summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-14ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATIONNamjae Jeon
Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size. If fat/exfat is a local share, ->f_bsize is a cluster size that is too large to be used as a sector size. Sector sizes larger than 4K cause problem occurs when mounting an iso file through windows client. The error message can be obtained using Mount-DiskImage command, the error is: "Mount-DiskImage : The sector size of the physical disk on which the virtual disk resides is not supported." This patch reports fixed 4KB sector size if ->s_blocksize is bigger than 4KB. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: increment reference count of parent fpNamjae Jeon
Add missing increment reference count of parent fp in ksmbd_lookup_fd_inode(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: remove filename in ksmbd_fileNamjae Jeon
If the filename is change by underlying rename the server, fp->filename and real filename can be different. This patch remove the uses of fp->filename in ksmbd and replace it with d_path(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ext4: fix overhead calculation to account for the reserved gdt blocksTheodore Ts'o
The kernel calculation was underestimating the overhead by not taking into account the reserved gdt blocks. With this change, the overhead calculated by the kernel matches the overhead calculation in mke2fs. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2022-04-14dm: allow dm_accept_partial_bio() for dm_io without duplicate biosMike Snitzer
The intent behind commit e6fc9f62ce6e ("dm: flag clones created by __send_duplicate_bios") was to formally disallow the use of dm_accept_partial_bio() where it simply isn't possible -- due to constraint that multiple bios cannot meaningfully update a shared tio->len_ptr. But that commit went too far and disallowed the case where "abormal" IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by not marking a dm_io with a single dm_target_io (and bio), that happens to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO. Also remove 'unsigned *len' parameter from alloc_multiple_bios(). This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned when a WRITE_ZEROES bio is issued. Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-14Merge tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Eggs season holidays are among us, and I think I'd expect some smaller pulls for two weeks then. This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I didn't see a misc pull this week, so I expect that will catch up next week. i915: - Correct legacy mmap disabling to use GRAPHICS_VER_FULL msm: - system suspend fix - kzalloc return checks - misc display fix - iommu_present removal amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix" * tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: remove dtbclk_ss compensation for dcn316 drm/amdgpu: Enable gfxoff quirk on MacBook Pro drm/amdgpu: Ensure HDA function is suspended before ASIC reset drm/amdgpu: fix VCN 3.1.2 firmware name drm/amd/display: don't ignore alpha property on pre-multiplied mode drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP drm/msm/dp: add fail safe mode outside of event_mutex context drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init() drm/msm: Stop using iommu_present() drm/msm/mdp5: check the return of kzalloc() drm/msm: Fix range size vs end confusion drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL drm/msm/dpu: Use indexed array initializer to prevent mismatches drm/msm/disp: check the return value of kzalloc() dt-bindings: display/msm: another fix for the dpu-qcm2290 example drm/msm: Add missing put_task_struct() in debugfs path drm/msm/gpu: Remove mutex from wait_event condition drm/msm/gpu: Park scheduler threads for system suspend drm/msm/gpu: Rename runtime suspend/resume functions
2022-04-14Merge tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe) * tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio: vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
2022-04-14Merge tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: - two fixes related to unmount - symlink overflow fix - minor netfs fix - improved tracing for crediting (flow control) * tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: verify that tcon is valid before dereference in cifs_kill_sb cifs: potential buffer overflow in handling symlinks cifs: Split the smb3_add_credits tracepoint cifs: release cached dentries only if mount is complete cifs: Check the IOCB_DIRECT flag, not O_DIRECT
2022-04-14VFS: filename_create(): fix incorrect intent.NeilBrown
