| Age | Commit message (Collapse) | Author |
|---|
|
This patch introduces 2 PXP debugfs entries:
- info: prints the current PXP status and key instance
- terminate: simulate a termination interrupt
The first one is useful for debug, while the second one can be used for
testing the termination flow.
v2: move the info prints inside the lock (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-13-daniele.ceraolospurio@intel.com
|
|
The HW suspend flow kills all PXP HWDRM sessions, so we need to mark all
the queues and BOs as invalid and do a full termination when PXP is next
used.
v2: rebase
v3: rebase on new status flow, defer termination to next PXP use as it
makes things much easier and allows us to use the same function for all
types of suspend.
v4: fix the documentation of the suspend function (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-12-daniele.ceraolospurio@intel.com
|
|
The driver needs to know if a BO is encrypted with PXP to enable the
display decryption at flip time.
Furthermore, we want to keep track of the status of the encryption and
reject any operation that involves a BO that is encrypted using an old
key. There are two points in time where such checks can kick in:
1 - at VM bind time, all operations except for unmapping will be
rejected if the key used to encrypt the BO is no longer valid. This
check is opt-in via a new VM_BIND flag, to avoid a scenario where a
malicious app purposely shares an invalid BO with a non-PXP aware
app (such as a compositor). If the VM_BIND was failed, the
compositor would be unable to display anything at all. Allowing the
bind to go through means that output still works, it just displays
garbage data within the bounds of the illegal BO.
2 - at job submission time, if the queue is marked as using PXP, all
objects bound to the VM will be checked and the submission will be
rejected if any of them was encrypted with a key that is no longer
valid.
Note that there is no risk of leaking the encrypted data if a user does
not opt-in to those checks; the only consequence is that the user will
not realize that the encryption key is changed and that the data is no
longer valid.
v2: Better commnnts and descriptions (John), rebase
v3: Properly return the result of key_assign up the stack, do not use
xe_bo in display headers (Jani)
v4: improve key_instance variable documentation (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-11-daniele.ceraolospurio@intel.com
|
|
PXP prerequisites (SW proxy and HuC auth via GSC) are completed
asynchronously from driver load, which means that userspace can start
submitting before we're ready to start a PXP session. Therefore, we need
a query that userspace can use to check not only if PXP is supported but
also to wait until the prerequisites are done.
v2: Improve doc, do not report TYPE_NONE as supported (José)
v3: Better comments, remove unneeded copy_from_user (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-10-daniele.ceraolospurio@intel.com
|
|
Userspace is required to mark a queue as using PXP to guarantee that the
PXP instructions will work. In addition to managing the PXP sessions,
when a PXP queue is created the driver will set the relevant bits in
its context control register.
On submission of a valid PXP queue, the driver will validate all
encrypted objects mapped to the VM to ensured they were encrypted with
the current key.
v2: Remove pxp_types include outside of PXP code (Jani), better comments
and code cleanup (John)
v3: split the internal PXP management to a separate patch for ease of
review. re-order ioctl checks to always return -EINVAL if parameters are
invalid, rebase on msix changes.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
|
|
We expect every queue that uses PXP to be marked as doing so, to allow
the driver to correctly manage the encryption status. The API for doing
this from userspace is coming in the next patch, while this patch
implement the management side of things. When a PXP queue is created,
the driver will do the following:
- Start the default PXP session if it is not already running;
- assign an rpm ref to the queue to keep for its lifetime (this is
required because PXP HWDRM sessions are killed by the HW suspend flow).
Since PXP start and termination can race each other, this patch also
introduces locking and a state machine to keep track of the pending
operations. Note that since we'll need to take the lock from the
suspend/resume paths as well, we can't do submissions while holding it,
which means we need a slightly more complicated state machine to keep
track of intermediate steps.
v4: new patch in the series, split from the following interface patch to
keep review manageable. Lock and status rework to not do submissions
under lock.
v5: Improve comments and error logs (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-8-daniele.ceraolospurio@intel.com
|
|
A session is initialized (i.e. started) by sending a message to the GSC.
