summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-15Merge branch 'stmmac-Fix-selftests-in-Synopsys-AXS101-board'David S. Miller
Jose Abreu says: ==================== net: stmmac: Fix selftests in Synopsys AXS101 board Set of fixes for sefltests so that they work in Synopsys AXS101 board. Final output: $ ethtool -t eth0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters 0 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control -95 10. RSS -95 11. VLAN Filtering -95 12. VLAN Filtering (perf) -95 13. Double VLAN Filter -95 14. Double VLAN Filter (perf) -95 15. Flexible RX Parser -95 16. SA Insertion (desc) -95 17. SA Replacement (desc) -95 18. SA Insertion (reg) -95 19. SA Replacement (reg) -95 20. VLAN TX Insertion -95 21. SVLAN TX Insertion -95 22. L3 DA Filtering -95 23. L3 SA Filtering -95 24. L4 DA TCP Filtering -95 25. L4 SA TCP Filtering -95 26. L4 DA UDP Filtering -95 27. L4 SA UDP Filtering -95 28. ARP Offload -95 29. Jumbo Frame 0 30. Multichannel Jumbo -95 31. Split Header -95 Description: 1) Fixes the unaligned accesses that caused CPU halt in Synopsys AXS101 boards. 2) Fixes the VLAN tests when filtering failed to work. 3) Fixes the VLAN Perfect tests when filtering is not available in HW. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: stmmac: selftests: Guard VLAN Perfect test against non supported HWJose Abreu
When HW does not support perfect filtering the feature will not be enabled in the net_device. Add a check for this to prevent failures. Fixes: 1b2250a04c1f ("net: stmmac: selftests: Add tests for VLAN Perfect Filtering") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: stmmac: selftests: Mark as fail when received VLAN ID != expectedJose Abreu
When the VLAN ID does not match the expected one it means filter failed in HW. Fix it. Fixes: 94e18382003c ("net: stmmac: selftests: Add selftest for VLAN TX Offload") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: stmmac: selftests: Make it work in Synopsys AXS101 boardsJose Abreu
Synopsys AXS101 boards do not support unaligned memory loads or stores. Change the selftests mechanism to explicity: - Not add extra alignment in TX SKB - Use the unaligned version of ether_addr_equal() Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_infoColin Ian King
Array utdm_info is declared as an array of MAX_HDLC_NUM (4) elements however up to UCC_MAX_NUM (8) elements are potentially being written to it. Currently we have an array out-of-bounds write error on the last 4 elements. Fix this by making utdm_info UCC_MAX_NUM elements in size. Addresses-Coverity: ("Out-of-bounds write") Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15drm/dp_mst: Have DP_Tx send one msg at a timeWayne Lin
[Why] Noticed this while testing MST with the 4 ports MST hub from StarTech.com. Sometimes can't light up monitors normally and get the error message as 'sideband msg build failed'. Look into aux transactions, found out that source sometimes will send out another down request before receiving the down reply of the previous down request. On the other hand, in drm_dp_get_one_sb_msg(), current code doesn't handle the interleaved replies case. Hence, source can't build up message completely and can't light up monitors. [How] For good compatibility, enforce source to send out one down request at a time. Add a flag, is_waiting_for_dwn_reply, to determine if the source can send out a down request immediately or not. - Check the flag before calling process_single_down_tx_qlock to send out a msg - Set the flag when successfully send out a down request - Clear the flag when successfully build up a down reply - Clear the flag when find erros during sending out a down request - Clear the flag when find errors during building up a down reply - Clear the flag when timeout occurs during waiting for a down reply - Use drm_dp_mst_kick_tx() to try to send another down request in queue at the end of drm_dp_mst_wait_tx_reply() (attempt to send out messages in queue when errors occur) Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200113093649.11755-1-Wayne.Lin@amd.com
2020-01-15Merge tag 'batadv-net-for-davem-20200114' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Fix DAT candidate selection on little endian systems, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15bpf: Fix incorrect verifier simulation of ARSH under ALU32Daniel Borkmann
Anatoly has been fuzzing with kBdysch harness and reported a hang in one of the outcomes: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (85) call bpf_get_socket_cookie#46 1: R0_w=invP(id=0) R10=fp0 1: (57) r0 &= 808464432 2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 2: (14) w0 -= 810299440 3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 3: (c4) w0 s>>= 1 4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 4: (76) if w0 s>= 0x30303030 goto pc+216 221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 221: (95) exit processed 6 insns (limit 1000000) [...] Taking a closer look, the program was xlated as follows: # ./bpftool p d x i 12 0: (85) call bpf_get_socket_cookie#7800896 1: (bf) r6 = r0 2: (57) r6 &= 808464432 3: (14) w6 -= 810299440 4: (c4) w6 s>>= 1 5: (76) if w6 s>= 0x30303030 goto pc+216 6: (05) goto pc-1 7: (05) goto pc-1 8: (05) goto pc-1 [...] 