When asked to create a path ending '/', but which is not to be a directory (LOOKUP_DIRECTORY not set), filename_create() will never try to create the file. If it doesn't exist, -ENOENT is reported. However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems ->lookup() function, even though there is no intent to create. This is misleading and can cause incorrect behaviour. If you try ln -s foo /path/dir/ where 'dir' is a directory on an NFS filesystem which is not currently known in the dcache, this will fail with ENOENT. But as the name is not in the dcache, nfs_lookup gets called with LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any lookup, with the expectation that a subsequent call to create the target will be made, and the lookup can be combined with the creation. In the case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never made. Instead filename_create() sees that the dentry is not (yet) positive and returns -ENOENT - even though the directory actually exists. So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to create, and use the absence of these flags to decide if -ENOENT should be returned. Note that filename_parentat() is only interested in LOOKUP_REVAL, so we split that out and store it in 'reval_flag'. __lookup_hash() then gets reval_flag combined with whatever create flags were determined to be needed. Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15Merge tag 'amd-drm-fixes-5.18-2022-04-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-13: amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414025821.5811-1-alexander.deucher@amd.com
2022-04-14dt-bindings: display: panel-timing: Define a single type for propertiesRob Herring
It's not good practice to define multiple types for the same property, so factor out the type reference making the properties always an uint32-array with a length of 1 or 3 items. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20220413140016.3131013-1-robh@kernel.org
2022-04-14Merge tag 'at91-fixes-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes #1 for 5.18: Only DT fixes. They cover syntax issues as well as features: - fix dtschema check warnings for DMA channel entries, boolean properties and flash names - sam9g20ek audio clock and regulator description - sama5d[34]_xplained SPI pinctrl - align DT with hardware subtleties on sama7g5ek * tag 'at91-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: fix pinctrl phandles ARM: dts: at91: sama5d4_xplained: fix pinctrl phandle name ARM: dts: at91: Describe regulators on at91sam9g20ek ARM: dts: at91: Map MCLK for wm8731 on at91sam9g20ek ARM: dts: at91: Fix boolean properties with values ARM: dts: at91: use generic node name for dataflash ARM: dts: at91: align SPI NOR node name with dtschema ARM: dts: at91: sama7g5ek: Align the impedance of the QSPI0's HSIO and PCB lines ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines ARM: dts: at91: sama7g5: Swap `rx` and `tx` for `i2c` nodes Link: https://lore.kernel.org/r/20220414143318.26363-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge tag 'optee-fix-for-v5.18' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE fix missing mutex_destroy in probe error handling path * tag 'optee-fix-for-v5.18' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: add missing mutext_destroy in optee_ffa_probe Link: https://lore.kernel.org/r/20220413052001.GA49798@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge branch 'v5.18/fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes * 'v5.18/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO pin labeling for CON1 arm64: dts: remove cpu compatible "arm,armv8" for s4 arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards arm64: dts: meson: remove CPU opps below 1GHz for G12B boards Link: https://lore.kernel.org/r/1132bd6e-cd29-6e58-1fae-38e074545b25@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge tag 'imx-fixes-5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.18: - Increase DOMAIN_MAX_CLKS in imx8m-blk-ctrl driver to fix an ISI hang on i.MX8MN. - Fix spi-tx-bus-width on imx8mq-tqma8mq board. - Fix an SGTL5000 detection issue by moving MCLK pinctrl into SGTL5000 codec node. - Fix spi2 pin configuration on imx8mm-venice board. - Fix SCU clock controller's compatible property for i.MX8QM. - Fix SAI device compatible for i.MX8MN. - A couple of fixes from Rob to address issues in boolean properties and touchscreen property sizes. - Fix OTG controller over-current configuration for imx8mm-venice-gw boards. - Fix NULL but dereferenced coccicheck error in imx-weim driver. * tag 'imx-fixes-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes ARM: dts: imx: Fix boolean properties with values ARM: dts: imx8mm-venice-gw{71xx,72xx,73xx}: fix OTG controller OC mode arm64: dts: imx8mn: Fix SAI nodes arm64: dts: imx8mq-tqma8mq: change the spi-nor tx ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue soc: imx: imx8m-blk-ctrl: Fix IMX8MN_DISPBLK_PD_ISI hang arm64: dts: imx8qm: Correct SCU clock controller's compatible property arm64: dts: imx8mm-venice: fix spi2 pin configuration bus: imx-weim: fix NULL but dereferenced coccicheck error Link: https://lore.kernel.org/r/20220411024301.GH129381@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14ARM: config: Update Gemini defconfigLinus Walleij
