summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-13drm/rockchip: fix integer type used for storing dp data rateTobias Schramm
commit 2589c4025f13 ("drm/rockchip: Avoid drm_dp_link helpers") changes the type of variables used to store the display port data rate and number of lanes to u8. However u8 is not sufficient to store the link data rate of the display port. This commit reverts the type of data rate to unsigned int. Fixes: 2589c4025f13 ("drm/rockchip: Avoid drm_dp_link helpers") Signed-off-by: Tobias Schramm <t.schramm@manjaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200109073129.378507-2-t.schramm@manjaro.org
2020-01-13HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'Christophe JAILLET
'hid_hw_stop()' is already in the error handling path when branching to the 'hid_hw_open_fail' label. There is no point in calling it twice, so remove one. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-01-13drm/i915/gt: Mark ring->vma as active while pinnedChris Wilson
As we use the active state to keep the vma alive while we are reading its contents during GPU error capture, we need to mark the ring->vma as active during execution if we want to include the rinbuffer in the error state. Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-3-chris@chris-wilson.co.uk (cherry picked from commit 8ccfc20a7d56d7e16510e6e068ffb7b43c3ac100) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-13drm/i915/gt: Mark context->state vma as active while pinnedChris Wilson
As we use the active state to keep the vma alive while we are reading its contents during GPU error capture, we need to mark the context->state vma as active during execution if we want to include it in the error state. Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-2-chris@chris-wilson.co.uk (cherry picked from commit 1b8bfc57267213ddf7f0b03cbd4c40aa65b530d6) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-13drm/i915/gt: Skip trying to unbind in restore_ggtt_mappingsChris Wilson
Currently we first to try to unbind the VMA (and lazily rebind on next use) as an optimisation during restore_ggtt_mappings. Ideally, the only objects in the GGTT upon resume are the pinned kernel objects which can't be unbound and need to be restored. As the unbind interferes with the plan to mark those objects as active for error capture, forgo the optimisation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-1-chris@chris-wilson.co.uk (cherry picked from commit 80e5351df13a5c4e9ecc14a58fa60c84d356ee87) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-13drm/i915: Add missing include file <linux/math64.h>YueHaibing
Fix build error: ./drivers/gpu/drm/i915/selftests/i915_random.h: In function i915_prandom_u32_max_state: ./drivers/gpu/drm/i915/selftests/i915_random.h:48:23: error: implicit declaration of function mul_u32_u32; did you mean mul_u64_u32_div? [-Werror=implicit-function-declaration] return upper_32_bits(mul_u32_u32(prandom_u32_state(state), ep_ro)); Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 7ce5b6850b47 ("drm/i915/selftests: Use mul_u32_u32() for 32b x 32b -> 64b result") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200107135014.36472-1-yuehaibing@huawei.com (cherry picked from commit 62bf5465b26d1f502430b9c654be7d16bf2e242d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-13arm64: kernel: Correct annotation of end of el0_syncMark Brown
Commit 582f95835a8fc812c ("arm64: entry: convert el0_sync to C") caused the ENDPROC() annotating the end of el0_sync to be placed after the code for el0_sync_compat. This replaced the previous annotation where it was located after all the cases that are now converted to C, including after the currently unannotated el0_irq_compat and el0_error_compat. Move the annotation to the end of the function and add separate annotations for the _compat ones. Fixes: 582f95835a8fc812c (arm64: entry: convert el0_sync to C) Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-13iio: light: vcnl4000: Fix scale for vcnl4040Guido Günther
According to the data sheet the ambient sensor's scale is 0.12 lux/step (not 0.024 lux/step as used by vcnl4200) when the integration time is 80ms. The integration time is currently hardcoded in the driver to that value. See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: buffer: align the size of scan bytes to size of the largest elementLars Möllendorf
Previous versions of `iio_compute_scan_bytes` only aligned each element to its own length (i.e. its own natural alignment). Because multiple consecutive sets of scan elements are buffered this does not work in case the computed scan bytes do not align with the natural alignment of the first scan element in the set. This commit fixes this by aligning the scan bytes to the natural alignment of the largest scan element in the set. Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.") Signed-off-by: Lars Möllendorf <lars.moellendorf@plating.de> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: chemical: pms7003: fix unmet triggered buffer dependencyTomasz Duszynski
IIO triggered buffer depends on IIO buffer which is missing from Kconfig file. This should go unnoticed most of the time because there's a chance something else has already enabled buffers. In some rare cases though one might experience kbuild warnings about unmet direct dependencies and build failures due to missing symbols. Fix this by selecting IIO_BUFFER explicitly. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Fixes: a1d642266c14 ("iio: chemical: add support for Plantower PMS7003 sensor") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_IDStephan Gerhold
