summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-24KVM: selftests: Add back the missing check of MONITOR/MWAIT availabilityChenyi Qiang
The revamp of monitor/mwait test missed the original check of feature availability [*]. If MONITOR/MWAIT is not supported or is disabled by IA32_MISC_ENABLE on the host, executing MONITOR or MWAIT instruction from guest doesn't cause monitor/mwait VM exits, but a #UD. [*] https://lore.kernel.org/all/20240411210237.34646-1-zide.chen@intel.com/ Reported-by: Xuelian Guo <xuelian.guo@intel.com> Fixes: 80fd663590cf ("selftests: kvm: revamp MONITOR/MWAIT tests") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Link: https://lore.kernel.org/r/20250620062219.342930-1-chenyi.qiang@intel.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-06-24bcachefs: Check for bad write buffer key when moving from journalKent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blockedAlan Huang
Reported-by: syzbot+d540192e763531d307ff@syzkaller.appspotmail.com Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-06-24KVM: Allow CPU to reschedule while setting per-page memory attributesLiam Merwick
When running an SEV-SNP guest with a sufficiently large amount of memory (1TB+), the host can experience CPU soft lockups when running an operation in kvm_vm_set_mem_attributes() to set memory attributes on the whole range of guest memory. watchdog: BUG: soft lockup - CPU#8 stuck for 26s! [qemu-kvm:6372] CPU: 8 UID: 0 PID: 6372 Comm: qemu-kvm Kdump: loaded Not tainted 6.15.0-rc7.20250520.el9uek.rc1.x86_64 #1 PREEMPT(voluntary) Hardware name: Oracle Corporation ORACLE SERVER E4-2c/Asm,MB Tray,2U,E4-2c, BIOS 78016600 11/13/2024 RIP: 0010:xas_create+0x78/0x1f0 Code: 00 00 00 41 80 fc 01 0f 84 82 00 00 00 ba 06 00 00 00 bd 06 00 00 00 49 8b 45 08 4d 8d 65 08 41 39 d6 73 20 83 ed 06 48 85 c0 <74> 67 48 89 c2 83 e2 03 48 83 fa 02 75 0c 48 3d 00 10 00 00 0f 87 RSP: 0018:ffffad890a34b940 EFLAGS: 00000286 RAX: ffff96f30b261daa RBX: ffffad890a34b9c8 RCX: 0000000000000000 RDX: 000000000000001e RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffad890a356868 R13: ffffad890a356860 R14: 0000000000000000 R15: ffffad890a356868 FS: 00007f5578a2a400(0000) GS:ffff97ed317e1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f015c70fb18 CR3: 00000001109fd006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> xas_store+0x58/0x630 __xa_store+0xa5/0x130 xa_store+0x2c/0x50 kvm_vm_set_mem_attributes+0x343/0x710 [kvm] kvm_vm_ioctl+0x796/0xab0 [kvm] __x64_sys_ioctl+0xa3/0xd0 do_syscall_64+0x8c/0x7a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f5578d031bb Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2d 4c 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe0a742b88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000004020aed2 RCX: 00007f5578d031bb RDX: 00007ffe0a742c80 RSI: 000000004020aed2 RDI: 000000000000000b RBP: 0000010000000000 R08: 0000010000000000 R09: 0000017680000000 R10: 0000000000000080 R11: 0000000000000246 R12: 00005575e5f95120 R13: 00007ffe0a742c80 R14: 0000000000000008 R15: 00005575e5f961e0 While looping through the range of memory setting the attributes, call cond_resched() to give the scheduler a chance to run a higher priority task on the runqueue if necessary and avoid staying in kernel mode long enough to trigger the lockup. Fixes: 5a475554db1e ("KVM: Introduce per-page memory attributes") Cc: stable@vger.kernel.org # 6.12.x Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Link: https://lore.kernel.org/r/20250609091121.2497429-2-liam.merwick@oracle.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-06-24KVM: x86/xen: Allow 'out of range' event channel ports in IRQ routing table.David Woodhouse
To avoid imposing an ordering constraint on userspace, allow 'invalid' event channel targets to be configured in the IRQ routing table. This is the same as accepting interrupts targeted at vCPUs which don't exist yet, which is already the case for both Xen event channels *and* for MSIs (which don't do any filtering of permitted APIC ID targets at all). If userspace actually *triggers* an IRQ with an invalid target, that will fail cleanly, as kvm_xen_set_evtchn_fast() also does the same range check. If KVM enforced that the IRQ target must be valid at the time it is *configured*, that would force userspace to create all vCPUs and do various other parts of setup (in this case, setting the Xen long_mode) before restoring the IRQ table. Cc: stable@vger.kernel.org Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/e489252745ac4b53f1f7f50570b03fb416aa2065.camel@infradead.org [sean: massage comment] Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-06-24KVM: x86/hyper-v: Use preallocated per-vCPU buffer for de-sparsified vCPU masksSean Christopherson