The initialization will be triggered when a user opts-in to using PXP;
the interface for that is coming in a follow-up patch in the series.
v2: clean up error messages, use new ARB define (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-7-daniele.ceraolospurio@intel.com
|
|
When something happen to the session, the HW generates a termination
interrupt. In reply to this, the driver is required to submit an inline
session termination via the VCS, trigger the global termination and
notify the GSC FW that the session is now invalid.
v2: rename ARB define to make it cleaner to move it to uapi (John)
v3: fix parameter name in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-6-daniele.ceraolospurio@intel.com
|
|
After a session is terminated, we need to inform the GSC so that it can
clean up its side of the allocation. This is done by sending an
invalidation command with the session ID.
The invalidation will be triggered in response to a termination,
interrupt, whose handling is coming in the next patch in the series.
v2: Better comment and error messages (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-5-daniele.ceraolospurio@intel.com
|
|
The key termination is done with a specific submission to the VCS
engine. This flow will be triggered in response to a termination
interrupt, whose handling is coming in a follow-up patch in the series.
v2: clean up defines and command emission code. (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-4-daniele.ceraolospurio@intel.com
|
|
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
|
|
As the first step towards adding PXP support, hook in the PXP init
function, allocate the PXP structure and initialize the KCR register to
allow PXP HWDRM sessions.
v2: remove unneeded includes, free PXP memory on error (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-2-daniele.ceraolospurio@intel.com
|
|
Fix incorrect format of compatible string (comma instead of hyphen) for
TI's AM62A7 SoC.
s/ti,am62a7,dss/ti,am62a7-dss
Fixes: 7959ceb767e4 ("dt-bindings: display: ti: Add support for am62a7 dss")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250203155431.2174170-1-devarsht@ti.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Commit 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85dc9 ("drm/xe: Revert some changes that break a mesa debug tool")
Fixes: ec1455ce7e35 ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2c95bbf5002776117a69caed3b31c10bf7341bec)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Having the exec queue snapshot inside a "GuC CT" section was always
wrong. Commit c28fd6c358db ("drm/xe/devcoredump: Improve section
headings and add tile info") tried to fix that bug, but with that also
broke the mesa tool that parses the devcoredump, hence it was reverted
in commit a53da2fb25a3 ("drm/xe: Revert some changes that break a mesa
debug tool").
With the mesa tool also fixed, this can propagate as a fix on both
kernel and userspace side to avoid unnecessary headache for a debug
feature.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: a53da2fb25a3 ("drm/xe: Revert some changes that break a mesa debug tool")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250123051112.1938193-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a37934ea75d331fafa7fe80b6180642ba5193422)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We rely on stream->pollin to decide whether or not to block during
poll/read calls. However, currently there are blocking read code paths
which don't even set stream->pollin. The best place to consistently set
stream->pollin for all code paths is therefore to set it in
xe_oa_buffer_check_unlocked.
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115222029.3002103-1-ashutosh.dixit@intel.com
(cherry picked from commit d3fedff828bb7e4a422c42caeafd5d974e24ee43)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The migration support only needs to be initialized once, but it
was incorrectly called from the xe_gt_sriov_pf_init_hw(), which
is part of the reset flow and may be called multiple times.
Fixes: d86e3737c7ab ("drm/xe/pf: Add functions to save and restore VF GuC state")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120232443.544-1-michal.wajdeczko@intel.com
(cherry picked from commit 9ebb5846e1a3b1705f8a7cbc528888a1aa0b163e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
UMD's have interest in setting unused bits of the oa_ctrl register "out of
band" for certain experiments. To facilitate this, don't clobber previous
oa_ctrl unused bits, i.e. rmw the values rather than simply write them.
