summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-30mei: me: disable driver on SPT SPS firmwareTomas Winkler
Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Cc: <stable@vger.kernel.org> #4.6+ Tested-by: Sujith Pandel <sujith_pandel@dell.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: musb: Fix locking errors for host only modeTony Lindgren
If we have USB gadgets disabled and USB_MUSB_HOST set, we get errors "possible irq lock inverssion dependency detected" errors during boot. Let's fix the issue by adding start_musb flag and start the controller after we're out of the spinlock protected section. Reported-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30Merge tag 'kvm-s390-master-4.8-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fix for fpu register errors since 4.7 This fixes a regression that was introduced by a semantic change in commit 3f6813b9a5e0 ("s390/fpu: allocate 'struct fpu' with the task_struct"). Symptoms are broken host userspace fpu registers if the old FPU set/get ioctls are used.
2016-08-30Merge tag 'phy-for-4.8-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.8 -rc *) Fix to get host-only mode working in sun4i *) Fix a compilation error because of missing header file *) Other minor fixes Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-08-30Merge tag 'usb-ci-v4.8-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Fix one bug that host can't work after insmod gadget module at dual-role mode, the root cause of this issue is the usbcmd.rs is cleared by chipidea udc code.
2016-08-30ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sxAnson Huang
i.MX6SX has bypass PMIC ready function, as this function is normally NOT enabled on the board design, so we need to bypass the PMIC ready pin check during DSM mode resume flow, otherwise, the internal DSM resume logic will be waiting for this signal to be ready forever and cause resume fail. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Fixes: ff843d621bfc ("ARM: imx: add suspend support for i.mx6sx") Cc: <stable@vger.kernel.org> Tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-30netfilter: nf_tables_netdev: remove redundant ip_hdr assignmentLiping Zhang
We have already use skb_header_pointer to get the ip header pointer, so there's no need to use ip_hdr again. Moreover, in NETDEV INGRESS hook, ip header maybe not linear, so use ip_hdr is not appropriate, remove it. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-30ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callbackJavier Martinez Canillas
The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") the OF core flags interrupt controllers registered with the IRQCHIP_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string as the interrupt controller will not be registered. This prevents the PMU platform device to be registered so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by clearing the OF_POPULATED flag in the PMU IRQ init callback, to allow the Exynos PMU platform driver to be probed. The patch is based on Philipp Zabel's "ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver". Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-08-30ALSA: hda - Enable subwoofer on Dell Inspiron 7559Kai-Heng Feng
The subwoofer on Inspiron 7559 was disabled originally. Applying a pin fixup to node 0x1b can enable it and make it work. Old pin: 0x411111f0 New pin: 0x90170151 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-30drm/imx: fix crtc vblank state regressionLucas Stach
The atomic conversion lost the notification to let the DRM core know about the current state of the CRTC vblank interrupts. This regressed the ability of the core to reject page flip attempts on currently disabled CRTCs. Add back the notifications. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30cfg80211: Add stub for cfg80211_get_station()Linus Lüssing
This allows modules using this function (currently: batman-adv) to compile even if cfg80211 is not built at all, thus relaxing dependencies. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-30mac80211: TDLS: don't require beaconing for AP BWArik Nemtsov
Stop downgrading TDLS chandef when reaching the AP BW. The AP provides the necessary regulatory protection in this case. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=153961, which reported an infinite loop here. Reported-by: Kamil Toman <kamil.toman@gmail.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-30ALSA: hda - Add headset mic quirk for Dell Inspiron 5468Shrirang Bagul