Use a preallocated per-vCPU bitmap for tracking the unpacked set of vCPUs being targeted for Hyper-V's paravirt TLB flushing. If KVM_MAX_NR_VCPUS is set to 4096 (which is allowed even for MAXSMP=n builds), putting the vCPU mask on-stack pushes kvm_hv_flush_tlb() past the default FRAME_WARN limit. arch/x86/kvm/hyperv.c:2001:12: error: stack frame size (1288) exceeds limit (1024) in 'kvm_hv_flush_tlb' [-Werror,-Wframe-larger-than] 2001 | static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc) | ^ 1 error generated. Note, sparse_banks was given the same treatment by commit 7d5e88d301f8 ("KVM: x86: hyper-v: Use preallocated buffer in 'struct kvm_vcpu_hv' instead of on-stack 'sparse_banks'"), for the exact same reason. Reported-by: Abinash Lalotra <abinashsinghlalotra@gmail.com> Closes: https://lore.kernel.org/all/20250613111023.786265-1-abinashsinghlalotra@gmail.com Link: https://lore.kernel.org/all/aEylI-O8kFnFHrOH@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-06-24KVM: SVM: Initialize vmsa_pa in VMCB to INVALID_PAGE if VMSA page is NULLSean Christopherson
When creating an SEV-ES vCPU for intra-host migration, set its vmsa_pa to INVALID_PAGE to harden against doing VMRUN with a bogus VMSA (KVM checks for a valid VMSA page in pre_sev_run()). Cc: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Link: https://lore.kernel.org/r/20250602224459.41505-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-06-24KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flightSean Christopherson
Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing PFN 0 is "fine"-ish now that it's sequestered away thanks to L1TF, but panicking in this scenario is preferable to potentially running with corrupted state. Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Fixes: 0b020f5af092 ("KVM: SEV: Add support for SEV-ES intra host migration") Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Cc: stable@vger.kernel.org Cc: James Houghton <jthoughton@google.com> Cc: Peter Gonda <pgonda@google.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Tested-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: James Houghton <jthoughton@google.com> Link: https://lore.kernel.org/r/20250602224459.41505-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-06-24iommufd/selftest: Fix build warnings due to uninitialized mfdNicolin Chen
Commit 869c788909b9 ("selftests: harness: Stop using setjmp()/longjmp()") changed the harness structure. For some unknown reason, two build warnings occur to the iommufd selftest: iommufd.c: In function ‘wrapper_iommufd_mock_domain_all_aligns’: iommufd.c:1807:17: warning: ‘mfd’ may be used uninitialized in this function 1807 | close(mfd); | ^~~~~~~~~~ iommufd.c:1767:13: note: ‘mfd’ was declared here 1767 | int mfd; | ^~~ iommufd.c: In function ‘wrapper_iommufd_mock_domain_all_aligns_copy’: iommufd.c:1870:17: warning: ‘mfd’ may be used uninitialized in this function 1870 | close(mfd); | ^~~~~~~~~~ iommufd.c:1819:13: note: ‘mfd’ was declared here 1819 | int mfd; | ^~~ All the mfd have been used in the variant->file path only, so it's likely a false alarm. FWIW, the commit mentioned above does not cause this, yet it might affect gcc in a certain way that resulted in the warnings. It is also found that ading a dummy setjmp (which doesn't make sense) could mute the warnings: https://lore.kernel.org/all/aEi8DV+ReF3v3Rlf@nvidia.com/ The job of this selftest is to catch kernel bug, while such warnings will unlikely disrupt its role. Mute the warning by force initializing the mfd and add an ASSERT_GT(). Link: https://patch.msgid.link/r/6951d85d5cd34cbf22abab7714542654e63ecc44.1750787928.git.nicolinc@nvidia.com Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Add asserts testing global mfdNicolin Chen
