| Age | Commit message (Collapse) | Author |
|---|
|
The AM62x and AM62Px SoCs feature 2 OLDI TXes each, which makes it
possible to connect them in dual-link or cloned single-link OLDI display
modes. The current OLDI support in tidss_dispc.c can only support for
a single OLDI TX, connected to a VP and doesn't really support
configuration of OLDIs in the other modes. The current OLDI support in
tidss_dispc.c also works on the principle that the OLDI output can only
be served by one, and only one, DSS video-port. This isn't the case in
the AM62Px SoC, where there are 2 DSS controllers present that share the
OLDI TXes.
Having their own devicetree and their own bridge entity will help
support the various display modes and sharing possiblilities of the OLDI
hardware.
For all these reasons, add support for the OLDI TXes as DRM bridges.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Michael Walle <mwalle@kernel.org> # on am67a
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250528122544.817829-5-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The dss dt schema and the tidss driver have kept the single-link OLDI in
AM65x integrated with the parent video-port (VP) from DSS (as the OLDI
configuration happens from the source VP only).
To help configure the dual-lvds modes that the OLDI has to offer in
devices AM62x and later, a new OLDI bridge driver will be introduced.
Mark the existing OLDI code separately by renaming all the current OLDI
identifiers with the 'AM65X_' prefix in tidss driver, to help
distinguish from the upcoming OLDI bridge driver.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250528122544.817829-4-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The OLDI transmitters (TXes) do not have registers of their own, and are
dependent on the source video-ports (VPs) from the DSS to provide
configuration data. This hardware doesn't directly sit on the internal
bus of the SoC, but does so via the DSS. Hence, the OLDI TXes are
supposed to be child nodes under the DSS, and not independent devices.
Two of the OLDI TXes can function in tandem to output dual-link OLDI
output, or cloned single-link outputs. In these cases, one OLDI will be
the primary OLDI, and the other one, a companion. The following diagram
represents such a configuration.
+-----+-----+ +-------+
| | | | |
| | VP1 +----+--->+ OLDI0 | (Primary - may need companion)
| | | | | |
| DSS +-----+ | +-------+
| | | |
| | VP2 | | +-------+
| | | | | |
+-----+-----+ +--->+ OLDI1 | (Companion OLDI)
| |
+-------+
The DSS in AM625 SoC has a configuration like the one above. The AM625
DSS VP1 (port@0) can connect and control 2 OLDI TXes, to use them in
dual-link or cloned single-link OLDI modes. It is only the VP1 that can
connect to either OLDI TXes for the AM625 DSS, and not the VP2.
Alternatively, on some future TI SoCs, along with the above
configuration, the OLDI TX can _also_ connect to separate video sources,
making them work entirely independent of each other. In this case,
neither of the OLDIs are "companion" or "secondary" OLDIs, and nor do
they require one. They both are independent and primary OLDIs. The
following diagram represents such a configuration.
+-----+-----+ +-------+
| | | | |
| | VP1 +--+----------->+ OLDI0 | (Primary - may need companion)
| | | | | |
| +-----+ | +-------+
| | | |
| | VP2 | |
| | | |
| DSS +-----+ | +---+ +-------+
| | | +-->+ M | | |
| | VP3 +----->+ U +--->+ OLDI1 | (Companion or Primary)
| | | | X | | |
| +-----+ +---+ +-------+
| | |
| | VP4 |
| | |
+-----+-----+
Note that depending on the mux configuration, the OLDIs can either be
working together in tandem - sourced by VP1, OR, they could be working
independently sourced by VP1 and VP3 respectively.
The idea is to support all the configurations with this OLDI TX schema.
The OLDI functionality is further supported by a system-control module,
which contains a few registers to control OLDI IO power and other
electrical characteristics of the IO lanes.
Add devicetree binding schema for the OLDI TXes to support various
configurations, and extend their support to the AM625 DSS.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250528122544.817829-3-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Reduce tab size from 8 spaces to 4 spaces to make the bindings
consistent, and easy to expand.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250528122544.817829-2-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Create a new unordered workqueue to be used by the display code
instead of relying on the i915 one. Then move all the unordered works
used in the display code to use this new queue.
Since this is an unordered workqueue, by definition there can't be any
order dependency with non-display works, so no extra care is needed
in regard to that.
