summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-18tools/bpf: bpftool: improve output format for bpftool netYonghong Song
This is a followup patch for Commit f6f3bac08ff9 ("tools/bpf: bpftool: add net support"). Some improvements are made for the bpftool net output. Specially, plain output is more concise such that per attachment should nicely fit in one line. Compared to previous output, the prog tag is removed since it can be easily obtained with program id. Similar to xdp attachments, the device name is added to tc attachments. The bpf program attached through shared block mechanism is supported as well. $ ip link add dev v1 type veth peer name v2 $ tc qdisc add dev v1 ingress_block 10 egress_block 20 clsact $ tc qdisc add dev v2 ingress_block 10 egress_block 20 clsact $ tc filter add block 10 protocol ip prio 25 bpf obj bpf_shared.o sec ingress flowid 1:1 $ tc filter add block 20 protocol ip prio 30 bpf obj bpf_cyclic.o sec classifier flowid 1:1 $ bpftool net xdp: tc: v2(7) clsact/ingress bpf_shared.o:[ingress] id 23 v2(7) clsact/egress bpf_cyclic.o:[classifier] id 24 v1(8) clsact/ingress bpf_shared.o:[ingress] id 23 v1(8) clsact/egress bpf_cyclic.o:[classifier] id 24 The documentation and "bpftool net help" are updated to make it clear that current implementation only supports xdp and tc attachments. For programs attached to cgroups, "bpftool cgroup" can be used to dump attachments. For other programs e.g. sk_{filter,skb,msg,reuseport} and lwt/seg6, iproute2 tools should be used. The new output: $ bpftool net xdp: eth0(2) driver id 198 tc: eth0(2) clsact/ingress fbflow_icmp id 335 act [{icmp_action id 336}] eth0(2) clsact/egress fbflow_egress id 334 $ bpftool -jp net [{ "xdp": [{ "devname": "eth0", "ifindex": 2, "mode": "driver", "id": 198 } ], "tc": [{ "devname": "eth0", "ifindex": 2, "kind": "clsact/ingress", "name": "fbflow_icmp", "id": 335, "act": [{ "name": "icmp_action", "id": 336 } ] },{ "devname": "eth0", "ifindex": 2, "kind": "clsact/egress", "name": "fbflow_egress", "id": 334 } ] } ] Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-18Merge tag 'gvt-fixes-2018-09-18' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2018-09-18 - Fix initial DPIO PHY register state for BXT (Colin) - BXT untracked GEN9_CLKGATE_DIS_4 warning fix (Colin) - Fix srcu lock for GFN valid check (Weinan) - Should clear GGTT entry value after vGPU destroy (Zhipeng) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180918073349.GQ20737@zhen-hp.sh.intel.com
2018-09-18intel_th: pci: Add Ice Lake PCH supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Ice Lake PCH. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18intel_th: Fix resource handling for ACPI glue layerAlexander Shishkin
The core of the driver expects the resource array from the glue layer to be indexed by even numbers, as is the case for 64-bit PCI resources. This doesn't hold true for others, ACPI in this instance, which leads to an out-of-bounds access and an ioremap() on whatever address that access fetches. This patch fixes the problem by reading resource array differently based on whether the 64-bit flag is set, which would indicate PCI glue layer. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: ebc57e399b8e ("intel_th: Add ACPI glue layer") CC: stable@vger.kernel.org # v4.17+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18intel_th: Fix device removal logicAlexander Shishkin
Commit a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") brings in new subdevice addition/removal logic that's broken for "host mode": the SWITCH device has no children to begin with, which is not handled in the code. This results in a null dereference bug later down the path. This patch fixes the subdevice removal code to handle host mode correctly. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: a753bfcfdb1f ("intel_th: Make the switch allocate its subdevices") CC: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18tty: vt_ioctl: fix potential Spectre v1Gustavo A. R. Silva
vsa.console is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/tty/vt/vt_ioctl.c:711 vt_ioctl() warn: potential spectre issue 'vc_cons' [r] Fix this by sanitizing vsa.console before using it to index vc_cons Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18tty: Drop tty->count on tty_reopen() failureDmitry Safonov
In case of tty_ldisc_reinit() failure, tty->count should be decremented back, otherwise we will never release_tty(). Tetsuo reported that it fixes noisy warnings on tty release like: pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0)) Fixes: commit 892d1fa7eaae ("tty: Destroy ldisc instance on hangup") Cc: stable@vger.kernel.org # v4.6+ Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Reviewed-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Jiri Slaby <jslaby@suse.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: cpm_uart: return immediately from console pollChristophe Leroy
