summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-14mfd: intel-lpss: Add Intel Comet Lake PCI IDsAndy Shevchenko
Intel Comet Lake has the same LPSS than Intel Cannon Lake. Add the new IDs to the list of supported devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Evan Green <evgreen@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: lochnagar: Add links to binding docs for sound and hwmonCharles Keepax
Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Add links to the binding documents for the new sound and hardware monitor parts of the driver. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: ab8500-debugfs: Fix a typo ("deubgfs")Jonathan Neuschäfer
"debugfs" was misspelled. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: imx6sx: Add MQS register definition for iomuxc gprS.j. Wang
Add macros to define masks and bits for imx6sx MQS registers Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: LMU: Fix lm3632 dt binding exampleDan Murphy
Fix the lm3632 dt binding examples as the LCM enable GPIOs are defined as enable GPIOs per the regulator/lm363x-regulator.txt bindings document. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel_quark_i2c_gpio: Adjust IOT2000 matchingSu Bao Cheng
Since there are more IOT2040 variants with identical hardware but different asset tags, the asset tag matching should be adjusted to support them. For the board name "SIMATIC IOT2000", currently there are 2 types of hardware, IOT2020 and IOT2040. Both are identical regarding the intel_quark_i2c_gpio. In the future there will be no other devices with the "SIMATIC IOT2000" DMI board name but different hardware. So remove the asset tag matching from this driver. Signed-off-by: Su Bao Cheng <baocheng.su@siemens.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63LSteve Twiss
Mismatch between what is found in the Datasheets for DA9063 and DA9063L provided by Dialog Semiconductor, and the register names provided in the MFD registers file. The changes are for the OTP (one-time-programming) control registers. The two naming errors are OPT instead of OTP, and COUNT instead of CONT (i.e. control). Cc: Stable <stable@vger.kernel.org> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: tps65912-spi: Add missing of table registrationDaniel Gomez
MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: spi:tps65912 After this patch: modinfo drivers/mfd/tps65912-spi.ko | grep alias alias: of:N*T*Cti,tps65912C* alias: of:N*T*Cti,tps65912 alias: spi:tps65912 Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Add USB power supply mfd cell to AXP803Chen-Yu Tsai
The AXP803 has a VBUS power input. Its functionality is the same as the one found in the AXP813. Now that the axp20x_usb_power driver supports this variant, we can add an mfd cell for it to use it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sun6i-prcm: Fix build warning for non-OF configurationsArnd Bergmann
When CONFIG_OF is disabled, we get a harmless warning about an unused variable: drivers/mfd/sun6i-prcm.c: In function 'sun6i_prcm_probe': drivers/mfd/sun6i-prcm.c:151:22: error: unused variable 'np' [-Werror=unused-variable] Remove the variable and open-code the value in the only place it is used, so it can get left out as well without CONFIG_OF. Fixes: a05a2e7998ab ("mfd: sun6i-prcm: Allow to compile with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel-lpss: Set the device in reset state when initBinbin Wu
In virtualized setup, when system reboots due to warm reset interrupt storm is seen. Call Trace: <IRQ> dump_stack+0x70/0xa5 __report_bad_irq+0x2e/0xc0 note_interrupt+0x248/0x290 ? add_interrupt_randomness+0x30/0x220 handle_irq_event_percpu+0x54/0x80 handle_irq_event+0x39/0x60 handle_fasteoi_irq+0x91/0x150 handle_irq+0x108/0x180 do_IRQ+0x52/0xf0 common_interrupt+0xf/0xf </IRQ> RIP: 0033:0x76fc2cfabc1d Code: 24 28 bf 03 00 00 00 31 c0 48 8d 35 63 77 0e 00 48 8d 15 2e 94 0e 00 4c 89 f9 49 89 d9 4c 89 d3 e8 b8 e2 01 00 48 8b 54 24 18 <48> 89 ef 48 89 de 4c 89 e1 e8 d5 97 01 00 84 c0 74 2d 48 8b 04 24 RSP: 002b:00007ffd247c1fc0 EFLAGS: 00000293 ORIG_RAX: ffffffffffffffda RAX: 0000000000000000 RBX: 00007ffd247c1ff0 RCX: 000000000003d3ce RDX: 0000000000000000 RSI: 00007ffd247c1ff0 RDI: 000076fc2cbb6010 RBP: 000076fc2cded010 R08: 00007ffd247c2210 R09: 00007ffd247c22a0 R10: 000076fc29465470 R11: 0000000000000000 R12: 00007ffd247c1fc0 R13: 000076fc2ce8e470 R14: 000076fc27ec9960 R15: 0000000000000414 handlers: [<000000000d3fa913>] idma64_irq Disabling IRQ #27 To avoid interrupt storm, set the device in reset state before bringing out the device from reset state. Changelog v2: - correct the subject line by adding "mfd: " Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14platform/chrome: Add support for v1 of host sleep eventEvan Green