220: (05) goto pc-1 221: (05) goto pc-1 222: (95) exit Meaning, the visible effect is very similar to f54c7898ed1c ("bpf: Fix precision tracking for unbounded scalars"), that is, the fall-through branch in the instruction 5 is considered to be never taken given the conclusion from the min/max bounds tracking in w6, and therefore the dead-code sanitation rewrites it as goto pc-1. However, real-life input disagrees with verification analysis since a soft-lockup was observed. The bug sits in the analysis of the ARSH. The definition is that we shift the target register value right by K bits through shifting in copies of its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the register into 32 bit mode, same happens after simulating the operation. However, for the case of simulating the actual ARSH, we don't take the mode into account and act as if it's always 64 bit, but location of sign bit is different: dst_reg->smin_value >>= umin_val; dst_reg->smax_value >>= umin_val; dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val); Consider an unknown R0 where bpf_get_socket_cookie() (or others) would for example return 0xffff. With the above ARSH simulation, we'd see the following results: [...] 1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0 1: (85) call bpf_get_socket_cookie#46 2: R0_w=invP(id=0) R10=fp0 2: (57) r0 &= 808464432 -> R0_runtime = 0x3030 3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 3: (14) w0 -= 810299440 -> R0_runtime = 0xcfb40000 4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 (0xffffffff) 4: (c4) w0 s>>= 1 -> R0_runtime = 0xe7da0000 5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0 (0x67c00000) (0x7ffbfff8) [...] In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011 0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into 0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000' and means here that the simulation didn't retain the sign bit. With above logic, the updates happen on the 64 bit min/max bounds and given we coerced the register, the sign bits of the bounds are cleared as well, meaning, we need to force the simulation into s32 space for 32 bit alu mode. Verification after the fix below. We're first analyzing the fall-through branch on 32 bit signed >= test eventually leading to rejection of the program in this specific case: 0: R1=ctx(id=0,off=0,imm=0) R10=fp0 0: (b7) r2 = 808464432 1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0 1: (85) call bpf_get_socket_cookie#46 2: R0_w=invP(id=0) R10=fp0 2: (bf) r6 = r0 3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0 3: (57) r6 &= 808464432 4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0 4: (14) w6 -= 810299440 5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0 5: (c4) w6 s>>= 1 6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0 (0x67c00000) (0xfffbfff8) 6: (76) if w6 s>= 0x30303030 goto pc+216 7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0 7: (30) r0 = *(u8 *)skb[808464432] BPF_LD_[ABS|IND] uses reserved fields processed 8 insns (limit 1000000) [...] Fixes: 9cbe1f5a32dc ("bpf/verifier: improve register value range tracking with ARSH") Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115204733.16648-1-daniel@iogearbox.net
2020-01-15hv_netvsc: Fix memory leak when removing rndis deviceMohammed Gamal
kmemleak detects the following memory leak when hot removing a network device: unreferenced object 0xffff888083f63600 (size 256): comm "kworker/0:1", pid 12, jiffies 4294831717 (age 1113.676s) hex dump (first 32 bytes): 00 40 c7 33 80 88 ff ff 00 00 00 00 10 00 00 00 .@.3............ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<00000000d4a8f5be>] rndis_filter_device_add+0x117/0x11c0 [hv_netvsc] [<000000009c02d75b>] netvsc_probe+0x5e7/0xbf0 [hv_netvsc] [<00000000ddafce23>] vmbus_probe+0x74/0x170 [hv_vmbus] [<00000000046e64f1>] really_probe+0x22f/0xb50 [<000000005cc35eb7>] driver_probe_device+0x25e/0x370 [<0000000043c642b2>] bus_for_each_drv+0x11f/0x1b0 [<000000005e3d09f0>] __device_attach+0x1c6/0x2f0 [<00000000a72c362f>] bus_probe_device+0x1a6/0x260 [<0000000008478399>] device_add+0x10a3/0x18e0 [<00000000cf07b48c>] vmbus_device_register+0xe7/0x1e0 [hv_vmbus] [<00000000d46cf032>] vmbus_add_channel_work+0x8ab/0x1770 [hv_vmbus] [<000000002c94bb64>] process_one_work+0x919/0x17d0 [<0000000096de6781>] worker_thread+0x87/0xb40 [<00000000fbe7397e>] kthread+0x333/0x3f0 [<000000004f844269>] ret_from_fork+0x3a/0x50 rndis_filter_device_add() allocates an instance of struct rndis_device which never gets deallocated as rndis_filter_device_remove() sets net_device->extension which points to the rndis_device struct to NULL, leaving the rndis_device dangling. Since net_device->extension is eventually freed in free_netvsc_device(), we refrain from setting it to NULL inside rndis_filter_device_remove() Signed-off-by: Mohammed Gamal <mgamal@redhat.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15tcp: fix marked lost packets not being retransmittedPengcheng Yang