kgdb expects poll function to return immediately and returning NO_POLL_CHAR when no character is available. Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll") Cc: Jason Wessel <jason.wessel@windriver.com> Cc: <stable@vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18tty: serial: lpuart: avoid leaking struct tty_structStefan Agner
The function tty_port_tty_get() gets a reference to the tty. Since the code is not using tty_port_tty_set(), the reference is kept even after closing the tty. Avoid using tty_port_tty_get() by directly access the tty instance. Since lpuart_start_rx_dma() is called from the .startup() and .set_termios() callback, it is safe to assume the tty instance is valid. Cc: stable@vger.kernel.org # v4.9+ Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: mvebu-uart: Fix reporting of effective CSIZE to userspaceJan Kiszka
Apparently, this driver (or the hardware) does not support character length settings. It's apparently running in 8-bit mode, but it makes userspace believe it's in 5-bit mode. That makes tcsetattr with CS8 incorrectly fail, breaking e.g. getty from busybox, thus the login shell on ttyMVx. Fix by hard-wiring CS8 into c_cflag. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18perf Documentation: Fix out-of-tree asciidoctor man page generationBen Hutchings
The dependency for the man page rule using asciidoctor incorrectly specifies a source file in $(OUTPUT). When building out-of-tree, the source file is not found, resulting in a fall-back to the following rule which uses xmlto. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180916151704.GF4765@decadent.org.uk Fixes: ffef80ecf89f ("perf Documentation: Support for asciidoctor") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-18tools lib bpf: Provide wrapper for strerror_r to build in !_GNU_SOURCE systemsArnaldo Carvalho de Melo
Same problem that got fixed in a similar fashion in tools/perf/ in c8b5f2c96d1b ("tools: Introduce str_error_r()"), fix it in the same way, licensing needs to be sorted out to libbpf to use libapi, so, for this simple case, just get the same wrapper in tools/lib/bpf. This makes libbpf and its users (bpftool, selftests, perf) to build again in Alpine Linux 3.[45678] and edge. Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Yonghong Song <yhs@fb.com> Fixes: 1ce6a9fc1549 ("bpf: fix build error in libbpf with EXTRA_CFLAGS="-Wp, -D_FORTIFY_SOURCE=2 -O2"") Link: https://lkml.kernel.org/r/20180917151636.GA21790@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-18Merge tag 'kvm-ppc-fixes-4.19-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD Second set of PPC KVM fixes for 4.19 Two fixes for KVM on POWER machines. Both of these relate to memory corruption and host crashes seen when transparent huge pages are enabled. The first fixes a host crash that can occur when a DMA mapping is removed by the guest and the page mapped was part of a transparent huge page; the second fixes corruption that could occur when a hypervisor page fault for a radix guest is being serviced at the same time that the backing page is being collapsed or split.
2018-09-18Merge tag 'kvm-s390-master-4.19-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for 4.19 - more fallout from the hugetlbfs enablement - bugfix for vma handling
2018-09-18drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers.Dave Airlie
vgem seems to oops on the intel CI due to the vgem debugfs init hitting this path now. Check if we have mode_config funcs before checking one. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180918062018.24942-1-airlied@gmail.com
2018-09-18Merge tag 'soundwire-4.19-fixes' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus Vinod writes: soundwire fixes for 4.19 - fixes in bus for - bus lock on master release - incorrect exit after stream configuration - duplicate stream state assignment
2018-09-18mtd: devices: m25p80: Make sure the buffer passed in op is DMA-ableBoris Brezillon
As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be DMA-able, and commit 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") failed to follow this rule as buffers passed to ->{read,write}_reg() are usually placed on the stack. Fix that by allocating a scratch buffer and copying the data around. Fixes: 4120f8d158ef ("mtd: spi-nor: Use the spi_mem_xx() API") Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
2018-09-18Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman
Dave writes: "Various fixes, all over the place: 1) OOB data generation fix in bluetooth, from Matias Karhumaa. 2) BPF BTF boundary calculation fix, from Martin KaFai Lau. 3) Don't bug on excessive frags, to be compatible in situations mixing older and newer kernels on each end. From Juergen Gross. 4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger. 5) Zero keying information in TLS layer before freeing copies of them, from Sabrina Dubroca. 6) Fix NULL deref in act_sample, from Davide Caratti. 7) Orphan SKB before GRO in veth to prevent crashes with XDP, from Toshiaki Makita. 8) Fix use after free in ip6_xmit, from Eric Dumazet. 9) Fix VF mac address regression in bnxt_en, from Micahel Chan. 10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann. 11) Programming adjustments to r8169 which fix not being to enter deep sleep states on some machines, from Kai-Heng Feng and Hans de Goede. 12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter Oskolkov." * gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits) net/ipv6: do not copy dst flags on rt init qmi_wwan: set DTR for modems in forced USB2 mode clk: x86: Stop marking clocks as CLK_IS_CRITICAL r8169: Get and enable optional ether_clk clock clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail r8169: enable ASPM on RTL8106E r8169: Align ASPM/CLKREQ setting function with vendor driver Revert "kcm: remove any offset before parsing messages" kcm: remove any offset before parsing messages net: ethernet: Fix a unused function warning. net: dsa: mv88e6xxx: Fix ATU Miss Violation tls: fix currently broken MSG_PEEK behavior hv_netvsc: pair VF based on serial number PCI: hv: support reporting serial number as slot information bnxt_en: Fix VF mac address regression. ipv6: fix possible use-after-free in ip6_xmit() net: hp100: fix always-true check for link up state ARM: dts: at91: add new compatibility string for macb on sama5d3 net: macb: disable scatter-gather for macb on sama5d3 net: mvpp2: let phylink manage the carrier state ...
2018-09-17net: mdio: remove duplicated include from mdio_bus.cYueHaibing
Remove duplicated include linux/gpio/consumer.h Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17qed: remove duplicated include from qed_cxt.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17liquidio: remove duplicated include from lio_vf_rep.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17cxgb4: remove duplicated include from cxgb4_main.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net/ipv6: do not copy dst flags on rt initPeter Oskolkov
DST_NOCOUNT in dst_entry::flags tracks whether the entry counts toward route cache size (net->ipv6.sysctl.ip6_rt_max_size). If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented in dist_init() and decremented in dst_destroy(). This flag is tied to allocation/deallocation of dst_entry and should not be copied from another dst/route. Otherwise it can happen that dst_ops::pcpuc_entries counter grows until no new routes can be allocated because the counter reached ip6_rt_max_size due to DST_NOCOUNT not set and thus no counter decrements on gc-ed routes. Fixes: 3b6761d18bc1 ("net/ipv6: Move dst flags to booleans in fib entries") Cc: David Ahern <dsahern@gmail.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: Peter Oskolkov <posk@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17gianfar: remove duplicated include from gianfar.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18drm/i915/gvt: clear ggtt entries when destroy vgpuZhipeng Gong
When one vgpu is destroyed, its ggtt entries are not cleared. This patch clears ggtt entries to avoid information leak. v2: add 'Fixes' tag (Zhenyu) Fixes: 2707e4446688 ("drm/i915/gvt: vGPU graphics memory virtualization") Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com> Reviewed-by: Hang Yuan <hang.yuan@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-18drm/i915/gvt: request srcu_read_lock before checking if one gfn is validWeinan Li
Fix the suspicious RCU usage issue in intel_vgpu_emulate_mmio_write. Here need to request the srcu read lock of kvm->srcu before doing gfn_to_memslot(). The detailed log is as below: [ 218.710688] ============================= [ 218.710690] WARNING: suspicious RCU usage [ 218.710693] 4.14.15-dd+ #314 Tainted: G U [ 218.710695] ----------------------------- [ 218.710697] ./include/linux/kvm_host.h:575 suspicious rcu_dereference_check() usage! [ 218.710699] other info that might help us debug this: [ 218.710702] rcu_scheduler_active = 2, debug_locks = 1 [ 218.710704] 1 lock held by qemu-system-x86/2144: [ 218.710706] #0: (&gvt->lock){+.+.}, at: [<ffffffff816a1eea>] intel_vgpu_emulate_mmio_write+0x5a/0x2d0 [ 218.710721] stack backtrace: [ 218.710724] CPU: 0 PID: 2144 Comm: qemu-system-x86 Tainted: G U 4.14.15-dd+ #314 [ 218.710727] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.1.1 10/07/2015 [ 218.710729] Call Trace: [ 218.710734] dump_stack+0x7c/0xb3 [ 218.710739] gfn_to_memslot+0x15f/0x170 [ 218.710743] kvm_is_visible_gfn+0xa/0x30 [ 218.710746] intel_vgpu_emulate_gtt_mmio_write+0x267/0x3c0 [ 218.710751] ? __mutex_unlock_slowpath+0x3b/0x260 [ 218.710754] intel_vgpu_emulate_mmio_write+0x182/0x2d0 [ 218.710759] intel_vgpu_rw+0xba/0x170 [kvmgt] [ 218.710763] intel_vgpu_write+0x14d/0x1a0 [kvmgt] [ 218.710767] __vfs_write+0x23/0x130 [ 218.710770] vfs_write+0xb0/0x1b0 [ 218.710774] SyS_pwrite64+0x73/0x90 [ 218.710777] entry_SYSCALL_64_fastpath+0x25/0x9c [ 218.710780] RIP: 0033:0x7f33e8a91da3 [ 218.710783] RSP: 002b:00007f33dddc8700 EFLAGS: 00000293 v2: add 'Fixes' tag, refine log format.(Zhenyu) Fixes: cc753fbe1ac4 ("drm/i915/gvt: validate gfn before set shadow page") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-17net/ipv4: defensive cipso option parsingStefan Nuernberger