Add support in code for the new forms of the host sleep event. Detects the presence of this version of the command at runtime, and use whichever form the EC supports. At this time, always request the default timeout, and only report the failing response via a WARN_ONCE(). Future versions could accept the sleep parameter from outside the driver, and return the response information to usermode or elsewhere. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rajat Jain <rajatja@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Add host_sleep_event_v1 commandEvan Green
Introduce the command and response structures for the second revision of the host sleep event. These structures are part of a new EC change that enables detection of failure to enter S0ix. The EC waits a kernel-specified timeout (or a default amount of time) for the S0_SLP pin to change, and wakes the system if that change does not occur in time. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rajat Jain <rajatja@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate the CrOS USB PD logger driverEnric Balletbo i Serra
Add the cros-usbpd-logger driver for logging event data for the USB PD charger available in the Embedded Controller on ChromeOS systems. The logging feature is logically separate functionality from charge manager, hence is instantiated as a different driver. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenetr Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cs47l90: Make DAC_AEC_CONTROL_2 readableAjit Pandey
There is a second AEC loopback on cs47l90 so the registers for it should be readable. Signed-off-by: Ajit Pandey <ajit.pandey@cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cs47l35: Make DAC_AEC_CONTROL_2 readableRichard Fitzgerald
There is a second AEC loopback on cs47l35 so the registers for it should be readable. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: syscon: atmel: Switch to SPDX license identifiersTudor Ambarus
Adopt the SPDX license identifiers to ease license compliance management. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: da9063: Remove platform_data supportWolfram Sang
There are no in-kernel users anymore, so remove this outdated interface. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: da9063: Convert headers to SPDXWolfram Sang
Covnert the headers of the source and include files to SPDX. And fix some typos in the descriptions ("interrupt" instead of "I2C"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Allow the AXP223 to be probed by I2CMaxime Ripard
The AXP223 can be used both using the RSB proprietary bus, or a more traditional I2C bus. The RSB is a faster bus and provides more features (like some integrity checks on the messages), so it's usually preferrable to use it, but since it's proprietary, when we want to use the PMIC in a multi-master setup, the i2c might make sense as well. Let's add that possibility. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: rk808: Remove the id_tableTony Xie
Remove the id_table because it's not used. Signed-off-by: Tony Xie <tony.xie@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: cros_ec: Instantiate properly CrOS ISH MCU deviceRushikesh S Kadam
Integrated Sensor Hub (ISH) is also a MCU running EC having feature bit EC_FEATURE_ISH. Instantiate it as a special CrOS EC device with device name 'cros_ish'. Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: mfd: Add bindings for SAM9X60 HLCD controllerClaudiu Beznea
Add new compatible string for the HLCD controller on SAM9X60 SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: atmel-hlcdc: Add compatible for SAM9X60 HLCD controllerClaudiu Beznea
Add compatible for SAM9X60 HLCD controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: Kconfig: Pedantic formattingEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: axp20x: Add USB power supply mfd cell to AXP813Quentin Schulz
The AXP813 has a VBUS power input. Now that the axp20x_usb_power driver supports this variant, we can add an mfd cell for it to use it. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> [wens@csie.org: add commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: twl6040: Fix device init errors for ACCCTL registerTony Lindgren
I noticed that we can get a -EREMOTEIO errors on at least omap4 duovero: twl6040 0-004b: Failed to write 2d = 19: -121 And then any following register access will produce errors. There 2d offset above is register ACCCTL that gets written on twl6040 powerup. With error checking added to the related regcache_sync() call, the -EREMOTEIO error is reproducable on twl6040 powerup at least duovero. To fix the error, we need to wait until twl6040 is accessible after the powerup. Based on tests on omap4 duovero, we need to wait over 8ms after powerup before register write will complete without failures. Let's also make sure we warn about possible errors too. Note that we have twl6040_patch[] reg_sequence with the ACCCTL register configuration and regcache_sync() will write the new value to ACCCTL. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: syscon: Add optional clock supportFabrice Gasnier
