summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-10devlink: Wait longer before warning about unset port typeIdo Schimmel
The commit cited below causes devlink to emit a warning if a type was not set on a devlink port for longer than 30 seconds to "prevent misbehavior of drivers". This proved to be problematic when unregistering the backing netdev. The flow is always: devlink_port_type_clear() // schedules the warning unregister_netdev() // blocking devlink_port_unregister() // cancels the warning The call to unregister_netdev() can block for long periods of time for various reasons: RTNL lock is contended, large amounts of configuration to unroll following dismantle of the netdev, etc. This results in devlink emitting a warning despite the driver behaving correctly. In emulated environments (of future hardware) which are usually very slow, the warning can also be emitted during port creation as more than 30 seconds can pass between the time the devlink port is registered and when its type is set. In addition, syzbot has hit this warning [1] 1974 times since 07/11/19 without being able to produce a reproducer. Probably because reproduction depends on the load or other bugs (e.g., RTNL not being released). To prevent bogus warnings, increase the timeout to 1 hour. [1] https://syzkaller.appspot.com/bug?id=e99b59e9c024a666c9f7450dc162a4b74d09d9cb Fixes: 136bf27fc0e9 ("devlink: add warning in case driver does not set port type") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: syzbot+b0a18ed7b08b735d2f41@syzkaller.appspotmail.com Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10platform/chrome: wilco_ec: Fix keyboard backlight probingDaniel Campello
The EC on the Wilco platform responds with 0xFF to commands related to the keyboard backlight on the absence of a keyboard backlight module. This change allows the EC driver to continue loading even if the backlight module is not present. Fixes: 119a3cb6d687 ("platform/chrome: wilco_ec: Add keyboard backlight LED support") Signed-off-by: Daniel Campello <campello@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Benson Leung <bleung@chromium.org>
2020-01-10Input: sur40 - fix interface sanity checksJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: bdb5c57f209c ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-8-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: gtco - drop redundant variable reinitJohan Hovold
Drop the second, redundant reinitialisation of the endpoint-descriptor pointer from probe. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-7-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: gtco - fix extra-descriptor debug messageJohan Hovold
Make sure to use the current altsetting when printing size of any extra descriptors of the interface. Also fix the s/endpoint/interface/ mixup in the message itself. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-6-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: gtco - fix endpoint sanity checkJohan Hovold
The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could lead to the driver binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 162f98dea487 ("Input: gtco - fix crash on detecting device without endpoints") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-5-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: aiptek - use descriptors of current altsettingJohan Hovold
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-4-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: aiptek - fix endpoint sanity checkJohan Hovold
The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could lead to the driver binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-3-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: pegasus_notetaker - fix endpoint sanity checkJohan Hovold
The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could be used by a malicious device (or USB descriptor fuzzer) to trigger a NULL-pointer dereference. Fixes: 1afca2b66aac ("Input: add Pegasus Notetaker tablet driver") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Martin Kepplinger <martink@posteo.de> Acked-by: Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-2-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_registerChuhong Yuan
The driver misses a check for devm_thermal_zone_of_sensor_register(). Add a check to fix it. Fixes: e28d0c9cd381 ("input: convert sun4i-ts to use devm_thermal_zone_of_sensor_register") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()Miles Chen
