| Age | Commit message (Collapse) | Author |
|---|
|
Dr. David Alan Gilbert says:
====================
qed deadcoding
This is a set of deadcode removals for the qed ethernet
device. I've tried to avoid removing anything that
are trivial firmware wrappers.
One odd one I've not removed is qed_bw_update(),
it doesn't seem to be called but looks like the only
caller of the bw_update(..) method which qedf does
define. Perhaps qed_bw_update is supposed to be called
somewhere?
====================
Link: https://patch.msgid.link/20250414005247.341243-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_db_recovery_dp() was added in 2018 as part of
commit 36907cd5cd72 ("qed: Add doorbell overflow recovery mechanism")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-6-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While most of the trace code is reachable by other routes
(I think mostly via the qed_features_lookup[] array), there
are a couple of unused wrappers.
qed_print_mcp_trace_line() and qed_print_mcp_trace_results_cont()
were added in 2018 as part of
commit a3f723079df8 ("qed*: Utilize FW 8.37.7.0")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-5-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_ptt_invalidate() was added in 2015 as part of
commit fe56b9e6a8d9 ("qed: Add module with basic common support")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-4-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_calc_session_ctx_validation() and qed_calc_task_ctx_validation()
were added as part of 2017's
commit da09091732ae ("qed*: Utilize FW 8.33.1.0")
but have remained unused.
Remove them.
This leaves; con_region_offsets[], task_region_offsets[],
cdu_crc8_table and qed_calc_cdu_validation_byte() unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-3-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qed_memset_session_ctx() and qed_memset_task_ctx() were added in 2017
as part of
commit da09091732ae ("qed*: Utilize FW 8.33.1.0")
but have not been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414005247.341243-2-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AFAICS this function has never had a user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ab7b8094-2eea-4e82-a047-fd60117f220b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: various small and unrelated improvements
Here are various unrelated patches:
- Patch 1: sched: remove unused structure.
- Patch 2: sched: split the validation part, a preparation for later.
- Patch 3: pm: clarify code, not to think there is a possible UaF.
Note: a previous version has already been sent individually to Netdev.
- Patch 4: subflow: simplify subflow_hmac_valid by passing subflow_req.
- Patch 5: mib: add counter for MPJoin rejected by the PM.
- Patch 6: selftests: validate this new MPJoinRejected counter.
- Patch 7: selftests: define nlh variable only where needed.
- Patch 8: selftests: show how to use IPPROTO_MPTCP with getaddrinfo.
Note: a previous version has already been sent individually to Netdev.
v1: https://lore.kernel.org/20250411-net-next-mptcp-sched-mib-sft-misc-v1-0-85ac8c6654c3@kernel.org
====================
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-0-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_connect.c is a startup tutorial of MPTCP programming, however
there is a lack of ai_protocol(IPPROTO_MPTCP) usage. Add comment for
getaddrinfo MPTCP support.
This patch first uses IPPROTO_MPTCP to get addrinfo, and if glibc
version is too old, it falls back to using IPPROTO_TCP.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-8-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's strange that 'nlh' variable is set to NULL in get_mptcpinfo() and then
this NULL pointer is passed to recv_nlmsg(). In fact, this variable should
be defined in recv_nlmsg(), not get_mptcpinfo().
So this patch drops this useless 'nlh' parameter of recv_nlmsg() and define
'nlh' variable in recv_nlmsg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-7-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The parent commit adds this new counter, incremented when receiving a
connection request, if the PM didn't allow the creation of new subflows.
Most of the time, it is then kept at 0, except when the PM limits cause
the receiver side to reject new MPJoin connections. This is the case in
the following tests:
- single subflow, limited by server
- multiple subflows, limited by server
- subflows limited by server w cookies
- userspace pm type rejects join
- userspace pm type prevents mp_prio
Simply set join_syn_rej=1 when checking the MPJoin counters for these
tests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-6-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This counter is useful to understand why some paths are rejected, and
not created as expected.
It is incremented when receiving a connection request, if the PM didn't
allow the creation of new subflows.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-5-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
subflow_hmac_valid() needs to access the MPTCP socket and the subflow
request, but not the request sock that is passed in argument.
Instead, the subflow request can be directly passed to avoid getting it
via an additional cast.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-4-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e4c28e3d5c090 ("mptcp: pm: move generic PM helpers to pm.c")
removed an unnecessary if-check, which resulted in returning a freed
pointer.
