summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-25net: hns: Fix kernel-docYang Li
Fix function name in hns_ethtool.c kernel-doc comment to remove these warnings found by clang_w1. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 'commit 262b38cdb3e4 ("net: ethernet: hisilicon: hns: use phydev from struct net_device")' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: hns3: switch to dim algorithm for adaptive interrupt moderationHuazhong Tan
The Linux kernel has support for a dynamic interrupt moderation algorithm known as "dimlib". Replace the custom driver-specific implementation of dynamic interrupt moderation with the kernel's algorithm. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25net: bridge: remove redundant assignmentNigel Christian
The variable br is assigned a value that is not being read after exiting case IFLA_STATS_LINK_XSTATS_SLAVE. The assignment is redundant and can be removed. Addresses-Coverity ("Unused value") Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25sctp: fix the proc_handler for sysctl encap_portXin Long
proc_dointvec() cannot do min and max check for setting a value when extra1/extra2 is set, so change it to proc_dointvec_minmax() for sysctl encap_port. Fixes: e8a3001c2120 ("sctp: add encap_port for netns sock asoc and transport") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25sctp: add the missing setting for asoc encap_portXin Long
This patch is to add the missing setting back for asoc encap_port. Fixes: 8dba29603b5c ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-25proc: Check /proc/$pid/attr/ writes against file openerKees Cook
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/ files need to check the opener credentials, since these fds do not transition state across execve(). Without this, it is possible to trick another process (which may have different credentials) to write to its own /proc/$pid/attr/ files, leading to unexpected and possibly exploitable behaviors. [1] https://www.kernel.org/doc/html/latest/security/credentials.html?highlight=confused#open-file-credentials Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-25bpf, selftests: Adjust few selftest result_unpriv outcomesDaniel Borkmann
Given we don't need to simulate the speculative domain for registers with immediates anymore since the verifier uses direct imm-based rewrites instead of having to mask, we can also lift a few cases that were previously rejected. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-05-25bpf: No need to simulate speculative domain for immediatesDaniel Borkmann
In 801c6058d14a ("bpf: Fix leakage of uninitialized bpf stack under speculation") we replaced masking logic with direct loads of immediates if the register is a known constant. Given in this case we do not apply any masking, there is also no reason for the operation to be truncated under the speculative domain. Therefore, there is also zero reason for the verifier to branch-off and simulate this case, it only needs to do it for unknown but bounded scalars. As a side-effect, this also enables few test cases that were previously rejected due to simulation under zero truncation. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-05-25bpf: Fix mask direction swap upon off reg sign changeDaniel Borkmann
Masking direction as indicated via mask_to_left is considered to be calculated once and then used to derive pointer limits. Thus, this needs to be placed into bpf_sanitize_info instead so we can pass it to sanitize_ptr_alu() call after the pointer move. Piotr noticed a corner case where the off reg causes masking direction change which then results in an incorrect final aux->alu_limit. Fixes: 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask") Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-05-25bpf: Wrap aux data inside bpf_sanitize_info containerDaniel Borkmann
Add a container structure struct bpf_sanitize_info which holds the current aux info, and update call-sites to sanitize_ptr_alu() to pass it in. This is needed for passing in additional state later on. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2021-05-25bpf: Fix BPF_LSM kconfig symbol dependencyDaniel Borkmann
Similarly as 6bdacdb48e94 ("bpf: Fix BPF_JIT kconfig symbol dependency") we need to detangle the hard BPF_LSM dependency on NET. This was previously implicit by its dependency on BPF_JIT which itself was dependent on NET (but without any actual/real hard dependency code-wise). Given the latter was lifted, so should be the former as BPF_LSMs could well exist on net-less systems. This therefore also fixes a randconfig build error recently reported by Randy: ld: kernel/bpf/bpf_lsm.o: in function `bpf_lsm_func_proto': bpf_lsm.c:(.text+0x1a0): undefined reference to `bpf_sk_storage_get_proto' ld: bpf_lsm.c:(.text+0x1b8): undefined reference to `bpf_sk_storage_delete_proto' [...] Fixes: b24abcff918a ("bpf, kconfig: Add consolidated menu entry for bpf with core options") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org>
