summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-01net/mlx5e: Set vlan masks for all offloaded TC rulesJianbo Liu
In flow steering, if asked to, the hardware matches on the first ethertype which is not vlan. It's possible to set a rule as follows, which is meant to match on untagged packet, but will match on a vlan packet: tc filter add dev eth0 parent ffff: protocol ip flower ... To avoid this for packets with single tag, we set vlan masks to tell hardware to check the tags for every matched packet. Fixes: 095b6cfd69ce ('net/mlx5e: Add TC vlan match parsing') Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5: E-Switch, Fix out of bound access when setting vport rateEran Ben Elisha
The code that deals with eswitch vport bw guarantee was going beyond the eswitch vport array limit, fix that. This was pointed out by the kernel address sanitizer (KASAN). The error from KASAN log: [2018-09-15 15:04:45] BUG: KASAN: slab-out-of-bounds in mlx5_eswitch_set_vport_rate+0x8c1/0xae0 [mlx5_core] Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rulesAlaa Hleihel
If the peer device was already unbound, then do not attempt to modify it's resources, otherwise we will crash on dereferencing non-existing device. Fixes: 5c65c564c962 ("net/mlx5e: Support offloading TC NIC hairpin flows") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-01drm/i915: Avoid compiler warning for maybe unused gu_misc_iirChris Wilson
/kisskb/src/drivers/gpu/drm/i915/i915_irq.c: warning: 'gu_misc_iir' may be used uninitialized in this function [-Wuninitialized]: => 3120:10 Silence the compiler warning by ensuring that the local variable is initialised and removing the guard that is confusing the older gcc. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: df0d28c185ad ("drm/i915/icl: GSE interrupt moves from DE_MISC to GU_MISC") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180926104718.17462-1-chris@chris-wilson.co.uk (cherry picked from commit 7a90938332d80faf973fbcffdf6e674e7b8f0914) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-01drm/i915: Do not redefine the has_csr parameter.Anusha Srivatsa
Let us reuse the already defined has_csr check and not redefine it. The main difference is that in effect this will flip .has_csr to 1 (via GEN9_FEATURES which GEN11_FEATURES pulls in). Suggested-by: Imre Deak <imre.deak@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=107382 Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1534527210-16841-1-git-send-email-anusha.srivatsa@intel.com (cherry picked from commit da4468a1aa75457e6134127b19761b7ba62ce945) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-01MAINTAINERS: MIPS/LOONGSON2 ARCHITECTURE - Use the normal wildcard styleJoe Perches
Neither git nor get_maintainer understands the curly brace style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20821/ Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips <linux-mips@linux-mips.org> Cc: LKML <linux-kernel@vger.kernel.org>
2018-10-01Merge tag 'iwlwifi-next-for-kalle-2018-09-28' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second set of iwlwifi patches for 4.20 * TKIP implementation in new devices; * Fix for the shared antenna setting in 22000 series; * Report that we set the RU offset in HE code; * Fix some register addresses in 22000 series; * Fix one FW feature TLV that had a conflict with another value; * A couple of fixes for SoftAP mode; * Work continues for new 22560 hardware; * Some fixes in the datapath; * Some debugging and other general fixes; * Some cleanups, small improvements and other general fixes;
2018-10-01b43: fix spelling mistake "hw_registred" -> "hw_registered"Colin Ian King
Trivial fix to spelling mistake struct field name, rename it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: check for correct CHIP ID at pcie probeIgor Mitsyanko
Make sure that wifi device is of supported variant by checking it's CHIP ID before completing a probe sequence. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac: wait for FW load work to finish at PCIe removeIgor Mitsyanko
Waiting for "completion" to be set in FW load thread can not be used in case PCIe remove is called before FW load work was scheduled. Just wait for work completion instead to avoid problems. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: extract platform-independent PCIe codeIgor Mitsyanko
Extract platform-independent PCIe driver code into a separate file, and use it from platform-specific modules. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac: add missing header includes to bus.hIgor Mitsyanko
A few include directives were missing in bus.h resulting in dependency of include order in other modules. Add missing includes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: rename platform-specific functionsIgor Mitsyanko
