| Age | Commit message (Collapse) | Author |
|---|
|
The Driver unintentionally programs ctrl reg to clear the fifo, which
happens after the start of transaction. Previously, this was not an issue
as it involved read-modified-write. However, this issue breaks i2c reads
on QEMU, as i2c-read is executed before guest starts programming control
register.
Fixes: ff0cf7bca630 ("i2c: cadence: Remove unnecessary register reads")
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Once the gpio mux driver binds to the "i2c-mux-gpio" platform device,
this creates the i2c adapters for the muxed child segments.
We can use the bus notifier mechanism to check for creation of the
child i2c adapters, and call i2c_register_spd() for them. This allows
to detect all DIMM's on systems with more than 8 memory slots.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Extend the RIIC driver to support the RZ/V2H(P) ("R9A09G057") SoC. It
accomplishes this by appending the compatible string list and passing
the RZ/V2H-specific OF data.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
With an increasing number of SoCs reusing this driver, each with slight
variations in the RIIC IP, it becomes necessary to support passing these
details as OF data. This approach simplifies the extension of the driver
for other SoCs.
This patch lays the groundwork for adding support for the Renesas RZ/V2H
SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Introduce helper functions for performing I2C read and write operations
in the RIIC driver.
These helper functions lay the groundwork for adding support for the
RZ/V2H SoC. This is essential because the register offsets for the RZ/V2H
SoC differ from those of the RZ/A SoC. By abstracting the read and write
operations, we can seamlessly adapt the driver to support different SoC
variants without extensive modifications.
This patch is part of the preparation process for integrating support for
the RZ/V2H SoC into the RIIC driver.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document support for the I2C Bus Interface (RIIC) available in the
Renesas RZ/V2H(P) (R9A09G057) SoC.
The RIIC interface in the Renesas RZ/V2H(P) differs from RZ/A in a
couple of ways:
- Register offsets for the RZ/V2H(P) SoC differ from those of the
RZ/A SoC.
- RZ/V2H register access is limited to 8-bit, whereas RZ/A supports
8/16/32-bit.
- RZ/V2H has bit differences in the slave address register.
To accommodate these differences, a new compatible string
"renesas,riic-r9a09g057" is added.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Convert the NXP PNX I2C Controller bindings to DT schema.
Keep only one example in DT schema to remove redundancy.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
|
|
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
Link: https://lore.kernel.org/lkml/0000000000002d631f0615918f1e@google.com/
Reported-by: syzbot+045b454ab35fd82a35fb@syzkaller.appspotmail.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the next upgrade to the Rust toolchain, from 1.77.1 to 1.78.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
It is much smaller than previous upgrades, since the `alloc` fork was
dropped in commit 9d0441bab775 ("rust: alloc: remove our fork of the
`alloc` crate") [3].
# Unstable features
There have been no changes to the set of unstable features used in
our own code. Therefore, the only unstable features allowed to be used
outside the `kernel` crate is still `new_uninit`.
However, since we finally dropped our `alloc` fork [3], all the unstable
features used by `alloc` (~30 language ones, ~60 library ones) are not
a concern anymore. This reduces the maintenance burden, increases the
chances of new compiler versions working without changes and gets us
closer to the goal of supporting several compiler versions.
It also means that, ignoring non-language/library features, we are
currently left with just the few language features needed to implement the
kernel `Arc`, the `new_uninit` library feature, the `compiler_builtins`
marker and the few `no_*` `cfg`s we pass when compiling `core`/`alloc`.
Please see [4] for details.
# Required changes
## LLVM's data layout
Rust 1.77.0 (i.e. the previous upgrade) introduced a check for matching
LLVM data layouts [5]. Then, Rust 1.78.0 upgraded LLVM's bundled major
version from 17 to 18 [6], which changed the data layout in x86 [7]. Thus
update the data layout in our custom target specification for x86 so
that the compiler does not complain about the mismatch:
error: data-layout for target `target-5559158138856098584`,
`e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128`,
differs from LLVM target's `x86_64-linux-gnu` default layout,
`e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128`
In the future, the goal is to drop the custom target specifications.