At the moment, attempting to probe a device with ST_LSM6DS3_ID (e.g. using the st,lsm6ds3 compatible) fails with: st_lsm6dsx_i2c 1-006b: unsupported whoami [69] ... even though 0x69 is the whoami listed for ST_LSM6DS3_ID. This happens because st_lsm6dsx_check_whoami() also attempts to match unspecified (zero-initialized) entries in the "id" array. ST_LSM6DS3_ID = 0 will therefore match any entry in st_lsm6dsx_sensor_settings (here: the first), because none of them actually have all 12 entries listed in the "id" array. Avoid this by additionally checking if "name" is set, which is only set for valid entries in the "id" array. Note: Although the problem was introduced earlier it did not surface until commit 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1") because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings. Fixes: d068e4a0f921 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings") Cc: <stable@vger.kernel.org> # 5.4 Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13iio: adc: ad7124: Fix DT channel configurationAlexandru Tachici
This patch fixes device tree channel configuration. ad7124 driver reads channels configuration from the device tree. It expects to find channel specifications as child nodes. Before this patch ad7124 driver assumed that the child nodes are parsed by for_each_available_child_of_node in the order 0,1,2,3... This is wrong and the real order of the children can be seen by running: dtc -I fs /sys/firmware/devicetree/base on the machine. For example, running this on an rpi 3B+ yields the real children order: 4,2,0,7,5,3,1,6 Before this patch the driver assigned the channel configuration like this: - 0 <- 4 - 1 <- 2 - 2 <- 0 ........ For example, the symptoms can be observed by connecting the 4th channel to a 1V tension and then reading the in_voltage0-voltage19_raw sysfs (multiplied of course by the scale) one would see that channel 0 measures 1V and channel 4 measures only noise. Now the driver uses the reg property of each child in order to correctly identify to which channel the parsed configuration belongs to. Fixes b3af341bbd966: ("iio: adc: Add ad7124 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13cpuidle: teo: Fix intervals[] array indexing bugIkjoon Jang
Fix a simple bug in rotating array index. Fixes: b26bf6ab716f ("cpuidle: New timer events oriented governor for tickless systems") Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-13platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0Jian-Hong Pan
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to brightness 0. According to ASUS' information, the brightness should be 0x80 ~ 0x83. This patch fixes it by following the logic. Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support") Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0Jian-Hong Pan
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to brightness 0. According to ASUS' information, the brightness should be 0x80 ~ 0x83. This patch fixes it by following the logic. Fixes: e9809c0b9670 ("asus-wmi: add keyboard backlight support") Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13ALSA: dice: fix fallback from protocol extension into limited functionalityTakashi Sakamoto
At failure of attempt to detect protocol extension, ALSA dice driver should be fallback to limited functionality. However it's not. This commit fixes it. Cc: <stable@vger.kernel.org> # v4.18+ Fixes: 58579c056c1c9 ("ALSA: dice: use extended protocol to detect available stream formats") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200113084630.14305-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-13ALSA: firewire-tascam: fix corruption due to spin lock without restoration ↵Takashi Sakamoto
in SoftIRQ context ALSA firewire-tascam driver can bring corruption due to spin lock without restoration of IRQ flag in SoftIRQ context. This commit fixes the bug. Cc: Scott Bahling <sbahling@suse.com> Cc: <stable@vger.kernel.org> # v4.21 Fixes: d7167422433c ("ALSA: firewire-tascam: queue events for change of control surface") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20200113085719.26788-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-13platform/x86: intel_pmc_core: update Comet Lake platform driverHarry Pan
Adding new CML CPU model ID into platform driver support list. Signed-off-by: Harry Pan <harry.pan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limitsHans de Goede
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70). Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13platform/x86: GPD pocket fan: Use default values when wrong modparams are givenHans de Goede
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case. This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL. Cc: stable@vger.kernel.org Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13platform/mellanox: fix potential deadlock in the tmfifo driverLiming Sun
