summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-22crypto: sun4i-ss - remove dependency on not 64BITCorentin Labbe
The driver now compile without warnings on 64bits, we can remove the !64BIT condition. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.cCorentin Labbe
If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings on sun4i-ss-hash.c. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22MAINTAINERS: Add maintainer for HiSilicon SEC V2 driverZaibo Xu
Here adds maintainer information for security engine driver. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add DebugFS for HiSilicon SECZaibo Xu
The HiSilicon SEC engine driver uses DebugFS to provide main debug information for user space. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22Documentation: add DebugFS doc for HiSilicon SECLongfang Liu
This Documentation is for HiSilicon SEC DebugFS. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add SRIOV for HiSilicon SECZaibo Xu
HiSilicon SEC engine supports PCI SRIOV. This patch enable this feature. User can enable VFs and pass through them to VM, same SEC driver can work in VM to provide skcipher algorithms. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: hisilicon - add HiSilicon SEC V2 driverZaibo Xu
SEC driver provides PCIe hardware device initiation with AES, SM4, and 3DES skcipher algorithms registered to Crypto. It uses Hisilicon QM as interface to CPU. Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: atmel - Fix build error of CRYPTO_AUTHENCYueHaibing
If CRYPTO_DEV_ATMEL_AUTHENC is m, CRYPTO_DEV_ATMEL_SHA is m, but CRYPTO_DEV_ATMEL_AES is y, building will fail: drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_init_tfm': atmel-aes.c:(.text+0x670): undefined reference to `atmel_sha_authenc_get_reqsize' atmel-aes.c:(.text+0x67a): undefined reference to `atmel_sha_authenc_spawn' drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey': atmel-aes.c:(.text+0x7e5): undefined reference to `atmel_sha_authenc_setkey' Make CRYPTO_DEV_ATMEL_AUTHENC depend on CRYPTO_DEV_ATMEL_AES, and select CRYPTO_DEV_ATMEL_SHA and CRYPTO_AUTHENC for it under there. Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Fixes: 89a82ef87e01 ("crypto: atmel-authenc - add support to...") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: qce/dma - Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: ccp - add SEV command privilege separationBrijesh Singh
Currently, there is no privilege separation of the SEV command; you can run them all or none of them. This is less than ideal because it means that a compromise of the code which launches VMs could make permanent change to the SEV certifcate chain which will affect others. These commands are required to attest the VM environment: - SEV_PDH_CERT_EXPORT - SEV_PLATFORM_STATUS - SEV_GET_{ID,ID2} These commands manage the SEV certificate chain: - SEV_PEK_CERR_IMPORT - SEV_FACTORY_RESET - SEV_PEK_GEN - SEV_PEK_CSR - SEV_PDH_GEN Lets add the CAP_SYS_ADMIN check for the group of the commands which alters the SEV certificate chain to provide some level of privilege separation. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Gary Hook <gary.hook@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: Tom Lendacky <Thomas.Lendacky@amd.com> Tested-by: David Rientjes <rientjes@google.com> Co-developed-by: David Rientjes <rientjes@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - rename tfm context and _setkey callbackDavid Sterba
The TFM context can be renamed to a more appropriate name and the local varaibles as well, using 'tctx' which seems to be more common than 'mctx'. The _setkey callback was the last one without the blake2b_ prefix, rename that too. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge _update to api callbackDavid Sterba
Now that there's only one call to blake2b_update, we can merge it to the callback and simplify. The empty input check is split and the rest of code un-indented. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - open code set last block helperDavid Sterba
The helper is trival and called once, inlining makes things simpler. There's a comment to tie it back to the idea behind the code. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - delete unused structs or membersDavid Sterba
All the code for param block has been inlined, last_node and outlen from the state are not used or have become redundant due to other code. Remove it. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - simplify key initDavid Sterba
The keyed init writes the key bytes to the input buffer and does an update. We can do that in two ways: fill the buffer and update immediatelly. This is what current blake2b_init_key does. Any other following _update or _final will continue from the updated state. The other way is to write the key and set the number of bytes to process at the next _update or _final, lazy evaluation. Which leads to the the simplified code in this patch. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge blake2 init to api callbackDavid Sterba