The Gemini defconfig needs to be updated due to DSA driver Kconfig changes in the v5.18 merge window: CONFIG_NET_DSA_REALTEK_SMI is now behind CONFIG_NET_DSA_REALTEK and the desired DSA switch need to be selected explicitly with CONFIG_NET_DSA_REALTEK_RTL8366RB. Take this opportunity to update some other minor config options: - CONFIG_MARVELL_PHY moved around because of Kconfig changes. - CONFIG_SENSORS_DRIVETEMP should be selected since is regulates the system critical alert temperature on some devices, which is nice if it is handled even if initramfs or root fails to mount. Fixes: 319a70a5fea9 ("net: dsa: realtek-smi: move to subdirectory") Fixes: 765c39a4fafe ("net: dsa: realtek: convert subdrivers into modules") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with valuesRob Herring
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20220407225254.2178644-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14ARM: dts: align SPI NOR node name with dtschemaKrzysztof Kozlowski
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20220407143027.294678-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14ARM: dts: Fix more boolean properties with valuesRob Herring
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20220407225107.2175958-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge tag 'ux500-defconfig-soc-v5.18' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/fixes Defconfig updates for kernel v5.18: - Refresh defconfig with new and moved options - Add some new hardware drivers - Activate battery charging * tag 'ux500-defconfig-soc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: config: u8500: Re-enable AB8500 battery charging ARM: config: u8500: Add some common hardware ARM: config: Refresh U8500 defconfig Link: https://lore.kernel.org/r/CACRpkdY+_Go4XNzOh+Rvc24QBnUud2k-S7VQuaH5d-j71_dJog@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14Merge tag 's390-5.18-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Convert current_stack_pointer to a register alias like it is assumed if ARCH_HAS_CURRENT_STACK_POINTER is selected. The existing implementation as a function breaks CONFIG_HARDENED_USERCOPY sanity-checks - Get rid of -Warray-bounds warning within kexec code - Add minimal IBM z16 support by reporting a proper elf platform, and adding compile options - Update defconfigs * tag 's390-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: enable CONFIG_HARDENED_USERCOPY in debug_defconfig s390: current_stack_pointer shouldn't be a function s390: update defconfigs s390/kexec: silence -Warray-bounds warning s390: allow to compile with z16 optimizations s390: add z16 elf platform
2022-04-14Merge tag 'net-5.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from wireless and netfilter. Current release - regressions: - smc: fix af_ops of child socket pointing to released memory - wifi: ath9k: fix usage of driver-private space in tx_info Previous releases - regressions: - ipv6: fix panic when forwarding a pkt with no in6 dev - sctp: use the correct skb for security_sctp_assoc_request - smc: fix NULL pointer dereference in smc_pnet_find_ib() - sched: fix initialization order when updating chain 0 head - phy: don't defer probe forever if PHY IRQ provider is missing - dsa: revert "net: dsa: setup master before ports" - dsa: felix: fix tagging protocol changes with multiple CPU ports - eth: ice: - fix use-after-free when freeing @rx_cpu_rmap - revert "iavf: fix deadlock occurrence during resetting VF interface" - eth: lan966x: stop processing the MAC entry is port is wrong Previous releases - always broken: - sched: - flower: fix parsing of ethertype following VLAN header - taprio: check if socket flags are valid - nfc: add flush_workqueue to prevent uaf - veth: ensure eth header is in skb's linear part - eth: stmmac: fix altr_tse_pcs function when using a fixed-link - eth: macb: restart tx only if queue pointer is lagging - eth: macvlan: fix leaking skb in source mode with nodst option" * tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: bcmgenet: Revert "Use stronger register read/writes to assure ordering" rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies net: dsa: felix: fix tagging protocol changes with multiple CPU ports tun: annotate access to queue->trans_start nfc: nci: add flush_workqueue to prevent uaf net: dsa: realtek: don't parse compatible string for RTL8366S net: dsa: realtek: fix Kconfig to assure consistent driver linkage net: ftgmac100: access hardware register after clock ready Revert "net: dsa: setup master before ports" macvlan: Fix leaking skb in source mode with nodst option netfilter: nf_tables: nft_parse_register can return a negative value net: lan966x: Stop processing the MAC entry is port is wrong. net: lan966x: Fix when a port's upper is changed. net: lan966x: Fix IGMP snooping when frames have vlan tag net: lan966x: Update lan966x_ptp_get_nominal_value sctp: Initialize daddr on peeled off socket net/smc: Fix af_ops of child socket pointing to released memory net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() net/smc: use memcpy instead of snprintf to avoid out of bounds read net: macb: Restart tx only if queue pointer is lagging ...