commit 40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed a possible infinite loop in the IP option parsing of CIPSO. The fix assumes that ip_options_compile filtered out all zero length options and that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist. While this assumption currently holds true, add explicit checks for zero length and invalid length options to be safe for the future. Even though ip_options_compile should have validated the options, the introduction of new one-byte options can still confuse this code without the additional checks. Signed-off-by: Stefan Nuernberger <snu@amazon.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Simon Veith <sveith@amazon.de> Cc: stable@vger.kernel.org Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handlerColin Xu
Host prints lots of untracked MMIO at 0x4653c when creating linux guest. "gvt: vgpu 2: untracked MMIO 0004653c len 4" GEN9_CLKGATE_DIS_4 (0x4653c) is accessed by i915 for gmbus clockgating. However vgpu doesn't support any clockgating powergating operations on related mmio access trap so need add it to default handler. GEN9_CLKGATE_DIS_4 is accessed in bxt_gmbus_clock_gating() which only applies to GEN9_LP so doens't show the warning on other platforms. The solution is to add it to default handler init_bxt_mmio_info(). Reviewed-by: He, Min <min.he@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-18drm/i915/gvt: Init PHY related registers for BXTColin Xu
Recent patch fixed the call trace "ERROR Port B enabled but PHY powered down? (PHY_CTL 00000000)". but introduced another similar call trace shown as: "ERROR Port C enabled but PHY powered down? (PHY_CTL 00000200)". The call trace will appear when host and guest enabled different ports, i.e. host using PORT C or neither PORT is enabled, while guest is always using PORT B as simulated by gvt. The issue is actually covered previously before the commit and reverals now when the commit do the right thing. On BXT, some PHY registers are initialized by vbios, before i915 loaded. Later i915 will re-program some, or skip some based on the implementation. The initialized mmio for guest i915 is done by gvt, based on the snapshot taken from host. If host and guest have different PORT enabled, some DPIO PHY mmios that gvt initialized for guest i915 will not match the simualted monitor for guest, which leads to guest i915 print the calltrace when it's trying to enable PHY and PORT. The solution is to init these DPIO PHY registers to default value, then guest i915 will program them to reasonable value based on the default powerwell table and enabled PORT. Together with the old patch, all similar call trace in guest kernel on BXT can be resolved. v2: Move PHY register init to intel_vgpu_reset_mmio (Min) v3: Do not delete empty line in issue fix patch. (zhenyu) Fixes: c8ab5ac30ccc ("drm/i915/gvt: Make correct handling to vreg BXT_PHY_CTL_FAMILY") Reviewed-by: He, Min <min.he@intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-17qmi_wwan: set DTR for modems in forced USB2 modeBjørn Mork
Recent firmware revisions have added the ability to force these modems to USB2 mode, hiding their SuperSpeed capabilities from the host. The driver has been using the SuperSpeed capability, as shown by the bcdUSB field of the device descriptor, to detect the need to enable the DTR quirk. This method fails when the modems are forced to USB2 mode by the modem firmware. Fix by unconditionally enabling the DTR quirk for the affected device IDs. Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Reported-by: Fred Veldini <fred.veldini@gmail.com> Reported-by: Deshu Wen <dwen@sierrawireless.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: socionext: Fix two sleep-in-atomic-context bugs in ave_rxfifo_reset()Jia-Ju Bai
The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.17 are: [FUNC] usleep_range drivers/net/ethernet/socionext/sni_ave.c, 892: usleep_range in ave_rxfifo_reset drivers/net/ethernet/socionext/sni_ave.c, 932: ave_rxfifo_reset in ave_irq_handler [FUNC] usleep_range drivers/net/ethernet/socionext/sni_ave.c, 888: usleep_range in ave_rxfifo_reset drivers/net/ethernet/socionext/sni_ave.c, 932: ave_rxfifo_reset in ave_irq_handler To fix these bugs, usleep_range() is replaced with udelay(). These bugs are found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: caif: remove redundant null check on frontpktColin Ian King
