summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-09usb: typec: intel_pmc_mux: Use correct response message bitsUtkarsh Patel
When Intel PMC Mux agent driver receives the response message from PMC, it checks for the same response bits for all the mux states. Corrected it by checking correct response message bits, Bit 8 & 9 for the SAFE Mode and Alternate Modes and Bit 16 & 17 for the Connect and Disconnect Modes. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Link: https://lore.kernel.org/r/20201203220813.16281-1-utkarsh.h.patel@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probeZhang Qilong
The pm_runtime_enable will decrement the power disable depth. Imbalance depth will resulted in enabling runtime PM of device fails later. Thus a pairing decrement must be needed on the error handling path to keep it balanced. Fixes: 6c984b066d84b ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201123145719.1455849-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09xhci: Give USB2 ports time to enter U3 in bus suspendLi Jun
If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state. Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0. [commit message rewording -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCIMika Westerberg
Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-5-mathias.nyman@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LPHans de Goede
The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt controller awake if the host controller is not allowed to sleep. This is the case even if no USB devices are connected to the host. Add the Intel Alpine Ridge LP product-id to the list of product-ids for which we allow runtime PM by default. Fixes: 2815ef7fe4d4 ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") Cc: <stable@vger.kernel.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09usb: xhci: Use temporary buffer to consolidate SGTejas Joglekar
The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8 for HS. The controller loads and updates the TRB cache from the transfer ring in system memory whenever the driver issues a start transfer or update transfer command. For chained TRBs, the Synopsys xHC requires that the total amount of bytes for all TRBs loaded in the TRB cache be greater than or equal to 1 MPS. Or the chain ends within the TRB cache (with a last TRB). If this requirement is not met, the controller will not be able to send or receive a packet and it will hang causing a driver timeout and error. This can be a problem if a class driver queues SG requests with many small-buffer entries. The XHCI driver will create a chained TRB for each entry which may trigger this issue. This patch adds logic to the XHCI driver to detect and prevent this from happening. For every (TRB_CACHE_SIZE - 2), we check the total buffer size of the SG list and if the last window of (TRB_CACHE_SIZE - 2) SG list length and we don't make up at least 1 MPS, we create a temporary buffer to consolidate full SG list into the buffer. We check at (TRB_CACHE_SIZE - 2) window because it is possible that there would be a link and/or event data TRB that take up to 2 of the cache entries. We discovered this issue with devices on other platforms but have not yet come across any device that triggers this on Linux. But it could be a real problem now or in the future. All it takes is N number of small chained TRBs. And other instances of the Synopsys IP may have smaller values for the TRB_CACHE_SIZE which would exacerbate the problem. Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRKTejas Joglekar
This commit uses the private data passed by parent device to set the quirk for Synopsys xHC. This patch fixes the SNPS xHC hang issue when the data is scattered across small buffers which does not make atleast MPS size for given TRB cache size of SNPS xHC. Signed-off-by: Tejas Joglekar <joglekar@synopsys.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201208092912.1773650-2-mathias.nyman@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09Merge tag 'phy-for-5.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.11 - New phy drivers: - Mediatek MT7621 PCIe PHY (promoted from staging) - Ingenic USB phy driver supporting JZ4775 and X2000 - Intel Keem Bay USB PHY driver - Marvell USB HSIC PHY driver supporting MMP3 SoC - AXG MIPI D-PHY driver - Updates: - Conversion to YAML binding for: - Broadcom SATA PHY - Cadence Sierra PHY bindings - STM32 USBC Phy - Support for Exynos5433 PCIe PHY - Support for Qualcomm SM8250 PCIe QMP PHY - Support for Exynos5420 USB2 phy - devm_platform_ioremap_resource conversion for bunch of drivers * tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) drm/mediatek: avoid dereferencing a null hdmi_phy on an error message phy: ingenic: depend on HAS_IOMEM phy: mediatek: statify mtk_hdmi_phy_driver dt-bindings: phy: Convert Broadcom SATA PHY to YAML devicetree: phy: rockchip-emmc add output-tapdelay-select phy: rockchip-emmc: output tap delay dt property PHY: Ingenic: Add USB PHY driver using generic PHY framework. dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000. USB: PHY: JZ4770: Remove unnecessary function calls. devicetree: phy: rockchip-emmc: pulldown property phy: rockchip: set pulldown for strobe line in dts phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure phy: mediatek: allow compile-testing the hdmi phy phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250 phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors phy: tegra: xusb: Fix usb_phy device driver field phy: amlogic: replace devm_reset_control_array_get() ...