Rename several functions to indicate that they are platform specific. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: separate platform-independent PCIe structureIgor Mitsyanko
Move platform-independent PCIe data structure to a separate header file so it can be reused by different devices. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: pearl: rename spinlock tx0_lock to tx_lockIgor Mitsyanko
tx_lock name will later be reused when common pcie code is extracted to separate files. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: indicate pearl-specific structures by their namesIgor Mitsyanko
In preparation to extract common PCIe driver state, indicate PEARL-specific structures by their name and move them to pearl-specific source file. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: rename private Pearl PCIe state structureIgor Mitsyanko
In preparation to extract common pcie driver state into a separate structure, rename Pearl-specific state to qtnf_pcie_pearl_state and move it directly to pearl-specific PCIe source file. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: move Pearl pcie sources to pcie-specific directoryIgor Mitsyanko
In preparation to extract common qtnfmac PCIe driver sources into a separate file, move existing Pearl-specific pcie driver sources to pcie/ directory. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01qtnfmac_pcie: do not store FW name in driver state structureIgor Mitsyanko
Firmware name is only needed at probe stage, no point in keeping it in driver state structure. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800: flush and txstatus rework for rt2800mmioStanislaw Gruszka
Implement custom rt2800mmio flush routine and change txstatus routine to read TX_STA_FIFO also in the tasklet. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2x00: use different txstatus timeouts when flushingStanislaw Gruszka
Use different tx status timeouts for normal operation and when flushing. This increase timeout to 2s for normal operation as when there are bad radio conditions and frames are reposted many times device can not provide the status for quite long. With new timeout we can still get valid status on such bad conditions. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2x00: do not check for txstatus timeout every time on taskletStanislaw Gruszka
Do not check for tx status timeout everytime we perform txstatus tasklet. Perform check once per half a second. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800mmio: use txdone/txstatus routines from libStanislaw Gruszka
Use usb txdone/txstatus routines (now in rt2800libc) for mmio devices. Note this also change how we handle INT_SOURCE_CSR_TX_FIFO_STATUS interrupt. Now it is disabled since IRQ routine till end of the txstatus tasklet (the same behaviour like others interrupts). Reason to do not disable this interrupt was not to miss any tx status from 16 entries FIFO register. Now, since we check for tx status timeout, we can allow to miss some tx statuses. However this will be improved in further patch where I also implement read status FIFO register in the tasklet. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rt2800: move usb specific txdone/txstatus routines to rt2800libStanislaw Gruszka
In order to reuse usb txdone/txstatus routines for mmio, move them to common rt2800lib.c file. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rtlwifi: btcoex: Use proper enumerated types for Wi-Fi only interfaceNathan Chancellor
Clang warns when one enumerated type is implicitly converted to another. drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c:1327:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_PCI; ~ ^~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c:1330:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_USB; ~ ^~~~~~~~~~~~ drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c:1333:34: warning: implicit conversion from enumeration type 'enum btc_chip_interface' to different enumeration type 'enum wifionly_chip_interface' [-Wenum-conversion] wifionly_cfg->chip_interface = BTC_INTF_UNKNOWN; ~ ^~~~~~~~~~~~~~~~ 3 warnings generated. Use the values from the correct enumerated type, wifionly_chip_interface. BTC_INTF_UNKNOWN = WIFIONLY_INTF_UNKNOWN = 0 BTC_INTF_PCI = WIFIONLY_INTF_PCI = 1 BTC_INTF_USB = WIFIONLY_INTF_USB = 2 Link: https://github.com/ClangBuiltLinux/linux/issues/135 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath5k: Remove unused BUG_ONNathan Chancellor
Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/wireless/ath/ath5k/debug.c:1031:14: warning: address of array 'ah->sbands' will always evaluate to 'true' [-Wpointer-bool-conversion] BUG_ON(!ah->sbands); ~~~~~^~~~~~ ./include/asm-generic/bug.h:61:45: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~ ./include/linux/compiler.h:77:42: note: expanded from macro 'unlikely' # define unlikely(x) __builtin_expect(!!(x), 0) ^ 1 warning generated. Given that this condition is always false because of the logical not, just remove it. Link: https://github.com/ClangBuiltLinux/linux/issues/130 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01rsi: Remove unnecessary boolean conditionNathan Chancellor
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/wireless/rsi/rsi_91x_mac80211.c:927:50: warning: address of array 'key->key' will always evaluate to 'true' [-Wpointer-bool-conversion] if (vif->type == NL80211_IFTYPE_STATION && key->key && ~~ ~~~~~^~~ 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/136 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ipw2x00: Remove unnecessary parenthesesNathan Chancellor
Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) { ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: note: remove extraneous parentheses around the comparison to silence this warning if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) { ~ ^ ~ drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: note: use '=' to turn this equality comparison into an assignment if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) { ^~ = 1 warning generated. Link: https://github.com/ClangBuiltLinux/linux/issues/134 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01Merge branch 'bpf-per-cpu-cgroup-storage'Daniel Borkmann
Roman Gushchin says: ==================== This patchset implements per-cpu cgroup local storage and provides an example how per-cpu and shared cgroup local storage can be used for efficient accounting of network traffic. v4->v3: 1) incorporated Alexei's feedback v3->v2: 1) incorporated Song's feedback 2) rebased on top of current bpf-next v2->v1: 1) added a selftest implementing network counters 2) added a missing free() in cgroup local storage selftest ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01selftests/bpf: cgroup local storage-based network countersRoman Gushchin
This commit adds a bpf kselftest, which demonstrates how percpu and shared cgroup local storage can be used for efficient lookup-free network accounting. Cgroup local storage provides generic memory area with a very efficient lookup free access. To avoid expensive atomic operations for each packet, per-cpu cgroup local storage is used. Each packet is initially charged to a per-cpu counter, and only if the counter reaches certain value (32 in this case), the charge is moved into the global atomic counter. This allows to amortize atomic operations, keeping reasonable accuracy. The test also implements a naive network traffic throttling, mostly to demonstrate the possibility of bpf cgroup--based network bandwidth control. Expected output: ./test_netcnt test_netcnt:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01samples/bpf: extend test_cgrp2_attach2 test to use per-cpu cgroup storageRoman Gushchin
This commit extends the test_cgrp2_attach2 test to cover per-cpu cgroup storage. Bpf program will use shared and per-cpu cgroup storages simultaneously, so a better coverage of corresponding core code will be achieved. Expected output: $ ./test_cgrp2_attach2 Attached DROP prog. This ping in cgroup /foo should fail... ping: sendmsg: Operation not permitted Attached DROP prog. This ping in cgroup /foo/bar should fail... ping: sendmsg: Operation not permitted Attached PASS prog. This ping in cgroup /foo/bar should pass... Detached PASS from /foo/bar while DROP is attached to /foo. This ping in cgroup /foo/bar should fail... ping: sendmsg: Operation not permitted Attached PASS from /foo/bar and detached DROP from /foo. This ping in cgroup /foo/bar should pass... ### override:PASS ### multi:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01selftests/bpf: extend the storage test to test per-cpu cgroup storageRoman Gushchin
This test extends the cgroup storage test to use per-cpu flavor of the cgroup storage as well. The test initializes a per-cpu cgroup storage to some non-zero initial value (1000), and then simple bumps a per-cpu counter each time the shared counter is atomically incremented. Then it reads all per-cpu areas from the userspace side, and checks that the sum of values adds to the expected sum. Expected output: $ ./test_cgroup_storage test_cgroup_storage:PASS Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01selftests/bpf: add verifier per-cpu cgroup storage testsRoman Gushchin