This patch enables headset microphone on some variants of Dell Inspiron 5468. (Dell SSID 0x07ad) BugLink: https://bugs.launchpad.net/bugs/1617900 Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-30xfs: track log done items directly in the deferred pending work itemDarrick J. Wong
Christoph reports slab corruption when a deferred refcount update aborts during _defer_finish(). The cause of this was broken log item state tracking in xfs_defer_pending -- upon an abort, _defer_trans_abort() will call abort_intent on all intent items, including the ones that have already had a done item attached. This is incorrect because each intent item has 2 refcount: the first is released when the intent item is committed to the log; and the second is released when the _done_ item is committed to the log, or by the intent creator if there is no done item. In other words, once we log the done item, responsibility for releasing the intent item's second refcount is transferred to the done item and /must not/ be performed by anything else. The dfp_committed flag should have been tracking whether or not we had a done item so that _defer_trans_abort could decide if it needs to abort the intent item, but due to a thinko this was not the case. Rip it out and track the done item directly so that we do the right thing w.r.t. intent item freeing. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reported-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-29Merge tag 'hwmon-for-linus-v4.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Add missing sysfs attribute group terminator to it87 driver" * tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (it87) Add missing sysfs attribute group terminator
2016-08-29Merge tag 'v4.8-rockchip-clk-fixes1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Some fixes for rk3399 register errors that revealed themself during actual use. * tag 'v4.8-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399 clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399 clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399 clk: rockchip: fix rk3399 aclk_vio gate bit
2016-08-29Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix bugs that could cause kernel deadlocks or file system corruption while moving xattrs to expand the extended inode. Also add some sanity checks to the block group descriptors to make sure we don't end up overwriting the superblock" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid deadlock when expanding inode size ext4: properly align shifted xattrs when expanding inodes ext4: fix xattr shifting when expanding inodes part 2 ext4: fix xattr shifting when expanding inodes ext4: validate that metadata blocks do not overlap superblock ext4: reserve xattr index for the Hurd
2016-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Segregate namespaces properly in conntrack dumps, from Liping Zhang. 2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet. 3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz. 4) Fix use-after-free in tcp_xmit_retransmit_queue(). 5) Userspace header fixups (use of __u32, missing includes, etc.) from Mikko Rapeli. 6) Further refinements to fragmentation wrt gso and tunnels, from Shmulik Ladkani. 7) Trigger poll correctly for zero length UDP packets, from Eric Dumazet. 8) TCP window scaling fix, also from Eric Dumazet. 9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets. 10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet. 11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng. 12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet. 13) Add new device ID to alx driver, from Owen Lin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) Add Killer E2500 device ID in alx driver. net: smc91x: fix SMC accesses Documentation: networking: dsa: Remove platform device TODO net/mlx5: Increase number of ethtool steering priorities net/mlx5: Add error prints when validate ETS failed net/mlx5e: Fix memory leak if refreshing TIRs fails net/mlx5e: Add ethtool counter for TX xmit_more net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ net/mlx5e: Don't wait for SQ completions on close net/mlx5e: Don't post fragmented MPWQE when RQ is disabled net/mlx5e: Don't wait for RQ completions on close net/mlx5e: Limit UMR length to the device's limitation rhashtable: fix a memory leak in alloc_bucket_locks() sfc: fix potential stack corruption from running past stat bitmask team: loadbalance: push lacpdus to exact delivery net: hns: dereference ppe_cb->ppe_common_cb if it is non-null 8139cp: Fix one possible deadloop in cp_rx_poll i40e: Change some init flow for the client Revert "phy: IRQ cannot be shared" net: dsa: bcm_sf2: Fix race condition while unmasking interrupts ...
