| Age | Commit message (Collapse) | Author |
|---|
|
Commit 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs") made the
ring pointer always to be reset on resume from suspend. This caused compute
rings to fail since the reset was done without also resetting it for the
firmware. Reset wptr on the GPU to avoid a disconnect between the driver
and firmware wptr.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3911
Fixes: 42cdf6f687da ("drm/amdgpu/gfx8: always restore kcq MQDs")
Signed-off-by: Eeli Haapalainen <eeli.haapalainen@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2becafc319db3d96205320f31cc0de4ee5a93747)
Cc: stable@vger.kernel.org
|
|
Increment the reset counter only if soft recovery succeeded. This is
consistent with a ring hard reset behaviour where counter gets
incremented only if hard reset succeeded.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 25c314aa3ec3d30e4ee282540e2096b5c66a2437)
Cc: stable@vger.kernel.org
|
|
The function radeon_resume_kms() acquires the console lock. It is
inconsistent, as it depends on the notify_client argument. That
lock then covers a number of suspend operations that are unrelated
to the console.
Remove the calls to console_lock() and console_unlock() from the
radeon function. The console lock is only required by DRM's fbdev
emulation, which acquires it as necessary.
Also fixes a possible circular dependency between the console lock
and the client-list mutex, where the mutex is supposed to be taken
first.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fff8e0504499a929f26e2fb7cf7e2c9854e37b91)
|
|
The radeon driver holds the console lock while suspending in-kernel
DRM clients. This creates a circular dependency with the client-list
mutex, which is supposed to be acquired first. Reported when combining
radeon with another DRM driver.
Therefore, do not take the console lock in radeon, but let the fbdev
DRM client acquire the lock when needed. This is what all other DRM
drivers so.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Closes: https://lore.kernel.org/dri-devel/0a087cfd-bd4c-48f1-aa2f-4a3b12593935@oss.qualcomm.com/
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 612ec7c69d04cb58beb1332c2806da9f2f47a3ae)
|
|
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4176
---
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 340231cdceec2c45995d773a358ca3c341f151aa)
Cc: stable@vger.kernel.org
|
|
[WHY]
Free memory to avoid memory leak
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Clayton King <clayton.king@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa699acb8e9be2341ee318077fa119acc7d5f329)
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- fprobe-event: The @params variable was being used in an error path
without being initialized. The fix to return an error code.
* tag 'probes-fixes-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Avoid using params uninitialized in parse_btf_arg()
|
|
without board ID
For GF variant of WCN6855 without board ID programmed
btusb_generate_qca_nvm_name() will chose wrong NVM
'qca/nvm_usb_00130201.bin' to download.
Fix by choosing right NVM 'qca/nvm_usb_00130201_gf.bin'.
Also simplify NVM choice logic of btusb_generate_qca_nvm_name().
Fixes: d6cba4e6d0e2 ("Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Macro parameters should always be put into braces when accessing it.
Fixes: 4fc9857ab8c6 ("Bluetooth: hci_sync: Add check simultaneous roles support")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The provided macro parameter is named 'dev' (rather than 'hdev', which
may be a variable on the stack where the macro is used).
Fixes: a9a830a676a9 ("Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE")
Fixes: 6126ffabba6b ("Bluetooth: Introduce HCI_CONN_FLAG_DEVICE_PRIVACY device flag")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This replaces the usage of HCI_ERROR_REMOTE_USER_TERM, which as the name
suggest is to indicate a regular disconnection initiated by an user,
with HCI_ERROR_AUTH_FAILURE to indicate the session has timeout thus any
pairing shall be considered as failed.
Fixes: 1e91c29eb60c ("Bluetooth: Use hci_disconnect for immediate disconnection from SMP")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If a command is received while a bonding is ongoing consider it a
pairing failure so the session is cleanup properly and the device is
disconnected immediately instead of continuing with other commands that
may result in the session to get stuck without ever completing such as
the case bellow:
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Identity Information (0x08) len 16
Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0
> ACL Data RX: Handle 2048 flags 0x02 dlen 21
SMP: Signing Information (0x0a) len 16
Signature key[16]: 1716c536f94e843a9aea8b13ffde477d
Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX
> ACL Data RX: Handle 2048 flags 0x02 dlen 12
SMP: Identity Address Information (0x09) len 7
Address: XX:XX:XX:XX:XX:XX (Intel Corporate)
While accourding to core spec 6.1 the expected order is always BD_ADDR
first first then CSRK:
When using LE legacy pairing, the keys shall be distributed in the
following order:
LTK by the Peripheral
EDIV and Rand by the Peripheral
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
LTK by the Central
EDIV and Rand by the Central
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
When using LE Secure Connections, the keys shall be distributed in the
following order:
IRK by the Peripheral
BD_ADDR by the Peripheral
CSRK by the Peripheral
IRK by the Central
BD_ADDR by the Central
CSRK by the Central
According to the Core 6.1 for commands used for key distribution "Key
Rejected" can be used:
'3.6.1. Key distribution and generation
A device may reject a distributed key by sending the Pairing Failed command
with the reason set to "Key Rejected".