2022-04-14Merge tag 'sound-5.18-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became an unexpectedly large pull request due to various regression fixes in the previous kernels. The majority of fixes are a series of patches to address the regression at probe errors in devres'ed drivers, while there are yet more fixes for the x86 SG allocations and for USB-audio buffer management. In addition, a few HD-audio quirks and other small fixes are found" * tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits) ALSA: usb-audio: Limit max buffer and period sizes per time ALSA: memalloc: Add fallback SG-buffer allocations for x86 ALSA: nm256: Don't call card private_free at probe error path ALSA: mtpav: Don't call card private_free at probe error path ALSA: rme9652: Fix the missing snd_card_free() call at probe error ALSA: hdspm: Fix the missing snd_card_free() call at probe error ALSA: hdsp: Fix the missing snd_card_free() call at probe error ALSA: oxygen: Fix the missing snd_card_free() call at probe error ALSA: lx6464es: Fix the missing snd_card_free() call at probe error ALSA: cmipci: Fix the missing snd_card_free() call at probe error ALSA: aw2: Fix the missing snd_card_free() call at probe error ALSA: als300: Fix the missing snd_card_free() call at probe error ALSA: lola: Fix the missing snd_card_free() call at probe error ALSA: bt87x: Fix the missing snd_card_free() call at probe error ALSA: sis7019: Fix the missing error handling ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error ALSA: via82xx: Fix the missing snd_card_free() call at probe error ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error ALSA: rme96: Fix the missing snd_card_free() call at probe error ALSA: rme32: Fix the missing snd_card_free() call at probe error ...
2022-04-14dt-bindings: Fix array constraints on scalar propertiesRob Herring
Scalar properties shouldn't have array constraints (minItems, maxItems, items). These constraints can simply be dropped with any constraints under 'items' moved up a level. Cc: Agathe Porte <agathe.porte@nokia.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Olivier Moysan <olivier.moysan@foss.st.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Yunfei Dong <yunfei.dong@mediatek.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-hwmon@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-iio@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220413140121.3132837-1-robh@kernel.org
2022-04-14Merge tag 'for-5.18-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more code and warning fixes. There's one feature ioctl removal patch slated for 5.18 that did not make it to the main pull request. It's just a one-liner and the ioctl has a v2 that's in use for a long time, no point to postpone it to 5.19. Late update: - remove balance v1 ioctl, superseded by v2 in 2012 Fixes: - add back cgroup attribution for compressed writes - add super block write start/end annotations to asynchronous balance - fix root reference count on an error handling path - in zoned mode, activate zone at the chunk allocation time to avoid ENOSPC due to timing issues - fix delayed allocation accounting for direct IO Warning fixes: - simplify assertion condition in zoned check - remove an unused variable" * tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix btrfs_submit_compressed_write cgroup attribution btrfs: fix root ref counts in error handling in btrfs_get_root_ref btrfs: zoned: activate block group only for extent allocation btrfs: return allocated block group from do_chunk_alloc() btrfs: mark resumed async balance as writing btrfs: remove support of balance v1 ioctl btrfs: release correct delalloc amount in direct IO write path btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups() btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range
2022-04-14Merge tag 'fscache-fixes-20220413' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull fscache fixes from David Howells: "Here's a collection of fscache and cachefiles fixes and misc small cleanups. The two main fixes are: - Add a missing unmark of the inode in-use mark in an error path. - Fix a KASAN slab-out-of-bounds error when setting the xattr on a cachefiles volume due to the wrong length being given to memcpy(). In addition, there's the removal of an unused parameter, removal of an unused Kconfig option, conditionalising a bit of procfs-related stuff and some doc fixes" * tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: fscache: remove FSCACHE_OLD_API Kconfig option fscache: Use wrapper fscache_set_cache_state() directly when relinquishing fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS fscache: Remove the cookie parameter from fscache_clear_page_bits() docs: filesystems: caching/backend-api.rst: fix an object withdrawn API docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr cachefiles: unmark inode in use in error path