Some system control registers need to be clocked, so the registers can be accessed. Add an optional clock and attach it to regmap. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14dt-bindings: stm32: syscon: Add clock supportFabrice Gasnier
STM32 system configuration controller registers needs to be clocked. Document clock support on stm32-syscon. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sec: Add support for the RTC on S2MPA01Stuart Menefy
The RTC portion of the S2MPA01 appears to have the same register layout as the S2MPS14. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: sec: Put one element structure initialisation on one lineStuart Menefy
Change the layout of the initialisation of structures with one element to a single line of code. This keeps the coding style consistent. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14mfd: intel_soc_pmic_chtwc: Register LED child deviceYauhen Kharuzhy
Add MFD cell for LEDs driver to the Intel Cherry Trail Whiskey Cove PMIC mfd device driver. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-05-14Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones
'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
2019-05-13Merge branch 'pci/trivial'Bjorn Helgaas
- Cleanup PCI register definitions, typos, etc (Bjorn Helgaas) - Remove unnecessary use of user-space types in CPER (Bjorn Helgaas) - Cleanup setup-bus.c comments & whitespace (Nicholas Johnson) * pci/trivial: PCI: Cleanup setup-bus.c comments and whitespace CPER: Remove unnecessary use of user-space types CPER: Add UEFI spec references PCI: Fix comment typos PCI: Cleanup register definition width and whitespace # Conflicts: # drivers/pci/pci.c # drivers/pci/setup-bus.c
2019-05-13Merge branch 'pci/printk-portdrv'Bjorn Helgaas
- Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR (Frederick Lawler) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) * pci/printk-portdrv: PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
2019-05-13Merge branch 'pci/printk'Bjorn Helgaas
* pci/printk: PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible
2019-05-13Merge branch 'pci/iova-dma-ranges'Bjorn Helgaas
- Add list of legal DMA address ranges to PCI host bridge (Srinath Mannam) - Reserve inaccessible DMA ranges so IOMMU doesn't allocate them (Srinath Mannam) - Parse iProc DT dma-ranges to learn what PCI devices can reach via DMA (Srinath Mannam) * pci/iova-dma-ranges: PCI: iproc: Add sorted dma ranges resource entries to host bridge iommu/dma: Reserve IOVA for PCIe inaccessible DMA address PCI: Add dma_ranges window list # Conflicts: # drivers/pci/probe.c
2019-05-13Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas
- Exit pcitest with error code when test fails (Jean-Jacques Hiblot) - Fix leaked of_node references in dra7xx, uniphier, layerscape, rockchip, aardvark, iproc, mediatek, rpadlpar (Wen Yang) - Fix pcitest "help" option parsing (Kishon Vijay Abraham I) - Fix Makefile bug that inadvertently removes pcitest.sh (Kishon Vijay Abraham I) - Check for alloc_workqueue() failure in endpoint test driver (Kangjie Lu) * remotes/lorenzo/pci/misc: PCI: endpoint: Fix a potential NULL pointer dereference tools: PCI: Handle pcitest.sh independently from pcitest tools: PCI: Add 'h' in optstring of getopt() PCI: mediatek: Fix a leaked reference by adding missing of_node_put() PCI: iproc: Fix a leaked reference by adding missing of_node_put() PCI: aardvark: Fix a leaked reference by adding missing of_node_put() PCI: rockchip: Fix a leaked reference by adding missing of_node_put() PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put() PCI: uniphier: Fix a leaked reference by adding missing of_node_put() PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put() tools: PCI: Exit with error code when test fails
2019-05-13Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas
- Check for __get_free_pages() failure in xilinx (Kangjie Lu) * remotes/lorenzo/pci/xilinx: PCI: xilinx: Check for __get_free_pages() failure
2019-05-13Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas
- Use DMA-API to get tegra MSI address to prevent device DMA from generating unwanted MSIs (Vidya Sagar) * remotes/lorenzo/pci/tegra: PCI: tegra: Use the DMA-API to get the MSI address
2019-05-13Merge branch 'remotes/lorenzo/pci/rockchip'Bjorn Helgaas
- Fix rockchip bitwise operations that overflow type (Colin Ian King) * remotes/lorenzo/pci/rockchip: PCI: rockchip: Fix rockchip_pcie_ep_assert_intx() bitwise operations