When the packet pointed to by retransmit_skb_hint is unlinked by ACK, retransmit_skb_hint will be set to NULL in tcp_clean_rtx_queue(). If packet loss is detected at this time, retransmit_skb_hint will be set to point to the current packet loss in tcp_verify_retransmit_hint(), then the packets that were previously marked lost but not retransmitted due to the restriction of cwnd will be skipped and cannot be retransmitted. To fix this, when retransmit_skb_hint is NULL, retransmit_skb_hint can be reset only after all marked lost packets are retransmitted (retrans_out >= lost_out), otherwise we need to traverse from tcp_rtx_queue_head in tcp_xmit_retransmit_queue(). Packetdrill to demonstrate: // Disable RACK and set max_reordering to keep things simple 0 `sysctl -q net.ipv4.tcp_recovery=0` +0 `sysctl -q net.ipv4.tcp_max_reordering=3` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 8 data segments +0 write(4, ..., 8000) = 8000 +0 > P. 1:8001(8000) ack 1 // Enter recovery and 1:3001 is marked lost +.01 < . 1:1(0) ack 1 win 257 <sack 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:6001 3001:4001,nop,nop> +0 < . 1:1(0) ack 1 win 257 <sack 5001:7001 3001:4001,nop,nop> // Retransmit 1:1001, now retransmit_skb_hint points to 1001:2001 +0 > . 1:1001(1000) ack 1 // 1001:2001 was ACKed causing retransmit_skb_hint to be set to NULL +.01 < . 1:1(0) ack 2001 win 257 <sack 5001:8001 3001:4001,nop,nop> // Now retransmit_skb_hint points to 4001:5001 which is now marked lost // BUG: 2001:3001 was not retransmitted +0 > . 2001:3001(1000) ack 1 Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15ALSA: seq: Fix racy access for queue timer in proc readTakashi Iwai
snd_seq_info_timer_read() reads the information of the timer assigned for each queue, but it's done in a racy way which may lead to UAF as spotted by syzkaller. This patch applies the missing q->timer_mutex lock while accessing the timer object as well as a slight code change to adapt the standard coding style. Reported-by: syzbot+2b2ef983f973e5c40943@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200115203733.26530-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-15Fix built-in early-load Intel microcode alignmentJari Ruusu
Intel Software Developer's Manual, volume 3, chapter 9.11.6 says: "Note that the microcode update must be aligned on a 16-byte boundary and the size of the microcode update must be 1-KByte granular" When early-load Intel microcode is loaded from initramfs, userspace tool 'iucode_tool' has already 16-byte aligned those microcode bits in that initramfs image. Image that was created something like this: iucode_tool --write-earlyfw=FOO.cpio microcode-files... However, when early-load Intel microcode is loaded from built-in firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that 16-byte alignment is not guaranteed. Fix this by forcing all built-in firmware BLOBs to 16-byte alignment. [ If we end up having other firmware with much bigger alignment requirements, we might need to introduce some method for the firmware to specify it, this is the minimal "just increase the alignment a bit to account for this one special case" patch - Linus ] Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull arch/nios2 fixlet from Ley Foon Tan: "Update my nios2 maintainer email" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: MAINTAINERS: Update Ley Foon Tan's email address
2020-01-15i2c: iop3xx: Fix memory leak in probe error pathKrzysztof Kozlowski
When handling devm_gpiod_get_optional() errors, free the memory already allocated. This fixes Smatch warnings: drivers/i2c/busses/i2c-iop3xx.c:437 iop3xx_i2c_probe() warn: possible memory leak of 'new_adapter' drivers/i2c/busses/i2c-iop3xx.c:442 iop3xx_i2c_probe() warn: possible memory leak of 'new_adapter' Fixes: fdb7e884ad61 ("i2c: iop: Use GPIO descriptors") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15Merge tag 'platform-drivers-x86-v5.5-3' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: - Fix keyboard brightness control for ASUS laptops - Better handling parameters of GPD pocket fan module to avoid thermal shock - Add IDs to PMC platform driver to support Intel Comet Lake - Fix potential dead lock in Mellanox TM FIFO driver and ABI documentation * tag 'platform-drivers-x86-v5.5-3' of git://git.infradead.org/linux-platform-drivers-x86: Documentation/ABI: Add missed attribute for mlxreg-io sysfs interfaces Documentation/ABI: Fix documentation inconsistency for mlxreg-io sysfs interfaces platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0 platform/x86: intel_pmc_core: update Comet Lake platform driver platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limits platform/x86: GPD pocket fan: Use default values when wrong modparams are given platform/mellanox: fix potential deadlock in the tmfifo driver platform/x86: intel-ips: Use the correct style for SPDX License Identifier
2020-01-15Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a build problem for the hisilicon driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon/sec2 - Use atomics instead of __sync
2020-01-15Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "Fixes for mountpoint_last() bugs (by converting to use of lookup_last()) and an autofs regression fix from this cycle (caused by follow_managed() breakage introduced in barrier fixes series)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix autofs regression caused by follow_managed() changes reimplement path_mountpoint() with less magic
2020-01-15i2c: tegra: Properly disable runtime PM on driver's probe errorDmitry Osipenko