The mfd and mfd_buffer will be used in the tests directly without an extra check. Test them in setup_sizes() to ensure they are safe to use. Fixes: 0bcceb1f51c7 ("iommufd: Selftest coverage for IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/94bdc11d2b6d5db337b1361c5e5fce0ed494bb40.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Add missing close(mfd) in memfd_mmap()Nicolin Chen
Do not forget to close mfd in the error paths, since none of the callers would close it when ASSERT_NE(MAP_FAILED, buf) fails. Fixes: 0bcceb1f51c7 ("iommufd: Selftest coverage for IOMMU_IOAS_MAP_FILE") Link: https://patch.msgid.link/r/a363a69dbf453d4bc1bde276f3b16778620488e1.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizesNicolin Chen
The hugepage test cases of iommufd_dirty_tracking have the 64MB and 128MB coverages. Both of them are smaller than the default hugepage size 512MB, when CONFIG_PAGE_SIZE_64KB=y. However, these test cases have a variant of using huge pages, which would mmap(MAP_HUGETLB) using these smaller sizes than the system hugepag size. This results in the kernel aligning up the smaller size to 512MB. If a memory was located between the upper 64/128MB size boundary and the hugepage 512MB boundary, it would get wiped out: https://lore.kernel.org/all/aEoUhPYIAizTLADq@nvidia.com/ Given that this aligning up behavior is well documented, we have no choice but to allocate a hugepage aligned size to avoid this unintended wipe out. Instead of relying on the kernel's internal force alignment, pass the same size to posix_memalign() and map(). Also, fix the FIXTURE_TEARDOWN() misusing munmap() to free the memory from posix_memalign(), as munmap() doesn't destroy the allocator meta data. So, call free() instead. Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Link: https://patch.msgid.link/r/1ea8609ae6d523fdd4d8efb179ddee79c8582cb6.1750787928.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-06-24drm/xe/hwmon: Fix xe_hwmon_power_max_writeKarthik Poosa
Prevent other bits of mailbox power limit from being overwritten with 0. This issue was due to a missing read and modify of current power limit, before setting a requested mailbox power limit, which is added in this patch. v2: - Improve commit message. (Anshuman) v3: - Rebase. - Rephrase commit message. (Riana) - Add read-modify-write variant of xe_hwmon_pcode_write_power_limit() i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal) - Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits. - Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits writes use xe_hwmon_pcode_rmw_power_limit() only. v4: - Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever applicable. (Riana) Fixes: 25a2aa779fc3 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 8aa7306631f088881759398972d503757cf0c901) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-24drm/xe/display: Add check for alloc_ordered_workqueue()Haoxiang Li
Add check for the return value of alloc_ordered_workqueue() in xe_display_create() to catch potential exception. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 5b62d63395d5b7d4094e7cd380bccae4b25415cb) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-24spi: spi-cadence-quadspi: Fix pm runtime unbalanceKhairul Anuar Romli
Having PM put sync in remove function is causing PM underflow during remove operation. This is caused by the function, runtime_pm_get_sync, not being called anywhere during the op. Ensure that calls to pm_runtime_enable()/pm_runtime_disable() and pm_runtime_get_sync()/pm_runtime_put_sync() match. echo 108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind [ 49.644256] Deleting MTD partitions on "108d2000.spi.0": [ 49.649575] Deleting u-boot MTD partition [ 49.684087] Deleting root MTD partition [ 49.724188] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error. Subsequent unbind attempts will return a "No such device" error, while bind attempts will return a "Resource temporarily unavailable" error. [ 47.592434] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 49.592233] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128) [ 53.232309] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 55.828550] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128) [ 57.940627] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 59.912490] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128) [ 61.876243] cadence-qspi 108d2000.spi: Runtime PM usage count underflow! [ 61.883000] platform 108d2000.spi: Unbalanced pm_runtime_enable! [ 532.012270] cadence-qspi 108d2000.spi: probe with driver cadence-qspi failed1 Also, change clk_disable_unprepare() to clk_disable() since continuous bind and unbind operations will trigger a warning indicating that the clock is already unprepared. Fixes: 4892b374c9b7 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support") cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-24ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak.Tamura Dai
sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30 Signed-off-by: Tamura Dai <kirinode0@gmail.com> Link: https://patch.msgid.link/20250615235548.8591-1-kirinode0@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-24usb: typec: displayport: Fix potential deadlockAndrei Kuchynski
The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context. Cc: stable <stable@kernel.org> Fixes: b4b38ffb38c9 ("usb: typec: displayport: Receive DP Status Update NAK request exit dp altmode") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250624133246.3936737-1-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24usb: typec: altmodes/displayport: do not index invalid pin_assignmentsRD Babiera
A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable <stable@kernel.org> Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250618224943.3263103-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24usb: cdnsp: Fix issue with CV Bad Descriptor testPawel Laszczak
The SSP2 controller has extra endpoint state preserve bit (ESP) which setting causes that endpoint state will be preserved during Halt Endpoint command. It is used only for EP0. Without this bit the Command Verifier "TD 9.10 Bad Descriptor Test" failed. Setting this bit doesn't have any impact for SSP controller. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/PH7PR07MB95382CCD50549DABAEFD6156DD7CA@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attachRD Babiera
This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS. tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer. Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail. Turn VBUS on before tcpm_set_roles to meet timing requirement. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable <stable@kernel.org> Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250618230606.3272497-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24drm/amd/display: Add sanity checks for drm_edid_raw()Takashi Iwai
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to return proper EDID bytes the caller wants: it may be either NULL (that leads to an Oops) or with too long bytes over the fixed size raw_edid array (that may lead to memory corruption). The latter was reported actually when connected with a bad adapter. Add sanity checks for drm_edid_raw() to address the above corner cases, and return EDID_BAD_INPUT accordingly. Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid") Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 648d3f4d209725d51900d6a3ed46b7b600140cdf) Cc: stable@vger.kernel.org
2025-06-24drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL valueMario Limonciello
[Why] commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") adjusted the brightness range to scale to larger values, but missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that scaling works properly with custom brightness curves. [How] As the change for max brightness of 0xFFFF only applies to devices supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL. Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5b852044eb0d3e1f1c946d32e05fcb068e0a20a0) Cc: stable@vger.kernel.org
2025-06-24drm/amdgpu/sdma7: add ucode version checks for userq supportAlex Deucher
SDMA 7.0.0/1: 7836028 Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8c011408ed842dfccdd50a90a9cf6bccdb85cc0e)
2025-06-24drm/amdgpu/sdma6: add ucode version checks for userq supportAlex Deucher
SDMA 6.0.0 version 24 SDMA 6.0.2 version 21 SDMA 6.0.3 version 25 Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e8cca30d8b34f1c4101c237914c53068d4a55e73)
2025-06-24drm/amd: Adjust output for discovery error handlingMario Limonciello