We observed a large(order-3) allocation in evdev_open() and it may cause an OOM kernel panic in kzalloc(), before we getting to the vzalloc() fallback. Fix it by converting kzalloc()/vzalloc() to kvzalloc() to avoid the OOM killer logic as we have a vmalloc fallback. InputReader invoked oom-killer: gfp_mask=0x240c2c0 (GFP_KERNEL|__GFP_NOWARN|__GFP_COMP|__GFP_ZERO), nodemask=0, order=3, oom_score_adj=-900 ... (dump_backtrace) from (show_stack+0x18/0x1c) (show_stack) from (dump_stack+0x94/0xa8) (dump_stack) from (dump_header+0x7c/0xe4) (dump_header) from (out_of_memory+0x334/0x348) (out_of_memory) from (__alloc_pages_nodemask+0xe9c/0xeb8) (__alloc_pages_nodemask) from (kmalloc_order_trace+0x34/0x128) (kmalloc_order_trace) from (__kmalloc+0x258/0x36c) (__kmalloc) from (evdev_open+0x5c/0x17c) (evdev_open) from (chrdev_open+0x100/0x204) (chrdev_open) from (do_dentry_open+0x21c/0x354) (do_dentry_open) from (vfs_open+0x58/0x84) (vfs_open) from (path_openat+0x640/0xc98) (path_openat) from (do_filp_open+0x78/0x11c) (do_filp_open) from (do_sys_open+0x130/0x244) (do_sys_open) from (SyS_openat+0x14/0x18) (SyS_openat) from (__sys_trace_return+0x0/0x10) ... Normal: 12488*4kB (UMEH) 6984*8kB (UMEH) 2101*16kB (UMEH) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 139440kB HighMem: 206*4kB (H) 131*8kB (H) 42*16kB (H) 2*32kB (H) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2608kB ... Kernel panic - not syncing: Out of memory and no killable processes... Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fix from Jiri Kosina: "A regression fix for EPOLLOUT handling in hidraw and uhid" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hidraw, uhid: Always report EPOLLOUT
2020-01-10Merge tag 'usb-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of USB and PHY driver fixes for 5.5-rc6 Nothing all that unusual, just the a bunch of small fixes for a lot of different reported issues. The PHY driver fixes are in here as they interacted with the usb drivers. Full details of the patches are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'usb-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: missing parentheses in USE_NEW_SCHEME usb: ohci-da8xx: ensure error return on variable error is set usb: musb: Disable pullup at init usb: musb: fix idling for suspend after disconnect interrupt usb: typec: ucsi: Fix the notification bit offsets USB: Fix: Don't skip endpoint descriptors with maxpacket=0 USB-PD tcpm: bad warning+size, PPS adapters phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz usb: chipidea: host: Disable port power only if previously enabled usb: cdns3: should not use the same dev_id for shared interrupt handler usb: dwc3: gadget: Fix request complete check usb: musb: dma: Correct parameter passed to IRQ handler usb: musb: jz4740: Silence error if code is -EPROBE_DEFER usb: udc: tegra: select USB_ROLE_SWITCH USB: core: fix check for duplicate endpoints phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices ...
2020-01-10Merge tag 'char-misc-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single fix, for the chrdev core, for 5.5-rc6 There's been a long-standing race condition triggered by syzbot, and occasionally real people, in the chrdev open() path. Will finally took the time to track it down and fix it for real before the holidays. Here's that one patch, it's been in linux-next for a while with no reported issues and it does fix the reported problem" * tag 'char-misc-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: chardev: Avoid potential use-after-free in 'chrdev_open()'
2020-01-10Merge tag 'staging-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are some small staging driver fixes for 5.5-rc6. Nothing major here, just some small fixes for a comedi driver, the vt6656 driver, and a new device id for the rtl8188eu driver. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21 staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713 staging: vt6656: set usb_set_intfdata on driver fail. staging: vt6656: remove bool from vnt_radio_power_on ret staging: vt6656: limit reg output to block size staging: vt6656: correct return of vnt_init_registers. staging: vt6656: Fix non zero logical return of, usb_control_msg
2020-01-10Merge tag 'tty-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty/serial driver fixes for 5.5-rc6. The first fixes a much much reported issue with a previous tty port link patch that is in your tree, and the second fixes a problem where the serdev driver would claim ACPI devices that it shouldn't be claiming. Both have been in linux-next for a while with no reported issues" * tag 'tty-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serdev: Don't claim unsupported ACPI serial devices tty: always relink the port
2020-01-10Merge tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes that should go into this round. This pull request contains two NVMe fixes via Keith, removal of a dead function, and a fix for the bio op for read truncates (Ming)" * tag 'block-5.5-2020-01-10' of git://git.kernel.dk/linux-block: nvmet: fix per feat data len for get_feature nvme: Translate more status codes to blk_status_t fs: move guard_bio_eod() after bio_set_op_attrs block: remove unused mp_bvec_last_segment