2020-12-09powerpc/64: irq replay remove decrementer overflow checkNicholas Piggin
This is way to catch some cases of decrementer overflow, when the decrementer has underflowed an odd number of times, while MSR[EE] was disabled. With a typical small decrementer, a timer that fires when MSR[EE] is disabled will be "lost" if MSR[EE] remains disabled for between 4.3 and 8.6 seconds after the timer expires. In any case, the decrementer interrupt would be taken at 8.6 seconds and the timer would be found at that point. So this check is for catching extreme latency events, and it prevents those latencies from being a further few seconds long. It's not obvious this is a good tradeoff. This is already a watchdog magnitude event and that situation is not improved a significantly with this check. For large decrementers, it's useless. Therefore remove this check, which avoids a mftb when enabling hard disabled interrupts (e.g., when enabling after coming from hardware interrupt handlers). Perhaps more importantly, it also removes the clunky MSR[EE] vs PACA_IRQ_HARD_DIS incoherency in soft-interrupt replay which simplifies the code. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201107014336.2337337-1-npiggin@gmail.com
2020-12-09powerpc/64s: Remove MSR[ISF] bitNicholas Piggin
No supported processor implements this mode. Setting the bit in MSR values can be a bit confusing (and would prevent the bit from ever being reused). Remove it. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201106045340.1935841-1-npiggin@gmail.com
2020-12-09powerpc/64s/iommu: Don't use atomic_ function on atomic64_t typeNicholas Piggin
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201111110723.3148665-3-npiggin@gmail.com
2020-12-09powerpc/32s: Cleanup around PTE_FLAGS_OFFSET in hash_low.SChristophe Leroy
PTE_FLAGS_OFFSET is defined in asm/page_32.h and used only in hash_low.S And PTE_FLAGS_OFFSET nullity depends on CONFIG_PTE_64BIT Instead of tests like #if (PTE_FLAGS_OFFSET != 0), use CONFIG_PTE_64BIT related code. Also move the definition of PTE_FLAGS_OFFSET into hash_low.S directly, that improves readability. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f5bc21db7a33dab55924734e6060c2e9daed562e.1606247495.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: In add_hash_page(), calculate VSID laterChristophe Leroy
VSID is only for create_hpte(). When _PAGE_HASHPTE is already set, add_hash_page() bails out without calling create_hpte() and doesn't need the value of VSID. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3907199974c89b85a3441cf3f528751173b7649c.1606247495.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Remove unused counters incremented by create_hpte()Christophe Leroy
primary_pteg_full and htab_hash_searches are not used. Remove them. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6470ab99e58c84a5445af43ce4d1d772b0dc3e93.1606247495.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/mm: Refactor the floor/ceiling check in hugetlb range freeing functionsChristophe Leroy
All hugetlb range freeing functions have a verification like the following, which only differs by the mask used, depending on the page table level. start &= MASK; if (start < floor) return; if (ceiling) { ceiling &= MASK; if (! ceiling) return; } if (end - 1 > ceiling - 1) return; Refactor that into a helper function which takes the mask as an argument, returning true when [start;end[ is not fully contained inside [floor;ceiling[ Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/16a571bb32eb6e8cd44bda484c8d81cd8a25e6d7.1604668827.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/fault: Perform exception fixup in do_page_fault()Christophe Leroy
Exception fixup doesn't require the heady full regs saving, do it from do_page_fault() directly. For that, split bad_page_fault() in two parts. As bad_page_fault() can also be called from other places than handle_page_fault(), it will still perform exception fixup and fallback on __bad_page_fault(). handle_page_fault() directly calls __bad_page_fault() as the exception fixup will now be done by do_page_fault() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bd07d6fef9237614cd6d318d8f19faeeadaa816b.1607491748.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/fault: Avoid heavy search_exception_tables() verificationChristophe Leroy
search_exception_tables() is an heavy operation, we have to avoid it. When KUAP is selected, we'll know the fault has been blocked by KUAP. When it is blocked by KUAP, check whether we are in an expected userspace access place. If so, emit a warning to spot something is going work. Otherwise, just remain silent, it will likely Oops soon. When KUAP is not selected, it behaves just as if the address was already in the TLBs and no fault was generated. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9870f01e293a5a76c4f4e4ddd4a6b0f63038c591.1607491748.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/mm: Move the WARN() out of bad_kuap_fault()Christophe Leroy