2022-04-14block: null_blk: end timed out poll requestMing Lei
When poll request is timed out, it is removed from the poll list, but not completed, so the request is leaked, and never get chance to complete. Fix the issue by ending it in timeout handler. Fixes: 0a593fbbc245 ("null_blk: poll queue support") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220413084836.1571995-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14block: fix offset/size check in bio_trim()Ming Lei
Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size is sector. Fix the above issue in checking offset/size in bio_trim(). Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()") Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14USB: quirks: add STRING quirk for VCOM deviceOliver Neukum
This has been reported to stall if queried Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14USB: quirks: add a Realtek card readerOliver Neukum
This device is reported to stall when enummerated. Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-14ice: Fix memory leak in ice_get_orom_civd_data()Jianglei Nie
A memory chunk was allocated for orom_data in ice_get_orom_civd_data() by vzmalloc(). But when ice_read_flash_module() fails, the allocated memory is not freed, which will lead to a memory leak. We can fix it by freeing the orom_data when ce_read_flash_module() fails. Fixes: af18d8866c80 ("ice: reduce time to read Option ROM CIVD data") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: fix crash in switchdev modeWojciech Drewek
Below steps end up with crash: - modprobe ice - devlink dev eswitch set $PF1_PCI mode switchdev - echo 64 > /sys/class/net/$PF1/device/sriov_numvfs - rmmod ice Calling ice_eswitch_port_start_xmit while the process of removing VFs is in progress ends up with NULL pointer dereference. That's because PR netdev is not released but some resources are already freed. Fix it by checking if ICE_VF_DIS bit is set. Call trace: [ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040 [ 1379.595284] #PF: supervisor read access in kernel mode [ 1379.595410] #PF: error_code(0x0000) - not-present page [ 1379.595535] PGD 0 P4D 0 [ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI [ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12 [ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019 [ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice] [ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00 [ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246 [ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000 [ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000 [ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001 [ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000 [ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000 [ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000 [ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0 [ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1379.598015] Call Trace: [ 1379.598153] <TASK> [ 1379.598294] dev_hard_start_xmit+0xd9/0x220 [ 1379.598444] sch_direct_xmit+0x8a/0x340 [ 1379.598592] __dev_queue_xmit+0xa3c/0xd30 [ 1379.598739] ? packet_parse_headers+0xb4/0xf0 [ 1379.598890] packet_sendmsg+0xa15/0x1620 [ 1379.599038] ? __check_object_size+0x46/0x140 [ 1379.599186] sock_sendmsg+0x5e/0x60 [ 1379.599330] ____sys_sendmsg+0x22c/0x270 [ 1379.599474] ? import_iovec+0x17/0x20 [ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90 [ 1379.599771] ___sys_sendmsg+0x81/0xc0 [ 1379.599917] ? __pollwait+0xd0/0xd0 [ 1379.600061] ? preempt_count_add+0x68/0xa0 [ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40 [ 1379.600369] ? ep_done_scan+0xc9/0x110 [ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40 [ 1379.600622] ? preempt_count_add+0x68/0xa0 [ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40 [ 1379.600899] ? __fget_light+0x8f/0x110 [ 1379.601024] __sys_sendmsg+0x49/0x80 [ 1379.601148] ? release_ds_buffers+0x50/0xe0 [ 1379.601274] do_syscall_64+0x3b/0x90 [ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 1379.601525] RIP: 0033:0x7f72c1e2e35d Fixes: f5396b8a663f ("ice: switchdev slow path") Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: allow creating VFs for !CONFIG_NET_SWITCHDEVMaciej Fijalkowski
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to create VFs properly as call to ice_eswitch_configure() returns -EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on CONFIG_NET_SWITCHDEV. Change the ice_eswitch_configure() implementation for !CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let ice_ena_vfs() finish its work properly. CC: Grzegorz Nitka <grzegorz.nitka@intel.com> Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14ice: xsk: check if Rx ring was filled up to the endMaciej Fijalkowski
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-14EDAC/synopsys: Read the error count from the correct registerShubhrajyoti Datta
Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
2022-04-14perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1KAthira Rajeev
The 'perf bench numa' testcase fails on systems with more than 1K CPUs. Testcase: perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp 1 Snippet of code: <<>> perf: bench/numa.c:302: bind_to_node: Assertion `!(ret)' failed. Aborted (core dumped) <<>> bind_to_node() uses "sched_getaffinity" to save the original cpumask and this call is returning EINVAL ((invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size. Apart from fixing this for "orig_mask", apply same logic to "mask" as well which is used to setaffinity so that mask size is large enough to represent number of possible CPU's in the system. sched_getaffinity is used in one more place in perf numa bench. It is in "bind_to_cpu" function. Apply the same logic there also. Though currently no failure is reported from there, it is ideal to change getaffinity to work with such system configurations having CPU's more than default mask size supported by glibc. Also fix "sched_setaffinity" to use mask size which is large enough to represent number of possible CPU's in the system. Fixed all places where "bind_cpumask" which is part of "struct thread_data" is used such that bind_cpumask works in all configuration. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf bench: Fix numa testcase to check if CPU used to bind task is onlineAthira Rajeev
Perf numa bench test fails with error: Testcase: ./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk Failure snippet: <<>> Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk" perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed. <<>> The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list", There is check to see if cpu number is greater than max cpu's possible in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >= g->p.nr_cpus) {". But it could happen that system has say 48 CPU's, but only number of online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is 48, so function will go ahead and set bit for CPU 8 also in cpumask ( td->bind_cpumask). bind_to_cpumask function is called to set affinity using sched_setaffinity and the cpumask. Since the CPU8 is not present, set affinity will fail here with EINVAL. Fix this issue by adding a check to make sure that, CPU's provided in the input argument values are online before proceeding further and skip the test. For this, include new helper function "is_cpu_online" in "tools/perf/util/header.c". Since "BIT(x)" definition will get included from header.h, remove that from bench/numa.c Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220412164059.42654-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14perf record: Fix per-thread optionAlexey Bayduraev
Per-thread mode doesn't have specific CPUs for events, add checks for this case. Minor fix to a pr_debug by Ian Rogers <irogers@google.com> to avoid an out of bound array access. Fixes: 7954f71689f90cb2 ("perf record: Introduce thread affinity and mmap masks") Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Alexey Bayduraev <alexey.bayduraev@gmail.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220414014642.3308206-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-14arm64: fix typos in commentsKen Kurematsu
Fix a typo "cortex" Signed-off-by: Ken Kurematsu <k.kurematsu@nskint.co.jp> Link: https://lore.kernel.org/r/OSBPR01MB3288B15006E15C64D4D617F7DBEF9@OSBPR01MB3288.jpnprd01.prod.outlook.com Signed-off-by: Will Deacon <will@kernel.org>
2022-04-14arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clangNathan Chancellor
Will and Anders reported that using just 'CC=clang' with CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y would result in an error while linking: aarch64-linux-gnu-ld: .init.data has both ordered [`__patchable_function_entries' in init/main.o] and unordered [`.meminit.data' in mm/sparse.o] sections aarch64-linux-gnu-ld: final link failed: bad value This error was exposed by commit f12b034afeb3 ("scripts/Makefile.clang: default to LLVM_IAS=1") in combination with binutils older than 2.36. When '-fpatchable-function-entry' was implemented in LLVM, two code paths were added for adding the section attributes, one for the integrated assembler and another for GNU as, due to binutils deficiencies at the time. If the integrated assembler was used, attributes that GNU ld < 2.36 could not handle were added, presumably with the assumption that use of the integrated assembler meant the whole LLVM stack was being used, namely ld.lld. Prior to the kernel change previously mentioned, that assumption was valid, as there were three commonly used combinations of tools for compiling, assembling, and linking respectively: $ make CC=clang (clang, GNU as, GNU ld) $ make LLVM=1 (clang, GNU as, ld.lld) $ make LLVM=1 LLVM_IAS=1 (clang, integrated