The call chain from blake2b_init can be simplified because the param block is effectively zeros, besides the key. - blake2b_init0 zeroes state and sets IV - blake2b_init sets up param block with defaults (key and some 1s) - init with key, write it to the input buffer and recalculate state So the compact way is to zero out the state and initialize index 0 of the state directly with the non-zero values and the key. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: blake2b - merge _final implementation to callbackDavid Sterba
blake2b_final is called only once, merge it to the crypto API callback and simplify. This avoids the temporary buffer and swaps the bytes of internal buffer. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun8i-ce - Fix memdup.cocci warningsYueHaibing
Use kmemdup rather than duplicating its implementation Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22crypto: sun4i-ss - Fix 64-bit size_t warningsHerbert Xu
If you try to compile this driver on a 64-bit platform then you will get warnings because it mixes size_t with unsigned int which only works on 32-bit. This patch fixes all of the warnings. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-11-22staging: vchiq: Have vchiq_dump_* functions return an error codeMarcelo Diop-Gonzalez
These functions currently modify the struct dump_context passed to them, and set context->actual to -EFAULT in case of error. The issue is that this is never returned to the user (except accidentally when things align so that that happens). So, have these functions return 0 on success and the appropriate error code otherwise, and return nonzero errors to the user. Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20191120202102.249121-5-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: vchiq: Refactor indentation in vchiq_dump_* functionsMarcelo Diop-Gonzalez
Doing this helps with readability, and makes the logic easier to follow. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20191120202102.249121-4-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22of: property: Add device link support for interrupt-parent, dmas and -gpio(s)Saravana Kannan
Add support for creating device links out of more DT properties. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191120071302.227777-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: fwserial: Fix Kconfig indentation (seven spaces)Krzysztof Kozlowski
Adjust indentation from seven spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132851.29072-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: vchiq_dump: Replace min with min_tMarcelo Diop-Gonzalez
Replacing this fixes checkpatch warnings. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Link: https://lore.kernel.org/r/20191120202102.249121-3-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: vchiq: Fix block comment format in vchiq_dump()Marcelo Diop-Gonzalez
This fixes a checkpatch warning. Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com> Link: https://lore.kernel.org/r/20191120202102.249121-2-marcgonzalez@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: octeon: indent with tabs instead of spacesGiovanni Gherdovich
Remove a coding style error from the Octeon driver's tree and keep checkpatch.pl a little quieter. Being a white-spaces patch the chances of breakage are minimal; we don't have the hardware to run this driver so we built it with COMPILE_TEST enabled on an x86 machine. Signed-off-by: Giovanni Gherdovich <bobdc9664@seznam.cz> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20191118183852.3699-1-bobdc9664@seznam.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding errorBernd Porr
The userspace comedilib function 'get_cmd_generic_timed' fills the cmd structure with an informed guess and then calls the function 'usbduxfast_ai_cmdtest' in this driver repeatedly while 'usbduxfast_ai_cmdtest' is modifying the cmd struct until it no longer changes. However, because of rounding errors this never converged because 'steps = (cmd->convert_arg * 30) / 1000' and then back to 'cmd->convert_arg = (steps * 1000) / 30' won't be the same because of rounding errors. 'Steps' should only be converted back to the 'convert_arg' if 'steps' has actually been modified. In addition the case of steps being 0 wasn't checked which is also now done. Signed-off-by: Bernd Porr <mail@berndporr.me.uk> Cc: <stable@vger.kernel.org> # 4.4+ Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191118230759.1727-1-mail@berndporr.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-22Bluetooth: Fix memory leak in hci_connect_le_scanNavid Emamdoost
In the implementation of hci_connect_le_scan() when conn is added via hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated memory for conn is leaked. Use hci_conn_del() to release it. Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-22EDAC/altera: Use the Altera System Manager driverThor Thayer