One of the recent Tegra I2C commits made a change that resumes runtime PM during driver's probe, but it missed to put the RPM in a case of error. Note that it's not correct to use pm_runtime_status_suspended because it breaks RPM refcounting. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Cc: <stable@vger.kernel.org> # v5.4+ Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15i2c: tegra: Fix suspending in active runtime PM stateDmitry Osipenko
I noticed that sometime I2C clock is kept enabled during suspend-resume. This happens because runtime PM defers dynamic suspension and thus it may happen that runtime PM is in active state when system enters into suspend. In particular I2C controller that is used for CPU's DVFS is often kept ON during suspend because CPU's voltage scaling happens quite often. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Cc: <stable@vger.kernel.org> # v5.4+ Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-15arm64: Use register field helper in kaslr_requires_kpti()Will Deacon
Rather than open-code the extraction of the E0PD field from the MMFR2 register, we can use the cpuid_feature_extract_unsigned_field() helper instead. Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: Simplify early check for broken TX1 when KASLR is enabledWill Deacon
Now that the decision to use non-global mappings is stored in a variable, the check to avoid enabling them for the terminally broken ThunderX1 platform can be simplified so that it is only keyed off the MIDR value. Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: Turn "broken gas inst" into real config optionVladimir Murzin
Use the new 'as-instr' Kconfig macro to define CONFIG_BROKEN_GAS_INST directly, making it available everywhere. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> [will: Drop redundant 'y if' logic] Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15null_blk: Fix zone write handlingDamien Le Moal
null_zone_write() only allows writing empty and implicitly opened zones. Writing to closed and explicitly opened zones must also be allowed and the zone condition must be transitioned to implicit open if the zone is not explicitly opened already. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-15arm64: Use a variable to store non-global mappings decisionMark Brown
Refactor the code which checks to see if we need to use non-global mappings to use a variable instead of checking with the CPU capabilities each time, doing the initial check for KPTI early in boot before we start allocating memory so we still avoid transitioning to non-global mappings in common cases. Since this variable always matches our decision about non-global mappings this means we can also combine arm64_kernel_use_ng_mappings() and arm64_unmap_kernel_at_el0() into a single function, the variable simply stores the result and the decision code is elsewhere. We could just have the users check the variable directly but having a function makes it clear that these uses are read-only. The result is that we simplify the code a bit and reduces the amount of code executed at runtime. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: Don't use KPTI where we have E0PDMark Brown
Since E0PD is intended to fulfil the same role as KPTI we don't need to use KPTI on CPUs where E0PD is available, we can rely on E0PD instead. Change the check that forces KPTI on when KASLR is enabled to check for E0PD before doing so, CPUs with E0PD are not expected to be affected by meltdown so should not need to enable KPTI for other reasons. Since E0PD is a system capability we will still enable KPTI if any of the CPUs in the system lacks E0PD, this will rewrite any global mappings that were established in systems where some but not all CPUs support E0PD. We may transiently have a mix of global and non-global mappings while booting since we use the local CPU when deciding if KPTI will be required prior to completing CPU enumeration but any global mappings will be converted to non-global ones when KPTI is applied. KPTI can still be forced on from the command line if required. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: Factor out checks for KASLR in KPTI code into separate functionMark Brown
In preparation for integrating E0PD support with KASLR factor out the checks for interaction between KASLR and KPTI done in boot context into a new function kaslr_requires_kpti(), in the process clarifying the distinction between what we do in boot context and what we do at runtime. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: Add initial support for E0PDMark Brown
Kernel Page Table Isolation (KPTI) is used to mitigate some speculation based security issues by ensuring that the kernel is not mapped when userspace is running but this approach is expensive and is incompatible with SPE. E0PD, introduced in the ARMv8.5 extensions, provides an alternative to this which ensures that accesses from userspace to the kernel's half of the memory map to always fault with constant time, preventing timing attacks without requiring constant unmapping and remapping or preventing legitimate accesses. Currently this feature will only be enabled if all CPUs in the system support E0PD, if some CPUs do not support the feature at boot time then the feature will not be enabled and in the unlikely event that a late CPU is the first CPU to lack the feature then we will reject that CPU. This initial patch does not yet integrate with KPTI, this will be dealt with in followup patches. Ideally we could ensure that by default we don't use KPTI on CPUs where E0PD is present. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> [will: Fixed typo in Kconfig text] Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: Move the LSE gas support detection to KconfigCatalin Marinas