This is part of the effort to isolate the display code from i915.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250620091632.1256135-1-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
With all the code touching struct intel_cdclk_state moved inside
intel_cdclk.c, we move the struct definition there too, and make the
type opaque. This nicely reduces includes from intel_cdclk.h.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/2b58c52e8cbcb66a48ecd4a1453e49dc7bd66289.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
intel_cdclk_actual_voltage_level()
Add intel_cdclk_actual() and intel_cdclk_actual_voltage_level() helpers
to avoid looking at struct intel_cdclk_state internals outside of
intel_cdclk.c.
v2: Better location (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/241a9b80a8262b82fded54707ca5622af215dd86.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_cdclk_read_hw() function to avoid looking at struct
intel_cdclk_state internals outside of intel_cdclk.c.
intel_cdclk_init_hw() would be a better name, but we already have that.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/ef720d37bfeee933d59b64e382dc976f3c9fade1.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_cdclk_force_min_cdclk() helper to avoid modifying struct
intel_cdclk_state internals outside of intel_cdclk.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/0bf8a94a1a7d3ac564406ba427d12c4c8eefb5bb.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_cdclk_pmdemand_needs_update() helper to avoid looking at
struct intel_cdclk_state internals outside of intel_cdclk.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/d0d4f073707a2badb432187f6e02d6d7f9fe431b.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_cdclk_bw_min_cdclk() helper to avoid looking at struct
intel_cdclk_state internals outside of intel_cdclk.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/d07499174ebe55fa8fb98d4cb5ff541b6f5ec95b.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_cdclk_min_cdclk() helper to avoid looking at struct
intel_cdclk_state internals outside of intel_cdclk.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/af768e7fc32d8fa8ddcbbe2683266c30ae3b925d.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_cdclk_logical() helper to avoid looking at struct
intel_cdclk_state internals outside of intel_cdclk.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/e965667550e82307341d6abbeedc67b93cae9fc6.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With all the code touching struct intel_bw_state moved inside
intel_bw.c, we move the struct definition there too, and make the type
opaque. to_intel_bw_state() needs to be turned into a proper
function. All of this nicely reduces includes from intel_bw.h.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/743ba67e4e3c5dac4f5e58ab4d2357edea601d09.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_bw_qgv_point_peakbw() helper to avoid looking at struct
intel_bw_state internals outside of intel_bw.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/49a723e0f23e06a6045f8f9e0d06648a6bc899c7.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer only looking at struct intel_bw_state internals inside
intel_bw.c. To that effect, move icl_sagv_{pre,post}_plane_update()
there.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/dedcbeb3389ecd50195aa37de75e9992fae5d197.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
intel_bw_can_enable_sagv()
Prefer only looking at struct intel_bw_state internals inside
intel_bw.c. To that effect, move intel_can_enable_sagv() there, and
rename to intel_bw_can_enable_sagv() to have consistent naming.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/dd6e3857bd1343c07a36826e99c1c04f7dd5ddb5.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_bw_pmdemand_needs_update() helper to avoid looking at struct
intel_bw_state internals outside of intel_bw.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/163fda39da2e1cf0f0c4fcb9c71103c98863179e.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With all the code touching struct intel_dbuf_state moved inside
skl_watermark.c, we move the struct definition there too, and make the
type opaque. This nicely reduces includes from skl_watermark.h.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/83ae5f022a1d6d83c031e5c079b04dc739102565.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_dbuf_num_enabled_slices() and intel_dbuf_num_active_pipes()
helpers to avoid looking at struct intel_dbuf_state internals outside of
skl_watermark.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/7d555e7b4e93632b732b8b5a3cd4076baf781bee.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel_dbuf_pmdemand_needs_update() helper to avoid looking at struct
intel_dbuf_state internals outside of skl_watermark.c.
With this, we can also move to_intel_dbuf_state(),
intel_atomic_get_old_dbuf_state(), and intel_atomic_get_new_dbuf_state()
inside skl_watermark.c.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/b493f259d0d3db047151fee18d7e801ad469fa88.1750847509.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
DISPLAY_PLANE_FLIP_PENDING() has been unused since commit fd3a40242e87
("drm/i915: Rip out legacy page_flip completion/irq handling"). Remove.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250625132140.1564473-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
While doing voltage swing for type-c phy
for DP 1.62 and HDMI write the
LOADGEN_SHARING_PMD_DISABLE bit to 1.
-v2: Update commit.
Add bspec[Suraj]
-v3: Move w/a before DKL_TX_PMD_LANE_SUS.
Use DKL_TX_DPCNTL2[Ville]
-v4: Use intel_encoder_is_dp and
intel_encoder_is_hdmi. [Suraj]
Bspec: 55359
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250625074911.194085-1-nemesa.garg@intel.com
|
|
Allocate and register drm_panel to allow the panel_follower framework to
detect the eDP panel and pass drm_connector::kdev device to drm_panel
allocation for matching.
Call drm_panel_prepare/unprepare in ddi_enable for eDP to allow the
followers to get notified of the panel power state changes.
Note: This is for eDP with DDI platforms only.
v2: remove backlight setup from panel_register (Jani)
v3: Updated the commit message (Jani)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250624-edp_panel-v3-1-e8197b6d9fde@intel.com
|
|
The local variable dev points to drm->dev already, use dev directly.
