summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-14r8152: change the descriptorhayeswang
The r8152 could support RTL8153. Update the relative descriptor. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15powerpc/eeh: Add restore_config operationGavin Shan
After reset on the specific PE or PHB, we never configure AER correctly on PowerNV platform. We needn't care it on pSeries platform. The patch introduces additional EEH operation eeh_ops:: restore_config() so that we have chance to configure AER correctly for PowerNV platform. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15powerpc/powernv: Remove unnecessary assignmentGavin Shan
We don't have IO ports on PHB3 and the assignment of variable "iomap_off" on PHB3 is meaningless. The patch just removes the unnecessary assignment to the variable. The code change should have been part of commit c35d2a8c ("powerpc/powernv: Needn't IO segment map for PHB3"). Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15Revert "pseries/iommu: Remove DDW on kexec"Nishanth Aravamudan
After reverting 25ebc45b93452d0bc60271f178237123c4b26808 ("powerpc/pseries/iommu: remove default window before attempting DDW manipulation"), we no longer remove the base window in enable_ddw. Therefore, we no longer need to reset the DMA window state in find_existing_ddw_windows(). We can instead go back to what was done before, which simply reuses the previous configuration, if any. Further, this removes the final caller of the reset-pe-dma-windows call, so remove those functions. This fixes an EEH on kdump with the ipr driver. The EEH occurs, because the initcall removes the DDW configuration (64-bit DMA window), but doesn't ensure the ops are via the IOMMU -- a DMA operation occurs during probe (still investigating this) and we EEH. This reverts commit 14b6f00f8a4fdec5ccd45a0710284de301a61628. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15Revert "powerpc/pseries/iommu: remove default window before attempting DDW ↵Nishanth Aravamudan
manipulation" Ben rightfully pointed out that there is a race in the "newer" DDW code. Presuming we are running on recent enough firmware that supports the "reset" DDW manipulation call, we currently always remove the base 32-bit DMA window in order to maximize the resources for Phyp when creating the 64-bit window. However, this can be problematic for the case where multiple functions are in the same PE (partitionable endpoint), where some funtions might be 32-bit DMA only. All of a sudden, the only functional DMA window for such functions is gone. We will have serious errors in such situations. The best solution is simply to revert the extension to the DDW code where we ever remove the base DMA window. This reverts commit 25ebc45b93452d0bc60271f178237123c4b26808. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15powerpc: Delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. The one instance where we add an include for init.h covers off a case where that file was implicitly getting it from another header which itself didn't need it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-15powerpc: Add vr save/restore functionsAndreas Schwab
GCC 4.8 now generates out-of-line vr save/restore functions when optimizing for size. They are needed for the raid6 altivec support. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-01-14bgmac: propagate error codes in bgmac_probe()Florian Fainelli
bgmac_mii_register() and register_netdev() both return appropriate error codes for the failures they would encounter, propagate this error code instead of overriding the value with -ENOTSUPP which is not the correct error code to return. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14IPv6: move the anycast_src_echo_reply sysctl to netns_sysctl_ipv6FX Le Bail
This change move anycast_src_echo_reply sysctl with other ipv6 sysctls. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14sctp: remove a redundant NULL checkDan Carpenter
It confuses Smatch when we check "sinit" for NULL and then non-NULL and that causes a false positive warning later. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14tipc: spelling fixesstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ipv6: addrconf spelling fixesstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: avoid reference counter overflows on fib_rules in multicast forwardingHannes Frederic Sowa
Bob Falken reported that after 4G packets, multicast forwarding stopped working. This was because of a rule reference counter overflow which freed the rule as soon as the overflow happend. This patch solves this by adding the FIB_LOOKUP_NOREF flag to fib_rules_lookup calls. This is safe even from non-rcu locked sections as in this case the flag only implies not taking a reference to the rule, which we don't need at all. Rules only hold references to the namespace, which are guaranteed to be available during the call of the non-rcu protected function reg_vif_xmit because of the interface reference which itself holds a reference to the net namespace. Fixes: f0ad0860d01e47 ("ipv4: ipmr: support multiple tables") Fixes: d1db275dd3f6e4 ("ipv6: ip6mr: support multiple tables") Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Julian Anastasov <ja@ssi.bg> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14dm9601: add USB IDs for new dm96xx variantsPeter Korsgaard
A number of new dm96xx variants now exist. Reported-by: Joseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14mtd: nand: don't use {read,write}_buf for 8-bit transfersUwe Kleine-König