Fixes: b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
btintel_classify_pkt_type
Due to what seem to be a bug with variant version returned by some
firmwares the code may set hdev->classify_pkt_type with
btintel_classify_pkt_type when in fact the controller doesn't even
support ISO channels feature but may use the handle range expected from
a controllers that does causing the packets to be reclassified as ISO
causing several bugs.
To fix the above btintel_classify_pkt_type will attempt to check if the
controller really supports ISO channels and in case it doesn't don't
reclassify even if the handle range is considered to be ISO, this is
considered safer than trying to fix the specific controller/firmware
version as that could change over time and causing similar problems in
the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219553
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2100565
Link: https://github.com/StarLabsLtd/firmware/issues/180
Fixes: f25b7fd36cc3 ("Bluetooth: Add vendor-specific packet classification for ISO data")
Cc: stable@vger.kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
|
|
random address
Currently, the connectable flag used by the setup of an extended
advertising instance drives whether we require privacy when trying to pass
a random address to the advertising parameters (Own Address).
If privacy is not required, then it automatically falls back to using the
controller's public address. This can cause problems when using controllers
that do not have a public address set, but instead use a static random
address.
e.g. Assume a BLE controller that does not have a public address set.
The controller upon powering is set with a random static address by default
by the kernel.
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6
Address: E4:AF:26:D8:3E:3A (Static)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
Setting non-connectable extended advertisement parameters in bluetoothctl
mgmt
add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g 1
correctly sets Own address type as Random
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036)
plen 25
...
Own address type: Random (0x01)
Setting connectable extended advertisement parameters in bluetoothctl mgmt
add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g -c 1
mistakenly sets Own address type to Public (which causes to use Public
Address 00:00:00:00:00:00)
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036)
plen 25
...
Own address type: Public (0x00)
This causes either the controller to emit an Invalid Parameters error or to
mishandle the advertising.
This patch makes sure that we use the already set static random address
when requesting a connectable extended advertising when we don't require
privacy and our public address is not set (00:00:00:00:00:00).
Fixes: 3fe318ee72c5 ("Bluetooth: move hci_get_random_address() to hci_sync")
Signed-off-by: Alessandro Gasbarroni <alex.gasbarroni@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0]
l2cap_sock_resume_cb() has a similar problem that was fixed by commit
1bff51ea59a9 ("Bluetooth: fix use-after-free error in lock_sock_nested()").
Since both l2cap_sock_kill() and l2cap_sock_resume_cb() are executed
under l2cap_sock_resume_cb(), we can avoid the issue simply by checking
if chan->data is NULL.
Let's not access to the killed socket in l2cap_sock_resume_cb().
[0]:
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:82 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711
Write of size 8 at addr 0000000000000570 by task kworker/u9:0/52
CPU: 1 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Workqueue: hci0 hci_rx_work
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:501 (C)
__dump_stack+0x30/0x40 lib/dump_stack.c:94
dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
print_report+0x58/0x84 mm/kasan/report.c:524
kasan_report+0xb0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
__kasan_check_write+0x20/0x30 mm/kasan/shadow.c:37
instrument_atomic_write include/linux/instrumented.h:82 [inline]
clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711
l2cap_security_cfm+0x524/0xea0 net/bluetooth/l2cap_core.c:7357
hci_auth_cfm include/net/bluetooth/hci_core.h:2092 [inline]
hci_auth_complete_evt+0x2e8/0xa4c net/bluetooth/hci_event.c:3514
hci_event_func net/bluetooth/hci_event.c:7511 [inline]
hci_event_packet+0x650/0xe9c net/bluetooth/hci_event.c:7565
hci_rx_work+0x320/0xb18 net/bluetooth/hci_core.c:4070
process_one_work+0x7e8/0x155c kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3321 [inline]
worker_thread+0x958/0xed8 kernel/workqueue.c:3402
kthread+0x5fc/0x75c kernel/kthread.c:464
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847
Fixes: d97c899bde33 ("Bluetooth: Introduce L2CAP channel callback for resuming")
Reported-by: syzbot+e4d73b165c3892852d22@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/686c12bd.a70a0220.29fe6c.0b13.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the internal microphone in the stated device
Signed-off-by: Lane Odenbach <laodenbach@gmail.com>
Link: https://patch.msgid.link/20250715182038.10048-1-laodenbach@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This platform has an RT711-sdca on link0 and RT1316 on link3.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250716082233.1810334-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A new warning in clang [1] points out that id_reg is uninitialized then
passed to memstick_init_req() as a const pointer:
drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
330 | memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
| ^~~~~~
Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull
warning") intentionally passed this variable uninitialized to avoid an
-Wnonnull warning from a NULL value that was previously there because
id_reg is never read from the call to memstick_init_req() in
h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the
warning, which is likely happening in the majority of builds using
modern compilers that support '-ftrivial-auto-var-init=zero'.