This commits adds verifier tests covering per-cpu cgroup storage functionality. There are 6 new tests, which are exactly the same as for shared cgroup storage, but do use per-cpu cgroup storage map. Expected output: $ ./test_verifier #0/u add+sub+mul OK #0/p add+sub+mul OK ... #286/p invalid cgroup storage access 6 OK #287/p valid per-cpu cgroup storage access OK #288/p invalid per-cpu cgroup storage access 1 OK #289/p invalid per-cpu cgroup storage access 2 OK #290/p invalid per-cpu cgroup storage access 3 OK #291/p invalid per-cpu cgroup storage access 4 OK #292/p invalid per-cpu cgroup storage access 5 OK #293/p invalid per-cpu cgroup storage access 6 OK #294/p multiple registers share map_lookup_elem result OK ... #662/p mov64 src == dst OK #663/p mov64 src != dst OK Summary: 914 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01bpftool: add support for PERCPU_CGROUP_STORAGE mapsRoman Gushchin
This commit adds support for BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE map type. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01bpf: sync include/uapi/linux/bpf.h to tools/include/uapi/linux/bpf.hRoman Gushchin
The sync is required due to the appearance of a new map type: BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, which implements per-cpu cgroup local storage. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01bpf: don't allow create maps of per-cpu cgroup local storagesRoman Gushchin
Explicitly forbid creating map of per-cpu cgroup local storages. This behavior matches the behavior of shared cgroup storages. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01bpf: introduce per-cpu cgroup local storageRoman Gushchin
This commit introduced per-cpu cgroup local storage. Per-cpu cgroup local storage is very similar to simple cgroup storage (let's call it shared), except all the data is per-cpu. The main goal of per-cpu variant is to implement super fast counters (e.g. packet counters), which don't require neither lookups, neither atomic operations. >From userspace's point of view, accessing a per-cpu cgroup storage is similar to other per-cpu map types (e.g. per-cpu hashmaps and arrays). Writing to a per-cpu cgroup storage is not atomic, but is performed by copying longs, so some minimal atomicity is here, exactly as with other per-cpu maps. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01bpf: rework cgroup storage pointer passingRoman Gushchin
To simplify the following introduction of per-cpu cgroup storage, let's rework a bit a mechanism of passing a pointer to a cgroup storage into the bpf_get_local_storage(). Let's save a pointer to the corresponding bpf_cgroup_storage structure, instead of a pointer to the actual buffer. It will help us to handle per-cpu storage later, which has a different way of accessing to the actual data. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01bpf: extend cgroup bpf core to allow multiple cgroup storage typesRoman Gushchin
In order to introduce per-cpu cgroup storage, let's generalize bpf cgroup core to support multiple cgroup storage types. Potentially, per-node cgroup storage can be added later. This commit is mostly a formal change that replaces cgroup_storage pointer with a array of cgroup_storage pointers. It doesn't actually introduce a new storage type, it will be done later. Each bpf program is now able to have one cgroup storage of each type. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01wil6210: remove set but not used variable 'start'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/ath/wil6210/pm.c: In function 'wil_suspend_keep_radio_on': drivers/net/wireless/ath/wil6210/pm.c:193:16: warning: variable 'start' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01Merge tag 'vfio-ccw-20181001' of ↵Martin Schwidefsky
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes Pull vfio-ccw from Cornelia Huck with the following changes: - Change allocation of ccw_io_region so that the usercopy hardening code can figure out that everything is fine.
2018-10-01ath9k: debug: remove set but not used variable 'fops_dump_nfcal'YueHaibing
'fops_dump_nfcal' is not used since commit 4447d815fd0f ("ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath9k: add reset for airtime station debugfsLouie Lu
Let user can reset station airtime status by debugfs, it will reset all airtime deficit to ATH_AIRTIME_QUANTUM and reset rx/tx airtime accumulate to 0. Signed-off-by: Louie Lu <git@louie.lu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: disable napi before resource cleanup to avoid "use after free"Govind Singh
CE buffers are cleaned up prior to napi disable and this is causing NULL pointer dereference due to "use after free". Disable napi before resource cleanup to avoid "use after free". Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: move napi_enable to hif_start for consistent pairingGovind Singh
There is unbalanced napi_{enable,disable}() behavior as they are being called from hif_snoc_{power_up/stop). The fix is to call napi_enable() from ath10k_snoc_hif_start() so that it matches with napi_disable() being called from ath10k_snoc_hif_stop(). Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: advertize beacon_int_min_gcd as 100 while bring up multi vapsMaharaja Kennadyrajan