2020-01-10Merge tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fix from Jens Axboe: "Single fix for this series, fixing a regression with the short read handling. This just removes it, as it cannot safely be done for all cases" * tag 'io_uring-5.5-2020-01-10' of git://git.kernel.dk/linux-block: io_uring: remove punt of short reads to async context
2020-01-10Merge tag 'mtd/fixes-for-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "MTD: - sm_ftl: Fix NULL pointer warning. Raw NAND: - Cadence: fix compile testing. - STM32: Avoid locking. Onenand: - Fix several sparse/build warnings. SPI-NOR: - Add a flag to fix interaction with Micron parts" * tag 'mtd/fixes-for-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: Fix the writing of the Status Register on micron flashes mtd: sm_ftl: fix NULL pointer warning mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy mtd: onenand: samsung: Fix iomem access with regular memcpy mtd: onenand: omap2: Fix errors in style mtd: cadence: Fix cast to pointer from integer of different size warning mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus
2020-01-10Merge tag 'sound-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few piled ASoC fixes and usual HD-audio and USB-audio fixups. Some of them are for ASoC core error-handling" * tag 'sound-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: enable regmap internal locking ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen ALSA: hda/realtek - Set EAPD control to default for ALC222 ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5 ALSA: hda/realtek - Add new codec supported for ALCS1200A ASoC: Intel: boards: Fix compile-testing RT1011/RT5682 ASoC: SOF: imx8: Fix dsp_box offset ASoC: topology: Prevent use-after-free in snd_soc_get_pcm_runtime() ASoC: fsl_audmix: add missed pm_runtime_disable ASoC: stm32: spdifrx: fix input pin state management ASoC: stm32: spdifrx: fix race condition in irq handler ASoC: stm32: spdifrx: fix inconsistent lock state ASoC: core: Fix access to uninitialized list heads ASoC: soc-core: Set dpcm_playback / dpcm_capture ASoC: SOF: imx8: fix memory allocation failure check on priv->pd_dev ASoC: SOF: Intel: hda: hda-dai: fix oops on hda_link .hw_free ASoC: SOF: fix fault at driver unload after failed probe
2020-01-10Merge tag 'thermal-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fix from Daniel Lezcano: "Fix backward compatibility with old DTBs on QCOM tsens (Amit Kucheria)" * tag 'thermal-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: drivers: thermal: tsens: Work with old DTBs
2020-01-10Merge tag 'pm-5.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Prevent the cpufreq-dt driver from probing Tegra20/30 (Dmitry Osipenko) and prevent the Intel RAPL power capping driver from crashing during CPU initialization due to a NULL pointer dereference if the processor model in use is not known to it (Harry Pan)" * tag 'pm-5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online() cpufreq: dt-platdev: Blacklist NVIDIA Tegra20 and Tegra30 SoCs
2020-01-10ipv4: Detect rollover in specific fib table dumpDavid Ahern
Sven-Haegar reported looping on fib dumps when 255.255.255.255 route has been added to a table. The looping is caused by the key rolling over from FFFFFFFF to 0. When dumping a specific table only, we need a means to detect when the table dump is done. The key and count saved to cb args are both 0 only at the start of the table dump. If key is 0 and count > 0, then we are in the rollover case. Detect and return to avoid looping. This only affects dumps of a specific table; for dumps of all tables (the case prior to the change in the Fixes tag) inet_dump_fib moved the entry counter to the next table and reset the cb args used by fib_table_dump and fn_trie_dump_leaf, so the rollover ffffffff back to 0 did not cause looping with the dumps. Fixes: effe67926624 ("net: Enable kernel side filtering of route dumps") Reported-by: Sven-Haegar Koch <haegar@sdinet.de> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10Merge branch 'stmmac-filtering-fixes'David S. Miller
Jose Abreu says: ==================== net: stmmac: Filtering fixes Two single fixes for the L3 and L4 filtering in stmmac. 1) Updates the internal status of RSS when disabling it in order to keep internal driver status consistent. 2) Do not lets user add a filter if RSS is enabled because the filter will not work correctly as RSS bypasses this mechanism. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: stmmac: tc: Do not setup flower filtering if RSS is enabledJose Abreu
RSS, when enabled, will bypass the L3 and L4 filtering causing it not to work. Add a check before trying to setup the filters. Fixes: 425eabddaf0f ("net: stmmac: Implement L3/L4 Filters using TC Flower") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: stmmac: selftests: Update status when disabling RSSJose Abreu
We are disabling RSS on HW but not updating the internal private status to the 'disabled' state. This is needed for next tc commit that will check if RSS is disabled before trying to apply filters. Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net/tls: fix async operationJakub Kicinski