In order to prepare the removal of calls to search_exception_tables() on the fast path, move the WARN() out of bad_kuap_fault(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9501311014bd6507e04b27a0c3035186ccf65cd5.1607491748.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/fault: Unnest definition of page_fault_is_write() and ↵Christophe Leroy
page_fault_is_bad() To make it more readable, separate page_fault_is_write() and page_fault_is_bad() to avoir several levels of #ifdefs Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6afaac2495248d68f94c438c5ec36b6010931de5.1607491748.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/mm: sanity_check_fault() should work for all, not only BOOK3SChristophe Leroy
The verification and message introduced by commit 374f3f5979f9 ("powerpc/mm/hash: Handle user access of kernel address gracefully") applies to all platforms, it should not be limited to BOOK3S. Make the BOOK3S version of sanity_check_fault() the one for all, and bail out earlier if not BOOK3S. Fixes: 374f3f5979f9 ("powerpc/mm/hash: Handle user access of kernel address gracefully") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fe199d5af3578d3bf80035d203a94d742a7a28af.1607491748.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/ppc-opcode: Add PPC_RAW_MFSPR()Christophe Leroy
Add PPC_RAW_MFSPR() to replace open coding done in 8xx-pmu.c Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e281e3a611eead8817c49cf06a60072a021af823.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/8xx: Use SPRN_SPRG_SCRATCH2 in DTLB miss exceptionChristophe Leroy
Use SPRN_SPRG_SCRATCH2 in DTLB miss exception instead of DAR in order to be similar to ITLB miss exception. This also simplifies mpc8xx_pmu_del() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e3cc8f023ef40e1e8ae144e4dd1330a5ff022528.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/8xx: Use SPRN_SPRG_SCRATCH2 in ITLB miss exceptionChristophe Leroy
In order to re-enable MMU earlier, ensure ITLB miss exception cannot clobber SPRN_SPRG_SCRATCH0 and SPRN_SPRG_SCRATCH1. Do so by using SPRN_SPRG_SCRATCH2 and SPRN_M_TW instead, like the DTLB miss exception. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/abc78e8e9577d473691ebb9996c6413b37bfd9ca.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/8xx: Simplify INVALIDATE_ADJACENT_PAGES_CPU15Christophe Leroy
We now have r11 available as a scratch register so INVALIDATE_ADJACENT_PAGES_CPU15() can be simplified. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bdafd651b4ac3a851fd09249f5f3699c50da29f2.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/8xx: Always pin kernel text TLBChristophe Leroy
There is no big poing in not pinning kernel text anymore, as now we can keep pinned TLB even with things like DEBUG_PAGEALLOC. Remove CONFIG_PIN_TLB_TEXT, making it always right. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop ifdef around mmu_pin_tlb() to fix build errors] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/203b89de491e1379f1677a2685211b7c32adfff0.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09erofs: force inplace I/O under low memory scenarioGao Xiang
Try to forcely switch to inplace I/O under low memory scenario in order to avoid direct memory reclaim due to cached page allocation. Link: https://lore.kernel.org/r/20201209123717.12430-1-hsiangkao@aol.com Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2020-12-09spi: dw: Add support for the Canaan K210 SoC SPIDamien Le Moal
The Canaan Kendryte K210 RISC-V SoC includes a DW apb_ssi v4 controller which is documented to have a 32 words deep TX and RX FIFO. The FIFO length detection in spi_hw_init() correctly detects this value. However, when the controller RX FIFO is filled up to 32 entries (RXFLR = 32), an RX FIFO overrun error occurs. This likely due to a hardware bug which can be avoided by force setting the fifo_len field of struct dw_spi to 31. Define the dw_spi_canaan_k210_init() function to force set fifo_len to 31 when the device node compatible string is "canaan,k210-spi". Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20201206011817.11700-4-damien.lemoal@wdc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09spi: dw: Add support for 32-bits max xfer sizeDamien Le Moal