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
(cherry picked from commit cfa9d40db8c30d894171010fe765d96e9bc6a47e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4),
but location can have size up to 6. As a result, it is necessary to
check location against MAX_HPO_DP2_ENCODERS.
Similiarly, disp_cfg_stream_location can be used as an array index which
should be 0..5, so the ASSERT's conditions should be less without equal.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Vulkan can't support DCC and Z/S compression on GFX12 without
WRITE_COMPRESS_DISABLE in this commit or a completely different DCC
interface.
AMDGPU_TILING_GFX12_SCANOUT is added because it's already used by userspace.
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
- Properly cast the input to secs_to_jiffies() to unsigned long as
otherwise the result uses the data type of the input variable, which
causes result range checks to fail if the input data type is signed
and smaller than unsigned long.
- Handle late armed hrtimers gracefully on CPU hotplug
There are legitimate cases where a hrtimer is (re)armed on an
outgoing CPU after the timers have been migrated away. This triggers
warnings and caused people to implement horrible workarounds in RCU.
But those workarounds are incomplete and do not cover e.g. the
scheduler hrtimers.
Stop this by force moving timer which are enqueued on the current CPU
after timer migration to be queued on a remote online CPU.
This allows to undo the workarounds in a seperate step.
- Demote a warning level printk() to info level in the clocksource
watchdog code as there is no point to emit a warning level message
for a purely informational message.
- Mark a helper function __always_inline and move it into the existing
#ifdef block to avoid 'unused function' warnings from CLANG
* tag 'timers-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jiffies: Cast to unsigned long in secs_to_jiffies() conversion
clocksource: Use pr_info() for "Checking clocksource synchronization" message
hrtimers: Force migrate away hrtimers queued after CPUHP_AP_HRTIMERS_DYING
hrtimers: Mark is_migration_base() with __always_inline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Ensure ordering of memory and device I/O for IPIs on RISCV
The RISCV interrupt controllers use writel_relaxed() for generating
an IPI. That's a device I/O write which is not guaranteed to be
ordered against preceding memory writes. As a consequence a IPI
receiving CPU might not be able to observe the actual IPI data which
is required to handle it. Switch to writel() which contains the
necessary memory barriers to enforce ordering.
- Fix up the fallout of the MSI conversion in the MVEVBU ICU driver.
The conversion failed to handle the change of the data storage and
kept the original code which uses the domain::host_data pointer
unchanged. After the conversion domain::host_data points to the new
msi_domain_info structure and not longer to the MVEBU specific MSI
data, which is now stored in a member of msi_domain_info. This leads
to malfunction of the transalate() callback.
- Only handle the PMC in FIQ mode when it is configured that way.
The original check was incorrect as it did not explicitely check for
the proper conditions, which led to malfunctions of the PMU
interrupt.
- Improve Kconfig dependencies for the LAN966x Outband Interrupt
controller to avoid pointless pronmpts.
* tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured so
irqchip/irq-mvebu-icu: Fix access to msi_data from irq_domain::host_data
irqchip/riscv: Ensure ordering of memory writes and IPI writes
irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCI
dt-bindings: interrupt-controller: microchip,lan966x-oic: Clarify endpoint use
|
|
Pull xfs bug fixes from Carlos Maiolino:
"A few fixes for XFS, but the most notable one is:
- xfs: remove xfs_buf_cache.bc_lock
which has been hit by different persons including syzbot"
* tag 'xfs-fixes-6.14-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove xfs_buf_cache.bc_lock
xfs: Add error handling for xfs_reflink_cancel_cow_range
xfs: Propagate errors from xfs_reflink_cancel_cow_range in xfs_dax_write_iomap_end
xfs: don't call remap_verify_area with sb write protection held
xfs: remove an out of data comment in _xfs_buf_alloc
xfs: fix the entry condition of exact EOF block allocation optimization
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- Connection fixes for fibre channel transport (Daniel)
- Endian fixes (Keith, Christoph)
- Cleanup fix for host memory buffer (Francis)
- Platform specific power quirks (Georg)
- Target memory leak (Sagi)
- Use appropriate controller state accessor (Daniel)"
* tag 'nvme-6.14-2025-01-31' of git://git.infradead.org/nvme:
nvme-fc: use ctrl state getter
nvme: make nvme_tls_attrs_group static
nvmet: add a missing endianess conversion in nvmet_execute_admin_connect
nvmet: the result field in nvmet_alloc_ctrl_args is little endian
nvmet: fix a memory leak in controller identify
nvme-fc: do not ignore connectivity loss during connecting
nvme: handle connectivity loss in nvme_set_queue_count
nvme-fc: go straight to connecting state when initializing
nvme-pci: Add TUXEDO IBP Gen9 to Samsung sleep quirk
nvme-pci: Add TUXEDO InfinityFlex to Samsung sleep quirk
nvme-pci: remove redundant dma frees in hmb
nvmet: fix rw control endian access
|
|
Since commit 014125c64d09 ("drm/xe: Support 'nomodeset' kernel
command-line option") the dummy exit is not needed anymore since the
caller check for a NULL pointer. Drop it.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131223908.4147195-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
While the MIDI jacks are configured correctly, and the MIDIStreaming
endpoint descriptors are filled with the correct information,
bNumEmbMIDIJack and bLength are set incorrectly in these descriptors.
This does not matter when the numbers of in and out ports are equal, but
when they differ the host will receive broken descriptors with
uninitialized stack memory leaking into the descriptor for whichever
value is smaller.
The precise meaning of "in" and "out" in the port counts is not clearly
defined and can be confusing. But elsewhere the driver consistently
uses this to match the USB meaning of IN and OUT viewed from the host,
so that "in" ports send data to the host and "out" ports receive data
from it.
Cc: stable <stable@kernel.org>
Fixes: c8933c3f79568 ("USB: gadget: f_midi: allow a dynamic number of input and output ports")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node"
is set to hsotg->dev->of_node.
It causes errors when binding the gadget driver several times, on
stm32mp157c-ev1 board. Below error is seen:
"pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0"
The first time, no issue is seen as when registering the driver, of_node
isn't NULL:
-> gadget_dev_desc_UDC_store
-> usb_gadget_register_driver_owner
-> driver_register
...
-> really_probe -> pinctrl_bind_pins (no effect)
Then dwc2_hsotg_udc_start() sets of_node.
The second time (stop the gadget, reconfigure it, then start it again),
of_node has been set, so the probing code tries to acquire pins for the
gadget. These pins are hold by the controller, hence the error.
So clear gadget.dev.of_node in udc_stop() routine to avoid the issue.
Fixes: 7d7b22928b90 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Robert Morris created a test program which can cause
usb_hub_to_struct_hub() to dereference a NULL or inappropriate
pointer:
Oops: general protection fault, probably for non-canonical address
0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14
Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110
...
Call Trace:
<TASK>
? die_addr+0x31/0x80
? exc_general_protection+0x1b4/0x3c0
? asm_exc_general_protection+0x26/0x30
? usb_hub_adjust_deviceremovable+0x78/0x110
hub_probe+0x7c7/0xab0
usb_probe_interface+0x14b/0x350
really_probe+0xd0/0x2d0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x6e/0x110
driver_probe_device+0x1a/0x90
__device_attach_driver+0x7e/0xc0
bus_for_each_drv+0x7f/0xd0
__device_attach+0xaa/0x1a0
bus_probe_device+0x8b/0xa0
device_add+0x62e/0x810
usb_set_configuration+0x65d/0x990
usb_generic_driver_probe+0x4b/0x70
usb_probe_device+0x36/0xd0
The cause of this error is that the device has two interfaces, and the
hub driver binds to interface 1 instead of interface 0, which is where
usb_hub_to_struct_hub() looks.