Mallesham reports the TLS with async accelerator was broken by commit d10523d0b3d7 ("net/tls: free the record on encryption error") because encryption can return -EINPROGRESS in such setups, which should not be treated as an error. The error is also present in the BPF path (likely copied from there). Reported-by: Mallesham Jatharakonda <mallesham.jatharakonda@oneconvergence.com> Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net/tls: avoid spurious decryption error with HW resyncJakub Kicinski
When device loses sync mid way through a record - kernel has to re-encrypt the part of the record which the device already decrypted to be able to decrypt and authenticate the record in its entirety. The re-encryption piggy backs on the decryption routine, but obviously because the partially decrypted record can't be authenticated crypto API returns an error which is then ignored by tls_device_reencrypt(). Commit 5c5ec6685806 ("net/tls: add TlsDecryptError stat") added a statistic to count decryption errors, this statistic can't be incremented when we see the expected re-encryption error. Move the inc to the caller. Reported-and-tested-by: David Beckett <david.beckett@netronome.com> Fixes: 5c5ec6685806 ("net/tls: add TlsDecryptError stat") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: bpf: Don't leak time wait and request socketsLorenz Bauer
It's possible to leak time wait and request sockets via the following BPF pseudo code:   sk = bpf_skc_lookup_tcp(...) if (sk) bpf_sk_release(sk) If sk->sk_state is TCP_NEW_SYN_RECV or TCP_TIME_WAIT the refcount taken by bpf_skc_lookup_tcp is not undone by bpf_sk_release. This is because sk_flags is re-used for other data in both kinds of sockets. The check !sock_flag(sk, SOCK_RCU_FREE) therefore returns a bogus result. Check that sk_flags is valid by calling sk_fullsock. Skip checking SOCK_RCU_FREE if we already know that sk is not a full socket. Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper") Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200110132336.26099-1-lmb@cloudflare.com
2020-01-10lib/vdso: Make __cvdso_clock_getres() staticVincenzo Frascino
Fix the following sparse warning in the generic vDSO library: linux/lib/vdso/gettimeofday.c:224:5: warning: symbol '__cvdso_clock_getres' was not declared. Should it be static? Make it static and also mark it __maybe_unsed. Fixes: 502a590a170b ("lib/vdso: Move fallback invocation to the callers") Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191128111719.8282-1-vincenzo.frascino@arm.com
2020-01-10Revert "arm64: kexec: make dtb_mem always enabled"Will Deacon
Adding crash dump support to 'kexec_file' is going to extend 'struct kimage_arch' with more 'kexec_file'-specific members. The cleanup here then starts to get in the way, so revert it. This reverts commit 621516789ee6e285cb2088fe4706eedd030d38bf. Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-10drivers/perf: hisi: Simplify hisi_read_sccl_and_ccl_id and its commentShaokun Zhang
hisi_read_sccl_and_ccl_id is not readable and its comment is a little confused, so simplify the function and its comment as Mark's suggestion. Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: John Garry <john.garry@huawei.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-10nvmet: fix per feat data len for get_featureAmit Engel
The existing implementation for the get_feature admin-cmd does not use per-feature data len. This patch introduces a new helper function nvmet_feat_data_len(), which is used to calculate per feature data len. Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID). Fixes: commit e9061c397839 ("nvmet: Remove the data_len field from the nvmet_req struct") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amit Engel <amit.engel@dell.com> [endiness, naming, and kernel style fixes] Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-10nvme: Translate more status codes to blk_status_tKeith Busch
Decode interrupted command and not ready namespace nvme status codes to BLK_STS_TARGET. These are not generic IO errors and should use a non-path specific error so that it can use the non-failover retry path. Reported-by: John Meneghini <John.Meneghini@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-10HID: hidraw, uhid: Always report EPOLLOUTJiri Kosina
hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-01-10ASoC: stm32: dfsdm: fix 16 bits recordOlivier Moysan
In stm32_afsdm_pcm_cb function, the transfer size is provided in bytes. However, samples are copied as 16 bits words from iio buffer. Divide by two the transfer size, to copy the right number of samples. Fixes: 1e7f6e1c69f0 ("ASoC: stm32: dfsdm: add 16 bits audio record support") Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20200110131131.3191-1-olivier.moysan@st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10Merge branch 'powercap'Rafael J. Wysocki