As the Kconfig syntax gained support for $(as-instr) tests, move the LSE gas support detection from Makefile to the main arm64 Kconfig and remove the additional CONFIG_AS_LSE definition and check. Cc: Will Deacon <will@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15kbuild: Add support for 'as-instr' to be used in Kconfig filesCatalin Marinas
Similar to 'cc-option' or 'ld-option', it is occasionally necessary to check whether the assembler supports certain ISA extensions. In the arm64 code we currently do this in Makefile with an additional define: lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1) Add the 'as-instr' option so that it can be used in Kconfig directly: def_bool $(as-instr,.arch_extension lse) Acked-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15perf/imx_ddr: Fix cpu hotplug state cleanupLeonard Crestez
This driver allocates a dynamic cpu hotplug state but never releases it. If reloaded in a loop it will quickly trigger a WARN message: "No more dynamic states available for CPU hotplug" Fix by calling cpuhp_remove_multi_state on remove like several other perf pmu drivers. Also fix the cleanup logic on probe error paths: add the missing cpuhp_remove_multi_state call and properly check the return value from cpuhp_state_add_instant_nocalls. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15staging: comedi: ni_routes: allow partial routing informationIan Abbott
This patch fixes a regression on setting up asynchronous commands to use external trigger sources when board-specific routing information is missing. `ni_find_device_routes()` (called via `ni_assign_device_routes()`) finds the table of register values for the device family and the set of valid routes for the specific board. If both are found, `tables->route_values` is set to point to the table of register values for the device family and `tables->valid_routes` is set to point to the list of valid routes for the specific board. If either is not found, both `tables->route_values` and `tables->valid_routes` are left set at their initial null values (initialized by `ni_assign_device_routes()`) and the function returns `-ENODATA`. Returning an error results in some routing functionality being disabled. Unfortunately, leaving `table->route_values` set to `NULL` also breaks the setting up of asynchronous commands that are configured to use external trigger sources. Calls to `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` while checking the asynchronous command set-up would result in a null pointer dereference if `table->route_values` is `NULL`. The null pointer dereference is fixed in another patch, but it now results in failure to set up the asynchronous command. That is a regression from the behavior prior to commit 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") and commit 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Change `ni_find_device_routes()` to set `tables->route_values` and/or `tables->valid_routes` to valid information even if the other one can only be set to `NULL` due to missing information. The function will still return an error in that case. This should result in `tables->valid_routes` being valid for all currently supported device families even if the board-specific routing information is missing. That should be enough to fix the regression on setting up asynchronous commands to use external triggers for boards with missing routing information. Fixes: 347e244884c3 ("staging: comedi: tio: implement global tio/ctr routing") Fixes: 56d0b826d39f ("staging: comedi: ni_mio_common: implement new routing for TRIG_EXT"). Cc: <stable@vger.kernel.org> # 4.20+ Cc: Spencer E. Olson <olsonse@umich.edu> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200114182532.132058-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15staging: comedi: ni_routes: fix null dereference in ni_find_route_source()Ian Abbott
In `ni_find_route_source()`, `tables->route_values` gets dereferenced. However it is possible that `tables->route_values` is `NULL`, leading to a null pointer dereference. `tables->route_values` will be `NULL` if the call to `ni_assign_device_routes()` during board initialization returned an error due to missing device family routing information or missing board-specific routing information. For example, there is currently no board-specific routing information provided for the PCIe-6251 board and several other boards, so those are affected by this bug. The bug is triggered when `ni_find_route_source()` is called via `ni_check_trigger_arg()` or `ni_check_trigger_arg_roffs()` when checking the arguments for setting up asynchronous commands. Fix it by returning `-EINVAL` if `tables->route_values` is `NULL`. Even with this fix, setting up asynchronous commands to use external trigger sources for boards with missing routing information will still fail gracefully. Since `ni_find_route_source()` only depends on the device family routing information, it would be better if that was made available even if the board-specific routing information is missing. That will be addressed by another patch. Fixes: 4bb90c87abbe ("staging: comedi: add interface to ni routing table information") Cc: <stable@vger.kernel.org> # 4.20+ Cc: Spencer E. Olson <olsonse@umich.edu> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20200114182532.132058-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15Merge branch 'mlxsw-Various-fixes'David S. Miller