It is impossible for frontpkt to be null at the point of the null check because it has been assigned from rearpkt and there is no way rearpkt can be null at the point of the assignment because of the sanity checking and exit paths taken previously. Remove the redundant null check. Detected by CoverityScan, CID#114434 ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17Merge branch 'r8169-clk-fixes'David S. Miller
Hans de Goede says: ==================== r8169 (x86) clk fixes to fix S0ix not being reached This series adds code to the r8169 ethernet driver to get and enable an external clock if present, avoiding the need for a hack in the clk-pmc-atom driver where that clock was left on continuesly causing x86 some devices to not reach deep power saving states (S0ix) when suspended causing to them to quickly drain their battery while suspended. The 3 commits in this series need to be merged in order to avoid regressions while bisecting. The clk-pmc-atom driver does not see much changes (it was last touched over a year ago). So the clk maintainers have agreed with merging all 3 patches through the net tree. All 3 patches have Stephen Boyd's Acked-by for this purpose. This v2 of the series only had some minor tweaks done to the commit messages and is ready for merging through the net tree now. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17clk: x86: Stop marking clocks as CLK_IS_CRITICALHans de Goede
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver has been modified to get and enable this clock (if present) the marking of the clocks as CLK_IS_CRITICAL is no longer necessary. This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail devices not being able to reach S0i3 greatly decreasing their battery drain when suspended. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: Get and enable optional ether_clk clockHans de Goede
On some boards a platform clock is used as clock for the r8169 chip, this commit adds support for getting and enabling this clock (assuming it has an "ether_clk" alias set on it). This is related to commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") which is a previous attempt to fix this for some x86 boards, but this causes all Cherry Trail SoC using boards to not reach there lowest power states when suspending. This commit (together with an atom-pmc-clk driver commit adding the alias) fixes things properly by making the r8169 get the clock and enable it when it needs it. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17clk: x86: add "ether_clk" alias for Bay Trail / Cherry TrailHans de Goede
Commit d31fd43c0f9a ("clk: x86: Do not gate clocks enabled by the firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on all the time, resulting on the device not being able to reach S0i2 or S0i3 when suspended. The reason for this commit is that on some Bay Trail / Cherry Trail devices the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk" alias, so that the relevant ethernet drivers can try to (optionally) use this, without needing X86 specific code / hacks, thus fixing ethernet on these devices without breaking S0i3 support. This commit uses clkdev_hw_create() to create the alias, mirroring the code for the already existing "mclk" alias for pmc_plt_clk_3. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102 Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861 Cc: Johannes Stezenbach <js@sig21.net> Cc: Carlo Caione <carlo@endlessm.com> Reported-by: Johannes Stezenbach <js@sig21.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: enable ASPM on RTL8106EKai-Heng Feng
The Intel SoC was prevented from entering lower idle state because of RTL8106E's ASPM was not enabled. So enable ASPM on RTL8106E (chip version 39). Now the Intel SoC can enter lower idle state, power consumption and temperature are much lower. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17r8169: Align ASPM/CLKREQ setting function with vendor driverKai-Heng Feng
There's a small delay after setting ASPM in vendor drivers, r8101 and r8168. In addition, those drivers enable ASPM before ClkReq, also change that to align with vendor driver. I haven't seen anything bad becasue of this, but I think it's better to keep in sync with vendor driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17Revert "kcm: remove any offset before parsing messages"David S. Miller
This reverts commit 072222b488bc55cce92ff246bdc10115fd57d3ab. I just read that this causes regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17kcm: remove any offset before parsing messagesDominique Martinet