Simplify by using the Altera System Manager driver that abstracts the differences between ARM32 and ARM64. Also allows the removal of the Arria10 test function since this is handled by the System Manager driver. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Meng.Li@windriver.com Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1574361048-17572-4-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/altera: Cleanup the ECC ManagerThor Thayer
Cleanup the ECC Manager peripheral test in probe function as suggested by James. Remove the check for Stratix10. Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1573156890-26891-2-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/altera: Use fast register IO for S10 IRQsMeng Li
When an IRQ occurs, regmap_{read,write,...}() is invoked in atomic context. Regmap must indicate register IO is fast so that a spinlock is used instead of a mutex to avoid sleeping in atomic context: lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_write a10_eccmgr_irq_unmask unmask_irq.part.0 irq_enable __irq_startup irq_startup __setup_irq request_threaded_irq devm_request_threaded_irq altr_sdram_probe Mark it so. [ bp: Massage. ] Fixes: 3dab6bd52687 ("EDAC, altera: Add support for Stratix10 SDRAM EDAC") Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: stable <stable@vger.kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1574361048-17572-2-git-send-email-thor.thayer@linux.intel.com
2019-11-22EDAC/ghes: Do not warn when incrementing refcount on 0Robert Richter
The following warning from the refcount framework is seen during ghes initialization: EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) ------------[ cut here ]------------ refcount_t: increment on 0; use-after-free. WARNING: CPU: 36 PID: 1 at lib/refcount.c:156 refcount_inc_checked [...] Call trace: refcount_inc_checked ghes_edac_register ghes_probe ... It warns if the refcount is incremented from zero. This warning is reasonable as a kernel object is typically created with a refcount of one and freed once the refcount is zero. Afterwards the object would be "used-after-free". For GHES, the refcount is initialized with zero, and that is why this message is seen when initializing the first instance. However, whenever the refcount is zero, the device will be allocated and registered. Since the ghes_reg_mutex protects the refcount and serializes allocation and freeing of ghes devices, a use-after-free cannot happen here. Instead of using refcount_inc() for the first instance, use refcount_set(). This can be used here because the refcount is zero at this point and can not change due to its protection by the mutex. Fixes: 23f61b9fc5cc ("EDAC/ghes: Fix locking and memory barrier issues") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <huangming23@huawei.com> Cc: James Morse <james.morse@arm.com> Cc: <linuxarm@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <tanxiaofei@huawei.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <wanghuiqiang@huawei.com> Link: https://lkml.kernel.org/r/20191121213628.21244-1-rrichter@marvell.com
2019-11-22Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirksMarcel Holtmann
When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it results in an unconfigured controller even if the bootloader provides a valid address. Fix this by allowing a bootloader provided address to mark the controller as configured. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-22dt-bindings: mmc: Correct the type of the clk phase propertiesManish Narani
The clock phase properties are having two uint32 values. The minItems and maxItems are set to 2 for the same. So the property type should be 'uint32-array' and not 'uint32'. Modify it to correct the same. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-22ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port dataGeoffrey D. Bennett
The s6i6_gen2_info.ports[] array had the Mixer and PCM port type entries in the wrong place. Use designators to explicitly specify the array elements being set. Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface") Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Tested-by: Alex Fellows <alex.fellows@gmail.com> Tested-by: Markus Schroetter <project.m.schroetter@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191110134356.GA31589@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-22pcmcia: remove unused dprintk definitionDominik Brodowski
A recent cleanup patch removed the remaining users of dprintk() in i82092.c, so get rid of the definition of dprintk() as well. Fixes: 836e9494f448 ("pcmcia/i82092: Refactored dprintk macro for dev_dbg().") Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-22pcmcia: include <pcmcia/ds.h> for pcmcia_parse_tupleBen Dooks (Codethink)