2021-05-25Merge tag 'netfs-lib-fixes-20200525' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull netfs fixes from David Howells: "A couple of fixes to the new netfs lib: - Pass the AOP flags through from netfs_write_begin() into grab_cache_page_write_begin(). - Automatically enable in Kconfig netfs lib rather than presenting an option for manual enablement" * tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manual netfs: Pass flags through to grab_cache_page_write_begin()
2021-05-25afs: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple fallthrough pseudo-keywords in places where the code is intended to fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/51150b54e0b0431a2c401cd54f2c4e7f50e94601.1605896059.git.gustavoars@kernel.org/ # v1 Link: https://lore.kernel.org/r/20210420211615.GA51432@embeddedor/ # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-25selftests/bpf: Add test for l3 use of bpf_redirect_peerJussi Maki
Add a test case for using bpf_skb_change_head() in combination with bpf_redirect_peer() to redirect a packet from a L3 device to veth and back. The test uses a BPF program that adds L2 headers to the packet coming from a L3 device and then calls bpf_redirect_peer() to redirect the packet to a veth device. The test fails as skb->mac_len is not set properly and thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(), causing tcp_v4_rcv() to point the TCP header into middle of the IP header. Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210525102955.2811090-1-joamaki@gmail.com
2021-05-25bpftool: Add sock_release help info for cgroup attach/prog load commandLiu Jian
The help information was not added at the time when the function got added. Fix this and add the missing information to its cli, documentation and bash completion. Fixes: db94cc0b4805 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
2021-05-25netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manualDavid Howells
Make the netfs helper library selected automatically by the things that use it rather than being manually configured, even though it's required[1]. Fixes: 3a5829fefd3b ("netfs: Make a netfs helper module") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/CAMuHMdXJZ7iNQE964CdBOU=vRKVMFzo=YF_eiwsGgqzuvZ+TuA@mail.gmail.com [1] Link: https://lore.kernel.org/r/162090298141.3166007.2971118149366779916.stgit@warthog.procyon.org.uk # v1
2021-05-25netfs: Pass flags through to grab_cache_page_write_begin()David Howells
In netfs_write_begin(), pass the AOP flags through to grab_cache_page_write_begin() so that a request to use GFP_NOFS is honoured. Fixes: e1b1240c1ff5 ("netfs: Add write_begin helper") Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/162090295383.3165945.13595101698295243662.stgit@warthog.procyon.org.uk # v1
2021-05-24Merge tag 'perf-tools-fixes-for-v5.13-2021-05-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool fixes from Arnaldo Carvalho de Melo: - Fix 'perf script' decoding of Intel PT traces for abort handling and sample instruction bytes. - Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT 'perf script' decoder. - Fixes for the python based Intel PT trace viewer GUI. - Sync UAPI copies (unwire quotactl_path, some comment fixes). - Fix handling of missing kernel software events, such as the recently added 'cgroup-switches', and add the trivial glue for it in the tooling side, since it was added in this merge window. - Add missing initialization of zstd_data in 'perf buildid-list', detected with valgrind's memcheck. - Remove needless event enable/disable when all events uses BPF. - Fix libpfm4 support (63) test error for nested event groups. * tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Skip evlist__[enable|disable] when all events uses BPF perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit perf scripts python: exported-sql-viewer.py: Fix warning display perf scripts python: exported-sql-viewer.py: Fix Array TypeError perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report tools headers UAPI: Sync files changed by the quotactl_path unwiring tools headers UAPI: Sync linux/perf_event.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources perf parse-events: Check if the software events array slots are populated perf tools: Add 'cgroup-switches' software event perf intel-pt: Remove redundant setting of ptq->insn_len perf intel-pt: Fix sample instruction bytes perf intel-pt: Fix transaction abort handling perf test: Fix libpfm4 support (63) test error for nested event groups tools arch kvm: Sync kvm headers with the kernel sources perf buildid-list: Initialize zstd_data