The current code assumes kcm users know they need to look for the strparser offset within their bpf program, which is not documented anywhere and examples laying around do not do. The actual recv function does handle the offset well, so we can create a temporary clone of the skb and pull that one up as required for parsing. The pull itself has a cost if we are pulling beyond the head data, measured to 2-3% latency in a noisy VM with a local client stressing that path. The clone's impact seemed too small to measure. This bug can be exhibited easily by implementing a "trivial" kcm parser taking the first bytes as size, and on the client sending at least two such packets in a single write(). Note that bpf sockmap has the same problem, both for parse and for recv, so it would pulling twice or a real pull within the strparser logic if anyone cares about that. Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creationLyude Paul
As pointed out by Daniel Vetter, we should be usinng drm_drv_uses_atomic_modeset() for determining whether or not we want to make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as the former isn't an accurate representation of whether or not the driver is actually using atomic modesetting internally (even though it might not be exposing atomic capabilities). Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
2018-09-17ring-buffer: Allow for rescheduling when removing pagesVaibhav Nagarnaik
When reducing ring buffer size, pages are removed by scheduling a work item on each CPU for the corresponding CPU ring buffer. After the pages are removed from ring buffer linked list, the pages are free()d in a tight loop. The loop does not give up CPU until all pages are removed. In a worst case behavior, when lot of pages are to be freed, it can cause system stall. After the pages are removed from the list, the free() can happen while the work is rescheduled. Call cond_resched() in the loop to prevent the system hangup. Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com Cc: stable@vger.kernel.org Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic") Reported-by: Jason Behmer <jbehmer@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-17net/mlx5e: TLS, Read capabilities only when it is safeSaeed Mahameed
Read TLS caps from the core driver only when TLS is supported, i.e mlx5_accel_is_tls_device returns true. Fixes: 790af90c00d2 ("net/mlx5e: TLS, build TLS netdev from capabilities") Change-Id: I5f21ff4d684901af487e366a7e0cf032b54ee9cf Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-09-17net/mlx5: Check for SQ and not RQ state when modifying hairpin SQAlaa Hleihel
When modifying hairpin SQ, instead of checking if the next state equals to MLX5_SQC_STATE_RDY, we compare it against the MLX5_RQC_STATE_RDY enum value. The code worked since both of MLX5_RQC_STATE_RDY and MLX5_SQC_STATE_RDY have the same value today. This patch fixes this issue. Fixes: 18e568c390c6 ("net/mlx5: Hairpin pair core object setup") Change-Id: I6758aa7b4bd137966ae28206b70648c5bc223b46 Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-17net/mlx5: Fix read from coherent memoryEli Cohen
Use accessor function READ_ONCE to read from coherent memory modified by the device and read by the driver. This becomes most important in preemptive kernels where cond_resched implementation does not have the side effect which guaranteed the updated value. Fixes: 269d26f47f6f ("net/mlx5: Reduce command polling interval") Change-Id: Ie6deeb565ffaf76777b07448c7fbcce3510bbb8a Signed-off-by: Eli Cohen <eli@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-17Merge tag 'spi-fix-v4.19-rc4' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Mark writes: "spi: Fixes for v4.19 As well as one driver fix there's a couple of fixes here which address issues with the use of IDRs for allocation of dynamic bus numbers, ensuring that dynamic bus numbers interact well with static bus numbers assigned via DT and otherwise." * tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE spi: Fix double IDR allocation with DT aliases spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
2018-09-17media: platform: fix cros-ec-cec build errorRandy Dunlap
Fix build when MFD_CROS_EC is not enabled but COMPILE_TEST=y. Fixes this build error: ERROR: "cros_ec_cmd_xfer_status" [drivers/media/platform/cros-ec-cec/cros-ec-cec.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-17Merge tag 'asoc-v4.19-rc4' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.19 This is the usual set of small fixes scatterd around various drivers, plus one fix for DAPM and a UAPI build fix. There's not a huge amount that stands out here relative to anything else.
2018-09-17Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2018-09-17 please apply the following patchset to net-next. This brings more restructuring of qeth's transmit code (eliminating its last usage of skb_realloc_headroom()), and the usual mix of minor improvements & cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17s390/qeth: reduce 0-initializing when building IPA cmdsJulian Wiedmann
qeth_get_ipacmd_buffer() obtains its buffers for building IPA cmds from __qeth_get_buffer(), where they are fully cleared. So get rid of all the additional zero-ing in various other places. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 06:22:48 +0000