just as the sh-sci.c driver does. Fixes this null pointer dereference in tty_unregister_driver(), since the 'driver' argument is null: general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:tty_unregister_driver+0x25/0x1d0 Fixes: 238b8721a554 ("[PATCH] serial uartlite driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Peter Korsgaard <jacmet@sunsite.dk> Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: linflexuart: Fix magic SysRq handlingStefan-gabriel Mirea
Following an incorrect indentation reported to me by Dan Carpenter, I noticed that the SysRq lines were inherited from the lpuart driver[1] (note how the 'continue' is aligned to 'sport->port.sysrq = 0') and we have never actually tested the SysRq support. 'sport->sysrq = 0' is not necessary neither before nor after 'continue', because sysrq will already be 0 after uart_handle_sysrq_char() will finish. Also, since the LINFlexD driver never called uart_handle_break(), sysrq would have never been set to a nonzero value, so uart_handle_sysrq_char() was not going to do anything. Break conditions are detected based on a null data byte along with a framing error (stop bit sampled to 0). [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/serial/fsl_lpuart.c?h=b3e3bf2ef2c74f5ce5c19510edbbb9bfc1d249c2#n659 Fixes: 09864c1cdf5c ("tty: serial: Add linflexuart driver for S32V234") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190918184439.7465-1-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: sh-sci: Use platform_get_irq_optional() for optional interruptsGeert Uytterhoeven
As platform_get_irq() now prints an error when the interrupt does not exist, scary warnings may be printed for optional interrupts: sh-sci e6550000.serial: IRQ index 1 not found sh-sci e6550000.serial: IRQ index 2 not found sh-sci e6550000.serial: IRQ index 3 not found sh-sci e6550000.serial: IRQ index 4 not found sh-sci e6550000.serial: IRQ index 5 not found Fix this by calling platform_get_irq_optional() instead for all but the first interrupts, which are optional. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191001180743.1041-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04dt-bindings: serial: sh-sci: Document r8a774b1 bindingsBiju Das
RZ/G2N (R8A774B1) SoC also has the R-Car Gen3 compatible SCIF and HSCIF ports, so document the SoC specific bindings. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1568724324-26995-1-git-send-email-biju.das@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial/sifive: select SERIAL_EARLYCONChristoph Hellwig
The sifive serial driver implements earlycon support, but unless another driver is built in that supports earlycon support it won't be usable. Explicitly select SERIAL_EARLYCON instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Link: https://lore.kernel.org/r/20190910055923.28384-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'Christophe JAILLET
'exit' functions should be marked as __exit, not __init. Fixes: c10b13325ced ("tty: serial: Add RDA8810PL UART driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041702.7357-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'Christophe JAILLET
'exit' functions should be marked as __exit, not __init. Fixes: fc60a8b675bd ("tty: serial: owl: Implement console driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041129.6978-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04media: stkwebcam: fix runtime PM after driver unbindJohan Hovold
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Note that runtime PM has never actually been enabled for this driver since the support_autosuspend flag in its usb_driver struct is not set. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: serial: fix runtime PM after driver unbindJohan Hovold
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: usblp: fix runtime PM after driver unbindJohan Hovold
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: usb-skeleton: fix runtime PM after driver unbindJohan Hovold
Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191001084908.2003-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci-ext-caps.c: Add missing platform_device_put() on error in ↵Wei Yongjun
xhci_create_intel_xhci_sw_pdev() Add the missing platform_device_put() before return from xhci_create_intel_xhci_sw_pdev() in the error handling case. Fixes: 6ed151f26484 ("xhci-ext-caps.c: Add property to disable Intel SW switch") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190905100001.128349-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04dt-bindings: usb: Bring back phy-namesMaxime Ripard
While the original bindings that were superseeded by the YAML schemas didn't mention that phy-names was needed, it turns out that phy-names is required if phys is set according to phy/phy-bindings.txt. Let's add back those properties. Fixes: 14ec072a19ad ("dt-bindings: usb: Convert USB HCD generic binding to YAML") Fixes: c93bcace1098 ("dt-bindings: usb: Convert the generic OHCI binding to YAML") Fixes: c3e2485d5f4f ("dt-bindings: usb: Convert the generic EHCI binding to YAML") Reported-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20191002112651.100504-2-mripard@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04ARM: dts: sunxi: Revert phy-names removal for ECHI and OHCIMaxime Ripard
This reverts commits 3d109bdca981 ("ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI"), 0a3df8bb6dad ("ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI") and 3c7ab90aaa28 ("arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI"). It turns out that while the USB bindings were not mentionning it, the PHY client bindings were mandating that phy-names is set when phys is. Let's add it back. Fixes: 3d109bdca981 ("ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI") Fixes: 0a3df8bb6dad ("ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI") Fixes: 3c7ab90aaa28 ("arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI") Reported-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20191002112651.100504-1-mripard@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behaviorYoshihiro Shimoda