Cc: stable@vger.kernel.org
Fixes: de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2105
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250715-memstick-fix-uninit-const-pointer-v1-1-f6753829c27a@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The ovpn_netdev_write() function is responsible for injecting
decapsulated and decrypted packets back into the local network stack.
Prior to this patch, the skb could retain GSO metadata from the outer,
encrypted tunnel packet. This original GSO metadata, relevant to the
sender's transport context, becomes invalid and misleading for the
tunnel/data path once the inner packet is exposed.
Leaving this stale metadata intact causes internal GSO validation checks
further down the kernel's network stack (validate_xmit_skb()) to fail,
leading to packet drops. The reasons for these failures vary by
protocol, for example:
- for ICMP, no offload handler is registered;
- for TCP and UDP, the respective offload handlers return errors when
comparing skb->len to the outdated skb_shinfo(skb)->gso_size.
By calling skb_gso_reset(skb) we ensure the inner packet is presented to
gro_cells_receive() with a clean state, correctly indicating it is an
individual packet from the perspective of the local stack.
This change eliminates the "Driver has suspect GRO implementation, TCP
performance may be compromised" warning and improves overall TCP
performance by allowing GSO/GRO to function as intended on the
decapsulated traffic.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Reported-by: Gert Doering <gert@greenie.muc.de>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/4
Tested-by: Gert Doering <gert@greenie.muc.de>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
Netlink ops do not expect all attributes to be always set, however
this condition is not explicitly coded any where, leading the user
to believe that all sent attributes are somewhat processed.
Fix this behaviour by introducing explicit checks.
For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the
needed condition in the related ops handlers.
While for all other ops use attribute subsets in the ovpn.yaml spec file.
Fixes: b7a63391aa98 ("ovpn: add basic netlink support")
Reported-by: Ralf Lici <ralf@mandelbit.com>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/19
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
OpenVPN allows users to configure a FW mark on sockets used to
communicate with other peers. The mark is set by means of the
`SO_MARK` Linux socket option.
However, in the ovpn UDP code path, the socket's `sk_mark` value is
currently ignored and it is not propagated to outgoing `skbs`.
This commit ensures proper inheritance of the field by setting
`skb->mark` to `sk->sk_mark` before handing the `skb` to the network
stack for transmission.
Fixes: 08857b5ec5d9 ("ovpn: implement basic TX path (UDP)")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31877.html
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d7694460 ("tracing/probes: Support BTF field access from $retval")
Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: fix fallback-related races
This series contains 3 fixes somewhat related to various races we have
while handling fallback.
The root cause of the issues addressed here is that the check for
"we can fallback to tcp now" and the related action are not atomic. That
also applies to fallback due to MP_FAIL -- where the window race is even
wider.
Address the issue introducing an additional spinlock to bundle together
all the relevant events, as per patch 1 and 2. These fixes can be
backported up to v5.19 and v5.15.
Note that mptcp_disconnect() unconditionally clears the fallback status
(zeroing msk->flags) but don't touch the `allows_infinite_fallback`
flag. Such issue is addressed in patch 3, and can be backported up to
v5.17.
====================
Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-0-391aff963322@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_disconnect() clears the fallback bit unconditionally, without
touching the associated flags.
The bit clear is safe, as no fallback operation can race with that --
all subflow are already in TCP_CLOSE status thanks to the previous
FASTCLOSE -- but we need to consistently reset all the fallback related
status.