The Synopsis DesignWare DW_apb_ssi specifications version 3.23 onward define a 32-bits maximum transfer size synthesis parameter (SSI_MAX_XFER_SIZE=32) in addition to the legacy 16-bits configuration (SSI_MAX_XFER_SIZE=16) for SPI controllers. When SSI_MAX_XFER_SIZE=32, the layout of the ctrlr0 register changes, moving the data frame format field from bits [3..0] to bits [16..20], and the RX/TX FIFO word size can be up to 32-bits. To support this new format, introduce the DW SPI capability flag DW_SPI_CAP_DFS32 to indicate that a controller is configured with SSI_MAX_XFER_SIZE=32. Since SSI_MAX_XFER_SIZE is a controller synthesis parameter not accessible through a register, the detection of this parameter value is done in spi_hw_init() by writing and reading the ctrlr0 register and testing the value of bits [3..0]. These bits are ignored (unchanged) for SSI_MAX_XFER_SIZE=16, allowing the detection. If a DFS32 capable SPI controller is detected, the new field dfs_offset in struct dw_spi is set to SPI_DFS32_OFFSET (16). dw_spi_update_config() is modified to set the data frame size field at the correct position is the CTRLR0 register, as indicated by the dfs_offset field of the dw_spi structure. The DW_SPI_CAP_DFS32 flag is also unconditionally set for SPI slave controllers, e.g. controllers that have the DW_SPI_CAP_DWC_SSI capability flag set. However, for these ssi controllers, the dfs_offset field is set to 0 as before (as per specifications). Finally, for any controller with the DW_SPI_CAP_DFS32 capability flag set, dw_spi_add_host() extends the value of bits_per_word_mask from 16-bits to 32-bits. dw_reader() and dw_writer() are also modified to handle 32-bits iTX/RX FIFO words. Suggested-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20201206011817.11700-3-damien.lemoal@wdc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controllerDamien Le Moal
Update the snps,dw-apb-ssi.yaml document to include the compatibility string "canaan,k210-spi" compatible string for the Canaan Kendryte K210 RISC-V SoC DW apb_ssi V4 SPI controller. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20201206011817.11700-2-damien.lemoal@wdc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: rt1015: check the return value of regmap_read during i2c probeDerek Fang
In some projects, the device ID register is not read correctly. This patch helps to verify the issue is caused from i2c host or client. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Add DAPM widget to set HP out to cap-less modePaul Cercueil
Cap-less mode is useful e.g. if the headphones are used as an antenna for a FM radio, so that the signal is not altered. For everything else, we want the cap-couple mode. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Don't change cap-couple setting in HP PMU/PMDPaul Cercueil
There is simply no reason to do that. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-4-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Adjust timeouts for cap-coupled outputsChristophe Branchereau
When using cap-coupled outputs, the RUP/RDO can take much longer than the 100ms timeout we used to have. Increase that timeout to one second. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Reset interrupt flags in bias PREPAREChristophe Branchereau
In case a poll for RUP times out, we might be left with some IRQ flags that should be cleared before the next power on. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz47xx: Use regmap_{set,clear}_bitsPaul Cercueil
Use regmap_{set,clear}_bits instead of regmap_update_bits, when applicable. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-1-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: soc-pcm: care trigger rollbackKuninori Morimoto
soc_pcm_trigger() calls DAI/Component/Link trigger, but some of them might be failed. static int soc_pcm_trigger(...) { ... switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ret = snd_soc_link_trigger(substream, cmd); if (ret < 0) break; (*) ret = snd_soc_pcm_component_trigger(substream, cmd); if (ret < 0) break; ret = snd_soc_pcm_dai_trigger(substream, cmd); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ret = snd_soc_pcm_dai_trigger(substream, cmd); if (ret < 0) break; ret = snd_soc_pcm_component_trigger(substream, cmd); if (ret < 0) break; ret = snd_soc_link_trigger(substream, cmd); break; } ... } For example, if soc_pcm_trigger() failed at (*) point, we need to rollback previous succeeded trigger. This patch adds trigger mark for DAI/Component/Link, and do STOP if START/RESUME/PAUSE_RELEASE were failed. Because it need to use new rollback parameter, we need to modify DAI/Component/Link trigger functions in the same time. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: soc-pcm: remove dpcm_do_trigger()Kuninori Morimoto
dpcm_be_dai_trigger() is calling dpcm_do_trigger() at each SNDRV_PCM_TRIGGER_xxx (1). int dpcm_be_dai_trigger(...) { for_each_dpcm_be(fe, stream, dpcm) { (B) ... switch (cmd) { case SNDRV_PCM_TRIGGER_START: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_RESUME: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_STOP: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_SUSPEND: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ... (1) ret = dpcm_do_trigger(...); ... } } } But it is just very verbose and duplicated function. Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B). And dev_err() (C) is not needed because soc_pcm_trigger() itself indicates error message when error. static int dpcm_do_trigger(...) { int ret; (A) dev_dbg(...); ret = soc_pcm_trigger(substream, cmd); if (ret < 0) (C) dev_err(...); return ret; } This patch replace dpcm_do_trigger() to soc_pcm_trigger(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: AMD Raven/Renoir - fix the PCI probe (PCI revision)Jaroslav Kysela
