summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-12net: ethernet: Add helper for MACs which support asym pauseAndrew Lunn
Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper to remove a supported link modeAndrew Lunn
Some MAC hardware cannot support a subset of link modes. e.g. often 1Gbps Full duplex is supported, but Half duplex is not. Add a helper to remove such a link mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Fix up drivers masking pause supportAndrew Lunn
PHY drivers don't indicate they support pause. They expect MAC drivers to enable its support if the MAC has the needed hardware. Thus MAC drivers should not mask Pause support, but enable it. Change a few ANDs to ORs. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: bcmgenet: Fix speed selection for reverse MIIAndrew Lunn
The phy supported speed is being used to determine if the MAC should be configured to 100 or 1G. The masking logic is broken. Instead, look at 1G supported speeds to enable 1G MAC support. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Use phy_set_max_speed() to limit advertised speedAndrew Lunn
Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: phy: bcm63xx: Allow to be built with COMPILE_TESTAndrew Lunn
There is nothing in this driver which prevents it to be compiled for other architectures. Add COMPILE_TEST so we get better compile test coverage. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: phy: et1011c: Remove incorrect missing 1000 HalfAndrew Lunn
The driver indicates it can do 10/100 full and half duplex, plus 1G Full. The datasheet indicates 1G half is also supported. So make use of the standard PHY_GBIT_FEATURES. It could be, this was added because there is a MAC which does not support 1G half. Bit this is the wrong place to enforce this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: phy: ste10Xp: Remove wrong SUPPORTED_PauseAndrew Lunn
The PHY driver should not indicate that Pause is supported. It is upto the MAC drive enable it, if it supports Pause frames. So remove it from the ste10Xp driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13drm/nouveau/devinit: fix warning when PMU/PRE_OS is missingBen Skeggs
Messed up when sending pull request and sent an outdated version of previous patch, this fixes it up to remove warnings. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-09-12null_blk: fix zoned support for non-rq based operationJens Axboe
The supported added for zones in null_blk seem to assume that only rq based operation is possible. But this depends on the queue_mode setting, if this is set to 0, then cmd->bio is what we need to be operating on. Right now any attempt to load null_blk with queue_mode=0 will insta-crash, since cmd->rq is NULL and null_handle_cmd() assumes it to always be set. Make the zoned code deal with bio's instead, or pass in the appropriate sector/nr_sectors instead. Fixes: ca4b2a011948 ("null_blk: add zone support") Tested-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-12cifs: read overflow in is_valid_oplock_break()Dan Carpenter
We need to verify that the "data_offset" is within bounds. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2018-09-12bpf: use __GFP_COMP while allocating pageTushar Dave
Helper bpg_msg_pull_data() can allocate multiple pages while linearizing multiple scatterlist elements into one shared page. However, if the shared page has size > PAGE_SIZE, using copy_page_to_iter() causes below warning. e.g. [ 6367.019832] WARNING: CPU: 2 PID: 7410 at lib/iov_iter.c:825 page_copy_sane.part.8+0x0/0x8 To avoid above warning, use __GFP_COMP while allocating multiple contiguous pages. Fixes: 015632bb30da ("bpf: sk_msg program helper bpf_sk_msg_pull_data") Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12bpf/verifier: disallow pointer subtractionAlexei Starovoitov
Subtraction of pointers was accidentally allowed for unpriv programs by commit 82abbf8d2fc4. Revert that part of commit. Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers") Reported-by: Jann Horn <jannh@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12nfp: report FW vNIC stats in interface statsJakub Kicinski
Report in standard netdev stats drops and errors as well as RX multicast from the FW vNIC counters. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12Merge branch 'nfp-flower-fixes'David S. Miller
Jakub Kicinski says: ==================== nfp: flower: fixes for flower offload Two fixes for flower matching and tunnel encap. Pieter fixes VLAN matching if the entire VLAN id is masked out and match is only performed on the PCP field. Louis adds validation of tunnel flags for encap, most importantly we should not offload actions on IPv6 tunnels if it's not supported. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: flower: reject tunnel encap with ipv6 outer headers for offloadingLouis Peens