This still works due to the implicit boolean conversion when returning
the freed pointer from mptcp_remove_anno_list_by_saddr(), but it can be
confusing and potentially error-prone. To improve clarity, add a local
variable to explicitly return a boolean value instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-3-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new interface .validate has been added in struct bpf_struct_ops
recently. This patch prepares a future struct_ops support by
implementing it as a new helper mptcp_validate_scheduler() for struct
mptcp_sched_ops.
In this helper, check whether the required ops "get_subflow" of struct
mptcp_sched_ops has been implemented.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-2-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up of commit b68b106b0f15 ("mptcp: sched: reduce size
for unused data"), now removing the mptcp_sched_data structure.
Now is a good time to do that, because the previously mentioned WIP work
has been updated, no longer depending on this structure.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-1-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because of the addition of support for 25G/40G devices, update the module
description.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250414022421.375101-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs fix from Jan Kara:
"Fix a case where isofs could be reading beyond end of the passed
file handle if its type was incorrectly set"
* tag 'fs_for_v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Prevent the use of too small fid
|
|
If userspace reads "uevent" device attribute at the same time as another
threads unbinds the device from its driver, change to dev->driver from a
valid pointer to NULL may result in crash. Fix this by using READ_ONCE()
when fetching the pointer, and take bus' drivers klist lock to make sure
driver instance will not disappear while we access it.
Use WRITE_ONCE() when setting the driver pointer to ensure there is no
tearing.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-3-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to closing a race when reading driver pointer in
dev_uevent() code, instead of setting device->driver pointer directly
introduce device_set_driver() helper.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-2-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit c0a40097f0bc81deafc15f9195d1fb54595cd6d0.
Probing a device can take arbitrary long time. In the field we observed
that, for example, probing a bad micro-SD cards in an external USB card
reader (or maybe cards were good but cables were flaky) sometimes takes
longer than 2 minutes due to multiple retries at various levels of the
stack. We can not block uevent_show() method for that long because udev
is reading that attribute very often and that blocks udev and interferes
with booting of the system.
The change that introduced locking was concerned with dev_uevent()
racing with unbinding the driver. However we can handle it without
locking (which will be done in subsequent patch).
There was also claim that synchronization with probe() is needed to
properly load USB drivers, however this is a red herring: the change
adding the lock was introduced in May of last year and USB loading and
probing worked properly for many years before that.
Revert the harmful locking.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-1-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The original commit message and the wording "uncork" in the code comment
indicate that it is expected that the suppressed event instances are
automatically sent after unsuppressing.
This is not the case, instead they are discarded.
In effect this means that no "changed" events are emitted on the device
itself by default.
While each discovered partition does trigger a changed event on the
device, devices without partitions don't have any event emitted.
This makes udev miss the device creation and prompted workarounds in
userspace. See the linked util-linux/losetup bug.
Explicitly emit the events and drop the confusingly worded comments.
Link: https://github.com/util-linux/util-linux/issues/2434
Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.
Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The driver should detect whether the device entered FW rollback
mode and then notify user with the dedicated message including
FW and NVM versions.
Even if the driver detected rollback mode, this should not result
in an probe error and the normal flow proceeds.
FW tries to rollback to "old" operational FW located in the
inactive NVM bank in cases when newly loaded FW exhibits faulty
behavior. If something goes wrong during boot the FW may switch
into rollback mode in an attempt to avoid recovery mode and stay
operational. After rollback is successful, the banks are swapped,
and the "rollback" bank becomes the active bank for the next reset.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add E610 implementation of fw_recovery_mode MAC operation.
In case of E610 information about recovery mode is obtained
from FW_MODES field in IXGBE_GL_MNG_FWSM register (0x000B6134).
Introduce recovery specific probing flow and init only
vital features.
User should be able to perform NVM update using devlink
once FW error is detected in order to load a healthy img.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add E610 specific function checking whether the FW API version
is compatible with the driver expectations.
The major API version should be less than or equal to the expected
API version. If not the driver won't be fully operational.
Check the minor version, and if it is more than two versions lesser
or greater than the expected version, print a message indicating
that the NVM or driver should be updated respectively.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The E610 adapters contain an embedded chip with firmware which can be
updated using devlink flash. The firmware which runs on this chip is
referred to as the Embedded Management Processor firmware (EMP
firmware).
Activating the new firmware image currently requires that the system be
rebooted. This is not ideal as rebooting the system can cause unwanted
downtime.
The EMP firmware itself can be reloaded by issuing a special update
to the device called an Embedded Management Processor reset (EMP
reset). This reset causes the device to reset and reload the EMP
firmware.