2016-08-29iwlwifi: mvm: Advertise support for AP channel width changePeer, Ilan
The iwlmvm driver supports channel width change in AP mode. Add the proper flag. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-29iwlwifi: mvm: don't use ret when not initialisedEmmanuel Grumbach
fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 6a95126763fb ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-29iwlwifi: mvm: check if vif is NULL before using itSharon Dvir
wdev_to_ieee80211_vif() might return NULL. Check that vif != NULL before dereferencing it. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-29iwlwifi: mvm: consider P2p device type for firmware dump triggersEmmanuel Grumbach
When the user really wanted a dump on P2P Client, he coudln't get it because we checked vif->type but didn't take vif->p2p into account. Fix that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-08-29pNFS/flexfiles: Fix an Oopsable condition when connection to the DS failsTrond Myklebust
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or ff_layout_pg_init_write, then we currently end up clearing the layout segment carried by the struct nfs_pageio_descriptor, causing an Oops when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist. The fix is to ensure we return the layout and then retry. Fixes: 446ca2195303 ("pNFS/flexfiles: When initing reads or writes, we...") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-08-29Merge tag 'platform-drivers-x86-v4.8-4' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Remove module related code from two drivers that are only configurable as built-in: intel_pmic_gpio and platform/olpc" * tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmic_gpio: Make explicitly non-modular platform/olpc: Make ec explicitly non-modular
2016-08-29Merge tag 'powerpc-4.8-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Ben Herrenschmidt: "This was meant to be sent early last week, but I has a change pending on one of the fixes and other things made me forget all about. Ugh. We have some misc fixes for powerpc 4.8. Some trivial bits and some regressions, and a trivial cleanup or two that I saw no point in letting rot in patchwork" * tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: signals: Discard transaction state from signal frames powerpc/powernv : Drop reference added by kset_find_obj() powerpc/tm: do not use r13 for tabort_syscall powerpc: move hmi.c to arch/powerpc/kvm/ powerpc: sysdev: cpm: fix gpio save_regs functions powerpc/pseries: PACA save area fix for MCE vs MCE powerpc/pseries: PACA save area fix for general exception vs MCE powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support powerpc, hotplug: Avoid to touch non-existent cpumasks. powerpc: migrate exception table users off module.h and onto extable.h powerpc/powernv/pci: fix iterator signedness powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb) cxl: use pcibios_free_controller_deferred() when removing vPHBs powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner" powerpc/512x: Delete unnecessary assignment for the field "owner" drivers/macintosh: Delete owner assignment powerpc: cputhreads: Add missing include file
2016-08-29Merge ath-current from ath.gitKalle Valo
ath.git fixes for 4.8. Major changes: ath9k * fix regression in client mode beacon configuration * fix a station pointer which resulted in spurious crashes
2016-08-29tools:iio:iio_generic_buffer: fix trigger-less modeGregor Boirie
Passing the trigger-less mode option on the command line causes iio_generic_buffer to fail searching for an IIO trigger. Fix this by skipping trigger initialization if trigger-less mode is requested. Technically it actually fixes: 7c7e9dad70 where the bug was introduced but as the window to the patch below that changes the context was very small let's mark it with that. Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Fixes: deb4d1fdcb5af ("iio: generic_buffer: Fix --trigger-num option") Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-29ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114Ken Lin
Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-29Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into ↵Jens Axboe
for-linus Sagi writes: Mostly stability fixes and cleanups: - NQN endianess fix from Daniel - possible use-after-free fix from Vincent - nvme-rdma connect semantics fixes from Jay - Remove redundant variables in rdma driver - Kbuild fix from Christoph - nvmf_host referencing fix from Christoph - uninit variable fix from Colin
2016-08-29drm/imx: Add active plane reconfiguration supportLiu Ying