Link: https://lore.kernel.org/r/20250409103344.3661603-1-sakari.ailus@linux.intel.com
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
When a user closes an exec queue or interrupts an app with Ctrl-C,
this does not warrant wedging the device in mode 2.
Avoid this by skipping the wedge check for killed exec queues in
the TDR and LR exec queue cleanup worker.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250624174103.2707941-1-matthew.brost@intel.com
|
|
This reverts commit 3972872e459d812ab5e481a231a6066cf4f4d0f4.
There are several things wrong with the way this WA was implemented:
- The KLV is only supported on GuC 70.47.0 or newer, so we shouldn't
apply it unconditionally.
- The KLV requires 2 DWs of data, which are not currently provided.
The GuC currently ignores any unknown KLVs, so on versions older that
70.47.0 nothing happens. However, starting on 70.47.0 the GuC attempts
to parse the KLV and fails due to the missing data, causing a GuC load
abort.
Given that 70.47.0 is the first GuC version approved for public release
for PTL, let's revert this patch so it doesn't cause the GuC load to
fail with that blob. We can then re-apply it properly fixed after the
GuC definition is merged, which will also have the added benefit of
running the KLV addition through CI with the right GuC version.
Fixes: 3972872e459d ("drm/xe/ptl: Apply Wa_16026007364")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: sanirban <sk.anirban@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250625001202.1616606-2-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Commit 37d078e51b4c ("drm/xe/uapi: Split xe_sync types from flags") renamed some DRM_XE_SYNC_*
defines but later commits kept using the old names. Correct them with the new definition.
v2: correct fixes tag and update commit message to explain why (Lucas)
Fixes: 9329f0667215 ("drm/xe/uapi: Use LR abbrev for long-running vms")
Fixes: 4b437893a826 ("drm/xe/uapi: More uAPI documentation additions and cosmetic updates")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Francois Dugast <francois.dugast@intel.com>
Cc: Zongyao Bai <zongyao.bai@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250608230133.1250849-1-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The igt_vma_pin1() function has a rather high stack usage, which gets
in the way of reducing the default warning limit:
In file included from drivers/gpu/drm/i915/i915_vma.c:2285:
drivers/gpu/drm/i915/selftests/i915_vma.c:257:12: error: stack frame size (1288) exceeds limit (1280) in 'igt_vma_pin1' [-Werror,-Wframe-larger-than]
There are two things going on here:
- The on-stack modes[] array is really large itself and gets constructed
for every call, using around 1000 bytes itself depending on the configuration.
- The call to i915_vma_pin() gets inlined and adds another 200 bytes for
the i915_gem_ww_ctx structure since commit 7d1c2618eac5 ("drm/i915: Take
reservation lock around i915_vma_pin.")
The second one is easy enough to change, by moving the function into the
appropriate .c file. Since it is already large enough to not always be
inlined, this seems like a good idea regardless, reducing both the code size
and the internal stack usage of each of its 67 callers.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620113644.3844552-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: 686d773186bf ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77ff7 ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When KMSAN is enabled, this function causes has a rather excessive stack usage:
drivers/gpu/drm/i915/display/skl_watermark.c:2977:1: error: stack frame size (1432) exceeds limit (1408) in 'skl_compute_wm' [-Werror,-Wframe-larger-than]
This is apparently all caused by the varargs calls to drm_dbg_kms(). Inlining
this into skl_compute_wm() means that any function called by skl_compute_wm()
has its own stack on top of that.
Move the worst bit into a separate function marked as noinline_for_stack to
limit that to the one code path that actually needs it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620113748.3869160-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
During driver probe we might be briefly using CT safe mode, which
is based on a delayed work, but usually we are able to stop this
once we have IRQ fully operational. However, if we abort the probe
quite early then during unwind we might try to destroy the workqueue
while there is still a pending delayed work that attempts to restart
itself which triggers a WARN.
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] ------------[ cut here ]------------
[ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq
[ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710
[ ] RIP: 0010:__queue_work+0x287/0x710
[ ] Call Trace:
[ ] delayed_work_timer_fn+0x19/0x30
[ ] call_timer_fn+0xa1/0x2a0
Exit the CT safe mode on unwind to avoid that warning.
Fixes: 09b286950f29 ("drm/xe/guc: Allow CTB G2H processing without G2H IRQ")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-3-michal.wajdeczko@intel.com
|
|
While we are indirectly draining our dedicated workqueue ggtt->wq
that we use to complete asynchronous removal of some GGTT nodes,
this happends as part of the managed-drm unwinding (ggtt_fini_early),
which could be later then manage-device unwinding, where we could
already unmap our MMIO/GMS mapping (mmio_fini).