2019-05-13Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas
- Use BIT() when appropriate in rcar (Marek Vasut) - Use u32 to match rcar hardware register widths (Marek Vasut) - Use BITS_PER_BYTE when appropriate in rcar (Marek Vasut) - Remove unnecessary casts in rcar (Marek Vasut) - Fix 64-bit MSI target addresses in rcar (Marek Vasut) - Check for __get_free_pages() failure in rcar (Kangjie Lu) - Fix shadowed rcar "irq" variable (Wolfram Sang) * remotes/lorenzo/pci/rcar: PCI: rcar: Do not shadow the 'irq' variable PCI: rcar: Fix a potential NULL pointer dereference PCI: rcar: Fix 64bit MSI message address handling PCI: rcar: Clean up debug messages PCI: rcar: Replace (8 * n) with (BITS_PER_BYTE * n) PCI: rcar: Replace various variable types with unsigned ones for register values PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors PCI: rcar: Clean up remaining macros defining bits # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-05-13Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas
- Make mediatek clocks optional, not required (Chunfeng Yun) - Remove unused mediatek mt2712 "num-lanes" DT property (Honghui Zhang) * remotes/lorenzo/pci/mediatek: arm64: dts: mt2712: Remove un-used property for PCIe PCI: mediatek: Get optional clocks with devm_clk_get_optional()
2019-05-13Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas
- Move IRQ register address computation inside macros (Kishon Vijay Abraham I) - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I) - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham I) - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon Vijay Abraham I) - Add dwc support for platforms with custom MSI controllers (Kishon Vijay Abraham I) - Add keystone-specific MSI controller (Kishon Vijay Abraham I) - Remove dwc host_ops previously used for keystone-specific MSI (Kishon Vijay Abraham I) - Skip dwc default MSI init if platform has custom MSI controller (Kishon Vijay Abraham I) - Implement .start_link() and .stop_link() for keystone endpoint support (Kishon Vijay Abraham I) - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I) - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon Vijay Abraham I) - Get keystone register resources from DT by name, not index (Kishon Vijay Abraham I) - Get DT resources in .probe() to prepare for endpoint support (Kishon Vijay Abraham I) - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration (Kishon Vijay Abraham I) - Explicitly set keystone to host mode (Kishon Vijay Abraham I) - Document DT "atu" reg-names requirement for DesignWare core >= 4.80 (Kishon Vijay Abraham I) - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon Vijay Abraham I) - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon Vijay Abraham I) - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham I) - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham I) - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I) - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I) - Make of_pci_get_max_link_speed() available to endpoint drivers as well as host drivers (Kishon Vijay Abraham I) - Add keystone support for DT "max-link-speed" property (Kishon Vijay Abraham I) - Add endpoint library support for BAR buffer alignment (Kishon Vijay Abraham I) - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I) - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay Abraham I) - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon Vijay Abraham I) - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay Abraham I) - Configure designware endpoints to advertise smallest resizable BAR (1MB) (Kishon Vijay Abraham I) - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay Abraham I) - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I) - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test misc: pci_endpoint_test: Add support to test PCI EP in AM654x PCI: designware-ep: Use aligned ATU window for raising MSI interrupts PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size PCI: keystone: Add support for PCIe EP in AM654x Platforms dt-bindings: PCI: Add PCI EP DT binding documentation for AM654 PCI: dwc: Add callbacks for accessing dbi2 address space PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: keystone: Add support to set the max link speed from DT PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers PCI: keystone: Invoke phy_reset() API before enabling PHY PCI: keystone: Add support for PCIe RC in AM654x Platforms dt-bindings: PCI: Add PCI RC DT binding documentation for AM654 PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 PCI: dwc: Fix ATU identification for designware version >= 4.80 PCI: dwc: Enable iATU unroll for endpoint too dt-bindings: PCI: Document "atu" reg-names