This fixes a bug where ipv6 tunnels would report that it is getting offloaded to hardware but would actually be rejected by hardware. Fixes: b27d6a95a70d ("nfp: compile flower vxlan tunnel set actions") Signed-off-by: Louis Peens <louis.peens@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: flower: fix vlan match by checking both vlan id and vlan pcpPieter Jansen van Vuuren
Previously we only checked if the vlan id field is present when trying to match a vlan tag. The vlan id and vlan pcp field should be treated independently. Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12tipc: check return value of __tipc_dump_start()Cong Wang
When __tipc_dump_start() fails with running out of memory, we have no reason to continue, especially we should avoid calling tipc_dump_done(). Fixes: 8f5c5fcf3533 ("tipc: call start and done ops directly in __tipc_nl_compat_dumpit()") Reported-and-tested-by: syzbot+3f8324abccfbf8c74a9f@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12Merge branch 'qeth-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-09-12 please apply the following qeth fixes for -net. Patch 1 resolves a regression in an error path, while patch 2 enables the SG support by default that was newly introduced with 4.19. Patch 3 takes care of a longstanding problem with large-order allocations, and patch 4 fixes a potential out-of-bounds access. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: don't dump past end of unknown HW headerJulian Wiedmann
For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: use vzalloc for QUERY OAT bufferWenjia Zhang
qeth_query_oat_command() currently allocates the kernel buffer for the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with fragmented memory, large allocations may fail (eg. the qethqoat tool by default uses 132KB). Solve this issue by using vzalloc, backing the allocation with non-contiguous memory. Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: switch on SG by default for IQD devicesJulian Wiedmann
Scatter-gather transmit brings a nice performance boost. Considering the rather large MTU sizes at play, it's also totally the Right Thing To Do. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12s390/qeth: indicate error when netdev allocation failsJulian Wiedmann
Bailing out on allocation error is nice, but we also need to tell the ccwgroup core that creating the qeth groupdev failed. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12bpf: btf: Fix end boundary calculation for type sectionMartin KaFai Lau
The end boundary math for type section is incorrect in btf_check_all_metas(). It just happens that hdr->type_off is always 0 for now because there are only two sections (type and string) and string section must be at the end (ensured in btf_parse_str_sec). However, type_off may not be 0 if a new section would be added later. This patch fixes it. Fixes: f80442a4cd18 ("bpf: btf: Change how section is supported in btf_header") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-09-12x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3Guenter Roeck
Commit eeb89e2bb1ac ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()") moved loading the fixmap in efi_call_phys_epilog() after load_cr3() since it was assumed to be more logical. Turns out this is incorrect: In efi_call_phys_prolog(), the gdt with its physical address is loaded first, and when the %cr3 is reloaded in _epilog from initial_page_table to swapper_pg_dir again the gdt is no longer mapped. This results in a triple fault if an interrupt occurs after load_cr3() and before load_fixmap_gdt(0). Calling load_fixmap_gdt(0) first restores the execution order prior to commit eeb89e2bb1ac and fixes the problem. Fixes: eeb89e2bb1ac ("x86/efi: Load fixmap GDT in efi_call_phys_epilog()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: linux-efi@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/1536689892-21538-1-git-send-email-linux@roeck-us.net
2018-09-12x86/xen: Disable CPU0 hotplug for Xen PVJuergen Gross
Xen PV guests don't allow CPU0 hotplug, so disable it. Signed-off-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20180912174122.24282-1-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-12Merge tag 'perf-urgent-for-mingo-4.19-20180912' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix finding a symbol by name when multiple maps use the same backing DSO, so we must first see if that symbol name is in the DSO, then see if it is inside the range of addresses for that specific map (Adrian Hunter) - Update the tools copies of UAPI headers, which silences the warnings emitted when building the tools and in some cases, like for the new KVM ioctls, results in 'perf trace' being able to translate that ioctl number to a string (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-12tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACEPaulo Zanoni
