summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-22Blackfin: i2c-gpio boards: use GPIO_PF# definesMike Frysinger
Rather than use raw numbers for the GPIO pins, use proper GPIO defines. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: access_ok: permit L1 stackBarry Song
When apps run with their stack in L1, some system calls might be made where a buffer is in the stack as an argument. So make sure the core Blackfin access code does not reject this memory location. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf561-ezkit: add AD1836 codec resourcesBarry Song
This board has an AD1836 codec, so make sure we have the right resources declared for it. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: ptrace: enable access to L1 stacksBarry Song
If an app is placing its stack in L1 scratchpad SRAM, make sure ptrace is granted access to it so that gdb can do its thing. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: fix num_chipselect values for on-chip SPI busesMike Frysinger
The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: ad7160eval: new board portMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: re-use regulator framework with ad5398 partsSonic Zhang
We don't need our own header and structure to hook up the ad5398 part, so drop the custom resources for it. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: re-use the fixed regulator voltage driverSonic Zhang
Rather than write our own ADP switch driver, use the existing fixed regulator driver and rewrite the platform resources accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: SIC: BF537: change default data/error relative prioritiesMichael Hennerich
Some peripherals might generate an error interrupt shortly after the data interrupt due to the fact that the peripheral isn't serviced fast enough. In most cases this isn't a problem and is expected behavior. This hasn't been a problem on most parts since you simply don't request the error interrupt (or you leave it disabled while there is an expected state) and do the peripheral status checking in the data interrupt. The Blackfin SIC allows people to prioritize data and error interrupts, and the Blackfin CEC allows interrupts of equal or higher priority to nest. The current default settings gives error interrupts a higher priority than data interrupts. So if an error occurs while processing the data interrupt, it will be serviced immediately. However, the error interrupt on the BF537 SIC cannot be enabled on a per-peripheral basis. Once the error interrupt is enabled for one peripheral, it is automatically enabled for all peripherals. Therefore lower the default multiplexed error interrupt priority so most people need not worry themselves with this issue. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example IIO resourcesMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: use correct spi mode with ad2s90 partsBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example adau1373 i2c resourcesCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example adav801/3 resourcesYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: add example ad1937 i2c resourcesBarry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: fix NAND resourcesMike Frysinger
The NAND platform driver expects the registers to have a "mem" resource type rather than "io". Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: use proper irq flags with isp1362-hcdMichael Hennerich
With the recent kernel update the isp1362-hcd driver evaluates the IORESOURCE_IRQ resource flags and requests the irq with the given polarity/edge settings. However the ISP1362 config requires low level/edge interrupts. Most of the Blackfin boards use some random flag or no flag at all. Make all boards use a know good flag IORESOURCE_IRQ_LOWEDGE. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf561-acvilon: fix NAND resourcesValentin Yakovenkov
The NAND platform driver expects the registers to have a "mem" resource type rather than "io". Signed-off-by: Valentin Yakovenkov <yakovenkov@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: cm-bf548: add support for Socket CANMichael Hennerich
Add platform resources for the on-chip CAN peripheral so we can use it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22cfq-iosched: Fix a gcc 4.5 warning and put some commentsVivek Goyal
- Andi encountedred following warning with gcc 4.5 linux/block/cfq-iosched.c: In function ‘cfq_dispatch_requests’: linux/block/cfq-iosched.c:2156:3: warning: array subscript is above array bounds - Warning happens due to following code. slice = group_slice * count / max_t(unsigned, cfqg->busy_queues_avg[cfqd->serving_prio], cfq_group_busy_queues_wl(cfqd->serving_prio, cfqd, cfqg)); gcc is complaining about cfqg->busy_queues_avg[] being indexed by CFQ prio classes (RT, BE and IDLE) while the array size is only 2. - At run time, we never access cfqg->busy_queues_avg[IDLE] and return from function before this code hits. - To fix warning increase the array size though it will remain unused. This patch also puts some comments to clarify some of the confusions. - I have taken Jens's patch and modified it a bit. - Compile tested with gcc 4.4 and boot tested. I don't have gcc 4.5 running, Andi can you please test it with gcc 4.5 to make sure it worked. Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-22Blackfin: boards: update AD183x resourcesBarry Song
Make sure we use the right Kconfig names and platform strings. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf537-stamp: update GPIO CS devicesBarry Song
Now that we've rewritten the GPIO CS handling in the Blackfin SPI peripheral, we need to update the platform resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: punt short SPI MMR bit namesMike Frysinger
Now that the common header defines everything and the SPI drivers are using it, we can drop these duplicated global namespace polluters. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISAThorsten Glaser
On m68k, I/O macros like inb() outw() etc. are only defined to something useful if CONFIG_ISA is set; dummies are in place if not, but four macros were missing from the !CONFIG_ISA case. Adding these makes some drivers, such as speakup, compile again. Signed-off-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k: Remove big kernel lock in cache flush codeGeert Uytterhoeven
The cache flush code doesn't need a lock, so we can remove the use of the BKL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Andreas Schwab <schwab@linux-m68k.org>
2010-10-22m68k: __pa(): cast arg to longAndrew Morton