2021-05-24net: dsa: microchip: enable phy errata workaround on 9567George McCollister
Also enable phy errata workaround on 9567 since has the same errata as the 9477 according to the manufacture's documentation. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: usb: fix memory leak in smsc75xx_bindPavel Skripkin
Syzbot reported memory leak in smsc75xx_bind(). The problem was is non-freed memory in case of errors after memory allocation. backtrace: [<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460 [<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728 Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Cc: stable@kernel.vger.org Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hsr: fix mac_len checksGeorge McCollister
Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") added the following which resulted in -EINVAL always being returned: if (skb->mac_len < sizeof(struct hsr_ethhdr)) return -EINVAL; mac_len was not being set correctly so this check completely broke HSR/PRP since it was always 14, not 20. Set mac_len correctly and modify the mac_len checks to test in the correct places since sometimes it is legitimately 14. Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24Merge branch 'wan-cleanups'David S. Miller
Guangbin Huang says: ==================== net: wan: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: add braces {} to all arms of the statementPeng Li
Braces {} should be used on all arms of this statement. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: fix the comments style issuePeng Li
Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: replace comparison to NULL with "!card"Peng Li
According to the chackpatch.pl, comparison to NULL could be written "!card". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: move out assignment in if conditionPeng Li
Should not use assignment in if condition. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: add some required spacesPeng Li
Add space required after that close brace '}'. Add space required before the open parenthesis '('. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: fix the code style issue about trailing statementsPeng Li
Trailing statements should be on next line. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: code indent use tabs where possiblePeng Li
Code indent should use tabs where possible. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: add blank line after declarationsPeng Li
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: fix an code style issue about "foo* bar"Peng Li
Fix the checkpatch error as "foo* bar" and should be "foo *bar", and "(foo*)" should be "(foo *)". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: wan: remove redundant blank linesPeng Li
This patch removes some redundant blank lines. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: appletalk: cops: Fix data race in cops_probe1Saubhik Mukherjee
In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24Merge branch 'sja1105-sja1110-prep'David S. Miller
Vladimir Oltean says: ==================== SJA1105 DSA driver preparation for new switch introduction (SJA1110) This series contains refactoring patches which are necessary before the support for the new NXP SJA1110 switch can be introduced in this driver. As far as this series is concerned, here is the list of major changes introduced with the SJA1110: - 11 ports vs 5 - port 0 goes to the internal microcontroller, so it is unused as far as DSA is concerned - the Clock Generation Unit does not need any configuration for setting up the PLLs for MII/RMII/RGMII - the L2 Policing Table contains multicast policers too, not just broadcast and per-traffic class. These must be minimally initialized. - more frame buffers ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: allow the frame buffer size to be customizedVladimir Oltean
The shared frame buffer of the SJA1110 is larger than that of SJA1105, which is natural due to the fact that there are more ports. Introduce yet another property in struct sja1105_info which encodes the maximum number of 128 byte blocks that can be used for frame buffers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: configure the multicast policers, if presentVladimir Oltean
The SJA1110 policer array is similar in layout with SJA1105, except it contains one multicast policer per port at the end. Detect the presence of multicast policers based on the maximum number of supported L2 Policing Table entries, and make those policers have a shared index equal to the port's default policer. Letting the user configure these policers is not supported at the moment. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: use sja1105_xfer_u32 for the reset procedureVladimir Oltean