Meanwhile, if we want to support other LLVM versions used in `rustc`
(e.g. for LTO), we will need to add some extra logic (e.g. conditional on
LLVM's version, or extracting the data layout from an existing built-in
target specification).
## `unused_imports`
Rust's `unused_imports` lint covers both unused and redundant imports.
Now, in 1.78.0, the lint detects more cases of redundant imports [8].
Thus one of the previous patches cleaned them up.
## Clippy's `new_without_default`
Clippy now suggests to implement `Default` even when `new()` is `const`,
since `Default::default()` may call `const` functions even if it is not
`const` itself [9]. Thus one of the previous patches implemented it.
# Other changes in Rust
Rust 1.78.0 introduced `feature(asm_goto)` [10] [11]. This feature was
discussed in the past [12].
Rust 1.78.0 introduced `feature(const_refs_to_static)` [13] to allow
referencing statics in constants and extended `feature(const_mut_refs)`
to allow raw mutable pointers in constants. Together, this should cover
the kernel's `VTABLE` use case. In fact, the implementation [14] in
upstream Rust added a test case for it [15].
Rust 1.78.0 with debug assertions enabled (i.e. `-Cdebug-assertions=y`,
kernel's `CONFIG_RUST_DEBUG_ASSERTIONS=y`) now always checks all unsafe
preconditions, though without a way to opt-out for particular cases [16].
It would be ideal to have a way to selectively disable certain checks
per-call site for this one (i.e. not just per check but for particular
instances of a check), even if the vast majority of the checks remain
in place [17].
Rust 1.78.0 also improved a couple issues we reported when giving feedback
for the new `--check-cfg` feature [18] [19].
# `alloc` upgrade and reviewing
As mentioned above, compiler upgrades will not update `alloc` anymore,
since we dropped our `alloc` fork [3].
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1780-2024-05-02 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://lore.kernel.org/rust-for-linux/20240328013603.206764-1-wedsonaf@gmail.com/ [3]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [4]
Link: https://github.com/rust-lang/rust/pull/120062 [5]
Link: https://github.com/rust-lang/rust/pull/120055 [6]
Link: https://reviews.llvm.org/D86310 [7]
Link: https://github.com/rust-lang/rust/pull/117772 [8]
Link: https://github.com/rust-lang/rust-clippy/pull/10903 [9]
Link: https://github.com/rust-lang/rust/pull/119365 [10]
Link: https://github.com/rust-lang/rust/issues/119364 [11]
Link: https://lore.kernel.org/rust-for-linux/ZWipTZysC2YL7qsq@Boquns-Mac-mini.home/ [12]
Link: https://github.com/rust-lang/rust/issues/119618 [13]
Link: https://github.com/rust-lang/rust/pull/120932 [14]
Link: https://github.com/rust-lang/rust/pull/120932/files#diff-e6fc1622c46054cd46b1d225c5386c5554564b3b0fa8a03c2dc2d8627a1079d9 [15]
Link: https://github.com/rust-lang/rust/issues/120969 [16]
Link: https://github.com/Rust-for-Linux/linux/issues/354 [17]
Link: https://github.com/rust-lang/rust/pull/121202 [18]
Link: https://github.com/rust-lang/rust/pull/121237 [19]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240401212303.537355-4-ojeda@kernel.org
[ Added a few more details and links I mentioned in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix error logging and check user-supplied data when injecting an
error in the versal EDAC driver
* tag 'edac_urgent_for_v6.9_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Do not log total error counts
EDAC/versal: Check user-supplied data before injecting an error
EDAC/versal: Do not register for NOC errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix incorrect delay handling in the plpks (keystore) code
- Fix a panic when an LPAR boots with a frozen PE
Thanks to Andrew Donnellan, Gaurav Batra, Nageswara R Sastry, and Nayna
Jain.