assembler, ld.lld) After the default switch of the integrated assembler, the second and third commands become equivalent and the first command means "clang, integrated assembler, and GNU ld", which was not a combination that was considered when the aforementioned LLVM change was implemented. It is not possible to go back and fix LLVM, as this change was implemented in the 10.x series, which is no longer supported. To workaround this on the kernel side, split out the selection of HAVE_DYNAMIC_FTRACE_WITH_REGS to two separate configurations, one for GCC and one for clang. The GCC config inherits the '-fpatchable-function-entry' check. The Clang config does not it, as '-fpatchable-function-entry' is always available for LLVM 11.0.0 and newer, which is the supported range of versions for the kernel. The Clang config makes sure that the user is using GNU as or the integrated assembler with ld.lld or GNU ld 2.36 or newer, which will avoid the error above. Link: https://github.com/ClangBuiltLinux/linux/issues/1507 Link: https://github.com/ClangBuiltLinux/linux/issues/788 Link: https://lore.kernel.org/YlCA5PoIjF6nhwYj@dev-arch.thelio-3990X/ Link: https://sourceware.org/bugzilla/show_bug.cgi?id=26256 Link: https://github.com/llvm/llvm-project/commit/7fa5290d5bd5632d7a36a4ea9f46e81e04fb819e Link: https://github.com/llvm/llvm-project/commit/853a2649160c1c80b9bbd38a20b53ca8fab704e8 Reported-by: Anders Roxell <anders.roxell@linaro.org> Reported-by: Will Deacon <will@kernel.org> Tested-by: Will Deacon <will@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220413181420.3522187-1-nathan@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-04-14ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35Adam Ford
The pinout of the OMAP35 and DM37 variants of the SOM-LV are the same, but the macros which define the pinmuxing are different between OMAP3530 and DM3730. The pinmuxing was correct for for the DM3730, but wrong for the OMAP3530. Since the boot loader was correctly pin-muxing the pins, this was not obvious. As the bootloader not guaranteed to pinmux all the pins any more, this causes an issue, so the pinmux needs to be moved from a common file to their respective board files. Fixes: f8a2e3ff7103 ("ARM: dts: Add minimal support for LogicPD OMAP35xx SOM-LV devkit") Signed-off-by: Adam Ford <aford173@gmail.com> Message-Id: <20220303171818.11060-1-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-14ARM: dts: am3517-evm: Fix misc pinmuxingAdam Ford
The bootloader for the AM3517 has previously done much of the pin muxing, but as the bootloader is moving more and more to a model based on the device tree, it may no longer automatically mux the pins, so it is necessary to add the pinmuxing to the Linux device trees so the respective peripherals can remain functional. Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio") Signed-off-by: Adam Ford <aford173@gmail.com> Message-Id: <20220226214820.747847-1-aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-14ARM: dts: am33xx-l4: Add missing touchscreen clock propertiesMiquel Raynal
When adding support for TI magadc (Magnetic Stripe Reader and ADC), the MFD driver common to the touchscreen and the ADC got updated to ease the insertion of a new DT node for the ADC, with its own compatible, clocks, etc. Commit 235a96e92c16 ("mfd: ti_am335x_tscadc: Don't search the tree for our clock") removed one compatible specific information which was the clock name, because the clock was looked up from scratch in the DT while this hardware block was only fed by a single clock, already defined and properly filled in the DT. Problem is, this change was only validated with an am437x-based board, where the clocks are effectively correctly defined and referenced. But on am33xx, the ADC clock is also correctly defined but is not referenced with a clock phandle as it ought to be. The touchscreen bindings clearly state that the clocks/clock-names properties are mandatory, but they have been forgotten in one DTSI. This was probably not noticed in the first place because of the clock actually existing and the clk_get() call going through all the tree anyway. Add the missing clock phandles in the am33xx touchscreen description. Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Fixes: 235a96e92c16 ("mfd: ti_am335x_tscadc: Don't search the tree for our clock") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Message-Id: <20220314163445.79807-1-miquel.raynal@bootlin.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-14ARM: dts: Fix mmc order for omap3-gta04H. Nikolaus Schaller
Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") introduces general mmc aliases. Let's tailor them to the need of the GTA04 board which does not make use of mmc2 and mmc3 interfaces. Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Message-Id: <dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2022-04-14gpio: sim: fix setting and getting multiple linesBartosz Golaszewski