Using sja1105_xfer_buf results in a higher overhead and is harder to read. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: dynamically choose the number of static config table entriesVladimir Oltean
Due to the fact that the port count is different, some static config tables have a different number of elements in SJA1105 compared to SJA1110. Such an example is the L2 Policing table, which has 45 entries in SJA1105 (one per port x traffic class, and one broadcast policer per port) and 110 entries in SJA1110 (one per port x traffic class, one broadcast and one multicast policer per port). Similarly, the MAC Configuration Table, the L2 Forwarding table, all have a different number of elements simply because the port count is different, and although this can be accounted for by looking at ds->ports, the policing table can't because of the presence of the extra multicast policers. The common denominator for the static config initializers for these tables is that they must set up all the entries within that table. So the simplest way to account for these differences in a uniform manner is to look at struct sja1105_table_ops::max_entry_count. For the sake of uniformity, this patch makes that change also for tables whose number of elements did not change in SJA1110, like the xMII Mode Parameters, the L2 Lookup Parameters, General Parameters, AVB Parameters (all of these are singleton tables with a single entry). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: skip CGU configuration if it's unnecessaryVladimir Oltean
There are two distinct code paths which enter sja1105_clocking.c, one through sja1105_clocking_setup() and the other through sja1105_clocking_setup_port(): sja1105_static_config_reload sja1105_setup | | | +------------------+ | | v v sja1105_clocking_setup sja1105_adjust_port_config | | v | sja1105_clocking_setup_port <------------------+ As opposed to SJA1105, the SJA1110 does not need any configuration of the Clock Generation Unit in order for xMII ports to work. Just RGMII internal delays need to be configured, and that is done inside sja1105_clocking_setup_port for the RGMII ports. So this patch introduces the concept of a "reserved address", which the CGU configuration functions from sja1105_clocking.c must check before proceeding to do anything. The SJA1110 will have reserved addresses for the CGU PLLs for MII/RMII/RGMII. Additionally, make sja1105_clocking_setup() a function pointer so it can be overridden by the SJA1110. Even though nothing port-related needs to be done in the CGU, there are some operations such as disabling the watchdog clock which are unique to the SJA1110. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: don't assign the host port using dsa_upstream_port()Vladimir Oltean
If @port is unused, then dsa_upstream_port(ds, port) returns @port, which means we cannot assume the CPU port can be retrieved this way. The sja1105 switches support a single CPU port, so just iterate over the switch ports and stop at the first CPU port we see. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: dimension the data structures for a larger port countVladimir Oltean
Introduce a SJA1105_MAX_NUM_PORTS macro which at the moment is equal to SJA1105_NUM_PORTS (5). With the introduction of SJA1110, these structures will need to hold information for up to 11 ports. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: avoid some work for unused portsVladimir Oltean
Do not put unused ports in the forwarding domain, and do not allocate FDB entries for dynamic address learning for them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: parameterize the number of portsVladimir Oltean
The sja1105 driver will gain support for the next-gen SJA1110 switch, which is very similar except for the fact it has more than 5 ports. So we need to replace the hardcoded SJA1105_NUM_PORTS in this driver with ds->num_ports. This patch is as mechanical as possible (save for the fact that ds->num_ports is not an integer constant expression). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24Merge branch 'hns3-promisc-updates'David S. Miller
Huazhong Tan says: ==================== net: hns3: add two promisc mode updates This series includes two updates related to promisc mode for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hns3: use HCLGE_VPORT_STATE_PROMISC_CHANGE to replace ↵Jian Shen
HCLGE_STATE_PROMISC_CHANGED Currently, PF is using HCLGE_STATE_PROMISC_CHANGED to indicate need synchronize the promisc mode for itself, and using flag HCLGE_VPORT_STATE_PROMISC_CHANGE for its VF. To keep consistent, remove flag HCLGE_STATE_PROMISC_CHANGED, and use flag HCLGE_VPORT_STATE_PROMISC_CHANGE instead. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hns3: configure promisc mode for VF asynchronouslyJian Shen