Fixes this: drivers/char/mem.c: In function 'mmap_kmem': drivers/char/mem.c:342: warning: cast to pointer from integer of different size by doing what other archtiectures do. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22fbdev: atafb - Remove undead ifdef ATAFB_FALCONChristian Dietrich
The ATAFB_FALCON ifdef isn't necessary at this point, because it is checked in an outer ifdef level already and has no effect here. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22zorro: Fix device_register() error handlingVasiliy Kulikov
If device_register() fails then call put_device(). See comment to device_register. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22fbdev/m68k: Fix section mismatches in q40fb.cHenrik Kretzschmar
This patch moves the q40_fix and q40_var structures from .init.data to .devinit.data. This is where now the probe function resides, which only uses them. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: merge the MMU and non-MMU traps.hGreg Ungerer
The MMU and non-MMU versions of traps.h are virtually identical, merge them into a single file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: merge MMU and non-MMU thread_info.hGreg Ungerer
The MMU and non-MMU versions of thread_info.h are quite similar. Merge the two files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: merge MMU and non-MMU atomic.hGreg Ungerer
The only difference between the MMU and non-MMU versions of atomic.h is some extra support needed by ColdFire family processors. So merge this into the MMU version of atomic.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: clean up page.hGreg Ungerer
There is a lot of common defines in the MMU and non-MMU variants of page.h. Factor out the common stuff into the master page.h. It still includes the underlying page_mm.h or page_no.h, but they only contain the real differences now. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: merge machdep.h files into a single fileGreg Ungerer
No need to have separate machdep.h files for each of the MMU and non-MMU cases. Merge them all into a single file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: merge MMU and non-MMU string.hGreg Ungerer
The MMU and non-MMU string.h varients (string_no.h and string_mm.h) and almost the same. Switch to using the string_mm.h one, merging in the necessary ColdFire support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k/m68knommu: Remove dead SMP config optionChristian Dietrich
CONFIG_SMP doesn't exist in Kconfig (for this architecure), therefore remove all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k: move definition of THREAD_SIZE into thread_info_mm.hGreg Ungerer
Move the definition of THREAD_SIZE from page_mm.h to thread_info_mm.h This logically associates it with the other thread definitions, and will make it easier to merge the MMU and non-MMU versions of page.h and thread_info.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k: Use asm-generic/ioctls.h (enables termiox)Jeff Mahoney
This patch converts m68k to use asm-generic/ioctls.h instead of its own version. The differences between the arch-specific version and the generic version are as follows: - m68k defines its own value for FIOQSIZE, asm-generic/ioctls.h keeps it - The generic version adds TIOCSRS485 and TIOCGRS485m which are unused by any driver available on this architecture. - The generic version adds support for termiox Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22m68k: Remove dead GG2 config optionChristian Dietrich
CONFIG_GG2 doesn't exist in Kconfig, therefore remove all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-22pcmcia: IOCARD is also required for using IRQsDominik Brodowski
Dave Hinds pointed out to me that 37979e1546a7 will break b43 and ray_cs, as IOCARD is not -- as the name would suggest -- only needed for cards using IO ports. Instead, as it re-deines several pins, it is also required for using interrupts. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits) powerpc/44x: Update ppc44x_defconfig powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option fsl_rio: Add comments for sRIO registers. powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig powerpc/fsl-booke: Add p5020 DS board support powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes powerpc/fsl-booke: Add support for FSL 64-bit e5500 core powerpc/85xx: add cache-sram support powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board powerpc: Fix compile error with paca code on ppc64e powerpc/fsl-booke: Add p3041 DS board support oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt. powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers powerpc/fsl_booke: Add support to boot from core other than 0 powerpc/p1022: Add probing for individual DMA channels powerpc/fsl_soc: Search all global-utilities nodes for rstccr powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT powerpc/mpc83xx: Support for MPC8308 P1M board ... Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c
2010-10-21bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.Jesse Gross
Some cards don't support changing vlan offloading settings. Make Ethtool set_flags return -EINVAL in those cases. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Calling vlan_hwaccel_do_receive() is always valid.Jesse Gross
It is now acceptable to receive vlan tagged packets at any time, even if CONFIG_VLAN_8021Q is not set. This means that calling vlan_hwaccel_do_receive() should not result in BUG() but rather just behave as if there were no vlan devices configured. Reported-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (26 commits) include/linux/libata.h: fix typo pata_bf54x: fix return type of bfin_set_devctl Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y libahci: fix result_tf handling after an ATA PIO data-in command pata_sl82c105: implement sff_irq_check() method pata_sil680: implement sff_irq_check() method pata_pdc202xx_old: implement sff_irq_check() method pata_cmd640: implement sff_irq_check() method ata_piix: Add device ID for ICH4-L pata_sil680: make sil680_sff_exec_command() 'static' ata: Intel IDE-R support libata: reorder ata_queued_cmd to remove alignment padding on 64 bit builds libata: Signal that our SATL supports WRITE SAME(16) with UNMAP ata_piix: remove SIDPR locking libata: implement cross-port EH exclusion libata: add @ap to ata_wait_register() and introduce ata_msleep() ata_piix: implement LPM support libata: implement LPM support for port multipliers libata: reimplement link power management libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global ...