commit 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available") added support for reading an amdgpu IP discovery bin file for some specific products. If it's not found then it will fallback to hardcoded values. However if it's not found there is also a lot of noise about missing files and errors. Adjust the error handling to decrease most messages to DEBUG and to show users less about missing files. Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312 Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com> Fixes: 017fbb6690c2 ("drm/amdgpu/discovery: check ip_discovery fw file available") Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 49f1f9f6c3c9febf8ba93f94a8d9c8d03e1ea0a1)
2025-06-24drm/amdgpu/mes: add compatibility checks for set_hw_resource_1Alex Deucher
Seems some older MES firmware versions do not properly support this packet. Add back some the compatibility checks. v2: switch to fw version check (Shaoyun) Fixes: f81cd793119e ("drm/amd/amdgpu: Fix MES init sequence") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4295 Cc: Shaoyun Liu <shaoyun.liu@amd.com> Reviewed-by: shaoyun.liu <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0180e0a5dd5c6ff118043ee42dbbbddaf881f283) Cc: stable@vger.kernel.org
2025-06-24drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUsSrinivasan Shanmugam
Enable the cleaner shader for other GFX9.x series of GPUs to provide data isolation between GPU workloads. The cleaner shader is responsible for clearing the Local Data Store (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which helps prevent data leakage and ensures accurate computation results. This update extends cleaner shader support to GFX9.x GPUs, previously available for GFX9.4.2. It enhances security by clearing GPU memory between processes and maintains a consistent GPU state across KGD and KFD workloads. Cc: Manu Rastogi <manu.rastogi@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 99808926d0ea6234a89e35240a7cb088368de9e1)
2025-06-24dt-bindings: serial: 8250: Make clocks and clock-frequency exclusiveYao Zi
The 8250 binding before converting to json-schema states, - clock-frequency : the input clock frequency for the UART or - clocks phandle to refer to the clk used as per Documentation/devicetree for clock-related properties, where "or" indicates these properties shouldn't exist at the same time. Additionally, the behavior of Linux's driver is strange when both clocks and clock-frequency are specified: it ignores clocks and obtains the frequency from clock-frequency, left the specified clocks unclaimed. It may even be disabled, which is undesired most of the time. But "anyOf" doesn't prevent these two properties from coexisting, as it considers the object valid as long as there's at LEAST one match. Let's switch to "oneOf" and disallows the other property if one exists, precisely matching the original binding and avoiding future confusion on the driver's behavior. Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <stable@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24serial: imx: Restore original RXTL for console to fix data lossFabio Estevam
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency") introduced a regression on the i.MX6UL EVK board. The issue can be reproduced with the following steps: - Open vi on the board. - Paste a text file (~150 characters). - Save the file, then repeat the process. - Compare the sha256sum of the saved files. The checksums do not match due to missing characters or entire lines. Fix this by restoring the RXTL value to 1 when the UART is used as a console. This ensures timely RX interrupts and reliable data reception in console mode. With this change, pasted content is saved correctly, and checksums are always consistent. Cc: stable <stable@kernel.org> Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-24userns and mnt_idmap leak in open_tree_attr(2)Al Viro
Once want_mount_setattr() has returned a positive, it does require finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr() does not change that. As the result, we can end up leaking userns and possibly mnt_idmap as well. Fixes: c4a16820d901 ("fs: add open_tree_attr()") Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-06-24rtc: pcf2127: add missing semicolon after statementHugo Villeneuve
Replace comma with semicolon at the end of the statement when setting config.max_register. Fixes: fd28ceb4603f ("rtc: pcf2127: add variant-specific configuration structure") Cc: stable@vger.kernel.org Cc: Elena Popa <elena.popa@nxp.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250529202923.1552560-1-hugo@hugovil.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-06-24rtc: pcf2127: fix SPI command byte for PCF2131Elena Popa