This commit fixes the potential deadlock caused by the console Rx and Tx processing at the same time. Rx and Tx both take the console and tmfifo spinlock but in different order which causes potential deadlock. The fix is to use different tmfifo spinlock for Rx and Tx since they protect different resources and it's safe to split the lock. Below is the reported call trace when copying/pasting large string in the console. Rx: _raw_spin_lock_irqsave (hvc lock) __hvc_poll hvc_poll in_intr vring_interrupt mlxbf_tmfifo_rxtx_one_desc (tmfifo lock) mlxbf_tmfifo_rxtx mlxbf_tmfifo_work_rxtx Tx: _raw_spin_lock_irqsave (tmfifo lock) mlxbf_tmfifo_virtio_notify virtqueue_notify virtqueue_kick put_chars hvc_push hvc_write (hvc lock) ... do_tty_write tty_write Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Cc: <stable@vger.kernel.org> # 5.4+ Reviewed-by: David Woods <dwoods@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13platform/x86: intel-ips: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to x86 Platform Specific Drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-13x86/mce: Fix use of uninitialized MCE message stringJan H. Schönherr
The function mce_severity() is not required to update its msg argument. In fact, mce_severity_amd() does not, which makes mce_no_way_out() return uninitialized data, which may be used later for printing. Assuming that implementations of mce_severity() either always or never update the msg argument (which is currently the case), it is sufficient to initialize the temporary variable in mce_no_way_out(). While at it, avoid printing a useless "Unknown". Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200103150722.20313-4-jschoenh@amazon.de
2020-01-13x86/mce: Fix mce=nobootlogJan H. Schönherr
Since commit 8b38937b7ab5 ("x86/mce: Do not enter deferred errors into the generic pool twice") the mce=nobootlog option has become mostly ineffective (after being only slightly ineffective before), as the code is taking actions on MCEs left over from boot when they have a usable address. Move the check for MCP_DONTLOG a bit outward to make it effective again. Also, since commit 011d82611172 ("RAS: Add a Corrected Errors Collector") the two branches of the remaining "if" at the bottom of machine_check_poll() do same. Unify them. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200103150722.20313-3-jschoenh@amazon.de
2020-01-13x86/mce: Take action on UCNA/Deferred errors againJan H. Schönherr
Commit fa92c5869426 ("x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll") added handling of UCNA and Deferred errors by adding them to the ring for SRAO errors. Later, commit fd4cf79fcc4b ("x86/mce: Remove the MCE ring for Action Optional errors") switched storage from the SRAO ring to the unified pool that is still in use today. In order to only act on the intended errors, a filter for MCE_AO_SEVERITY is used -- effectively removing handling of UCNA/Deferred errors again. Extend the severity filter to include UCNA/Deferred errors again. Also, generalize the naming of the notifier from SRAO to UC to capture the extended scope. Note, that this change may cause a message like the following to appear, as the same address may be reported as SRAO and as UCNA: Memory failure: 0x5fe3284: already hardware poisoned Technically, this is a return to previous behavior. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200103150722.20313-2-jschoenh@amazon.de
2020-01-13i3c: master: dw: reattach device on first available location of address tableVitor Soares
For today the reattach function only update the device address on the controller. Update the location to the first available too, will optimize the enumeration process avoiding additional checks to keep the available positions on address table consecutive. Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2020-01-13i3c: master: cdns: convert to devm_platform_ioremap_resourceYangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2020-01-13i3c: master: dw: convert to devm_platform_ioremap_resourceYangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Vitor Soares <vitor.soares@synopsys.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2020-01-13drm/virtio: add missing virtio_gpu_array_lock_resv callGerd Hoffmann
When submitting a fenced command we must lock the object reservations because virtio_gpu_queue_fenced_ctrl_buffer() unlocks after adding the fence. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Tested-by: Jann Horn <jannh@google.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200110094535.23472-1-kraxel@redhat.com
2020-01-12Linux 5.5-rc6Linus Torvalds
2020-01-12Merge tag 'riscv/for-v5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "Two fixes for RISC-V: - Clear FP registers during boot when FP support is present, rather than when they aren't present - Move the header files associated with the SiFive L2 cache controller to drivers/soc (where the code was recently moved)" * tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fixup obvious bug for fp-regs reset riscv: move sifive_l2_cache.h to include/soc
2020-01-12riscv: Fixup obvious bug for fp-regs resetGuo Ren
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine ISA Register misa. Every bit:1 indicate a feature, so we should beqz reset_done when there is no F/D bit in csr_misa register. Signed-off-by: Guo Ren <ren_guo@c-sky.com> [paul.walmsley@sifive.com: fix typo in commit message] Fixes: 9e80635619b51 ("riscv: clear the instruction cache and all registers when booting") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12riscv: move sifive_l2_cache.h to include/socYash Shah