According to the Open NAND Flash Interface Specification (ONFI) Revision 3.1 "Parameters are always transferred on the lower 8-bits of the data bus." for the Get Features and Set Features commands. So using read_buf and write_buf is wrong for 16-bit wide nand chips as they use I/O[15:0]. The Get Features command is easily fixed using 4 times the read_byte callback. For Set Features implement a new overwritable callback "write_byte". Still I expect the default to work just fine for all controllers and making it overwriteable was just done for symmetry. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [Brian: fixed warning] Tested-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-14Merge branch 'atl_stats'David S. Miller
Sabrina Dubroca says: ==================== atheros: modify statistics code Following Ben Hutchings's advice on how to fill net_stats in alx [1], this patch modifies the other atheros ethernet drivers similarly. Minor whitespace/empty line changes in atl1c and atl1e to make the code completely consistent between atl1c, atl1e, and alx. I don't have this hardware, so these patches have only been compile-tested. v2 (changes only in atl1): - don't set soft_stats.rx_missed_errors (Ben) - add errors to soft_stats.{rx,tx}_packets (Ben) - add soft_stats.rx_dropped field and update soft_stats.rx_dropped instead of netdev->stats (overwritten) outside of the stats update function Detail of the changes (v1): * atl1/atl1c/atl1e - fix collisions computation - rx_dropped = rx_rrd_ov - rx_over_errors = 0 - rx_missed_errors = 0 - X_packets = X_ok + X_errors * only atl1c/atl1e - add rx_rxf_ov to rx_errors [1] http://www.spinics.net/lists/netdev/msg264930.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14atl1: update statistics codeSabrina Dubroca
As Ben Hutchings pointed out for the stats in alx, some hardware-specific stats aren't matched to the right net_device_stats field. Also fix the collision field and include errors in the total number of RX/TX packets. Add a rx_dropped field and use it where netdev->stats was modified directly out of the stats update function. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14atl1e: update statistics codeSabrina Dubroca
As Ben Hutchings pointed out for the stats in alx, some hardware-specific stats aren't matched to the right net_device_stats field. Also fix the collision field and include errors in the total number of RX/TX packets. Minor whitespace fixes to match the style in alx. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14atl1c: update statistics codeSabrina Dubroca
As Ben Hutchings pointed out for the stats in alx, some hardware-specific stats aren't matched to the right net_device_stats field. Also fix the collision field and include errors in the total number of RX/TX packets. Minor whitespace fixes to match the style in alx. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Spelling s/transmition/transmission/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: amd8111e: Spelling s/recive/receive/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14bnx2x: Correct default Tx switching behaviourYuval Mintz
With this patch bnx2x will configure the PF to perform Tx switching on out-going traffic as soon as SR-IOV is dynamically enabled and de-activate it when it is disabled. This will allow VFs to communicate with their parent PFs. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14MAINTAINERS: add virtio-dev ML for virtioMichael S. Tsirkin
Since virtio is an OASIS standard draft now, virtio implementation discussions are taking place on the virtio-dev OASIS mailing list. Update MAINTAINERS. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15PM / clock_ops: report clock errors from clk_enable()Ben Dooks
If clk_enable() fails, then print a message so that the user can see what is happening instead of silently failing to enable the clock. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-15PM / clock_ops: check return of clk_enable() in pm_clk_resume()Ben Dooks
The clk_enable() call in the pm_clk_resume() call returns an error that is not being checked. If clk_enable() fails then we should not set the state of the clock to PCE_STATUS_ENABLED. Note, the issue of warning the user if this fails has not been addressed in this patch as this is not the only place the driver calls clk_enable(). Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-15PM / clock_ops: fix up clk prepare/unprepare countBen Dooks
The drivers/base/power/clock_ops.c file is causing warnings from the clock driver (as shown below) due to failing to do a clk_prepare() call before enabling a clock. It also fails to check the balance of prepare/unprepare as __pm_clk_remove() do clk_disable_unprepare() call. This bug has probably been in since commit b2476490e ("clk: introduce the common clock framework") as the warning was part of the original commit. It is strange that it has not been noticed (although this has also been coupled with a failure for certain SH builds to not build the necessary glue to use this method of controlling the clocks). In summary, this is probably needed in several stable branches but need advice on which ones. On the Renesas Lager board, this causes numerous warnings of the following and even worse the clock system will not enable clocks, causing drivers that are in development to fail to work: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:883 __clk_enable+0x2c/0xa0() Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-14x86, cpu, amd: Add workaround for family 16h, erratum 793Borislav Petkov