* tag 'powerpc-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE
powerpc/pseries: make max polling consistent for longer H_CALLs
|
|
Rust's `unused_imports` lint covers both unused and redundant imports.
In the upcoming 1.78.0, the lint detects more cases of redundant imports
[1], e.g.:
error: the item `bindings` is imported redundantly
--> rust/kernel/print.rs:38:9
|
38 | use crate::bindings;
| ^^^^^^^^^^^^^^^ the item `bindings` is already defined by prelude
Most cases are `use crate::bindings`, plus a few other items like `Box`.
Thus clean them up.
Note that, in the `bindings` case, the message "defined by prelude"
above means the extern prelude, i.e. the `--extern` flags we pass.
Link: https://github.com/rust-lang/rust/pull/117772 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240401212303.537355-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In the upcoming Rust 1.78.0, Clippy suggests to implement `Default` even
when `new()` is `const`, since `Default::default()` may call `const`
functions even if it is not `const` itself [1]:
error: you should consider adding a `Default` implementation for `LockClassKey`
--> rust/kernel/sync.rs:31:5
|
31 | / pub const fn new() -> Self {
32 | | Self(Opaque::uninit())
33 | | }
| |_____^
Thus implement it.
Link: https://github.com/rust-lang/rust-clippy/pull/10903 [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240401212303.537355-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Remove the broken vsyscall emulation code from
the page fault code
- Fix kexec crash triggered by certain SEV RMP
table layouts
- Fix unchecked MSR access error when disabling
the x2APIC via iommu=off
* tag 'x86-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove broken vsyscall emulation code from the page fault code
x86/apic: Don't access the APIC when disabling x2APIC
x86/sev: Add callback to apply RMP table fixups for kexec
x86/e820: Add a new e820 table update helper
|
|
Add some basics explained by Miguel in [1] to the documentation.
And connect it with some hints where this is implemented in the
kernel.
Link: https://www.linuxfoundation.org/webinars/rust-for-linux-writing-abstractions-and-drivers [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240418070618.3962736-1-dirk.behme@de.bosch.com
[ Reworded first section for better clarity and some minor nits.
Changed link into Link tag, use tabs for code block
indentation and wrap at 80. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add section describing how to build and run the Rust kselftest.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Valentin Obst <kernel@valentinobst.de>
Link: https://lore.kernel.org/r/20240405153841.320459-1-laura.nao@collabora.com
[ Formatted paths as inline code literals. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix suspicious RCU usage in __do_softirq()"
* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Fix suspicious RCU usage in __do_softirq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for reported problems for
6.9-rc7. Included in here are:
- usb core fixes for found issues
- typec driver fixes for reported problems
- usb gadget driver fixes for reported problems
- xhci build fixes
- dwc3 driver fixes for reported issues
All of these have been in linux-next this past week with no reported
problems"
* tag 'usb-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Check for port partner validity before consuming it
usb: typec: tcpm: enforce ready state when queueing alt mode vdm
usb: typec: tcpm: unregister existing source caps before re-registration
usb: typec: tcpm: clear pd_event queue in PORT_RESET
usb: typec: tcpm: queue correct sop type in tcpm_queue_vdm_unlocked
usb: Fix regression caused by invalid ep0 maxpacket in virtual SuperSpeed device
usb: ohci: Prevent missed ohci interrupts
usb: typec: qcom-pmic: fix pdphy start() error handling
usb: typec: qcom-pmic: fix use-after-free on late probe errors
usb: gadget: f_fs: Fix a race condition when processing setup packets.
USB: core: Fix access violation during port device removal
usb: dwc3: core: Prevent phy suspend during init
usb: xhci-plat: Don't include xhci.h
usb: gadget: uvc: use correct buffer size when parsing configfs lists
usb: gadget: composite: fix OS descriptors w_value logic
usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a new ID for ASUS ROG RAIKIRI controllers added to xpad driver
- amimouse driver structure annotated with __refdata to prevent section
mismatch warnings.