The commit 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") moves the sifive L2 cache driver to driver/soc. It did not move the header file along with the driver. Therefore this patch moves the header file to driver/soc Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> [paul.walmsley@sifive.com: updated to fix the include guard] Fixes: 9209fb51896f ("riscv: move sifive_l2_cache.c to drivers/soc") Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-12Merge tag 'iommu-fixes-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Two fixes for VT-d and generic IOMMU code to fix teardown on error handling code paths. - Patch for the Intel VT-d driver to fix handling of non-PCI devices - Fix W=1 compile warning in dma-iommu code * tag 'iommu-fixes-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/dma: fix variable 'cookie' set but not used iommu/vt-d: Unlink device if failed to add to group iommu: Remove device link to group on failure iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU
2020-01-12m68k: defconfig: Update defconfigs for v5.5-rc3Geert Uytterhoeven
- Enable modular build of new crypto algorithms: - CONFIG_CRYPTO_BLAKE2S=m, - CONFIG_CRYPTO_CURVE25519=m, - CONFIG_CRYPTO_LIB_BLAKE2S=m, - CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m, - CONFIG_CRYPTO_LIB_CURVE25519=m. - Remove CONFIG_CRYPTO_XXHASH=m (auto-selected by CONFIG_BTRFS_FS since commit 3951e7f050ac6a38 ("btrfs: add xxhash64 to checksumming algorithms"), - Move CONFIG_EARLY_PRINTK. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-01-12m68k: Wire up clone3() syscallKars de Jong
Wire up the clone3() syscall for m68k. The special entry point is done in assembler as was done for clone() as well. This is needed because all registers need to be saved. The C wrapper then calls the generic sys_clone3() with the correct arguments. Tested on A1200 using the simple test program from: https://lore.kernel.org/lkml/20190716130631.tohj4ub54md25dys@brauner.io/ Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Link: https://lore.kernel.org/r/20191124195225.31230-1-jongk@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-01-11bpftool: Fix printing incorrect pointer in btf_dump_ptrMartin KaFai Lau
For plain text output, it incorrectly prints the pointer value "void *data". The "void *data" is actually pointing to memory that contains a bpf-map's value. The intention is to print the content of the bpf-map's value instead of printing the pointer pointing to the bpf-map's value. In this case, a member of the bpf-map's value is a pointer type. Thus, it should print the "*(void **)data". Fixes: 22c349e8db89 ("tools: bpftool: fix format strings and arguments for jsonw_printf()") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com
2020-01-11Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two driver bugfixes, a documentation fix, and a removal of a spec violation for the bus recovery algorithm in the core" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: fix bus recovery stop mode timing i2c: bcm2835: Store pointer to bus clock dt-bindings: i2c: at91: fix i2c-sda-hold-time-ns documentation for sam9x60 i2c: at91: fix clk_offset for sam9x60
2020-01-11Merge tag 'clone3-tls-v5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull thread fixes from Christian Brauner: "This contains a series of patches to fix CLONE_SETTLS when used with clone3(). The clone3() syscall passes the tls argument through struct clone_args instead of a register. This means, all architectures that do not implement copy_thread_tls() but still support CLONE_SETTLS via copy_thread() expecting the tls to be located in a register argument based on clone() are currently unfortunately broken. Their tls value will be garbage. The patch series fixes this on all architectures that currently define __ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure that any architecture that enables clone3() in the future is forced to also implement copy_thread_tls(). My ultimate goal is to get rid of the copy_thread()/copy_thread_tls() split and just have copy_thread_tls() at some point in the not too distant future (Maybe even renaming copy_thread_tls() back to simply copy_thread() once the old function is ripped from all arches). This is dependent now on all arches supporting clone3(). While all relevant arches do that now there are still four missing: ia64, m68k, sh and sparc. They have the system call reserved, but not implemented. Once they all implement clone3() we can get rid of ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS. This series also includes a minor fix for the arm64 uapi headers which caused __NR_clone3 to be missing from the exported user headers. Unfortunately the series came in a little late especially given that it touches a range of architectures. Due to the holidays not all arch maintainers responded in time probably due to their backlog. Will and Arnd have thankfully acked the arm specific changes. Given that the changes are straightforward and rather minimal combined with the fact the that clone3() with CLONE_SETTLS is broken I decided to send them post rc3 nonetheless" * tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: um: Implement copy_thread_tls clone3: ensure copy_thread_tls is implemented xtensa: Implement copy_thread_tls riscv: Implement copy_thread_tls parisc: Implement copy_thread_tls arm: Implement copy_thread_tls arm64: Implement copy_thread_tls arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