Also acquire the relevant lock, to avoid fouling static analyzers.
Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-3-391aff963322@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes: 478d770008b0 ("mptcp: send out MP_FAIL when data checksum fails")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-2-391aff963322@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reported the following splat:
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Modules linked in:
CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline]
RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00
RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45
RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001
RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000
FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432
tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975
tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166
tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925
tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363
ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:469 [inline]
ip_rcv_finish net/ipv4/ip_input.c:447 [inline]
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975
__netif_receive_skb+0x1f/0x120 net/core/dev.c:6088
process_backlog+0x301/0x1360 net/core/dev.c:6440
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453
napi_poll net/core/dev.c:7517 [inline]
net_rx_action+0xb44/0x1010 net/core/dev.c:7644
handle_softirqs+0x1d0/0x770 kernel/softirq.c:579
do_softirq+0x3f/0x90 kernel/softirq.c:480
</IRQ>
<TASK>
__local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407
local_bh_enable include/linux/bottom_half.h:33 [inline]
inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524
mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985
mptcp_check_listen_stop net/mptcp/mib.h:118 [inline]
__mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000
mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066
inet_release+0xed/0x200 net/ipv4/af_inet.c:435
inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x402/0xb70 fs/file_table.c:465
task_work_run+0x150/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xd4/0xe0 kernel/entry/common.c:114
exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
do_syscall_64+0x245/0x360 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc92f8a36ad
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf52802d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 00007ffcf52803a8 RCX: 00007fc92f8a36ad
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007fc92fae7ba0 R08: 0000000000000001 R09: 0000002800000000
R10: 00007fc92f700000 R11: 0000000000000246 R12: 00007fc92fae5fac
R13: 00007fc92fae5fa0 R14: 0000000000026d00 R15: 0000000000026c51
</TASK>
irq event stamp: 4068
hardirqs last enabled at (4076): [<ffffffff81544816>] __up_console_sem+0x76/0x80 kernel/printk/printk.c:344
hardirqs last disabled at (4085): [<ffffffff815447fb>] __up_console_sem+0x5b/0x80 kernel/printk/printk.c:342
softirqs last enabled at (3096): [<ffffffff840e1be0>] local_bh_enable include/linux/bottom_half.h:33 [inline]
softirqs last enabled at (3096): [<ffffffff840e1be0>] inet_csk_listen_stop+0x2c0/0x1070 net/ipv4/inet_connection_sock.c:1524
softirqs last disabled at (3097): [<ffffffff813b6b9f>] do_softirq+0x3f/0x90 kernel/softirq.c:480
Since we need to track the 'fallback is possible' condition and the
fallback status separately, there are a few possible races open between
the check and the actual fallback action.
Add a spinlock to protect the fallback related information and use it
close all the possible related races. While at it also remove the
too-early clearing of allow_infinite_fallback in __mptcp_subflow_connect():
the field will be correctly cleared by subflow_finish_connect() if/when
the connection will complete successfully.
If fallback is not possible, as per RFC, reset the current subflow.
Since the fallback operation can now fail and return value should be
checked, rename the helper accordingly.
Fixes: 0530020a7c8f ("mptcp: track and update contiguous data status")
Cc: stable@vger.kernel.org
Reported-by: Matthieu Baerts <matttbe@kernel.org>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/570
Reported-by: syzbot+5cf807c20386d699b524@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/555
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-1-391aff963322@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multicast good packets received by PF rings that pass ethternet MAC
address filtering are counted for rtnl_link_stats64.multicast. The
counter is not cleared on read. Fix the duplicate counting on updating
statistics.
Fixes: 46b92e10d631 ("net: libwx: support hardware statistics")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jiawen Wu says:
====================
Fix Rx fatal errors
There are some fatal errors on the Rx NAPI path, which can cause
the kernel to crash. Fix known issues and potential risks.
The part of the patches has been mentioned before[1].
[1]: https://lore.kernel.org/all/C8A23A11DB646E60+20250630094102.22265-1-jiawenwu@trustnetic.com/
v1: https://lore.kernel.org/20250709064025.19436-1-jiawenwu@trustnetic.com
====================
Link: https://patch.msgid.link/20250714024755.17512-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When device reset is triggered by feature changes such as toggling Rx
VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The
hardware descriptor ring may retain stale values from previous sessions.
And only set the length to 0 in rx_desc[0] would result in building
malformed SKBs. Fix it to ensure a clean slate after device reset.