As a Kernel developer, I make heavy use of "make targz-pkg" in order to locally compile and remotely install my development Kernels. The nice feature I rely on is that after a normal "make", "make targz-pkg" only generates the tarball without having to recompile everything. That was true until commit f28bc3c32c05 ("tracing: Handle CC_FLAGS_FTRACE more accurately"). After it, running "make targz-pkg" after "make" will recompile the whole Kernel tree, making my development workflow much slower. The Kernel is choosing to recompile everything because it claims the command line has changed. A diff of the .cmd files show a repeated -mfentry in one of the files. That is because "make targz-pkg" calls "make modules_install" and the environment is already populated with the exported variables, CC_FLAGS_FTRACE being one of them. Then, -mfentry gets duplicated because it is not protected behind an ifndef block, like -pg. To complicate the problem a little bit more, architectures can define their own version CC_FLAGS_FTRACE, so our code not only has to consider recursive Makefiles, but also architecture overrides. So in this patch we move CC_FLAGS_FTRACE up and unconditionally define it to -pg. Then we let the architecture Makefiles possibly override it, and finally append the extra options later. This ensures the variable is always fully redefined at each invocation so recursive Makefiles don't keep appending, and hopefully it maintains the intended behavior on how architectures can override the defaults.. Thanks Steven Rostedt and Vasily Gorbik for the help on this regression. Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: linux-kbuild@vger.kernel.org Fixes: commit f28bc3c32c05 ("tracing: Handle CC_FLAGS_FTRACE more accurately") Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-12Merge tag 'riscv-for-linus-4.19-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fix from Palmer Dabbelt: "This contains what I hope to be the last RISC-V patch for 4.19. It fixes a bug in our initramfs support by removing some broken and obselete code" * tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: riscv: Do not overwrite initrd_start and initrd_end
2018-09-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers (qedi and iscsi target) so no wider impact even if the code changes are a bit extensive" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedi: Add the CRC size within iSCSI NVM image scsi: iscsi: target: Fix conn_ops double free scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails
2018-09-12efi/libstub/arm: default EFI_ARMSTUB_DTB_LOADER to yScott Branden
Default EFI_ARMSTUB_DTB_LOADER to y to allow the dtb= command line parameter to function with efi loader. Required for development purposes and to boot on existing bootloaders that do not support devicetree provided by the firmware or by the bootloader. Fixes: 3d7ee348aa41 ("efi/libstub/arm: Add opt-in Kconfig option ...") Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2018-09-12cifs: integer overflow in in SMB2_ioctl()Dan Carpenter
The "le32_to_cpu(rsp->OutputOffset) + *plen" addition can overflow and wrap around to a smaller value which looks like it would lead to an information leak. Fixes: 4a72dafa19ba ("SMB2 FSCTL and IOCTL worker function") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org>
2018-09-12CIFS: fix wrapping bugs in num_entries()Dan Carpenter
The problem is that "entryptr + next_offset" and "entryptr + len + size" can wrap. I ended up changing the type of "entryptr" because it makes the math easier when we don't have to do so much casting. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org>
2018-09-12cifs: prevent integer overflow in nxt_dir_entry()Dan Carpenter
The "old_entry + le32_to_cpu(pDirInfo->NextEntryOffset)" can wrap around so I have added a check for integer overflow. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2018-09-12drm/fb-helper: Remove set but not used variable 'connector_funcs'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_fb_helper.c: In function 'drm_pick_crtcs': drivers/gpu/drm/drm_fb_helper.c:2373:43: warning: variable 'connector_funcs' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1536722130-108819-1-git-send-email-yuehaibing@huawei.com
2018-09-12KVM: s390: Make huge pages unavailable in ucontrol VMsJanosch Frank