We can prevent the problem from occurring by refusing to accept hub
devices that violate the USB spec by having more than one
configuration or interface.
Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers/usb/gadget/udc/renesas_usb3.c: In function 'renesas_usb3_probe':
drivers/usb/gadget/udc/renesas_usb3.c:2638:73: warning: '%d'
directive output may be truncated writing between 1 and 11 bytes into a
region of size 6 [-Wformat-truncation=]
2638 | snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~ ^~ ^
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201409.BIQPtkeB-lkp@intel.com/
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250122081231.47594-1-guoren@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing description to the nostream_work of dwc3_ep. The work is
used by bulk multi-stream endpoints for a NoStream event to reinitiate
the stream if needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250120182219.30dcb3c6@canb.auug.org.au/
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/7cdeaa346d24907712aac533c1c5f90a03151189.1737500936.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit c141ecc3cecd7 ("of: Warn when of_property_read_bool() is
used on non-boolean properties") a warning is raised if this function
is used for property detection. of_property_present() is the correct
helper for this.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250120144251.580981-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
retries
The current implementation sets the wMaxPacketSize of bulk in/out
endpoints to 1024 bytes at the end of the f_midi_bind function. However,
in cases where there is a failure in the first midi bind attempt,
consider rebinding. This scenario may encounter an f_midi_bind issue due
to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024
bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX
FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS
speed only.
Here the term "rebind" in this context refers to attempting to bind the
MIDI function a second time in certain scenarios. The situations where
rebinding is considered include:
* When there is a failure in the first UDC write attempt, which may be
caused by other functions bind along with MIDI.
* Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to
MIDI,ADB.
This commit addresses this issue by resetting the wMaxPacketSize before
endpoint claim. And here there is no need to reset all values in the usb
endpoint descriptor structure, as all members except wMaxPacketSize and
bEndpointAddress have predefined values.
This ensures that restores the endpoint to its expected configuration,
and preventing conflicts with value of ep->maxpacket_limit. It also
aligns with the approach used in other function drivers, which treat
endpoint descriptors as if they were full speed before endpoint claim.
Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation")
Cc: stable@vger.kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The doc-comment for `struct atmel_qspi_pcal` had a typo in one of the
struct members' name, causing a warning with the `W=1` option.
Fixes: 5af42209a4d2 ("spi: atmel-quadspi: Add support for sama7g5 QSPI")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501311707.Ltj0qXse-lkp@intel.com/
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250203151249.79876-2-csokas.bence@prolan.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
atomic context
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency.
Fixes: 7560c02bdffb ("clocksource: Check per-CPU clock synchronization when marked unstable")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/all/20250131173323.891943-2-longman@redhat.com
|
|
Move towards always using the fxp q4 or .4 fixed point format for
compressed bpp. We'll need to pass the more accurate bpp to this
function later on.
Always use _x16 naming for variables that are in .4 fixed point for
clarity.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/887306a47ce4550226f5d54178f667a52840a11c.1738327620.git.jani.nikula@intel.com
|
|
Going forward, we'll need the connector state in
dsc_compute_link_config(). Pass it along through the chain. Maintain the
same parameter order where relevant.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/645d950a80df5fd4441d69aba4893ab263b3e555.1738327620.git.jani.nikula@intel.com
|
|
The parameter is basically just a proxy for whether the function is
being called for DP SST or DP MST. We can figure this out from crtc
state.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/82a4b84711b1416bb3382f5d8383fe65ab88159a.1738327620.git.jani.nikula@intel.com
|
|
Just use ints unless there are actual reasons to do otherwise. Here,
there are not.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b8f9aebc4e40afeed3d723f98cae96c9c927a480.1738327620.git.jani.nikula@intel.com
|
|
Drop the extra local variables and simplify the conditions. We don't
have to try to special case the loop condition and break in the validity
checks.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5559b14d6af4e001677f23454d6bd8b3606b3d7a.1738327620.git.jani.nikula@intel.com
|
|
With just the one platform independent loop left in
do_dsc_compute_compressed_bpp(), we don't really need the extra function
that is simply becoming increasingly hard to even figure out a decent
name for. Just merge the whole thing to
dsc_compute_compressed_bpp(). Good riddance to the short lived
do_dsc_compute_compressed_bpp().