This adds the workaround for erratum 793 as a precaution in case not every BIOS implements it. This addresses CVE-2013-6885. Erratum text: [Revision Guide for AMD Family 16h Models 00h-0Fh Processors, document 51810 Rev. 3.04 November 2013] 793 Specific Combination of Writes to Write Combined Memory Types and Locked Instructions May Cause Core Hang Description Under a highly specific and detailed set of internal timing conditions, a locked instruction may trigger a timing sequence whereby the write to a write combined memory type is not flushed, causing the locked instruction to stall indefinitely. Potential Effect on System Processor core hang. Suggested Workaround BIOS should set MSR C001_1020[15] = 1b. Fix Planned No fix planned [ hpa: updated description, fixed typo in MSR name ] Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20140114230711.GS29865@pd.tnic Tested-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-14Merge tag 'sirf-dts-for-3.14' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/dt ARM: sirf: dts update for 3.14 From Barry Song: some missed dt nodes or props for sirf dts for 3.14. Among them: - add lost clocks for cphifbg - add lost bus_width, clock and status for sdhci - add clock, frequence-voltage table for CPU0 - add lost minigpsrtc device node - add lost usp1_uart_nostreamctrl pin group for atlas6 - add pin group for USP0 with only RX or TX frame sync * tag 'sirf-dts-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14Merge tag 'socfpga-dt-for-3.14' of ↵Kevin Hilman
git://git.rocketboards.org/linux-socfpga-next into next/dt From Dinh Nguyen: SOCFPGA DT updates for v3.14 * tag 'socfpga-dt-for-3.14' of git://git.rocketboards.org/linux-socfpga-next: ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14Merge tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux into next/dtKevin Hilman
From Maxime Ripard: Second round of DT additions for 3.14 Mostly: - Addition of the missing PLLs and module clocks - Addition of the external clocks - Addition of the touchscreen controler - I2C nodes of the Cubietruck * tag 'sunxi-dt-for-3.14-2' of https://github.com/mripard/linux: arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ARM: sun4i: dt: Remove chosen nodes ARM: sun4i: dt: Move the aliases to the DTSI ARM: sunxi: dt: add nodes for the mbus clock ARM: sun7i: dt: mod0 clocks ARM: sun5i: dt: mod0 clocks ARM: sun4i: dt: mod0 clocks ARM: sunxi: add PLL5 and PLL6 support ARM: sunxi: add PLL4 support Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14PCI: Fix pci_check_and_unmask_intx() comment typosBjorn Helgaas
Fix typos in pci_check_and_unmask_intx() function comment. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14Merge tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91 into ↵Kevin Hilman
next/cleanup From Nicolas Ferre: Second cleanup pull-request for 3.14: - a tiny fix for the recent AT91 CCF implementation - the switch of one platform to DT with board file removal * tag 'at91-cleanup2' of git://github.com/at91linux/linux-at91: ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14ieee802154: Fix memory leak in ieee802154_add_iface()Christian Engelmayer
Fix a memory leak in the ieee802154_add_iface() error handling path. Detected by Coverity: CID 710490. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge tag 'versatile-for-v3.14' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc From Linus Walleij: Versatile patches for v3.14: - Move GPIO2 and GPIO3 to be registered from the core boardfile. - Update the defconfig. Defconfig changes: - Enable GPIOLIB and PL061 for the Versatile. - Build the Versatile using EABI. - Enable the new LEDs in the defconfig. * tag 'versatile-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: versatile: enable LEDs by default ARM: versatile: build using EABI ARM: versatile: enable GPIOLIB and PL061 by default ARM: versatile: update defconfig ARM: versatile: move GPIO2 and GPIO3 to core
2014-01-14PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()Alex Williamson
When doing a function/slot/bus reset PCI grabs the device_lock for each device to block things like suspend and driver probes, but call paths exist where this lock may already be held. This creates an opportunity for deadlock. For instance, vfio allows userspace to issue resets so long as it owns the device(s). If a driver unbind .remove callback races with userspace issuing a reset, we have a deadlock as userspace gets stuck waiting on device_lock while another thread has device_lock and waits for .remove to complete. To resolve this, we can make a version of the reset interfaces which use trylock. With this, we can safely attempt a reset and return error to userspace if there is contention. [bhelgaas: the deadlock happens when A (userspace) has a file descriptor for the device, and B waits in this path: driver_detach device_lock # take device_lock __device_release_driver pci_device_remove # pci_bus_type.remove vfio_pci_remove # pci_driver .remove vfio_del_group_dev wait_event(vfio.release_q, !vfio_dev_present) # wait (holding device_lock) Now B is stuck until A gives up the file descriptor. If A tries to acquire device_lock for any reason, we deadlock because A is waiting for B to release the lock, and B is waiting for A to release the file descriptor.] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-14Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== this is a pull request of three patches for net-next/master. Oleg Moroz added support for a new PCI card to the generic SJA1000 PCI driver, Guenter Roeck's patch limits the flexcan driver to little endian arm (and powerpc) and I fixed a sparse warning found by the kbuild robot in the ti_hecc driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge tag 'sunxi-core-for-3.14-2' of https://github.com/mripard/linux into ↵Kevin Hilman