We don't support configuring active plane on-the-fly for imx-drm. The relevant CRTC should be disabled before the plane configuration. Of course, the plane itself should be disabled as well. This patch adds active plane reconfiguration support by forcing CRTC mode change and disabling-enabling plane in plane's ->atomic_update callback. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <linux@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Liu Ying <gnuiyl@gmail.com> Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-29ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property nameVladimir Zapolskiy
Fix misspelled "ti,x-plate-ohms" property name of TI TSC2046 touchscreen controller. Fixes: d09e6beafa23 ("ARM: dts: imx7d-sdb: Add support for touchscreen") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29fix:mailbox:bcm-pdc-mailbox:mark symbols static where possibleBaoyou Xie
We get 2 warnings when biuld kernel with W=1: drivers/mailbox/bcm-pdc-mailbox.c:472:6: warning: no previous prototype for 'pdc_setup_debugfs' [-Wmissing-prototypes] drivers/mailbox/bcm-pdc-mailbox.c:488:6: warning: no previous prototype for 'pdc_free_debugfs' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown()Dan Carpenter
We can't pass NULL pointers to pdc_ring_free() so I moved the check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOXRob Rice
Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX to avoid link error on some platforms. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Rob Rice <rrice@broadcom.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-08-29hwmon: (it87) Add missing sysfs attribute group terminatorJean Delvare
Attribute array it87_attributes_in lacks its NULL terminator, causing random behavior when operating on the attribute group. Fixes: 52929715634a ("hwmon: (it87) Use is_visible for voltage sensors") Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-08-29drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()Chris Wilson
If we hit the error path, we have never called drm_encoder_init() and so have nothing to cleanup. Doing so hits a null dereference: [ 10.066261] BUG: unable to handle kernel NULL pointer dereference at 00000104 [ 10.066273] IP: [<c16054b4>] mutex_lock+0xa/0x15 [ 10.066287] *pde = 00000000 [ 10.066295] Oops: 0002 [#1] [ 10.066302] Modules linked in: i915(+) video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm iTCO_wdt iTCO_vendor_support ppdev evdev snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm snd_timer snd pcspkr uhci_hcd ehci_pci soundcore sr_mod ehci_hcd serio_raw i2c_i801 usbcore i2c_smbus cdrom lpc_ich mfd_core rng_core e100 mii floppy parport_pc parport acpi_cpufreq button processor usb_common eeprom lm85 hwmon_vid autofs4 [ 10.066378] CPU: 0 PID: 132 Comm: systemd-udevd Not tainted 4.8.0-rc3-00013-gef0e1ea #34 [ 10.066389] Hardware name: MicroLink /D865GLC , BIOS BF86510A.86A.0077.P25.0508040031 08/04/2005 [ 10.066401] task: f62db800 task.stack: f5970000 [ 10.066409] EIP: 0060:[<c16054b4>] EFLAGS: 00010286 CPU: 0 [ 10.066417] EIP is at mutex_lock+0xa/0x15 [ 10.066424] EAX: 00000104 EBX: 00000104 ECX: 00000000 EDX: 80000000 [ 10.066432] ESI: 00000000 EDI: 00000104 EBP: f5be8000 ESP: f5971b58 [ 10.066439] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 10.066446] CR0: 80050033 CR2: 00000104 CR3: 35945000 CR4: 000006d0 [ 10.066453] Stack: [ 10.066459] f503d740 f824dddf 00000000 f61170c0 f61170c0 f82371ae f850f40e 00000001 [ 10.066476] f61170c0 f5971bcc f5be8000 f9c2d401 00000001 f8236fcc 00000001 00000000 [ 10.066491] f5144014 f5be8104 00000008 f9c5267c 00000007 f61170c0 f5144400 f9c4ff00 [ 10.066507] Call Trace: [ 10.066526] [<f824dddf>] ? drm_modeset_lock_all+0x27/0xb3 [drm] [ 10.066545] [<f82371ae>] ? drm_encoder_cleanup+0x1a/0x132 [drm] [ 10.066559] [<f850f40e>] ? drm_atomic_helper_connector_reset+0x3f/0x5c [drm_kms_helper] [ 10.066644] [<f9c2d401>] ? intel_dvo_init+0x569/0x788 [i915] [ 10.066663] [<f8236fcc>] ? drm_encoder_init+0x43/0x20b [drm] [ 10.066734] [<f9bf1fce>] ? intel_modeset_init+0x1436/0x17dd [i915] [ 10.066791] [<f9b37636>] ? i915_driver_load+0x85a/0x15d3 [i915] [ 10.066846] [<f9b3603d>] ? i915_driver_open+0x5/0x5 [i915] [ 10.066857] [<c14af4d0>] ? firmware_map_add_entry.part.2+0xc/0xc [ 10.066868] [<c1343daf>] ? pci_device_probe+0x8e/0x11c [ 10.066878] [<c140cec8>] ? driver_probe_device+0x1db/0x62e [ 10.066888] [<c120c010>] ? kernfs_new_node+0x29/0x9c [ 10.066897] [<c13438e0>] ? pci_match_device+0xd9/0x161 [ 10.066905] [<c120c48b>] ? kernfs_create_dir_ns+0x42/0x88 [ 10.066914] [<c140d401>] ? __driver_attach+0xe6/0x11b [ 10.066924] [<c1303b13>] ? kobject_add_internal+0x1bb/0x44f [ 10.066933] [<c140d31b>] ? driver_probe_device+0x62e/0x62e [ 10.066941] [<c140a2d2>] ? bus_for_each_dev+0x46/0x7f [ 10.066950] [<c140c502>] ? driver_attach+0x1a/0x34 [ 10.066958] [<c140d31b>] ? driver_probe_device+0x62e/0x62e [ 10.066966] [<c140b758>] ? bus_add_driver+0x217/0x32a [ 10.066975] [<f8403000>] ? 