Implement support for devlink reload with the "fw_activate" flag. This
allows user space to request the firmware be activated immediately.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Use the pldmfw library to implement device flash update for
the Intel ixgbe networking device driver specifically for E610 devices.
This support uses the devlink flash update interface.
Using the pldmfw library, the provided firmware file will be scanned for
the three major components, "fw.undi" for the Option ROM, "fw.mgmt" for
the main NVM module containing the primary device firmware, and
"fw.netlist" containing the netlist module.
The flash is separated into two banks, the active bank containing the
running firmware, and the inactive bank which we use for update. Each
module is updated in a staged process. First, the inactive bank is
erased, preparing the device for update. Second, the contents of the
component are copied to the inactive portion of the flash. After all
components are updated, the driver signals the device to switch the
active bank during the next EMP reset.
With this implementation, basic flash update for the E610 hardware is
supported.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add functions reading inactive versions from the inactive flash
bank.
Print stored versions for the content present in the inactive bank.
If there's pending update the versions reflect the ones which
are going to be loaded after reload. If there's no pending update
both running and stored are the same, which means there won't
be any NVM change on reload.
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce 2 E610 specific callbacks implementations:
-ixgbe_start_hw_e610() which expands the regular .start_hw callback with
getting FW version information
-ixgbe_read_pba_string_e610() which gets Product Board Assembly string
Extend EEPROM ops with new .read_pba_string in order to distinguish
generic one and the E610 one.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
E610 devices give possibility to show more detailed info than the previous
boards.
Extend reporting NVM info with following pieces:
fw.mgmt.api -> version number of the API
fw.mgmt.build -> identifier of the source for the FW
fw.mgmt.srev -> number defining FW's security revision
fw.psid.api -> version defining the format of the flash contents
fw.undi.srev -> number defining OROM's security revision
fw.netlist -> version of the netlist module
fw.netlist.build -> first 4 bytes of the netlist hash
Co-developed-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add functions reading the netlist version info and use them
as a part of the setting NVM info procedure.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add functions reading the OROM version info and use them
as a part of the setting NVM info procedure.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Read NVM related info from the flash.
Add several helper functions used to access the flash data,
find memory banks, calculate offsets, calculate the flash size.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Provide devlink .info_get() callback implementation to allow the
driver to report detailed version information. The following info
is reported:
"serial_number" -> The PCI DSN of the adapter
"fw.bundle_id" -> Unique identifier for the combined flash image
"fw.undi" -> Version of the Option ROM containing the UEFI driver
"board.id" -> The PBA ID string
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add an initial support for devlink interface to ixgbe driver.
Similarly to i40e driver the implementation doesn't enable
devlink to manage device-wide configuration. Devlink instance
is created for each physical function of PCIe device.
Create separate directory for devlink related ixgbe files
and use naming scheme similar to the one used in the ice driver.
Add a stub for Documentation, to be extended by further patches.
Change struct ixgbe_adapter allocation to be done by devlink (Przemek),
as suggested by Jiri.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Wrap use of netdev_priv() in order to change the allocator of the device
private structure from alloc_etherdev_mq() to the devlink in next commit.
All but one netdev_priv() calls in the whole driver are replaced, the
remaining one is called on MACVLAN (so not ixgbe) device.
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Prevent from proceeding if there's nothing to print.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
For single pdev device, radio number of a device is forced as 1 in
ath12k_wmi_ext_soc_hal_reg_caps_parse(). This leads to ah->num_radio == 1
and then in ath12k_mac_setup_iface_combinations() we report to
mac/cfg80211 that only 1 channel is supported. In MLO case, it finally
results in failing to bring up the second link as it is in another
channel.
Change num_different_channels to 2 to allow a second link. Since DFS on
multiple channels are not supported yet, remove radar_detect_widths.
For now WCN7850 is the only single pdev device, so others should not be
affected.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-9-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The primary link check bypasses REO queue setup for non-primary links
in ath12k_dp_rx_peer_tid_setup(), this works for QCN9274 but breaks
WCN7850 as WCN7850 needs it to be done for each link peer.
Add a new hardware parameter to differentiate them.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-8-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In MLO case, all link peers share the same REO queue, so the queue
should be allocated only once, currently this is done by checking
primary_link flag in ath12k_dp_rx_peer_tid_setup(). However, the
check not only avoids duplicate allocation, but also bypasses sending
queue configuration to firmware for non-primary links. In an upcoming
patch, changes will be added to make this check no-ops for WCN7850,
as WCN7850 firmware needs to be explicitly notified each link peer's
queue configuration. That said, the duplicate allocation would arise
again after that change, hence it needs to be resolved before hand.