PCI: keystone: Explicitly set the PCIe mode dt-bindings: PCI: Add dt-binding to configure PCIe mode PCI: keystone: Move resources initialization to prepare for EP support PCI: keystone: Use platform_get_resource_byname() to get memory resources PCI: keystone: Perform host initialization in a single function dt-bindings: PCI: keystone: Add "reg-names" binding information PCI: keystone: Cleanup error_irq configuration PCI: keystone: Add start_link()/stop_link() dw_pcie_ops PCI: dwc: Remove default MSI initialization for platform specific MSI chips PCI: dwc: Remove Keystone specific dw_pcie_host_ops PCI: keystone: Use Keystone specific msi_irq_chip PCI: dwc: Add support to use non default msi_irq_chip PCI: keystone: Cleanup ks_pcie_msi_irq_handler() PCI: keystone: Use hwirq to get the MSI IRQ number offset PCI: keystone: Add separate functions for configuring MSI and legacy interrupt PCI: keystone: Cleanup interrupt related macros # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h
2019-05-13Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas
- Work around iproc CRS completion issues (Srinath Mannam) - Allow smaller iproc outbound windows so driver can work on 32-bit systems (Srinath Mannam) - Use iproc-specific config read for PAXBv2 (not PAXB) (Srinath Mannam) * remotes/lorenzo/pci/iproc: PCI: iproc: Enable iProc config read for PAXBv2 PCI: iproc: Allow outbound configuration for 32-bit I/O region PCI: iproc: Add CRS check in config read
2019-05-13Merge branch 'remotes/lorenzo/pci/imx'Bjorn Helgaas
- Simplify imx7d_pcie_wait_for_phy_pll_lock() by using regmap_read_poll_timeout() (Andrey Smirnov) - Drop imx6_pcie_wait_for_link() in favor of the more generic dw_pcie_wait_for_link() (Andrey Smirnov) - Return -ETIMEDOUT instead of -EINVAL from imx6_pcie_wait_for_speed_change() (Andrey Smirnov) - Remove unused PCIE_PL_PFLR_* constants from imx6 (Andrey Smirnov) - Use shared PHY debug register definitions in imx6 (Andrey Smirnov) - Use BIT() in imx6 (Andrey Smirnov) - Simplify imx6 PHY bit operations (Andrey Smirnov) - Simplify imx6 pcie_phy_poll_ack() (Andrey Smirnov) - Use data types that match actual imx6 PHY register width (Andrey Smirnov) - Mark imx6 suspend support with drvdata flags instead of checking variants (Andrey Smirnov) - Sleep instead of delay in imx6_pcie_enable_ref_clk() (Andrey Smirnov) * remotes/lorenzo/pci/imx: PCI: imx6: Use usleep_range() in imx6_pcie_enable_ref_clk() PCI: imx6: Use flags to indicate support for suspend PCI: imx6: Restrict PHY register data to 16-bit PCI: imx6: Simplify pcie_phy_poll_ack() PCI: imx6: Simplify bit operations in PHY functions PCI: imx6: Make use of BIT() in constant definitions PCI: dwc: imx6: Share PHY debug register definitions PCI: imx6: Remove PCIE_PL_PFLR_* constants PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change() PCI: imx6: Drop imx6_pcie_wait_for_link() PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock()
2019-05-13Merge branch 'pci/dwc'Bjorn Helgaas
- Use generic config space reader in qcom (Marc Gonzalez) - Stop calling IRQ handler cleanup in dwc driver for invalid MSI IRQs (Jisheng Zhang) - Free dwc MSI target page when freeing MSI (Jisheng Zhang) - Fix dwc MSI leak in host init error path (Jisheng Zhang) - Use managed host bridge alloc to simplify dwc (Jisheng Zhang) - Save dwc root pci_bus pointer for use by .remove() methods (Jisheng Zhang) - Allow imx6 asynchronous probing (Lucas Stach) * pci/dwc: PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() PCI: dwc: Fix dw_pcie_free_msi() if msi_irq is invalid PCI: qcom: Use default config space read function
2019-05-13Merge branch 'remotes/lorenzo/pci/controller-fixes'Bjorn Helgaas
- Restore R-Car PCIe link early in resume (Kazufumi Ikeda) - Fix Hyper-V PCI ejection memory leak (Dexuan Cui) - Cleanup Hyper-V PCI slots on module unload (Dexuan Cui) - Cleanup Hyper-V PCI slot on device removal to address a race (Dexuan Cui) * remotes/lorenzo/pci/controller-fixes: PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary PCI: hv: Add hv_pci_remove_slots() when we unload the driver PCI: hv: Fix a memory leak in hv_eject_device_work() PCI: rcar: Add the initialization of PCIe link in resume_noirq()
2019-05-13Merge branch 'pci/host/al'Bjorn Helgaas
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) * pci/host/al: PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
2019-05-13Merge branch 'pci/virtualization'Bjorn Helgaas
- Mark ATS on AMD Stoney Radeon R7 GPU broken to avoid IOMMU issues (Nikolai Kostrigin) - Mark Atheros AR9462 to avoid bus reset that locks up host machine (James Prestwood) * pci/virtualization: PCI: Mark Atheros AR9462 to avoid bus reset PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken
generated by cgit (git 2.34.1) at 2025-09-13 03:04:30 +0000