PCF2131 was not responding to read/write operations using SPI. PCF2131 has a different command byte definition, compared to PCF2127/29. Added the new command byte definition when PCF2131 is detected. Fixes: afc505bf9039 ("rtc: pcf2127: add support for PCF2131 RTC") Cc: stable@vger.kernel.org Signed-off-by: Elena Popa <elena.popa@nxp.com> Acked-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250530104001.957977-1-elena.popa@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-06-24wifi: mac80211: finish link init before RCU publishJohannes Berg
Since the link/conf pointers can be accessed without any protection other than RCU, make sure the data is actually set up before publishing the structures. Fixes: b2e8434f1829 ("wifi: mac80211: set up/tear down client vif links properly") Link: https://patch.msgid.link/20250624130749.9a308b713c74.I4a80f5eead112a38730939ea591d2e275c721256@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24ASoC: rt721-sdca: fix boost gain calculation errorJack Yu
Fix the boost gain calculation error in rt721_sdca_set_gain_get. This patch is specific for "FU33 Boost Volume". Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://patch.msgid.link/1b18fcde41c64d6fa85451d523c0434a@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-06-24Revert "mmc: sdhci: Disable SD card clock before changing parameters"Ulf Hansson
It has turned out the trying to strictly conform to the SDHCI specification is causing problems. Let's revert and start over. This reverts commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc. Cc: Erick Shepherd <erick.shepherd@ni.com> Cc: stable@vger.kernel.org Fixes: fb3bbc46c94f ("mmc: sdhci: Disable SD card clock before changing parameters") Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Reported-by: Jonathan Liu <net147@gmail.com> Reported-by: Salvatore Bonaccorso <carnil@debian.org> Closes: https://bugs.debian.org/1108065 Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250624110932.176925-1-ulf.hansson@linaro.org
2025-06-24Merge tag 'for-net-2025-06-23' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - L2CAP: Fix L2CAP MTU negotiation - hci_core: Fix use-after-free in vhci_flush() - btintel_pcie: Fix potential race condition in firmware download - hci_qca: fix unable to load the BT driver * tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_core: Fix use-after-free in vhci_flush() driver: bluetooth: hci_qca:fix unable to load the BT driver Bluetooth: L2CAP: Fix L2CAP MTU negotiation Bluetooth: btintel_pcie: Fix potential race condition in firmware download ==================== Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-24mmc: sdhci-uhs2: Adjust some error messages and register dump for SD UHS-II cardVictor Shih
Adjust some error messages to debug mode and register dump to dynamic debug mode to avoid causing misunderstanding it is an error. Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250606110121.96314-4-victorshihgli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-24mmc: sdhci: Add a helper function for dump register in dynamic debug modeVictor Shih
Add a helper function for dump register in dynamic debug mode. Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250606110121.96314-3-victorshihgli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-24mmc: core: Adjust some error messages for SD UHS-II cardsVictor Shih
Adjust some error messages to debug mode to avoid causing misunderstanding it is an error. Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 9a9f7e13952b ("mmc: core: Support UHS-II card control and access") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250606110121.96314-2-victorshihgli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-24fuse: fix fuse_fill_write_pages() upper bound calculationJoanne Koong
This fixes a bug in commit 63c69ad3d18a ("fuse: refactor fuse_fill_write_pages()") where max_pages << PAGE_SHIFT is mistakenly used as the calculation for the max_pages upper limit but there's the possibility that copy_folio_from_iter_atomic() may copy over bytes from the iov_iter that are less than the full length of the folio, which would lead to exceeding max_pages. This commit fixes it by adding a 'ap->num_folios < max_folios' check. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Link: https://lore.kernel.org/20250614000114.910380-1-joannelkoong@gmail.com Fixes: 63c69ad3d18a ("fuse: refactor fuse_fill_write_pages()") Tested-by: Brian Foster <bfoster@redhat.com> Reported-by: Brian Foster <bfoster@redhat.com> Closes: https://lore.kernel.org/linux-fsdevel/aEq4haEQScwHIWK6@bfoster/ Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-06-24wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd versionMiri Korenblit