0xf8403000 [ 10.066982] [<c140de27>] ? driver_register+0x5f/0x108 [ 10.066991] [<c1000493>] ? do_one_initcall+0x49/0x1f6 [ 10.067000] [<c1082299>] ? pick_next_task_fair+0x14b/0x2a3 [ 10.067008] [<c1603c8d>] ? __schedule+0x15c/0x4fe [ 10.067016] [<c1604104>] ? preempt_schedule_common+0x19/0x3c [ 10.067027] [<c11051de>] ? do_init_module+0x17/0x230 [ 10.067035] [<c1604139>] ? _cond_resched+0x12/0x1a [ 10.067044] [<c116f9aa>] ? kmem_cache_alloc+0x8f/0x11f [ 10.067052] [<c11051de>] ? do_init_module+0x17/0x230 [ 10.067060] [<c11703dd>] ? kfree+0x137/0x203 [ 10.067068] [<c110523d>] ? do_init_module+0x76/0x230 [ 10.067078] [<c10cadf3>] ? load_module+0x2a39/0x333f [ 10.067087] [<c10cb8b2>] ? SyS_finit_module+0x96/0xd5 [ 10.067096] [<c1132231>] ? vm_mmap_pgoff+0x79/0xa0 [ 10.067105] [<c1001e96>] ? do_fast_syscall_32+0xb5/0x1b0 [ 10.067114] [<c16086a6>] ? sysenter_past_esp+0x47/0x75 [ 10.067121] Code: c8 f7 76 c1 e8 8e cc d2 ff e9 45 fe ff ff 66 90 66 90 66 90 66 90 90 ff 00 7f 05 e8 4e 0c 00 00 c3 53 89 c3 e8 75 ec ff ff 89 d8 <ff> 08 79 05 e8 fa 0a 00 00 5b c3 53 89 c3 85 c0 74 1b 8b 03 83 [ 10.067180] EIP: [<c16054b4>] mutex_lock+0xa/0x15 SS:ESP 0068:f5971b58 [ 10.067190] CR2: 0000000000000104 [ 10.067222] ---[ end trace 049f1f09da45a856 ]--- Reported-by: Meelis Roos <mroos@linux.ee> Fixes: 580d8ed522e0 ("drm/i915: Give encoders useful names") Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160823092558.14931-1-chris@chris-wilson.co.uk (cherry picked from commit 8f76aa0ebe0b7787afe768d9df80031e832d2520)
2016-08-29clocksource/drivers/atmel-pit: Fix compilation errorDaniel Lezcano
The previous fix introduced a check against the ret variable which is not defined, hence producing a compilation error: linux/drivers/clocksource/timer-atmel-pit.c: In function ‘at91sam926x_pit_dt_init’: linux/drivers/clocksource/timer-atmel-pit.c:264:2: error: ‘ret’ undeclared (first use in this function) ret = clk_prepare_enable(data->mck); ^ linux/drivers/clocksource/timer-atmel-pit.c:264:2: note: each undeclared identifier is reported only once for each function it appears in Add the missing the variable 'ret'. Fixes: 504f34c9e45c "clocksource/drivers/atmel-pit: Convert init function to return error" Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: alexandre.belloni@free-electrons.com Cc: motobud@gmail.com Cc: realbright@lgcns.com Link: http://lkml.kernel.org/r/1472453043-24287-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-29ALSA: timer: fix NULL pointer dereference on memory allocation failureVegard Nossum
I hit this with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff88011278d600 task.stack: ffff8801120c0000 RIP: 0010:[<ffffffff82c8ba07>] [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP: 0018:ffff8801120c7a60 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007 RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048 RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790 R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980 R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286 FS: 00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0 Stack: ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0 ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000 ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0 Call Trace: [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670 [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0 [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46 RIP [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP <ffff8801120c7a60> ---[ end trace 5955b08db7f2b029 ]--- This can happen if snd_hrtimer_open() fails to allocate memory and returns an error, which is currently not checked by snd_timer_open(): ioctl(SNDRV_TIMER_IOCTL_SELECT) - snd_timer_user_tselect() - snd_timer_close() - snd_hrtimer_close() - (struct snd_timer *) t->private_data = NULL - snd_timer_open() - snd_hrtimer_open() - kzalloc() fails; t->private_data is still NULL ioctl(SNDRV_TIMER_IOCTL_START) - snd_timer_user_start() - snd_timer_start() - snd_timer_start1() - snd_hrtimer_start() - t->private_data == NULL // boom Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-29ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUEVegard Nossum