* tag 'input-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: amimouse - mark driver struct with __refdata to prevent section mismatch
Input: xpad - add support for ASUS ROG RAIKIRI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Avoid a deadlock in the Qualcomm clk driver by making the regulator
which supplies the GDSC optional
- Restore RPM clks on Qualcomm msm8976 by setting num_clks
- Fix Allwinner H6 CPU rate changing logic to avoid system crashes by
temporarily reparenting the CPU clk to something that isn't being
changed
- Set a MIPI PLL min/max rate on Allwinner A64 to fix blank screens
on some devices
- Revert back to of_match_device() in the Samsung clkout driver to
get the match data based on the parent device's compatible string"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: Revert "clk: Use device_get_match_data()"
clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI
clk: sunxi-ng: common: Support minimum and maximum rate
clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
|
|
This makes the LEDs on the TS409 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the Net2big Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the MV2120 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the D-Link DNS323 Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
This makes the LEDs on the D2Net Orion5x board use GPIO
descriptors instead of hardcoded GPIOs from the global
numberspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Rust doctests implicitly include `kernel::prelude::*`.
Removes explicit `kernel::prelude` imports from doctests.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1064
Signed-off-by: Nell Shamrell-Harrington <nells@linux.microsoft.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240411225331.274662-1-nells@linux.microsoft.com
[ Add it back for `module_phy_driver`'s example since it is within a `mod`,
and thus it cannot be removed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In Rust 1.76.0, the `dbg!()` macro was updated to also format the column
number. The reason cited was usage of a few characters worth of
horizontal space while allowing direct jumps to the source location. [1]
Link: https://github.com/rust-lang/rust/pull/114962 [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1065
Signed-off-by: Raghav Narang <dev@raxyte.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/eba70259-9b10-4bf7-ac4f-d7accf6b8891@smtp-relay.sendinblue.com
[ Fixed commit author name and removed spurious newline in message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
s/directly the bindings/the bindings directly/
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240411205428.537700-1-thorsten.blum@toblux.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The initializers created by the `[try_][pin_]init!` macros utilize the
guard pattern to drop already initialized fields, when initialization
fails mid-way. These guards are generated to have the same name as the
field that they handle. To prevent namespacing issues [1] when the
field name is the same as e.g. a constant name, add `__` as a prefix
and `_guard` as the suffix.
[ Gary says:
"Here's the simplified example:
```
macro_rules! f {
() => {
let a = 1;
let _: u32 = a;
}
}
const a: u64 = 1;
fn main() {
f!();
}
```
The `a` in `f` have a different hygiene so normally it is scoped to the
macro expansion and wouldn't escape. Interestingly a constant is still
preferred despite the hygiene so constants escaped into the macro,
leading to the error."
- Miguel ]
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/1e8a2a1f-abbf-44ba-8344-705a9cbb1627@proton.me/ [1]
Link: https://lore.kernel.org/r/20240403194321.88716-1-benno.lossin@proton.me
[ Added Benno's link and Gary's simplified example. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Decrement the refcount of an `Arc`, but handle the case where it hits
zero by taking ownership of the now-unique `Arc`, instead of destroying
and deallocating it.
This is a dependency of the linked list that Rust Binder uses. The
linked list uses this method as part of its `ListArc` abstraction [1].
Boqun Feng has authored the examples.
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240402-linked-list-v1-1-b1c59ba7ae3b@google.com [1]
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240402-arc-for-list-v4-2-54db6440a9a9@google.com
[ Replace `try_new` with `new` in example since we now have the new
allocation APIs. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Allows access to a value in an `Arc` that is currently held as a raw
pointer due to use of `Arc::into_raw`, without destroying or otherwise
consuming that raw pointer.
This is a dependency of the linked list that Rust Binder uses. The
linked list uses this method when iterating over the linked list [1].