Since all link peers share the same queue, it should be allocated per
MLD peer, not per link peer. So change to do allocation once and save
it in MLD peer, link peers can simply get queue configuration from
there.
Also relocate ath12k_reoq_buf structure to core.h to avoid circular
dependency.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-7-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently vaddr, paddr and size fields are located together with other
fields in ath12k_dp_rx_tid structure. Logically they represents the
REO queue buffer so better to group them in an individual structure.
Introduce a new structure ath12k_reoq_buf to group them. This improves
code readability, and benefits the upcoming patch where this structure
is heavily accessed.
While at it, change vaddr type to 'void *' since it is actually not
pointing to any u32 buffer. Also rename paddr as paddr_aligned to better
reflect its actual meaning.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-6-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In MLO scenario WCN7850 firmware requests the assoc link to associate
before any other links. However currently in
ath12k_mac_op_vif_cfg_changed() we are doing association in an ascending
order of link id. If the assoc link does not get assigned the smallest
id, a non-assoc link gets associated first and firmware crashes.
Change to do association for the assoc link first.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-5-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
In MLO scenario, for station mode interface, WCN7850 firmware requests
the assoc link vdev to get started before any other link vdevs starts.
Firmware internally checks assoc_link field of
wmi_vdev_start_mlo_params.flags when the first vdev starts. And if the
check fails firmware crashes.
Current connection flow guarantees the assoc link vdev gets started
first (at assoc stage only one link vdev is created/started, i.e. the
assoc link vdev), however the assoc_link flag is never set, resulting
in WCN7850 firmware crash.
Note ath12k_link_sta structure already has is_assoc_link flag, and it
is properly set for assoc link. However we can not use it because it
won't be available before peer gets created, which is too late for vdev
starts.
So add a new flag 'is_sta_assoc_link' in ath12k_link_vif structure and
set it when deflink vdev is created. This is valid because we always
use deflink as the assoc link. This flag is passed to firmware vdev
starts to avoid firmware crash. Also verify the link vif/sta pair has
the same settings when creating link sta.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-4-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently firmware MLO capability is validated via firmware IE, however
WCN7850 firmware does not support this method but instead advertises
MLO by single_chip_mlo_support bit in QMI phy capability message.
Change to consider single_chip_mlo_support bit as well for MLO capability
validation.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-3-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently fw_features is used to check if a specific feature is supported
or not: if the feature bit is set the feature is believed to be supported,
otherwise not supported. Since fw_features is populated only when using
firmware API-2, and by default it is zero, in case of API-1 such as
WCN7850 firmware it is possible that a feature is not enabled by host
while actually firmware supports it.
To avoid this, add a new flag indicating whether fw_features has been ever
populated or not, and only when that flag is true we choose to believe
fw_features. This benefits firmware MLO capability validation in an
upcoming patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-2-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
There are several places checking if a specific bit set in
ab->fw.fw_features, and in an upcoming patch additional check needs to be
added at all places.
Introduce a new helper ath12k_fw_feature_supported() to avoid code
duplication.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-1-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status,
modifies and writes the entire value back. Since, the IRQ status bit
gets cleared on writing back, the better approach is to directly write
the bitmask to the register in order to preserve the value.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic while accessing IRQ handler associated with the
generated IRQ. This is done by acquiring the spinlock and storing the
current interrupt state before handling the interrupt request using
generic_handle_irq.
A previous fix patch was submitted where 'generic_handle_irq' was
replaced with 'handle_nested_irq'. However, this change also causes
the kernel panic where after determining which GPIO triggered the
interrupt and attempting to call handle_nested_irq with the mapped
IRQ number, leads to a failure in locating the registered handler.
Fixes: 194f9f94a516 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
register_chrdev will only register the first 256 minors of a major chrdev.
That means that dynamically allocated misc devices with minor above 255
will fail to open with -ENXIO.
This was found by kernel test robot when testing a different change that
makes all dynamically allocated minors be above 255. This has, however,
been separately tested by creating 256 serio_raw devices with the help of
userio driver.
Ever since allowing misc devices with minors above 128, this has been
possible.
Fix it by registering all minor numbers from 0 to MINORMASK + 1 for
MISC_MAJOR.
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202503171507.6c8093d0-lkp@intel.com
Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/20250317-misc-chrdev-v1-1-6cd05da11aef@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