We currently do not notify all gmaps when using gmap_pmdp_xchg(), due to locking constraints. This makes ucontrol VMs, which is the only VM type that creates multiple gmaps, incompatible with huge pages. Also we would need to hold the guest_table_lock of all gmaps that have this vmaddr maped to synchronize access to the pmd. ucontrol VMs are rather exotic and creating a new locking concept is no easy task. Hence we return EINVAL when trying to active KVM_CAP_S390_HPAGE_1M and report it as being not available when checking for it. Fixes: a4499382 ("KVM: s390: Add huge page enablement control") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20180801112508.138159-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2018-09-12s390/mm: Check for valid vma before zapping in gmap_discardJanosch Frank
Userspace could have munmapped the area before doing unmapping from the gmap. This would leave us with a valid vmaddr, but an invalid vma from which we would try to zap memory. Let's check before using the vma. Fixes: 1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20180816082432.78828-1-frankja@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2018-09-12media: staging/media/mt9t031/Kconfig: remove bogus entryHans Verkuil
The 'config SOC_CAMERA_IMX074' is a copy-and-paste error and should be removed. This Kconfig is for mt9t031 only. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-12media: i2c: mt9v111: Fix v4l2-ctrl error handlingJacopo Mondi
Fix error handling of v4l2_ctrl creation by inspecting the ctrl.error flag instead of testing for each returned value correctness. As reported by Dan Carpenter returning PTR_ERR() on the v4l2_ctrl_new_std() return value is also wrong, as that function return NULL on error. While at there re-order the cleanup path to respect the operation inverse order. Fixes: aab7ed1c "media: i2c: Add driver for Aptina MT9V111" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2018-09-12sound: don't call skl_init_chip() to reset intel skl socYu Zhao
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12sound: enable interrupt after dma buffer initializationYu Zhao
In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation"Yu Zhao
This reverts commit 12eeeb4f4733bbc4481d01df35933fc15beb8b19. The patch doesn't fix accessing memory with null pointer in skl_interrupt(). There are two problems: 1) skl_init_chip() is called twice, before and after dma buffer is allocate. The first call sets bus->chip_init which prevents the second from initializing bus->corb.buf and rirb.buf from bus->rb.area. 2) snd_hdac_bus_init_chip() enables interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. There is a small window which skl_interrupt() can be called if irq has been acquired. If so, it crashes when using null dma buffer pointers. Will fix the problems in the following patches. Also attaching the crash for future reference. [ 16.949148] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI <snipped> [ 16.950903] Call Trace: [ 16.950906] <IRQ> [ 16.950918] skl_interrupt+0x19e/0x2d6 [snd_soc_skl] [ 16.950926] ? dma_supported+0xb5/0xb5 [snd_soc_skl] [ 16.950933] __handle_irq_event_percpu+0x27a/0x6c8 [ 16.950937] ? __irq_wake_thread+0x1d1/0x1d1 [ 16.950942] ? __do_softirq+0x57a/0x69e [ 16.950944] handle_irq_event_percpu+0x95/0x1ba [ 16.950948] ? _raw_spin_unlock+0x65/0xdc [ 16.950951] ? __handle_irq_event_percpu+0x6c8/0x6c8 [ 16.950953] ? _raw_spin_unlock+0x65/0xdc [ 16.950957] ? time_cpufreq_notifier+0x483/0x483 [ 16.950959] handle_irq_event+0x89/0x123 [ 16.950962] handle_fasteoi_irq+0x16f/0x425 [ 16.950965] handle_irq+0x1fe/0x28e [ 16.950969] do_IRQ+0x6e/0x12e [ 16.950972] common_interrupt+0x7a/0x7a [ 16.950974] </IRQ> <snipped> [ 16.951031] RIP: snd_hdac_bus_update_rirb+0x19b/0x4cf [snd_hda_core] RSP: ffff88015c807c08 [ 16.951036] ---[ end trace 58bf9ece1775bc92 ]--- Fixes: 2eeeb4f4733b ("ASoC: Intel: Skylake: Acquire irq after RIRB allocation") Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12s390/zcrypt: remove VLA usage from the AP busMartin Schwidefsky
The use of variable length arrays on the stack is deprecated. git commit 3d8f60d38e249f989a7fca9c2370c31c3d5487e1 "s390/zcrypt: hex string mask improvements for apmask and aqmask." added three new VLA arrays. Remove them again. Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-09-12firmware: Fix security issue with request_firmware_into_buf()Rishabh Bhatnagar
When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag it is expected that firmware is loaded into buffer from memory. But inside alloc_lookup_fw_priv every new firmware that is loaded is added to the firmware cache (fwc) list head. So if any driver requests a firmware that is already loaded the code iterates over the above mentioned list and it can end up giving a pointer to other device driver's firmware buffer. Also the existing copy may either be modified by drivers, remote processors or even freed. This causes a potential security issue with batched requests when using request_firmware_into_buf. Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE is set, and also don't do the lookup in the list. Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional") [mcgrof: broken since feature introduction on v4.8] Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12vmbus: don't return values for uninitalized channelsStephen Hemminger