Ido Schimmel says: ==================== mlxsw: Various fixes This patch set contains various fixes for mlxsw. Patch #1 splits the init() callback between Spectrum-2 and Spectrum-3 in order to avoid enforcing the same firmware version for both ASICs, as this can't possibly work. Without this patch the driver cannot boot with the Spectrum-3 ASIC. Patches #2-#3 fix a long standing race condition that was recently exposed while testing the driver on an emulator, which is very slow compared to the actual hardware. The problem is explained in detail in the commit messages. Patch #4 fixes a selftest. Patch #5 prevents offloaded qdiscs from presenting a non-zero backlog to the user when the netdev is down. This is done by clearing the cached backlog in the driver when the netdev goes down. Patch #6 fixes qdisc statistics (backlog and tail drops) to also take into account the multicast traffic classes. v2: * Patches #2-#3: use skb_cow_head() instead of skb_unshare() as suggested by Jakub. Remove unnecessary check regarding headroom * Patches #5-#6: new ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15mlxsw: spectrum_qdisc: Include MC TCs in Qdisc countersPetr Machata
mlxsw configures Spectrum in such a way that BUM traffic is passed not through its nominal traffic class TC, but through its MC counterpart TC+8. However, when collecting statistics, Qdiscs only look at the nominal TC and ignore the MC TC. Add two helpers to compute the value for logical TC from the constituents, one for backlog, the other for tail drops. Use them throughout instead of going through the xstats pointer directly. Counters for TX bytes and packets are deduced from packet priority counters, and therefore already include BUM traffic. wred_drop counter is irrelevant on MC TCs, because RED is not enabled on them. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15mlxsw: spectrum: Wipe xstats.backlog of down portsPetr Machata
Per-port counter cache used by Qdiscs is updated periodically, unless the port is down. The fact that the cache is not updated for down ports is no problem for most counters, which are relative in nature. However, backlog is absolute in nature, and if there is a non-zero value in the cache around the time that the port goes down, that value just stays there. This value then leaks to offloaded Qdiscs that report non-zero backlog even if there (obviously) is no traffic. The HW does not keep backlog of a downed port, so do likewise: as the port goes down, wipe the backlog value from xstats. Fixes: 075ab8adaf4e ("mlxsw: spectrum: Collect tclass related stats periodically") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15selftests: mlxsw: qos_mc_aware: Fix mausezahn invocationPetr Machata
Mausezahn does not recognize "own" as a keyword on source IP address. As a result, the MC stream is not running at all, and therefore no UC degradation can be observed even in principle. Fix the invocation, and tighten the test: due to the minimum shaper configured at the MC TCs, we always expect about 20% degradation. Fail the test if it is lower. Fixes: 573363a68f27 ("selftests: mlxsw: Add qos_lib.sh") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15mlxsw: switchx2: Do not modify cloned SKBs during xmitIdo Schimmel
The driver needs to prepend a Tx header to each packet it is transmitting. The header includes information such as the egress port and traffic class. The addition of the header requires the driver to modify the SKB's header and therefore it must not be shared. Otherwise, we risk hitting various race conditions. For example, when a packet is flooded (cloned) by the bridge driver to two switch ports swp1 and swp2: t0 - mlxsw_sp_port_xmit() is called for swp1. Tx header is prepended with swp1's port number t1 - mlxsw_sp_port_xmit() is called for swp2. Tx header is prepended with swp2's port number, overwriting swp1's port number t2 - The device processes data buffer from t0. Packet is transmitted via swp2 t3 - The device processes data buffer from t1. Packet is transmitted via swp2 Usually, the device is fast enough and transmits the packet before its Tx header is overwritten, but this is not the case in emulated environments. Fix this by making sure the SKB's header is writable by calling skb_cow_head(). Since the function ensures we have headroom to push the Tx header, the check further in the function can be removed. v2: * Use skb_cow_head() instead of skb_unshare() as suggested by Jakub * Remove unnecessary check regarding headroom Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15mlxsw: spectrum: Do not modify cloned SKBs during xmitIdo Schimmel