2020-01-11MAINTAINERS: update my email addressJakub Kicinski
My Netronome email address may become inactive soon. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11doc: fix typo of snapshot in documentationJacob Keller
A couple of locations accidentally misspelled snapshot as shapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11devlink: correct misspelling of snapshotJacob Keller
The function to obtain a unique snapshot id was mistakenly typo'd as devlink_region_shapshot_id_get. Fix this typo by renaming the function and all of its users. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11ALSA: hda: Rename back to dmic_detect optionTakashi Iwai
We've got quite a few bug reports showing the SOF driver being loaded unintentionally recently, and the reason seems to be that users didn't know the module option change: with the recent kernel, a new option dsp_driver=1 has to be passed to a new module snd-intel-dspcfg instead of snd_hda_intel.dmic_detect=0 option. That is, actually there are two tricky things here: - We changed the whole detection in another module and another option semantics. - The existing option for skipping the DSP probe was also renamed. For avoiding the confusion and giving user more hint, this patch reverts the renamed option dsp_driver back to dmic_detect for snd-hda-intel module, and show the warning about the module option change when the non-default value is passed. Fixes: 82d9d54a6c0e ("ALSA: hda: add Intel DSP configuration / probe code") Link: https://lore.kernel.org/r/20200109082000.26729-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-01-10Merge branch 'DP83822-and-DP83TC811-Fixes'David S. Miller
Dan Murphy says: ==================== DP83822 and DP83TC811 Fixes Two fixes on net/phy/Kconfig for the TI ethernet PHYs. First fixed the typo in the Kconfig for the DP83TC811 where it incorretly stated that the support was for a DP83TC822 which does not exist. Second fix was to update the DP83822 Kconfig entry to indicate support for the DP83825 devices in the description and the prompt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: phy: DP83822: Update Kconfig with DP83825I supportDan Murphy
Update the Kconfig description to indicate support for the DP83825I device as well. Fixes: 32b12dc8fde1 ("net: phy: Add DP83825I to the DP83822 driver") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: phy: DP83TC811: Fix typo in KconfigDan Murphy
Fix typo in the Kconfig for the DP83TC811 as it indicates support for the DP83TC822 which is incorrect. Fixes: 6d749428788b {"net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10Merge tag 'v5.5-rockchip-dtsfixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A fix for the Beelink A1 IR receiver setting the correct polarity. * tag 'v5.5-rockchip-dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix IR on Beelink A1 Link: https://lore.kernel.org/r/2054603.JKFSmqfO19@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'sunxi-fixes-for-5.5' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A couple of fixes for GPIO polarity and regulators on the A64 olinuxino. * tag 'sunxi-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator Link: https://lore.kernel.org/r/582f4fda-38af-43e8-af58-957aee5b9dd8.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'imx-fixes-5.5-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.5, round 2: - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0" error seen with UART1. - Correct compatible of RV3029 RTC device on imx6q-dhcom board. - Correct interrupt trigger type for magnetometer on board imx8mq-librem5-devkit. - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP development board. - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so that Ethernet interface on the board works properly. - Fix Toradex Colibri board to get NAND flash support back. - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which is connected to PMIC SW2 output rather than a fixed 3V3 rail. - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by kernel. - Fix endian setting for DCFG on LS1028A SoC, so that register access of DCFG becomes correct. * tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection ARM: dts: imx7ulp: fix reg of cpu node arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm arm64: dts: ls1028a: fix endian setting for dcfg ARM: dts: imx6q-dhcom: fix rtc compatible Link: https://lore.kernel.org/r/20200110011836.GW4456@T480 Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-10Merge tag 'amlogic-fixes' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm-soc: Amlogic fixes for v5.5-rc * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt dt-bindings: reset: meson8b: fix duplicate reset IDs soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init() soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors ARM: dts: meson8: fix the size of the PMU registers arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs Link: https://lore.kernel.org/r/7hmuaweavi.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit (git 2.34.1) at 2025-09-11 15:28:28 +0000