next/soc From Maxime Ripard: Second round of core additions for the Allwinner SoCs Fixes to select missing configuration options, and update of the maintainer file. * tag 'sunxi-core-for-3.14-2' of https://github.com/mripard/linux: ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: sun6i: Add SMP support for the Allwinner A31 dt-bindings: fix example of allwinner interrupt controller ARM: sunxi: Register the A31 reset IP in init_time ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER reset: Add Allwinner SoCs Reset Controller Driver Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-14net: replace macros net_random and net_srandom with direct calls to prandomAruna-Hewapathirane
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14vfio-pci: Don't use device_lock around AER interrupt setupAlex Williamson
device_lock is much too prone to lockups. For instance if we have a pending .remove then device_lock is already held. If userspace attempts to modify AER signaling after that point, a deadlock occurs. eventfd setup/teardown is already protected in vfio with the igate mutex. AER is not a high performance interrupt, so we can also use the same mutex to protect signaling versus setup races. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-01-14ipv6: copy traffic class from ping request to replyHannes Frederic Sowa
Suggested-by: Simon Schneider <simon-schneider@gmx.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14ipv4: register igmp_notifier even when !CONFIG_PROC_FSWANG Cong
We still need this notifier even when we don't config PROC_FS. It should be rare to have a kernel without PROC_FS, so just for completeness. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge branch 'netdev_tracing'David S. Miller
Ben Hutchings says: ==================== Improve tracing at the driver/core boundary These patches add static tracpeoints at the driver/core boundary which record various skb fields likely to be useful for datapath debugging. On the TX side the boundary is where the core calls ndo_start_xmit, and on the RX side it is where any of the various exported receive functions is called. The set of skb fields is mostly based on what I thought would be interesting for sfc. These patches are basically the same as what I sent as an RFC in November, but rebased. They now depend on 'net: core: explicitly select a txq before doing l2 forwarding', so please merge net into net-next before trying to apply them. The first patch fixes a code formatting error left behind after that fix. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Add trace events for all receive entry points, exposing more skb fieldsBen Hutchings
The existing net/netif_rx and net/netif_receive_skb trace events provide little information about the skb, nor do they indicate how it entered the stack. Add trace events at entry of each of the exported functions, including most fields that are likely to be interesting for debugging driver datapath behaviour. Split netif_rx() and netif_receive_skb() so that internal calls are not traced. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Add net_dev_start_xmit trace event, exposing more skb fieldsBen Hutchings
The existing net/net_dev_xmit trace event provides little information about the skb that has been passed to the driver, and it is not simple to add more since the skb may already have been freed at the point the event is emitted. Add a separate trace event before the skb is passed to the driver, including most fields that are likely to be interesting for debugging driver datapath behaviour. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Fix indentation in dev_hard_start_xmit()Ben Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-01-14Merge branch 'skb_checksum_help'David S. Miller
Paul Durrant says: ==================== make skb_checksum_setup generally available Both xen-netfront and xen-netback need to be able to set up the partial checksum offset of an skb and may also need to recalculate the pseudo- header checksum in the process. This functionality is currently private and duplicated between the two drivers. Patch #1 of this series moves the implementation into the core network code as there is nothing xen-specific about it and it is potentially useful to any network driver. Patch #2 removes the private implementation from netback. Patch #3 removes the private implementation from netfront. v2: - Put skb_checksum_setup in skbuff.c rather than dev.c - remove inline ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14xen-netfront: use new skb_checksum_setup functionPaul Durrant
Use skb_checksum_setup to set up partial checksum offsets rather then a private implementation. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14xen-netback: use new skb_checksum_setup functionPaul Durrant
Use skb_checksum_setup to set up partial checksum offsets rather then a private implementation. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: add skb_checksum_setupPaul Durrant
This patch adds a function to set up the partial checksum offset for IP packets (and optionally re-calculate the pseudo-header checksum) into the core network code. The implementation was previously private and duplicated between xen-netback and xen-netfront, however it is not xen-specific and is potentially useful to any network driver. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 00:11:12 +0000