Unfortunately, FWs of some devices don't have the version of the iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0, leading to a warning, and to not sending the command. Fix this by assuming that the default version is 1. Fixes: 83f3ac2848b4 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
2025-06-24ALSA: qc_audio_offload: Fix missing error code in prepare_qmi_response()Harshit Mogalapalli
When snd_soc_usb_find_priv_data() fails, return failure instead of success. While we are at it also use direct returns at first few error paths where there is no additional cleanup needed. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/Z_40qL4JnyjR4j0O@stanley.mountain/ Fixes: 326bbc348298 ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://patch.msgid.link/20250623142639.2938056-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-06-24Merge branch 'af_unix-fix-two-oob-issues'Paolo Abeni
Kuniyuki Iwashima says: ==================== af_unix: Fix two OOB issues. From: Kuniyuki Iwashima <kuniyu@google.com> Recently, two issues are reported regarding MSG_OOB. Patch 1 fixes issues that happen when multiple consumed OOB skbs are placed consecutively in the recv queue. Patch 2 fixes an inconsistent behaviour that close()ing a socket with a consumed OOB skb at the head of the recv queue triggers -ECONNRESET on the peer's recv(). v1: https://lore.kernel.org/netdev/20250618043453.281247-1-kuni1840@gmail.com/ ==================== Link: https://patch.msgid.link/20250619041457.1132791-1-kuni1840@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-24selftest: af_unix: Add tests for -ECONNRESET.Kuniyuki Iwashima
A new function resetpair() calls close() for the receiver and checks the return value from recv() on the initial sender side. Now resetpair() is added to each test case and some additional test cases. Note that TCP sets -ECONNRESET to the consumed OOB, but we have decided not to touch TCP MSG_OOB code in the past. Before: # RUN msg_oob.no_peek.ex_oob_ex_oob ... # msg_oob.c:236:ex_oob_ex_oob:AF_UNIX :Connection reset by peer # msg_oob.c:237:ex_oob_ex_oob:Expected: # msg_oob.c:239:ex_oob_ex_oob:Expected ret[0] (-1) == expected_len (0) # ex_oob_ex_oob: Test terminated by assertion # FAIL msg_oob.no_peek.ex_oob_ex_oob not ok 14 msg_oob.no_peek.ex_oob_ex_oob ... # FAILED: 36 / 48 tests passed. # Totals: pass:36 fail:12 xfail:0 xpass:0 skip:0 error:0 After: # RUN msg_oob.no_peek.ex_oob_ex_oob ... # msg_oob.c:244:ex_oob_ex_oob:AF_UNIX : # msg_oob.c:245:ex_oob_ex_oob:TCP :Connection reset by peer # OK msg_oob.no_peek.ex_oob_ex_oob ok 14 msg_oob.no_peek.ex_oob_ex_oob ... # PASSED: 48 / 48 tests passed. # Totals: pass:48 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250619041457.1132791-5-kuni1840@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-24af_unix: Don't set -ECONNRESET for consumed OOB skb.Kuniyuki Iwashima
Christian Brauner reported that even after MSG_OOB data is consumed, calling close() on the receiver socket causes the peer's recv() to return -ECONNRESET: 1. send() and recv() an OOB data. >>> from socket import * >>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) >>> s1.send(b'x', MSG_OOB) 1 >>> s2.recv(1, MSG_OOB) b'x' 2. close() for s2 sets ECONNRESET to s1->sk_err even though s2 consumed the OOB data >>> s2.close() >>> s1.recv(10, MSG_DONTWAIT) ... ConnectionResetError: [Errno 104] Connection reset by peer Even after being consumed, the skb holding the OOB 1-byte data stays in the recv queue to mark the OOB boundary and break recv() at that point. This must be considered while close()ing a socket. Let's skip the leading consumed OOB skb while checking the -ECONNRESET condition in unix_release_sock(). Fixes: 314001f0bf92 ("af_unix: Add OOB support") Reported-by: Christian Brauner <brauner@kernel.org> Closes: https://lore.kernel.org/netdev/20250529-sinkt-abfeuern-e7b08200c6b0@brauner/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://patch.msgid.link/20250619041457.1132791-4-kuni1840@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-24af_unix: Add test for consecutive consumed OOB.Kuniyuki Iwashima