The driver needs to prepend a Tx header to each packet it is transmitting. The header includes information such as the egress port and traffic class. The addition of the header requires the driver to modify the SKB's header and therefore it must not be shared. Otherwise, we risk hitting various race conditions. For example, when a packet is flooded (cloned) by the bridge driver to two switch ports swp1 and swp2: t0 - mlxsw_sp_port_xmit() is called for swp1. Tx header is prepended with swp1's port number t1 - mlxsw_sp_port_xmit() is called for swp2. Tx header is prepended with swp2's port number, overwriting swp1's port number t2 - The device processes data buffer from t0. Packet is transmitted via swp2 t3 - The device processes data buffer from t1. Packet is transmitted via swp2 Usually, the device is fast enough and transmits the packet before its Tx header is overwritten, but this is not the case in emulated environments. Fix this by making sure the SKB's header is writable by calling skb_cow_head(). Since the function ensures we have headroom to push the Tx header, the check further in the function can be removed. v2: * Use skb_cow_head() instead of skb_unshare() as suggested by Jakub * Remove unnecessary check regarding headroom Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15mlxsw: spectrum: Do not enforce same firmware version for multiple ASICsIdo Schimmel
In commit a72afb6879bb ("mlxsw: Enforce firmware version for Spectrum-2") I added a required firmware version for Spectrum-2, but missed the fact that mlxsw_sp2_init() is used by both Spectrum-2 and Spectrum-3. This means that the same firmware version will be used for both, which is wrong. Fix this by creating a new init() callback for Spectrum-3. Fixes: a72afb6879bb ("mlxsw: Enforce firmware version for Spectrum-2") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15usb: core: hub: Improved device recognition on remote wakeupKeiya Nobuta
If hub_activate() is called before D+ has stabilized after remote wakeup, the following situation might occur: __ ___________________ / \ / D+ __/ \__/ Hub _______________________________ | ^ ^ ^ | | | | Host _____v__|___|___________|______ | | | | | | | \-- Interrupt Transfer (*3) | | \-- ClearPortFeature (*2) | \-- GetPortStatus (*1) \-- Host detects remote wakeup - D+ goes high, Host starts running by remote wakeup - D+ is not stable, goes low - Host requests GetPortStatus at (*1) and gets the following hub status: - Current Connect Status bit is 0 - Connect Status Change bit is 1 - D+ stabilizes, goes high - Host requests ClearPortFeature and thus Connect Status Change bit is cleared at (*2) - After waiting 100 ms, Host starts the Interrupt Transfer at (*3) - Since the Connect Status Change bit is 0, Hub returns NAK. In this case, port_event() is not called in hub_event() and Host cannot recognize device. To solve this issue, flag change_bits even if only Connect Status Change bit is 1 when got in the first GetPortStatus. This issue occurs rarely because it only if D+ changes during a very short time between GetPortStatus and ClearPortFeature. However, it is fatal if it occurs in embedded system. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200109051448.28150-1-nobuta.keiya@fujitsu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-15Merge tag 'mac80211-for-net-2020-01-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A few fixes: * -O3 enablement fallout, thanks to Arnd who ran this * fixes for a few leaks, thanks to Felix * channel 12 regulatory fix for custom regdomains * check for a crash reported by syzbot (NULL function is called on drivers that don't have it) * fix TKIP replay protection after setup with some APs (from Jouni) * restrict obtaining some mesh data to avoid WARN_ONs * fix deadlocks with auto-disconnect (socket owner) * fix radar detection events with multiple devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15xfrm: support output_mark for offload ESP packetsUlrich Weber
Commit 9b42c1f179a6 ("xfrm: Extend the output_mark") added output_mark support but missed ESP offload support. xfrm_smark_get() is not called within xfrm_input() for packets coming from esp4_gro_receive() or esp6_gro_receive(). Therefore call xfrm_smark_get() directly within these functions. Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.") Signed-off-by: Ulrich Weber <ulrich.weber@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-01-15arm64: Introduce ID_ISAR6 CPU registerAnshuman Khandual
This adds basic building blocks required for ID_ISAR6 CPU register which identifies support for various instruction implementation on AArch32 state. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-kernel@vger.kernel.org Cc: kvmarm@lists.cs.columbia.edu Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> [will: Ensure SPECRES is treated the same as on A64] Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15arm64: cpufeature: Export matrix and other features to userspaceSteven Price
Export the features introduced as part of ARMv8.6 exposed in the ID_AA64ISAR1_EL1 and ID_AA64ZFR0_EL1 registers. This introduces the Matrix features (ARMv8.2-I8MM, ARMv8.2-F64MM and ARMv8.2-F32MM) along with BFloat16 (Armv8.2-BF16), speculation invalidation (SPECRES) and Data Gathering Hint (ARMv8.0-DGH). Signed-off-by: Julien Grall <julien.grall@arm.com> [Added other features in those registers] Signed-off-by: Steven Price <steven.price@arm.com> [will: Don't advertise SPECRES to userspace] Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15x86/mce/therm_throt: Do not access uninitialized therm_workChuansheng Liu