[ 549.186435] [ C16] ------------[ cut here ]------------
[ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814!
[ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary)
[ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510
[ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8
[ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282
[ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2
[ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40
[ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e
[ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200
[ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2
[ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000
[ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0
[ 549.186505] [ C16] PKRU: 55555554
[ 549.186507] [ C16] Call Trace:
[ 549.186510] [ C16] <IRQ>
[ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186517] [ C16] __skb_pad+0xc7/0xf0
[ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx]
[ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx]
[ 549.186540] [ C16] __napi_poll+0x28/0x190
[ 549.186544] [ C16] net_rx_action+0x301/0x3f0
[ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50
[ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160
[ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5
[ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0
[ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130
[ 549.186572] [ C16] common_interrupt+0xb8/0xd0
[ 549.186576] [ C16] </IRQ>
[ 549.186577] [ C16] <TASK>
[ 549.186579] [ C16] asm_common_interrupt+0x22/0x40
[ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246
[ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000
[ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3
[ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000
[ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40
[ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000
[ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420
[ 549.186605] [ C16] cpuidle_enter+0x29/0x40
[ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170
[ 549.186613] [ C16] do_idle+0x7a/0xc0
[ 549.186616] [ C16] cpu_startup_entry+0x25/0x30
[ 549.186618] [ C16] start_secondary+0x117/0x140
[ 549.186623] [ C16] common_startup_64+0x13e/0x148
[ 549.186628] [ C16] </TASK>
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wx_rx_buffer structure contained two DMA address fields: 'dma' and
'page_dma'. However, only 'page_dma' was actually initialized and used
to program the Rx descriptor. But 'dma' was uninitialized and used in
some paths.
This could lead to undefined behavior, including DMA errors or
use-after-free, if the uninitialized 'dma' was used. Althrough such
error has not yet occurred, it is worth fixing in the code.
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
[ 876.949834] __irq_exit_rcu+0xc7/0x130
[ 876.949836] common_interrupt+0xb8/0xd0
[ 876.949838] </IRQ>
[ 876.949838] <TASK>
[ 876.949840] asm_common_interrupt+0x22/0x40
[ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420
[ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d
[ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246
[ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000
[ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e
[ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed
[ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580
[ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000
[ 876.949852] ? cpuidle_enter_state+0xb3/0x420
[ 876.949855] cpuidle_enter+0x29/0x40
[ 876.949857] cpuidle_idle_call+0xfd/0x170
[ 876.949859] do_idle+0x7a/0xc0
[ 876.949861] cpu_startup_entry+0x25/0x30
[ 876.949862] start_secondary+0x117/0x140
[ 876.949864] common_startup_64+0x13e/0x148
[ 876.949867] </TASK>
[ 876.949868] ---[ end trace 0000000000000000 ]---
[ 876.949869] ------------[ cut here ]------------
[ 876.949870] list_del corruption, ffffead40445a348->next is NULL
[ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120
[ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E)
[ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi
[ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary)
[ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE
[ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
[ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120
[ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8
[ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282
[ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000
[ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff
[ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150
[ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122
[ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720
[ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000
[ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0
[ 876.949949] PKRU: 55555554
[ 876.949950] Call Trace:
[ 876.949951] <IRQ>
[ 876.949952] __rmqueue_pcplist+0x53/0x2c0
[ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660
[ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400
[ 876.949961] page_pool_alloc_pages+0xa/0x20
[ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx]
[ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx]
[ 876.949971] wx_poll+0x92/0x130 [libwx]
[ 876.949975] __napi_poll+0x28/0x190
[ 876.949977] net_rx_action+0x301/0x3f0
[ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949981] ? profile_tick+0x30/0x70
[ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949986] ? timerqueue_add+0xa3/0xc0
[ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949989] ? __raise_softirq_irqoff+0x16/0x70
[ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5
[ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx]
[ 876.949998] handle_softirqs+0xf9/0x2c0
Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250714024755.17512-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
callback
get_time_fn() callback implementations are expected to fill out the
entire system_counterval_t struct as it may be initially uninitialized.
This broke with the removal of convert_art_to_tsc() helper functions
which left use_nsecs uninitialized.
Initially assign the entire struct with default values.
Fixes: f5e1d0db3f02 ("stmmac: intel: Remove convert_art_to_tsc()")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Blöchl <markus@blochl.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250713-stmmac_crossts-v1-1-31bfe051b5cb@blochl.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-15
Brett Werling's patch for the tcan4x5x glue code driver fixes the
detection of chips which are held in reset/sleep and must be woken up
by GPIO prior to communication.
* tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: fix reset gpio usage during probe
====================
Link: https://patch.msgid.link/20250715101625.3202690-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/
Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com
Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the latest llvm21 compiler, I hit several errors when building bpf
selftests. Some of errors look like below:
test_maps.c:565:40: error: variable 'val' is uninitialized when passed as a
const pointer argument here [-Werror,-Wuninitialized-const-pointer]
565 | assert(bpf_map_update_elem(fd, NULL, &val, 0) < 0 &&
| ^~~
prog_tests/bpf_iter.c:400:25: error: variable 'c' is uninitialized when passed
as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
400 | write(finish_pipe[1], &c, 1);
| ^
Some other errors have similar the pattern as the above.
These errors are fixed by initializing those variables properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250715185910.3659447-1-yonghong.song@linux.dev
|
|
pf->ice_debugfs_pf_fwlog should be checked for an error here.
Fixes: 96a9a9341cda ("ice: configure FW logging")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The function ice_lag_is_switchdev_running() is being called from outside of
the LAG event handler code. This results in the lag->upper_netdev being
NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a
check before it is dereferenced.
Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are 18 devicetree fixes for three arm64 plaforms: Qualcomm
Snapdragon, Rockchips and NXP i.MX. These get updated to more
correctly describe the hardware, fixing issues with:
- real-time clock on Snapdragon based laptops
- SD card detection, PCI probing and HDMI/DDC communication on
Rockchips
- ethernet and SPI probing on certain i.MX based boards
- a regression with the i.MX watchdog
Aside from the devicetree fixes, there are two additional fixes for
the merged ASPEED LPC snoop driver that saw some changes in 6.16, and
one additional driver enabled in arm64 defconfig to fix CPU frequency
scaling"
* tag 'soc-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
arm64: dts: freescale: imx8mm-verdin: Keep LDO5 always on
soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled
soc: aspeed: lpc-snoop: Cleanup resources in stack-order
arm64: dts: imx95: Correct the DMA interrupter number of pcie0_ep
arm64: dts: rockchip: Add missing fan-supply to rk3566-quartz64-a
arm64: dts: rockchip: use cs-gpios for spi1 on ringneck
arm64: dts: add big-endian property back into watchdog node
arm64: dts: imx95-15x15-evk: fix the overshoot issue of NETC
arm64: dts: imx95-19x19-evk: fix the overshoot issue of NETC
arm64: dts: rockchip: list all CPU supplies on ArmSoM Sige5
arm64: dts: imx8mp-venice-gw74xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw73xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw72xx: fix TPM SPI frequency
arm64: dts: imx8mp-venice-gw71xx: fix TPM SPI frequency
arm64: dts: qcom: x1e80100: describe uefi rtc offset
arm64: dts: qcom: sc8280xp-x13s: describe uefi rtc offset
arm64: defconfig: Enable Qualcomm CPUCP mailbox driver
arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi 4B
arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi CM5
arm64: dts: rockchip: Adjust the HDMI DDC IO driver strength for rk3588
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- one warning cleanup introduced in the last PR (Andy Shevchenko)
- a nasty syzbot buffer underflow fix co-debugged with Alan Stern
(Benjamin Tissoires)
* tag 'hid-for-linus-2025071501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: add a test case for the recent syzbot underflow
HID: core: do not bypass hid_hw_raw_request
HID: core: ensure __hid_request reserves the report ID as the first byte
HID: core: ensure the allocated report buffer can contain the reserved report ID
HID: debug: Remove duplicate entry (BTN_WHEEL)
|
|
The function dw_edma_pcie_probe() in dw-edma-pcie.c triggered a
frame size warning:
ld.lld:warning:
drivers/dma/dw-edma/dw-edma-pcie.c:162:0: stack frame size (1040) exceeds limit (1024) in function 'dw_edma_pcie_probe'
This patch reduces the stack usage by dynamically allocating the
`vsec_data` structure using kmalloc(), rather than placing it on
the stack. This eliminates the overflow warning and improves kernel
robustness.
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20250705160055.808165-1-abinashsinghlalotra@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The nbpf->chan[] array is allocated earlier in the nbpf_probe() function
and it has "num_channels" elements. These three loops iterate one
element farther than they should and corrupt memory.
The changes to the second loop are more involved. In this case, we're
copying data from the irqbuf[] array into the nbpf->chan[] array. If
the data in irqbuf[i] is the error IRQ then we skip it, so the iterators
are not in sync. I added a check to ensure that we don't go beyond the
end of the irqbuf[] array. I'm pretty sure this can't happen, but it
seemed harmless to add a check.