Let's add a test case where consecutive concumed OOB skbs stay at the head of the queue. Without the previous patch, ioctl(SIOCATMARK) assertion fails. Before: # RUN msg_oob.no_peek.ex_oob_ex_oob_oob ... # msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1) # ex_oob_ex_oob_oob: Test terminated by assertion # FAIL msg_oob.no_peek.ex_oob_ex_oob_oob not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob After: # RUN msg_oob.no_peek.ex_oob_ex_oob_oob ... # OK msg_oob.no_peek.ex_oob_ex_oob_oob ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250619041457.1132791-3-kuni1840@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-24af_unix: Don't leave consecutive consumed OOB skbs.Kuniyuki Iwashima
Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) __alloc_skb (net/core/skbuff.c:660 (discriminator 4)) alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668) sock_alloc_send_pskb (net/core/sock.c:2993) unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418) __sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20)) __x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1)) __kasan_slab_free (mm/kasan/common.c:271) kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3)) unix_stream_read_generic (net/unix/af_unix.c:3010) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) The buggy address belongs to the object at ffff888106ef28c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 68 bytes inside of freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2 head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x200000000000040(head|node=0|zone=2) page_type: f5(slab) raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004 raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000 head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004 head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000 head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 314001f0bf92 ("af_unix: Add OOB support") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Jann Horn <jannh@google.com> Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-24wifi: mac80211: fix beacon interval calculation overflowLachlan Hodges
As we are converting from TU to usecs, a beacon interval of 100*1024 usecs will lead to integer wrapping. To fix change to use a u32. Fixes: 057d5f4ba1e4 ("mac80211: sync dtim_count to TSF") Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-24wifi: iwlegacy: work around excessive stack usage on clang/kasanArnd Bergmann
In some rare randconfig builds, I seem to trigger a bug in clang where it unrolls a loop but then runs out of registers, which then get spilled to the stack: net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than] This seems to be the same one I saw in the omapdrm driver, and there is an easy workaround by not inlining the il4965_rs_rate_scale_clear_win function. Link: https://github.com/llvm/llvm-project/issues/143908 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-06-23Merge branch 'bpf-specify-access-type-of-bpf_sysctl_get_name-args'Alexei Starovoitov
Jerome Marchand says: ==================== bpf: Specify access type of bpf_sysctl_get_name args The second argument of bpf_sysctl_get_name() helper is a pointer to a buffer that is being written to. However that isn't specify in the prototype. Until commit 37cce22dbd51a ("bpf: verifier: Refactor helper access type tracking") that mistake was hidden by the way the verifier treated helper accesses. Since then, the verifier, working on wrong infromation from the prototype, can make faulty optimization that would had been caught by the test_sysctl selftests if it was run by the CI. The first patch fixes bpf_sysctl_get_name prototype. The second patch converts the test_sysctl to prog_tests so that it will be run by the CI and catch similar issues in the future. Changes in v3: - Use ASSERT* macro instead of CHECK_FAIL. - Remove useless code. Changes in v2: - Replace ARG_PTR_TO_UNINIT_MEM by ARG_PTR_TO_MEM | MEM_WRITE. - Converts test_sysctl to prog_tests. ==================== Link: https://patch.msgid.link/20250619140603.148942-1-jmarchan@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 21:49:14 +0000