With the latest firmware design, the beacon interval should be greater than 100 to bring the multiple vaps. Set beacon_int_min_gcd to 100, when the wmi service WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT is enabled in the firmware. If not, beacon_int_min_gcd will be set to the default value 1. Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00015 Tested in QCA9888 with firmware ver 10.4-3.5.1-0005 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: add debugfs support to get power save state change of STAMaharaja Kennadyrajan
This patch helps to get the power save state change of each peer connected to the AP. With WMI_10_4_PEER_STA_PS_STATECHG_EVENTID event, ps state of each peer is reported to user space via debugfs. Use the below command to get the ps state of each sta: cat /sys/kernel/debug/ieee80211/phyX/netdev::wlanX/stations/ XX:XX:XX:XX:XX:XX/peer_ps_state If STA is in power save state, we get the peer_ps_state value as 1. if STA is not in power save state, we get the peer_ps_state value as 0. If ps_state event is disabled, we get the peer_ps_state value as 2. We can enable/disable the ps_state events using the debugfs flag "ps_state_enable" echo Y > /sys/kernel/debug/ieee80211/phyX/ath10k/ps_state_enable Y = 1 to enable and Y = 0 to disable Tested in QCA4019 with firmware ver 10.4-3.2.1.1-00011 Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: remove duplicated includesYueHaibing
remove duplicated include from ath10k driver. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: add support for configuring management packet rateSriram R
By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user. This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware. Chipsets Tested : QCA988X, QCA9887, QCA9984 FW Tested : 10.2.4-1.0-41, 10.4-3.6.104 Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01ath10k: remove num_peers in hw_params for most targetsErik Stromdahl
>From commit "ath10k: add per target config of max_num_peers", the num_peers value in struct ath10k_hw_params is used to override the value obtained from the WMI op version in the firmware file. Currently, only high latency devices (USB and SDIO) need to use this value, since the value obtained from the WMI op version is not applicable for these devices. Many devices in ath10k_hw_params_list have the wrong value set. An example of this is the QCA9880 hw2.0 chipset that had (before this patch) num_peers set to TARGET_TLV_NUM_PEERS although the firmware uses WMI version ATH10K_FW_WMI_OP_VERSION_10_2_4. Using the wrong value for the QCA9880 chip results in a fw crash: ath10k_pci 0000:01:00.0: firmware crashed! (guid ddf39880-3e64-4edf-b4e4-979d31724503) ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 0 ath10k_pci 0000:01:00.0: firmware ver 10.2.4-1.0-00037 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 a4a52adb ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1 ath10k_pci 0000:01:00.0: firmware register dump: ath10k_pci 0000:01:00.0: [00]: 0x4100016C 0x000015B3 0x009B54B7 0x00955B31 ath10k_pci 0000:01:00.0: [04]: 0x009B54B7 0x00060530 0x00000011 0x00400000 ath10k_pci 0000:01:00.0: [08]: 0x000001B8 0x00000007 0x00443138 0x00955A00 ath10k_pci 0000:01:00.0: [12]: 0x00000009 0x00000000 0x009B548E 0x009B54AB ath10k_pci 0000:01:00.0: [16]: 0x00958080 0x0094078E 0x00000000 0x00000000 ath10k_pci 0000:01:00.0: [20]: 0x409B54B7 0x0040AC64 0x00400000 0x00000087 ath10k_pci 0000:01:00.0: [24]: 0x809A3831 0x0040ACC4 0x000001B1 0xC09B54B7 ath10k_pci 0000:01:00.0: [28]: 0x809A2F08 0x0040AD04 0x00410410 0x00000001 ath10k_pci 0000:01:00.0: [32]: 0x80988856 0x0040AD24 0x00410410 0x00000001 ath10k_pci 0000:01:00.0: [36]: 0x8098AF64 0x0040AD44 0x00410410 0x00000001 ath10k_pci 0000:01:00.0: [40]: 0x809B5DEC 0x0040AD84 0x00410410 0x00410FF4 ath10k_pci 0000:01:00.0: [44]: 0x809B1F20 0x0040ADA4 0x00400000 0x00416C54 ath10k_pci 0000:01:00.0: [48]: 0x809C0295 0x0040ADE4 0x0040AE08 0x00411DC8 ath10k_pci 0000:01:00.0: [52]: 0x809486FA 0x0040AE04 0x00000001 0x00000000 ath10k_pci 0000:01:00.0: [56]: 0x80948E2C 0x0040AEA4 0x0041F290 0x004123D4 ath10k_pci 0000:01:00.0: Copy Engine register dump: ath10k_pci 0000:01:00.0: [00]: 0x00057400 10 10 3 3 ath10k_pci 0000:01:00.0: [01]: 0x00057800 3 3 8 9 ath10k_pci 0000:01:00.0: [02]: 0x00057c00 2 2 1 2 ath10k_pci 0000:01:00.0: [03]: 0x00058000 1 1 2 1 ath10k_pci 0000:01:00.0: [04]: 0x00058400 0 0 40 0 ath10k_pci 0000:01:00.0: [05]: 0x00058800 1 1 0 1 ath10k_pci 0000:01:00.0: [06]: 0x00058c00 0 0 0 0 ath10k_pci 0000:01:00.0: [07]: 0x00059000 0 0 0 0 Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-10-03 15:07:53 +0000