I got this: divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff8801120a9580 task.stack: ffff8801120b0000 RIP: 0010:[<ffffffff82c8bd9a>] [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP: 0018:ffff88011aa87da8 EFLAGS: 00010006 RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001 RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048 R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00 R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000 FS: 00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76 ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0 00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0 Call Trace: <IRQ> [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00 [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130 [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0 [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0 [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0 [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0 [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0 [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0 [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60 [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670 [<ffffffff82c87015>] snd_timer_continue+0x45/0x80 [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0 [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00 RIP [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP <ffff88011aa87da8> ---[ end trace 6aa380f756a21074 ]--- The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a completely new/unused timer -- it will have ->sticks == 0, which causes a divide by 0 in snd_hrtimer_callback(). Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-29clk: sunxi-ng: Fix wrong reset register offsetsJorik Jonker
The reset register offsets for UART*, I2C* and SCR were off by a few bytes. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-28intel_pmic_gpio: Make explicitly non-modularPaul Gortmaker
The Kconfig entry controlling compilation of this code is: drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Cc: Alek Du <alek.du@intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-28platform/olpc: Make ec explicitly non-modularPaul Gortmaker
The Kconfig entry controlling compilation of this code is: arch/x86/Kconfig:config OLPC arch/x86/Kconfig: bool "One Laptop Per Child support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-08-29Add Killer E2500 device ID in alx driver.Owen Lin
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28net: smc91x: fix SMC accessesRussell King
Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28Documentation: networking: dsa: Remove platform device TODOFlorian Fainelli
Since commit 83c0afaec7b7 ("net: dsa: Add new binding implementation"), the shortcomings of the dsa platform device have been addressed, remove that TODO item. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28Merge branch 'mlx5-series'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 2016-08-29 This series contains some bug fixes for the mlx5 core and mlx5 ethernet driver. From Saeed, Fix UMR to consider hardware translation table field size limitation when calculating the maximum number of MTTs required by the driver. Three patches to speed-up netdevice close time by serializing channel (SQs & RQs) destruction rather than issuing and waiting for hardware interrupts to free them. From Eran, Fix ethtool ring parameter reporting for striding RQ layout. Add error prints on ETS validation failure. From Kamal, Fix memory leak on error flow. From Maor, Fix ethtool steering priorities number. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28net/mlx5: Increase number of ethtool steering prioritiesMaor Gottlieb
Ethtool has 11 flow tables, each flow table has its own priority. Increase the number of priorities to be aligned with the number of flow tables. Fixes: 1174fce8d141 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28net/mlx5: Add error prints when validate ETS failedEran Ben Elisha
Upon set ETS failure due to user invalid input, add error prints to specify the exact error to the user. Fixes: cdcf11212b22 ('net/mlx5e: Validate BW weight values of ETS') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28net/mlx5e: Fix memory leak if refreshing TIRs failsKamal Heib
Free 'in' command object also when mlx5_core_modify_tir fails. Fixes: 724b2aa15126 ("net/mlx5e: TIRs management refactoring") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-28net/mlx5e: Add ethtool counter for TX xmit_moreTariq Toukan
Add a counter in ethtool for the number of times that TX xmit_more was used. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 12:53:02 +0000