On the other hand, after the loop has ended there is a check to ensure
that the "chan" iterator is where we expect it to be. In the original
code we went one element beyond the end of the array so the iterator
wasn't in the correct place and it would always return -EINVAL. However,
now it will always be in the correct place. I deleted the check since
we know the result.
Cc: stable@vger.kernel.org
Fixes: b45b262cefd5 ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b13c5225-7eff-448c-badc-a2c98e9bcaca@sabinyo.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When phy->ref_clk is NULL PTR_ERR(NULL) will be a success. Fix this by
using -ENOENT when phy->ref_clk is NULL instead.
Fixes: 80090810f5d3 ("phy: qcom: Add QCOM SNPS eUSB2 driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aDCbeuCTy9zyWJAM@stanley.mountain/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250710172403.2593193-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
TRAINING_PATTERN_SET
Commit a3ef3c2da675 ("drm/dp: Change AUX DPCD probe address from
DPCD_REV to LANE0_1_STATUS") stopped using the DPCD_REV register for
DPCD probing, since this results in link training failures at least when
using an Intel Barlow Ridge TBT hub at UHBR link rates (the
DP_INTRA_HOP_AUX_REPLY_INDICATION never getting cleared after the failed
link training). Since accessing DPCD_REV during link training is
prohibited by the DP Standard, LANE0_1_STATUS (0x202) was used instead,
as it falls within the Standard's valid register address range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) and it fixed the link
training on the above TBT hub.
However, reading the LANE0_1_STATUS register also has a side-effect at
least on a Novatek eDP panel, as reported on the Closes: link below,
resulting in screen flickering on that panel. One clear side-effect when
doing the 1-byte probe reads from LANE0_1_STATUS during link training
before reading out the full 6 byte link status starting at the same
address is that the panel will report the link training as completed
with voltage swing 0. This is different from the normal, flicker-free
scenario when no DPCD probing is done, the panel reporting the link
training complete with voltage swing 2.
Using the TRAINING_PATTERN_SET register for DPCD probing doesn't have
the above side-effect, the panel will link train with voltage swing 2 as
expected and it will stay flicker-free. This register is also in the
above valid register range and is unlikely to have a side-effect as that
of LANE0_1_STATUS: Reading LANE0_1_STATUS is part of the link training
CR/EQ sequences and so it may cause a state change in the sink - even if
inadvertently as I suspect in the case of the above Novatek panel. As
opposed to this, reading TRAINING_PATTERN_SET is not part of the link
training sequence (it must be only written once at the beginning of the
CR/EQ sequences), so it's unlikely to cause any state change in the
sink.
As a side-note, this Novatek panel also lacks support for TPS3, while
claiming support for HBR2, which violates the DP Standard (the Standard
mandating TPS3 for HBR2).
Besides the Novatek panel (PSR 1), which this change fixes, I also
verified the change on a Samsung (PSR 1) and an Analogix (PSR 2) eDP
panel as well as on the Intel Barlow Ridge TBT hub.
Note that in the drm-tip tree (targeting the v6.17 kernel version) the
i915 and xe drivers keep DPCD probing enabled only for the panel known
to require this (HP ZR24w), hence those drivers in drm-tip are not
affected by the above problem.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Fixes: a3ef3c2da675 ("drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS")
Reported-and-tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14558
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250708212331.112898-1-imre.deak@intel.com
(cherry picked from commit bba9aa41654036534d86b198f5647a9ce15ebd7f)
[Imre: Rebased on drm-intel-fixes]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Changed original commit hash to match with the one propagated in fixes]
|
|
The mentioned test is not very stable when running on top of
debug kernel build. Increase the inter-packet timeout to allow
more slack in such environments.
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b0370c06ddb3235debf642c17de0284b2cd3c652.1752163107.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After commit aa7a9275ab81 ("PM: sleep: Suspend async parents after
suspending children"), the following scenario is possible:
1. Device A is async and it depends on device B that is sync.
2. Async suspend is scheduled for A before the processing of B is
started.
3. A is waiting for B.
4. In the meantime, an unrelated device fails to suspend and returns
an error.
5. The processing of B doesn't start at all and its power.completion is
not updated.
6. A is still waiting for B when async_synchronize_full() is called.
7. Deadlock ensues.
To prevent this from happening, update power.completion for all devices
on errors in all suspend phases, but do not do it directly for devices
that are already being processed or are waiting for the processing to
start because in those cases it may be necessary to wait for the
processing to actually complete before updating power.completion for
the device.