It is relatively easy to trigger the following boot splat on an Ice Lake client platform. The call stack is like: kernel BUG at kernel/timer/timer.c:1152! Call Trace: __queue_delayed_work queue_delayed_work_on therm_throt_process intel_thermal_interrupt ... The reason is that a CPU's thermal interrupt is enabled prior to executing its hotplug onlining callback which will initialize the throttling workqueues. Such a race can lead to therm_throt_process() accessing an uninitialized therm_work, leading to the above BUG at a very early bootup stage. Therefore, unmask the thermal interrupt vector only after having setup the workqueues completely. [ bp: Heavily massage commit message and correct comment formatting. ] Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle") Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200107004116.59353-1-chuansheng.liu@intel.com
2020-01-15Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"Kevin Hao
This reverts commit a7fc89f9d5fcc10a5474cfe555f5a9e5df8b0f1f because there are some bugs in this commit, and we don't have a simple way to fix these bugs. So revert this commit to make the thunderx gpio work on the stable kernel at least. We will switch to GPIOLIB_IRQCHIP for thunderx gpio by following patches. Fixes: a7fc89f9d5fc ("gpio: thunderx: Switch to GPIOLIB_IRQCHIP") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20200114082821.14015-2-haokexin@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-15tick/sched: Annotate lockless access to last_jiffies_updateEric Dumazet
syzbot (KCSAN) reported a data-race in tick_do_update_jiffies64(): BUG: KCSAN: data-race in tick_do_update_jiffies64 / tick_do_update_jiffies64 write to 0xffffffff8603d008 of 8 bytes by interrupt on cpu 1: tick_do_update_jiffies64+0x100/0x250 kernel/time/tick-sched.c:73 tick_sched_do_timer+0xd4/0xe0 kernel/time/tick-sched.c:138 tick_sched_timer+0x43/0xe0 kernel/time/tick-sched.c:1292 __run_hrtimer kernel/time/hrtimer.c:1514 [inline] __hrtimer_run_queues+0x274/0x5f0 kernel/time/hrtimer.c:1576 hrtimer_interrupt+0x22a/0x480 kernel/time/hrtimer.c:1638 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1110 [inline] smp_apic_timer_interrupt+0xdc/0x280 arch/x86/kernel/apic/apic.c:1135 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 arch_local_irq_restore arch/x86/include/asm/paravirt.h:756 [inline] kcsan_setup_watchpoint+0x1d4/0x460 kernel/kcsan/core.c:436 check_access kernel/kcsan/core.c:466 [inline] __tsan_read1 kernel/kcsan/core.c:593 [inline] __tsan_read1+0xc2/0x100 kernel/kcsan/core.c:593 kallsyms_expand_symbol.constprop.0+0x70/0x160 kernel/kallsyms.c:79 kallsyms_lookup_name+0x7f/0x120 kernel/kallsyms.c:170 insert_report_filterlist kernel/kcsan/debugfs.c:155 [inline] debugfs_write+0x14b/0x2d0 kernel/kcsan/debugfs.c:256 full_proxy_write+0xbd/0x100 fs/debugfs/file.c:225 __vfs_write+0x67/0xc0 fs/read_write.c:494 vfs_write fs/read_write.c:558 [inline] vfs_write+0x18a/0x390 fs/read_write.c:542 ksys_write+0xd5/0x1b0 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x4c/0x60 fs/read_write.c:620 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffffffff8603d008 of 8 bytes by task 0 on cpu 0: tick_do_update_jiffies64+0x2b/0x250 kernel/time/tick-sched.c:62 tick_nohz_update_jiffies kernel/time/tick-sched.c:505 [inline] tick_nohz_irq_enter kernel/time/tick-sched.c:1257 [inline] tick_irq_enter+0x139/0x1c0 kernel/time/tick-sched.c:1274 irq_enter+0x4f/0x60 kernel/softirq.c:354 entering_irq arch/x86/include/asm/apic.h:517 [inline] entering_ack_irq arch/x86/include/asm/apic.h:523 [inline] smp_apic_timer_interrupt+0x55/0x280 arch/x86/kernel/apic/apic.c:1133 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:60 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Use READ_ONCE() and WRITE_ONCE() to annotate this expected race. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191205045619.204946-1-edumazet@google.com
2020-01-15cfg80211: fix page refcount issue in A-MSDU decapFelix Fietkau
The fragments attached to a skb can be part of a compound page. In that case, page_ref_inc will increment the refcount for the wrong page. Fix this by using get_page instead, which calls page_ref_inc on the compound head and also checks for overflow. Fixes: 2b67f944f88c ("cfg80211: reuse existing page fragments in A-MSDU rx") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200113182107.20461-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: check for set_wiphy_paramsJohannes Berg
Check if set_wiphy_params is assigned and return an error if not, some drivers (e.g. virt_wifi where syzbot reported it) don't have it. Reported-by: syzbot+e8a797964a4180eb57d5@syzkaller.appspotmail.com Reported-by: syzbot+34b582cf32c1db008f8e@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200113125358.ac07f276efff.Ibd85ee1b12e47b9efb00a2adc5cd3fac50da791a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-01-15cfg80211: fix memory leak in cfg80211_cqm_rssi_updateFelix Fietkau
The per-tid statistics need to be released after the call to rdev_get_station Cc: stable@vger.kernel.org Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200108170630.33680-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 08:27:27 +0000