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91ae42cbdffe4938a665667955c577f887b92b9d.1738327620.git.jani.nikula@intel.com
|
|
{icl,xelpd}_dsc_compute_link_config() are now effectively the same, and
can be unified to a single platform independent function.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ca41ebb287fc51e1257d3c2b2790edf2cd661ab3.1738327620.git.jani.nikula@intel.com
|
|
Add the fractional DSC BPP force check to intel_dp_dsc_valid_bpp(), and
use that in xelpd_dsc_compute_link_config(). This is another step closer
towards unifying the platform specific functions.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d8cdfef422dc2229d3ead2201bff4a321cbbdd3.1738327620.git.jani.nikula@intel.com
|
|
Instead of iterating the valid BPP array directly, switch to the same
approach as xelpd_dsc_compute_link_config(), with a separate function to
check if the DSC BPP is valid. This prepares us for unifying the
platform specific functions.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc1972391041a3ba84b3f68b9c0605ae142611e0.1738327620.git.jani.nikula@intel.com
|
|
Now that {icl,xelpd}_dsc_compute_link_config() take .4 fixed point as
parameter, move the common max DSC BPP reduction one level higher. Use
intel_dp_dsc_bpp_step() to compute the step, and pass on to both
platform specific functions. (Though it's unused for now in
icl_dsc_compute_link_config()).
We can drop the pipe_bpp and connector parameters.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/62fa7f18ea49dce24c5d0ee7b2f0cbde9e2b609c.1738327620.git.jani.nikula@intel.com
|
|
Try to keep the variables in the same domain a bit longer to reduce
juggling between integers and .4 fixed point. Change parameter order to
min, max while at it.
For now, keep the juggling in dsc_compute_compressed_bpp() ensure
min/max will always have 0 fractional part. To be fixed later.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e72f153fd28755e41ee8c5a7b9e6de257c3b27ac.1738327620.git.jani.nikula@intel.com
|
|
Use the _x16 suffix for all .4 fixed point variables. Drop compressed_
prefix, as it's implied from the precision suffix.
As dsc_min_bpp and dsc_max_bpp change domain from int to .4 in the
middle of the function, they remain the same for now.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/91dd6ef53683b624a978101cca7322ea3e5e2f7b.1738327620.git.jani.nikula@intel.com
|
|
Add a platform independent helper for getting the supported DSC BPP step
for the link.
v2: Use fxp_q4_from_int(1) (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250131232815.2046237-1-jani.nikula@intel.com
|
|
Commit 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
|
|
The scale() functions detects invalid parameters, but continues
its calculations anyway. This causes bad results if negative values
are used for unsigned operations. Worst case, a division by 0 error
will be seen if source_min == source_max.
On top of that, after v6.13, the sequence of WARN_ON() followed by clamp()
may result in a build error with gcc 13.x.
drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale':
include/linux/compiler_types.h:542:45: error:
call to '__compiletime_assert_415' declared with attribute error:
clamp() low limit source_min greater than high limit source_max
This happens if the compiler decides to rearrange the code as follows.
if (source_min > source_max) {
WARN(..);
/* Do the clamp() knowing that source_min > source_max */
source_val = clamp(source_val, source_min, source_max);
} else {
/* Do the clamp knowing that source_min <= source_max */
source_val = clamp(source_val, source_min, source_max);
}
Fix the problem by evaluating the return values from WARN_ON and returning
immediately after a warning. While at it, fix divide by zero error seen
if source_min == source_max.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 6f71507415841d1a6d38118e5fa0eaf0caab9c17)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