Include <pcmcia/ds.h> for pcmcia_parse_tuple declaration to fix the following sparse warning: drivers/pcmcia/cistpl.c:1287:5: warning: symbol 'pcmcia_parse_tuple' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-22pcmcia: include cs_internal.h for missing declarationsBen Dooks (Codethink)
Include cs_internal.h (and pcmcia/cistpl.h as required by cs_internal.h) for the declearions of cb_alloc and cb_free to silence the following sparse warnings: drivers/pcmcia/cardbus.c:64:11: warning: symbol 'cb_alloc' was not declared. Should it be static? drivers/pcmcia/cardbus.c:103:6: warning: symbol 'cb_free' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-11-21hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.Eric Tremblay
TI's TMP512/513 are I2C/SMBus system monitor chips. These chips monitor the supply voltage, supply current, power consumption and provide one local and up to three (TMP513) remote temperature sensors. It has been tested using a TI TMP513 development kit (TMP513EVM) Signed-off-by: Eric Tremblay <etremblay@distech-controls.com> Link: https://lore.kernel.org/r/20191112223001.20844-3-etremblay@distech-controls.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-11-21dt-bindings: hwmon: Add TMP512/513Eric Tremblay
Document the TMP513/512 device devicetree bindings Signed-off-by: Eric Tremblay <etremblay@distech-controls.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191112223001.20844-2-etremblay@distech-controls.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-11-21Merge branch 'hv_netvsc-Fix-send-indirection-table-offset'David S. Miller
Haiyang Zhang says: ==================== hv_netvsc: Fix send indirection table offset Fix send indirection table offset issues related to guest and host bugs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21hv_netvsc: Fix send_table offset in case of a host bugHaiyang Zhang
If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21hv_netvsc: Fix offset usage in netvsc_send_table()Haiyang Zhang
To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21enetc: make enetc_setup_tc_mqprio staticMao Wenan
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile, make C=2 drivers/net/ethernet/freescale/enetc/enetc.o one warning can be found: drivers/net/ethernet/freescale/enetc/enetc.c:1439:5: warning: symbol 'enetc_setup_tc_mqprio' was not declared. Should it be static? This patch make symbol enetc_setup_tc_mqprio static. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMINMaciej Żenczykowski
NET_RAW is less dangerous, so more likely to be available to a process, so check it first to prevent some spurious logging. This matches IP_TRANSPARENT which checks NET_RAW first. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synicMichael Kelley
The crash handler calls hv_synic_cleanup() to shutdown the Hyper-V synthetic interrupt controller. But if the CPU that calls hv_synic_cleanup() has a VMbus channel interrupt assigned to it (which is likely the case in smaller VM sizes), hv_synic_cleanup() returns an error and the synthetic interrupt controller isn't shutdown. While the lack of being shutdown hasn't caused a known problem, it still should be fixed for highest reliability. So directly call hv_synic_disable_regs() instead of hv_synic_cleanup(), which ensures that the synic is always shutdown. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21drivers/hv: Replace binary semaphore with mutexDavidlohr Bueso
At a slight footprint cost (24 vs 32 bytes), mutexes are more optimal than semaphores; it's also a nicer interface for mutual exclusion, which is why they are encouraged over binary semaphores, when possible. Replace the hyperv_mmio_lock, its semantics implies traditional lock ownership; that is, the lock owner is the same for both lock/unlock operations. Therefore it is safe to convert. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86Boqun Feng
Currently hyperv-iommu is implemented in a x86 specific way, for example, apic is used. So make the HYPERV_IOMMU Kconfig depend on X86 as a preparation for enabling HyperV on architecture other than x86. Cc: Lan Tianyu <Tianyu.Lan@microsoft.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: linux-hyperv@vger.kernel.org Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21HID: hyperv: Add the support of hibernationDexuan Cui
During the suspend process and resume process, if there is any mouse event, there is a small chance the suspend and the resume process can be aborted because of mousevsc_on_receive() -> pm_wakeup_hard_event(). This behavior can be avoided by disabling the Hyper-V mouse device as a wakeup source: echo disabled > /sys/bus/vmbus/drivers/hid_hyperv/XXX/power/wakeup (XXX is the device's GUID). Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-21hv_balloon: Add the support of hibernationDexuan Cui
When hibernation is enabled, we must ignore the balloon up/down and hot-add requests from the host, if any. Signed-off-by: Dexuan Cui <decui@microsoft.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 12:35:23 +0000