This was recently observed during unsuccessful VF initialization:
[ ] xe 0000:00:02.1: probe with driver xe failed with error -62
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes)
[ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes)
[ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes)
and this was leading to:
[ ] BUG: unable to handle page fault for address: ffffc900058162a0
[ ] #PF: supervisor write access in kernel mode
[ ] #PF: error_code(0x0002) - not-present page
[ ] Oops: Oops: 0002 [#1] SMP NOPTI
[ ] Tainted: [W]=WARN
[ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe]
[ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] xe_ggtt_clear+0xb0/0x270 [xe]
[ ] ggtt_node_remove+0xbb/0x120 [xe]
[ ] ggtt_node_remove_work_func+0x30/0x50 [xe]
[ ] process_one_work+0x22b/0x6f0
[ ] worker_thread+0x1e8/0x3d
Add managed-device action that will explicitly drain the workqueue
with all pending node removals prior to releasing MMIO/GSM mapping.
Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250612220937.857-2-michal.wajdeczko@intel.com
|
|
Only need the flush for DPT host updates here. Normal GGTT updates don't
need special flush.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Flushing l2 is only needed after all data has been written.
Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Limit GT max frequency to 2600MHz and wait for frequency to reduce
before proceeding with a transient flush. This is really only needed for
the transient flush: if L2 flush is needed due to 16023588340 then
there's no need to do this additional wait since we are already using
the bigger hammer.
v2: Use generic names, ensure user set max frequency requests wait
for flush to complete (Rodrigo)
v3:
- User requests wait via wait_var_event_timeout (Lucas)
- Close races on flush + user requests (Lucas)
- Fix xe_guc_pc_remove_flush_freq_limit() being called on last gt
rather than root gt (Lucas)
v4:
- Only apply the freq reducing part if a TDF is needed: L2 flush trumps
the need for waiting a lower frequency
Fixes: aaa08078e725 ("drm/xe/bmg: Apply Wa_22019338487")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-4-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_device_td_flush() has 2 possible implementations: an entire L2 flush
or a transient flush, depending on WA 16023588340. Make this clear by
splitting the function so it calls each of them.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-3-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
pc_set_mert_freq_cap() currently lock()/unlock() the mutex multiple times
to stash the current frequencies. It's not a problem since
xe_guc_pc_restore_stashed_freq() is guaranteed to be called only later
in the init sequence. However, now that we have _locked() variants for
this functions, use them and avoid potential issues when called from
other places or using the same pattern.
While at it, prefer and early return for the WA check to reduce
indentation.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-2-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
There are places in which the getters/setters are called one after the
other causing a multiple lock()/unlock(). These are not currently a
problem since they are all happening from the same thread, but there's a
race possibility as calls are added outside of the early init when the
max/min and stashed values need to be correlated.
Add the _locked() variants to prepare for that.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250618-wa-22019338487-v5-1-b888388477f2@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
When EDID is retrieved via drm_edid_raw(), it doesn't guarantee to
return proper EDID bytes the caller wants: it may be either NULL (that
leads to an Oops) or with too long bytes over the fixed size raw_edid
array (that may lead to memory corruption). The latter was reported
actually when connected with a bad adapter.
Add sanity checks for drm_edid_raw() to address the above corner
cases, and return EDID_BAD_INPUT accordingly.
Fixes: 48edb2a4256e ("drm/amd/display: switch amdgpu_dm_connector to use struct drm_edid")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1236415
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
revise the pcie dpm parameters
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Brightness programming may involve a conversion of a user requested
brightness against what was in a custom brightness curve. The values
might not match what a user programmed.
[How]
Add a new trace event to show specific converted brightness values.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-2-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
commit 16dc8bc27c2a ("drm/amd/display: Export full brightness range to
userspace") adjusted the brightness range to scale to larger values, but
missed updating AMDGPU_MAX_BL_LEVEL which is needed to make sure that
scaling works properly with custom brightness curves.
[How]
As the change for max brightness of 0xFFFF only applies to devices
supporting DC, use existing DC define MAX_BACKLIGHT_LEVEL.
Fixes: 16dc8bc27c2a ("drm/amd/display: Export full brightness range to userspace")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250623171114.1156451-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a spelling mistake in a pr_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA 7.0.0/1: 7836028
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA 6.0.0 version 24
SDMA 6.0.2 version 21
SDMA 6.0.3 version 25
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of checking the response flag, use status mask also to check
against any unexpected failures like a device drop. Also, log error if
waiting on a psp response fails/times out.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
They can be shared across multiple products
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is not necessary to be ip generation specific
v2: rename the helper to is_multi_aid (Lijo)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The query_memory_partition does not need to remain
as soc specific callbacks. They can be shared across
multiple products
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