2010-10-21Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (48 commits) ocfs2: Avoid to evaluate xattr block flags again. ocfs2/cluster: Release debugfs file elapsed_time_in_ms ocfs2: Add a mount option "coherency=*" to handle cluster coherency for O_DIRECT writes. Initialize max_slots early When I tried to compile I got the following warning: fs/ocfs2/slot_map.c: In function ‘ocfs2_init_slot_info’: fs/ocfs2/slot_map.c:360: warning: ‘bytes’ may be used uninitialized in this function fs/ocfs2/slot_map.c:360: note: ‘bytes’ was declared here Compiler: gcc version 4.4.3 (GCC) on Mandriva I'm not sure why this warning occurs, I think compiler don't know that variable "bytes" is initialized when it is sent by reference to ocfs2_slot_map_physical_size and it throws that ugly warning. However, a simple initialization of "bytes" variable with 0 will fix it. ocfs2: validate bg_free_bits_count after update ocfs2/cluster: Bump up dlm protocol to version 1.1 ocfs2/cluster: Show per region heartbeat elapsed time ocfs2/cluster: Add mlogs for heartbeat up/down events ocfs2/cluster: Create debugfs dir/files for each region ocfs2/cluster: Create debugfs files for live, quorum and failed region bitmaps ocfs2/cluster: Maintain bitmap of failed regions ocfs2/cluster: Maintain bitmap of quorum regions ocfs2/cluster: Track bitmap of live heartbeat regions ocfs2/cluster: Track number of global heartbeat regions ocfs2/cluster: Maintain live node bitmap per heartbeat region ocfs2/cluster: Reorganize o2hb debugfs init ocfs2/cluster: Check slots for unconfigured live nodes ocfs2/cluster: Print messages when adding/removing nodes ocfs2/cluster: Print messages when adding/removing heartbeat regions ...
2010-10-21Merge branch 'core-memblock-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits) x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S xen: Cope with unmapped pages when initializing kernel pagetable memblock, bootmem: Round pfn properly for memory and reserved regions memblock: Annotate memblock functions with __init_memblock memblock: Allow memblock_init to be called early memblock/arm: Fix memblock_region_is_memory() typo x86, memblock: Remove __memblock_x86_find_in_range_size() memblock: Fix wraparound in find_region() x86-32, memblock: Make add_highpages honor early reserved ranges x86, memblock: Fix crashkernel allocation arm, memblock: Fix the sparsemem build memblock: Fix section mismatch warnings powerpc, memblock: Fix memblock API change fallout memblock, microblaze: Fix memblock API change fallout x86: Remove old bootmem code x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve x86: Remove not used early_res code x86, memblock: Replace e820_/_early string with memblock_ x86: Use memblock to replace early_res x86, memblock: Use memblock_debug to control debug message print out ... Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
2010-10-21include/linux/libata.h: fix typoAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_bf54x: fix return type of bfin_set_devctlMike Frysinger
The new devctl func added for us to the driver has the wrong return type. Which is to say there shouldn't be any. This fixes compile time warnings as there shouldn't be any runtime difference. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21Drivers: ata: Makefile: replace the use of <module>-objs with <module>-yTracey Dent
Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libahci: fix result_tf handling after an ATA PIO data-in commandTejun Heo
ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in command. The host is supposed to take the TF and E_Status of the preceding PIO Setup FIS. Update ahci_qc_fill_rtf() such that it takes TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in command. Without this patch, result_tf for such a command is filled with the content of the previous D2H Reg FIS which belongs to a previous command, which can make the command incorrectly seen as failed. * Patch updated to grab the whole TF + E_Status from PIO Setup FIS instead of just E_Status as suggested by Robert Hancock. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mark Lord <kernel@teksavvy.com> Cc: Robert Hancock <hancockrwd@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_sl82c105: implement sff_irq_check() methodSergei Shtylyov
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:07:22 +0000