* powercap: powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()
2020-01-10platform/x86: intel_atomisp2_pm: Spelling fixesAndy Shevchenko
Fix ambiguous spelling in the comments. While here, update two lines to fit one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: intel_atomisp2_pm: Refactor timeout loopAndy Shevchenko
The timeout loop look more naturally when done like unsigned long timeout = ...; ... do { ... if (cond) return %OK; sleep(...); } while (time_before(timeout)); ...print timeout error... return %ERROR; It also saves LOCs. Convert the driver to this format of timeout loop. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: asus_wmi: Set throttle thermal policy to defaultLeonid Maksymchuk
ASUS TUF FX705DY/FX505DY starts in silent mode and under heavy CPU load it overheats and drops CPU frequency to 399MHz and stays at it until reboot [1]. Set throttle thermal policy to default to avoid overheating and throttlig. [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=203733 Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: asus_wmi: Support throttle thermal policyLeonid Maksymchuk
Throttle thermal policy ACPI device is used to control CPU cooling and throttling. This patch adds sysfs entry for setting current mode and Fn+F5 hotkey that switches to next. Policy modes: * 0x00 - default * 0x01 - overboost * 0x02 - silent Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: touchscreen_dmi: Fix indentation in several placesAndy Shevchenko
1. Put on one line PROPERTY_ENTRY_STRING("firmware-name", ...) lines. In most cases this doesn't over the limit, the rest is pretty much obvious from reading point of view. 2. Put on one line DMI_MATCH() parameters, we already have over the limit lines. 3. Reduce indentation of function parameters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: touchscreen_dmi: Add info for the PiPO W11 tabletTim Josten
Add touchscreen info for the PiPO W11 tablet. Signed-off-by: Tim Josten <timjosten@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: intel_pmc_core: update Comet Lake platform driverHarry Pan
Adding new CML CPU model ID into platform driver support list. Signed-off-by: Harry Pan <harry.pan@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: GPD pocket fan: Allow somewhat lower/higher temperature limitsHans de Goede
Allow the user to configure the fan to turn on / speed-up at lower thresholds then before (20 degrees Celcius as minimum instead of 40) and likewise also allow the user to delay the fan speeding-up till the temperature hits 90 degrees Celcius (was 70). Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: GPD pocket fan: Use default values when wrong modparams are givenHans de Goede
Use our default values when wrong module-parameters are given, instead of refusing to load. Refusing to load leaves the fan at the BIOS default setting, which is "Off". The CPU's thermal throttling should protect the system from damage, but not-loading is really not the best fallback in this case. This commit fixes this by re-setting module-parameter values to their defaults if they are out of range, instead of failing the probe with -EINVAL. Cc: stable@vger.kernel.org Cc: Jason Anderson <jasona.594@gmail.com> Reported-by: Jason Anderson <jasona.594@gmail.com> Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/mellanox: fix potential deadlock in the tmfifo driverLiming Sun
This commit fixes the potential deadlock caused by the console Rx and Tx processing at the same time. Rx and Tx both take the console and tmfifo spinlock but in different order which causes potential deadlock. The fix is to use different tmfifo spinlock for Rx and Tx since they protect different resources and it's safe to split the lock. Below is the reported call trace when copying/pasting large string in the console. Rx: _raw_spin_lock_irqsave (hvc lock) __hvc_poll hvc_poll in_intr vring_interrupt mlxbf_tmfifo_rxtx_one_desc (tmfifo lock) mlxbf_tmfifo_rxtx mlxbf_tmfifo_work_rxtx Tx: _raw_spin_lock_irqsave (tmfifo lock) mlxbf_tmfifo_virtio_notify virtqueue_notify virtqueue_kick put_chars hvc_push hvc_write (hvc lock) ... do_tty_write tty_write Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc") Cc: <stable@vger.kernel.org> # 5.4+ Reviewed-by: David Woods <dwoods@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: intel-ips: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to x86 Platform Specific Drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: intel_telemetry_debugfs: Respect error code of ↵Andy Shevchenko
kstrtou32_from_user() kstrtou32_from_user() may return different error codes on certain circumstances. Respect all possible values. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-10platform/x86: intel_pmc_core: Fix spelling of MHz unitAndy Shevchenko
Fix spelling of MHz unit in a comment. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:46:49 +0000