According to usb_ep_set_halt()'s description, __usbhsg_ep_set_halt_wedge() should return -EAGAIN if the IN endpoint has any queue or data. Otherwise, this driver is possible to cause just STALL without sending a short packet data on g_mass_storage driver, and then a few resetting a device happens on a host side during a usb enumaration. Fixes: 2f98382dcdfe ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1569924633-322-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}()Yoshihiro Shimoda
The commit 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area") had added a usbhsg_pipe_disable() calling into __usbhsg_ep_set_halt_wedge() accidentally. But, this driver should not call the usbhsg_pipe_disable() because the function discards all queues. So, this patch removes it. Fixes: 97664a207bc2 ("usb: renesas_usbhs: shrink spin lock area") Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1569924633-322-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04udc: lpc32xx: fix 64-bit compiler warningArnd Bergmann
gcc points out a suspicious cast from a pointer to an 'int' when compile-testing on 64-bit architectures. drivers/usb/gadget/udc/lpc32xx_udc.c: In function ‘udc_pop_fifo’: drivers/usb/gadget/udc/lpc32xx_udc.c:1156:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/usb/gadget/udc/lpc32xx_udc.c: In function ‘udc_stuff_fifo’: drivers/usb/gadget/udc/lpc32xx_udc.c:1257:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] The code works find, but it's easy enough to change the cast to a uintptr_t to shut up that warning. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190918200201.2292008-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete()Mathias Nyman
udev stored in ep->hcpriv might be NULL if tt buffer is cleared due to a halted control endpoint during device enumeration xhci_clear_tt_buffer_complete is called by hub_tt_work() once it's scheduled, and by then usb core might have freed and allocated a new udev for the next enumeration attempt. Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") Cc: <stable@vger.kernel.org> # v5.3 Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-9-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Increase STS_SAVE timeout in xhci_suspend()Kai-Heng Feng
After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend. Although the algorithms are essentially the same, the old max timeout is (usec + usec * time of doing readl()), and the new max timeout is just usec, which is much less than the old one. Increase the timeout to make ASMedia xHCI able to suspend again. BugLink: https://bugs.launchpad.net/bugs/1844021 Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Prevent deadlock when xhci adapter breaks during initBill Kuzeja
The system can hit a deadlock if an xhci adapter breaks while initializing. The deadlock is between two threads: thread 1 is tearing down the adapter and is stuck in usb_unlocked_disable_lpm waiting to lock the hcd->handwidth_mutex. Thread 2 is holding this mutex (while still trying to add a usb device), but is stuck in xhci_endpoint_reset waiting for a stop or config command to complete. A reboot is required to resolve. It turns out when calling xhci_queue_stop_endpoint and xhci_queue_configure_endpoint in xhci_endpoint_reset, the return code is not checked for errors. If the timing is right and the adapter dies just before either of these commands get issued, we hang indefinitely waiting for a completion on a command that didn't get issued. This wasn't a problem before the following fix because we didn't send commands in xhci_endpoint_reset: commit f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") With the patch I am submitting, a duration test which breaks adapters during initialization (and which deadlocks with the standard kernel) runs without issue. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: <stable@vger.kernel.org> # v4.17+ Cc: Torez Smith <torez@redhat.com> Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Signed-off-by: Torez Smith <torez@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-7-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usb: xhci: wait for CNR controller not ready bit in xhci resumeRick Tseng
NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold. Thus we need to wait for CNR bit to clear in xhci resume, just as in xhci init. [Minor changes to comment and commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Rick Tseng <rtseng@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hostsMathias Nyman
Early xHCI 1.1 spec did not mention USB 3.1 capable hosts should set sbrn to 0x31, or that the minor revision is a two digit BCD containing minor and sub-minor numbers. This was later clarified in xHCI 1.2. Some USB 3.1 capable hosts therefore have sbrn set to 0x30, or minor revision set to 0x1 instead of 0x10. Detect the USB 3.1 capability correctly for these hosts as well Fixes: ddd57980a0fd ("xhci: detect USB 3.2 capable host controllers correctly") Cc: <stable@vger.kernel.org> # v4.18+ Cc: Loïc Yhuel <loic.yhuel@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-5-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Check all endpoints for LPM timeoutJan Schmidt
If an endpoint is encountered that returns USB3_LPM_DEVICE_INITIATED, keep checking further endpoints, as there might be periodic endpoints later that return USB3_LPM_DISABLED due to shorter service intervals. Without this, the code can set too high a maximum-exit-latency and prevent the use of multiple USB3 cameras that should be able to work. Cc: <stable@vger.kernel.org> Signed-off-by: Jan Schmidt <jan@centricular.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Prevent device initiated U1/U2 link pm if exit latency is too longMathias Nyman