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240402-linked-list-v1-6-b1c59ba7ae3b@google.com [1]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240402-arc-for-list-v4-1-54db6440a9a9@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The Espressobin Ultra DTS includes Espressobin DTSI which defines
ethernet-switch@1 node. The Ultra DTS overrides "reg" to 3, but that
leaves still old unit address which conflicts with the new phy@1 node
(W=1 dtc warning):
armada-3720-espressobin.dtsi:148.29-203.4: Warning (unique_unit_address_if_enabled): /soc/internal-regs@d0000000/mdio@32004/ethernet-switch@1: duplicate unit-address (also used in node /soc/internal-regs@d0000000/mdio@32004/ethernet-phy@1)
Fix this by deleting ethernet-switch@1 node and merging original node
with code from Ultra DTS into new ethernet-switch@3.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:
armada-3720-turris-mox.dts:218.10-255.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/spi@10600/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
The ethernet-switch node does not have children with unit addresses, so
address/size-cells are not really correct, as reported by dtc W=1
warning:
armada-3720-eDPU.dts:26.19-60.4: Warning (avoid_unnecessary_addr_size): /soc/internal-regs@d0000000/mdio@32004/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
This probably also fixes dtbs_check warning, but I could not find it, so
not sure about that.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Fix a warning reported by robot kernel test that 'fw_entry' in function
'tas2781_load_calibration' is used uninitialized with compiler
sh4-linux-gcc (GCC) 13.2.0, an update of copyright and a correction of the
comments.
Fixes: ef3bcde75d06 ("ASoc: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20240505122346.1326-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now that most of the code moves are done, we can add a new module and
the required EXPORT_SYMBOL definitions.
No functionality change, just a new module added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
hda_sdw_process_wakeen() is used in hda-loader.c, but defined in
hda.c. This code split will create a circular dependency when hda.c is
moved to a different module. Rather than an invasive code change, this
patch follows the model used for sdw_check_wakeen_irq() with an
abstraction. For now all abstractions point to the same common
routine, which is arguably not great, but this also provides us with a
future-proof way of addressing platform-specific wake processing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CREATE_TRACEPOINTS is supposed to be used once. To avoid modpost
issues when creating modules, let's move the tracepoint creation in a
single object file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To avoid circular dependencies when moving hda.c to a separate module,
we need to move the common code to hda-ipc.c and hda-dsp.c
No functionality change, just code move.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing code relies on the 'HDA_COMMON' module and namespace. We
need to start splitting top-level parts from the low-level ones,
otherwise we will not be able to reuse the low-level parts DMA support
for SoundWire/BPT.
In the end the dependencies will be:
+----------------------------------------------+
| |
| v
sof-pci-intel-xxx --> sof-intel-hda ------------> sof-hda-common
| ^
| |
+-> soundwire_intel --> sof_hda_sdw_bpt
This patch adds the initial split between the sof-pci-intel-xxx
modules and the common parts, in a follow-up patch we will further
split the HDA_COMMON parts
Since the PCI modules are not all independent, i.e. the CNL parts are
also used in JSL and TGL, additional Kconfig and namespace modules
were added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To avoid circular dependencies between SOF/Intel and SoundWire/Intel,
we need to split the top-level hda.c from the rest of the code. This
patch first regroups all SoundWire related code in hda.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Export this helper so that we can report the DPIB position if the BPT
DMA do not complete - this is very useful to see if the DMA started or
gets stuck somehow with invalid bandwidth configurations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20240503135221.229202-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case of capture and when the DAI copier have single bit depth supported
on it's input side we should use this format instead of the one in
fe_params.
Regardless of the stream direction for the NHLT blob lookup when the DAI
copier only supports single bit depth on the DAI side we should only look
for a blob which matches with this single configuration.
For DMIC if the DAI copier supports multiple bit depths, try to request
32-bit blob first if the requested bit depth is 16-bit.
If the 32-bit blob is available then look for marching (32-bit) copier
format to make sure that both the blob and copier have correct parameters.
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240503133253.108201-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