We need to take mask into account in the set/get_multiple() callbacks. Use bitmap_replace() instead of bitmap_copy(). Fixes: cb8c474e79be ("gpio: sim: new testing module") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-04-14net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS repliesPetr Machata
When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns size of 0, which is supposed to be an indication that the corresponding attribute should not be emitted. However, instead, the current code reserves a 0-byte attribute. The reason this does not show up as a citation on a kasan kernel is that netdev_offload_xstats_get(), which is supposed to fill in the data, never ends up getting called, because rtnl_offload_xstats_get_stats() notices that the stats are not actually used and skips the call. Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a response, confusing the userspace. Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill(). Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14net: dsa: felix: fix tagging protocol changes with multiple CPU portsVladimir Oltean
When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14interconnect: qcom: sdx55: Drop IP0 interconnectsStephen Boyd
Similar to the sc7180 commit, let's drop the IP0 interconnects here because the IP0 resource is also used in the clk-rpmh driver on sdx55. It's bad to have the clk framework and interconnect framework control the same RPMh resource without any coordination. The rpmh driver in the kernel doesn't aggregate resources between clients either, so leaving control to clk-rpmh avoids any issues with unused interconnects turning off IP0 behind the back of the clk framework. Cc: Alex Elder <elder@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: b2150cab9a97 ("clk: qcom: rpmh: add support for SDX55 rpmh IPA clock") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220412220033.1273607-3-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-04-14interconnect: qcom: sc7180: Drop IP0 interconnectsStephen Boyd
The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and modeled as a clk, but this interconnect driver still had it modeled as an interconnect. This was mostly OK because nobody used the interconnect definition, until the interconnect framework started dropping bandwidth requests on interconnects that aren't used via the sync_state callback in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once that patch was applied the IP0 resource was going to be controlled from two places, the clk framework and the interconnect framework. Even then, things were probably going to be OK, because commit b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") was needed to actually drop bandwidth requests on unused interconnects, of which the IPA was one of the interconnect that wasn't getting dropped to zero. Combining the three commits together leads to bad behavior where the interconnect framework is disabling the IP0 resource because it has no users while the clk framework thinks the IP0 resource is on because the only user, the IPA driver, has turned it on via clk_prepare_enable(). Depending on when sync_state is called, we can get into a situation like below: IPA driver probes IPA driver gets notified modem started runtime PM get() IPA clk enabled -> IP0 resource is ON sync_state runs interconnect zeroes out the IP0 resource -> IP0 resource is off IPA driver tries to access a register and blows up The crash is an unclocked access that manifest as an SError. SError Interrupt on CPU0, code 0xbe000011 -- SError CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x4c/0x80 lr : mutex_lock+0x30/0x80 sp : ffffffc00da9b9c0 x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000 x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8 x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00 x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000 x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080 x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28 x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace+0xf4/0x114 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 panic+0x150/0x38c nmi_panic+0x88/0xa0 arm64_serror_panic+0x74/0x80 do_serror+0x0/0x80 do_serror+0x58/0x80 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x78/0x7c mutex_lock+0x4c/0x80 __gsi_channel_start+0x50/0x17c gsi_channel_start+0x54/0x90 ipa_endpoint_enable_one+0x34/0xc0 ipa_open+0x4c/0x120 Remove all IP0 resource management from the interconnect driver so that clk-rpmh is the sole owner. This fixes the issue by preventing the interconnect driver from overwriting the IP0 resource data that the clk-rpmh driver wrote. Cc: Alex Elder <elder@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Alex Elder <elder@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 20:09:49 +0000