Fixes: aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending children")
Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous")
Closes: https://lore.kernel.org/linux-pm/e13740a0-88f3-4a6f-920f-15805071a7d6@linaro.org/
Reported-and-tested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/6191258.lOV4Wx5bFT@rjwysocki.net
|
|
The recently introduced support for freezing filesystems during system
suspend included calls to filesystems_freeze() in both suspend_prepare()
and enter_state(), as well as calls to filesystems_thaw() in both
suspend_finish() and the Unlock path in enter_state(). These are
redundant.
Moreover, calling filesystems_freeze() twice, from both suspend_prepare()
and enter_state(), leads to a black screen and makes the system unable
to resume in some cases.
Address this as follows:
- filesystems_freeze() is already called in suspend_prepare(), which
is the proper and consistent place to handle pre-suspend operations.
The second call in enter_state() is unnecessary and so remove it.
- filesystems_thaw() is invoked in suspend_finish(), which covers
successful suspend/resume paths. In the failure case, add a call
to filesystems_thaw() only when needed, avoiding the duplicate call
in the general Unlock path.
This change simplifies the suspend code and avoids repeated freeze/thaw
calls, while preserving correct ordering and behavior.
Fixes: eacfbf74196f ("power: freeze filesystems during suspend/resume")
Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn>
Link: https://patch.msgid.link/20250712030824.81474-1-zhangzihuan@kylinos.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pm_restore_gfp_mask() call added by commit 12ffc3b1513e ("PM:
Restrict swap use to later in the suspend sequence") to
suspend_devices_and_enter() is done too early because it takes
place before calling dpm_resume() in dpm_resume_end() and some
swap-backing devices may not be ready at that point. Moreover,
dpm_resume_end() called subsequently in the same code path invokes
pm_restore_gfp_mask() again and calling it twice in a row is
pointless.
Drop the misplaced pm_restore_gfp_mask() call from
suspend_devices_and_enter() to address this issue.
Fixes: 12ffc3b1513e ("PM: Restrict swap use to later in the suspend sequence")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2810409.mvXUDI8C0e@rjwysocki.net
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 7796c97df6b1b2206681a07f3c80f6023a6593d5.
This patch broke Dragonboard 845c (sdm845). I see:
Unexpected kernel BRK exception at EL1
Internal error: BRK handler: 00000000f20003e8 [#1] SMP
pc : qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom]
lr : snd_soc_dai_set_channel_map+0x34/0x78
Call trace:
qcom_swrm_set_channel_map+0x7c/0x80 [soundwire_qcom] (P)
sdm845_dai_init+0x18c/0x2e0 [snd_soc_sdm845]
snd_soc_link_init+0x28/0x6c
snd_soc_bind_card+0x5f4/0xb0c
snd_soc_register_card+0x148/0x1a4
devm_snd_soc_register_card+0x50/0xb0
sdm845_snd_platform_probe+0x124/0x148 [snd_soc_sdm845]
platform_probe+0x6c/0xd0
really_probe+0xc0/0x2a4
__driver_probe_device+0x7c/0x130
driver_probe_device+0x40/0x118
__device_attach_driver+0xc4/0x108
bus_for_each_drv+0x8c/0xf0
__device_attach+0xa4/0x198
device_initial_probe+0x18/0x28
bus_probe_device+0xb8/0xbc
deferred_probe_work_func+0xac/0xfc
process_one_work+0x244/0x658
worker_thread+0x1b4/0x360
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Kernel panic - not syncing: BRK handler: Fatal exception
Dan has also reported following issues with the original patch
https://lore.kernel.org/all/33fe8fe7-719a-405a-9ed2-d9f816ce1d57@sabinyo.mountain/
Bug #1:
The zeroeth element of ctrl->pconfig[] is supposed to be unused. We
start counting at 1. However this code sets ctrl->pconfig[0].ch_mask = 128.
Bug #2:
There are SLIM_MAX_TX_PORTS (16) elements in tx_ch[] array but only
QCOM_SDW_MAX_PORTS + 1 (15) in the ctrl->pconfig[] array so it corrupts
memory like Yongqin Liu pointed out.
Bug 3:
Like Jie Gan pointed out, it erases all the tx information with the rx
information.
Cc: stable@vger.kernel.org # v6.15+
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Acked-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250709174949.8541-1-amit.pundir@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