Currently, when host set VF untrusted, the driver will disable the promisc mode of VF. It may be conflicted when the VF requests the host to set promisc mode. So refactor it by changing promisc mode for VF asynchronously. With this change, the promisc mode of VF can be restored when the VF being trusted again. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24Merge branch 'sja1105-fixes'David S. Miller
Vladimir Oltean says: ==================== Fixes for SJA1105 DSA driver This series contains some minor fixes in the sja1105 driver: - improved error handling in the probe path - rejecting an invalid phy-mode specified in the device tree - register access fix for SJA1105P/Q/R/S for the virtual links through the dynamic reconfiguration interface - handling 2 bridge VLANs where the second is supposed to overwrite the first - making sure that the lack of a pvid results in the actual dropping of untagged traffic ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: update existing VLANs from the bridge VLAN listVladimir Oltean
When running this sequence of operations: ip link add br0 type bridge vlan_filtering 1 ip link set swp4 master br0 bridge vlan add dev swp4 vid 1 We observe the traffic sent on swp4 is still untagged, even though the bridge has overwritten the existing VLAN entry: port vlan ids swp4 1 PVID br0 1 PVID Egress Untagged This happens because we didn't consider that the 'bridge vlan add' command just overwrites VLANs like it's nothing. We treat the 'vid 1 pvid untagged' and the 'vid 1' as two separate VLANs, and the first still has precedence when calling sja1105_build_vlan_table. Obviously there is a disagreement regarding semantics, and we end up doing something unexpected from the PoV of the bridge. Let's actually consider an "existing VLAN" to be one which is on the same port, and has the same VLAN ID, as one we already have, and update it if it has different flags than we do. The first blamed commit is the one introducing the bug, the second one is the latest on top of which the bugfix still applies. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Fixes: 5899ee367ab3 ("net: dsa: tag_8021q: add a context structure") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: use 4095 as the private VLAN for untagged trafficVladimir Oltean
One thing became visible when writing the blamed commit, and that was that STP and PTP frames injected by net/dsa/tag_sja1105.c using the deferred xmit mechanism are always classified to the pvid of the CPU port, regardless of whatever VLAN there might be in these packets. So a decision needed to be taken regarding the mechanism through which we should ensure that delivery of STP and PTP traffic is possible when we are in a VLAN awareness mode that involves tag_8021q. This is because tag_8021q is not concerned with managing the pvid of the CPU port, since as far as tag_8021q is concerned, no traffic should be sent as untagged from the CPU port. So we end up not actually having a pvid on the CPU port if we only listen to tag_8021q, and unless we do something about it. The decision taken at the time was to keep VLAN 1 in the list of priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures that STP and PTP frames can always be sent to the outside world. However there is a problem. If we do the following while we are in the best_effort_vlan_filtering=true mode: ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan del dev swp2 vid 1 Then untagged and pvid-tagged frames should be dropped. But we observe that they aren't, and this is because of the precaution we took that VID 1 is always installed on all ports. So clearly VLAN 1 is not good for this purpose. What about VLAN 0? Well, VLAN 0 is managed by the 8021q module, and that module wants to ensure that 802.1p tagged frames are always received by a port, and are always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our STP and PTP frames to be untagged if the stack sent them as untagged - we don't want the driver to just decide out of the blue that it adds VID 0 to some packets. So what to do? Well, there is one other VLAN that is reserved, and that is 4095: $ ip link add link swp2 name swp2.4095 type vlan id 4095 Error: 8021q: Invalid VLAN id. $ bridge vlan add dev swp2 vid 4095 Error: bridge: Vlan id is invalid. After we made this change, VLAN 1 is indeed forwarded and/or dropped according to the bridge VLAN table, there are no further alterations done by the sja1105 driver. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: dsa: sja1105: error out on unsupported PHY modeVladimir Oltean
The driver continues probing when a port is configured for an unsupported PHY interface type, instead it should stop. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 22:16:22 +0000