For unsupported device types, the vmbus channel ringbuffer is never initialized, and therefore reading the sysfs files will return garbage or cause a kernel OOPS. Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> # 4.15 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12fpga: dfl: fme: fix return value check in in pr_mgmt_init()Wei Yongjun
In case of error, the function dfl_fme_create_region() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 29de76240e86 ("fpga: dfl: fme: add partial reconfiguration sub feature support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12misc: hmc6352: fix potential Spectre v1Gustavo A. R. Silva
val is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue 'map' [r] Fix this by sanitizing val before using it to index map Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12Tools: hv: Fix a bug in the key delete codeK. Y. Srinivasan
Fix a bug in the key delete code - the num_records range from 0 to num_records-1. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reported-by: David Binderman <dcb314@hotmail.com> Cc: <stable@vger.kernel.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12misc: ibmvsm: Fix wrong assignment of return codeBryant G. Ly
Currently the assignment is flipped and rc is always 0. Signed-off-by: Bryant G. Ly <bryantly@linux.ibm.com> Fixes: 0eca353e7ae7 ("misc: IBM Virtual Management Channel Driver (VMC)") Reviewed-by: Bradley Warrum <bwarrum@us.ibm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-12android: binder: fix the race mmap and alloc_new_buf_lockedMinchan Kim
There is RaceFuzzer report like below because we have no lock to close below the race between binder_mmap and binder_alloc_new_buf_locked. To close the race, let's use memory barrier so that if someone see alloc->vma is not NULL, alloc->vma_vm_mm should be never NULL. (I didn't add stable mark intentionallybecause standard android userspace libraries that interact with binder (libbinder & libhwbinder) prevent the mmap/ioctl race. - from Todd) " Thread interleaving: CPU0 (binder_alloc_mmap_handler) CPU1 (binder_alloc_new_buf_locked) ===== ===== // drivers/android/binder_alloc.c // #L718 (v4.18-rc3) alloc->vma = vma; // drivers/android/binder_alloc.c // #L346 (v4.18-rc3) if (alloc->vma == NULL) { ... // alloc->vma is not NULL at this point return ERR_PTR(-ESRCH); } ... // #L438 binder_update_page_range(alloc, 0, (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr); // In binder_update_page_range() #L218 // But still alloc->vma_vm_mm is NULL here if (need_mm && mmget_not_zero(alloc->vma_vm_mm)) alloc->vma_vm_mm = vma->vm_mm; Crash Log: ================================================================== BUG: KASAN: null-ptr-deref in __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline] BUG: KASAN: null-ptr-deref in atomic_add_unless include/linux/atomic.h:533 [inline] BUG: KASAN: null-ptr-deref in mmget_not_zero include/linux/sched/mm.h:75 [inline] BUG: KASAN: null-ptr-deref in binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218 Write of size 4 at addr 0000000000000058 by task syz-executor0/11184 CPU: 1 PID: 11184 Comm: syz-executor0 Not tainted 4.18.0-rc3 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x16e/0x22c lib/dump_stack.c:113 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x163/0x380 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x140/0x1a0 mm/kasan/kasan.c:267 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278 __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline] atomic_add_unless include/linux/atomic.h:533 [inline] mmget_not_zero include/linux/sched/mm.h:75 [inline] binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218 binder_alloc_new_buf_locked drivers/android/binder_alloc.c:443 [inline] binder_alloc_new_buf+0x467/0xc30 drivers/android/binder_alloc.c:513 binder_transaction+0x125b/0x4fb0 drivers/android/binder.c:2957 binder_thread_write+0xc08/0x2770 drivers/android/binder.c:3528 binder_ioctl_write_read.isra.39+0x24f/0x8e0 drivers/android/binder.c:4456 binder_ioctl+0xa86/0xf34 drivers/android/binder.c:4596 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x154/0xd40 fs/ioctl.c:686 ksys_ioctl+0x94/0xb0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:706 do_syscall_64+0x167/0x4b0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe " Signed-off-by: Todd Kjos <tkjos@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Martijn Coenen <maco@android.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 02:19:19 +0000