If host/hub initiated link pm is prevented by a driver flag we still must ensure that periodic endpoints have longer service intervals than link pm exit latency before allowing device initiated link pm. Fix this by continue walking and checking endpoint service interval if xhci_get_timeout_no_hub_lpm() returns anything else than USB3_LPM_DISABLED While at it fix the split line error message Tested-by: Jan Schmidt <jan@centricular.com> Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-3-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04xhci: Fix false warning message about wrong bounce buffer write lengthMathias Nyman
The check printing out the "WARN Wrong bounce buffer write length:" uses incorrect values when comparing bytes written from scatterlist to bounce buffer. Actual copied lengths are fine. The used seg->bounce_len will be set to equal new_buf_len a few lines later in the code, but is incorrect when doing the comparison. The patch which added this false warning was backported to 4.8+ kernels so this should be backported as far as well. Cc: <stable@vger.kernel.org> # v4.8+ Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1570190373-30684-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04cfg80211: wext: avoid copying malformed SSIDsWill Deacon
Ensure the SSID element is bounds-checked prior to invoking memcpy() with its length field, when copying to userspace. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191004095132.15777-2-will@kernel.org [adjust commit log a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-04USB: legousbtower: fix open after failed reset requestJohan Hovold
The driver would return with a nonzero open count in case the reset control request failed. This would prevent any further attempts to open the char dev until the device was disconnected. Fix this by incrementing the open count only on successful open. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: legousbtower: fix potential NULL-deref on disconnectJohan Hovold
The driver is using its struct usb_device pointer as an inverted disconnected flag, but was setting it to NULL before making sure all completion handlers had run. This could lead to a NULL-pointer dereference in a number of dev_dbg and dev_err statements in the completion handlers which relies on said pointer. Fix this by unconditionally stopping all I/O and preventing resubmissions by poisoning the interrupt URBs at disconnect and using a dedicated disconnected flag. This also makes sure that all I/O has completed by the time the disconnect callback returns. Fixes: 9d974b2a06e3 ("USB: legousbtower.c: remove err() usage") Fixes: fef526cae700 ("USB: legousbtower: remove custom debug macro") Fixes: 4dae99638097 ("USB: legotower: remove custom debug macro and module parameter") Cc: stable <stable@vger.kernel.org> # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: legousbtower: fix deadlock on disconnectJohan Hovold
Fix a potential deadlock if disconnect races with open. Since commit d4ead16f50f9 ("USB: prevent char device open/deregister race") core holds an rw-semaphore while open is called and when releasing the minor number during deregistration. This can lead to an ABBA deadlock if a driver takes a lock in open which it also holds during deregistration. This effectively reverts commit 78663ecc344b ("USB: disconnect open race in legousbtower") which needlessly introduced this issue after a generic fix for this race had been added to core by commit d4ead16f50f9 ("USB: prevent char device open/deregister race"). Fixes: 78663ecc344b ("USB: disconnect open race in legousbtower") Cc: stable <stable@vger.kernel.org> # 2.6.24 Reported-by: syzbot+f9549f5ee8a5416f0b95@syzkaller.appspotmail.com Tested-by: syzbot+f9549f5ee8a5416f0b95@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04USB: legousbtower: fix slab info leak at probeJohan Hovold
Make sure to check for short transfers when retrieving the version information at probe to avoid leaking uninitialised slab data when logging it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20190919083039.30898-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04KVM: x86: omit "impossible" pmu MSRs from MSR listPaolo Bonzini
INTEL_PMC_MAX_GENERIC is currently 32, which exceeds the 18 contiguous MSR indices reserved by Intel for event selectors. Since some machines actually have MSRs past the reserved range, filtering them against x86_pmu.num_counters_gp may have false positives. Cut the list to 18 entries to avoid this. Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jim Mattson <jamttson@google.com> Fixes: e2ada66ec418 ("kvm: x86: Add Intel PMU MSRs to msrs_to_save[]", 2019-08-21) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-04mac80211: Reject malformed SSID elementsWill Deacon
Although this shouldn't occur in practice, it's a good idea to bounds check the length field of the SSID element prior to using it for things like allocations or memcpy operations. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191004095132.15777-1-will@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-04mac80211_hwsim: fix incorrect dev_alloc_name failure gotoMichael Vassernis
If dev_alloc_name fails, hwsim_mon's memory allocated in alloc_netdev needs to be freed. Change goto command in dev_alloc_name failure to out_free_mon in order to perform free_netdev. Signed-off-by: Michael Vassernis <michael.vassernis@tandemg.com> Link: https://lore.kernel.org/r/20191003073049.3760-1-michael.vassernis@tandemg.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:17:07 +0000