The Raven and Renoir ACP can be distinguished by the PCI revision. Let's do the check very early, otherwise the wrong probe code can be run. Link: https://lore.kernel.org/alsa-devel/2e4587f8-f602-cf23-4845-fd27a32b1cfc@amd.com/ Cc: <stable@kernel.org> Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20201208181233.2745726-1-perex@perex.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: max98390: Fix error codes in max98390_dsm_init()Dan Carpenter
These error paths return success but they should return -EINVAL. Fixes: 97ed3e509ee6 ("ASoC: max98390: Fix potential crash during param fw loading") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: Intel: bytcr_rt5640: Add quirk for ARCHOS Cesium 140Chris Chiu
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing, thus the heaset functions are not working. Add quirk for this model to select the correct input map, jack-detect options and channel map to enable jack sensing and headset microphone. This device uses IN1 for its internal MIC and JD2 for jack-detect. Signed-off-by: Chris Chiu <chiu@endlessos.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09dma-iommu: remove __iommu_dma_mmapChristoph Hellwig
The function has a single caller, so open code it there and take advantage of the precalculated page count variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20201209112019.2625029-1-hch@lst.de Signed-off-by: Will Deacon <will@kernel.org>
2020-12-09printk: remove logbuf_lock writer-protection of ringbufferJohn Ogness
Since the ringbuffer is lockless, there is no need for it to be protected by @logbuf_lock. Remove @logbuf_lock writer-protection of the ringbuffer. The reader-protection is not removed because some variables, used by readers, are using @logbuf_lock for synchronization: @syslog_seq, @syslog_time, @syslog_partial, @console_seq, struct kmsg_dumper. For PRINTK_NMI_DIRECT_CONTEXT_MASK, @logbuf_lock usage is not removed because it may be used for dumper synchronization. Without @logbuf_lock synchronization of vprintk_store() it is no longer possible to use the single static buffer for temporarily sprint'ing the message. Instead, use vsnprintf() to determine the length and perform the real vscnprintf() using the area reserved from the ringbuffer. This leads to suboptimal packing of the message data, but will result in less wasted storage than multiple per-cpu buffers to support lockless temporary sprint'ing. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201209004453.17720-3-john.ogness@linutronix.de
2020-12-09printk: inline log_output(),log_store() in vprintk_store()John Ogness
In preparation for removing logbuf_lock, inline log_output() and log_store() into vprintk_store(). This will simplify dealing with the various code branches and fallbacks that are possible. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201209004453.17720-2-john.ogness@linutronix.de
2020-12-09Merge remote-tracking branch 'origin/kvm-arm64/psci-relay' into ↵Marc Zyngier
kvmarm-master/next Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-12-09netfilter: nft_ct: Remove confirmation check for NFT_CT_IDBrett Mastbergen
Since commit 656c8e9cc1ba ("netfilter: conntrack: Use consistent ct id hash calculation") the ct id will not change from initialization to confirmation. Removing the confirmation check allows for things like adding an element to a 'typeof ct id' set in prerouting upon reception of the first packet of a new connection, and then being able to reference that set consistently both before and after the connection is confirmed. Fixes: 656c8e9cc1ba ("netfilter: conntrack: Use consistent ct id hash calculation") Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-09xen: don't use page->lru for ZONE_DEVICE memoryJuergen Gross
Commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") introduced usage of ZONE_DEVICE memory for foreign memory mappings. Unfortunately this collides with using page->lru for Xen backend private page caches. Fix that by using page->zone_device_data instead. Cc: <stable@vger.kernel.org> # 5.9 Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Reviewed-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-09xen: add helpers for caching grant mapping pagesJuergen Gross
Instead of having similar helpers in multiple backend drivers use common helpers for caching pages allocated via gnttab_alloc_pages(). Make use of those helpers in blkback and scsiback. Cc: <stable@vger.kernel.org> # 5.9 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-09gpiolib: cdev: Flag invalid GPIOs as usedMarc Zyngier
When reporting the state of a GPIO to userspace, we never check for the actual validity of the line, meaning we report invalid lines as being usable. A subsequent request will fail though, which is an inconsistent behaviour from a userspace perspective. Instead, let's check for the validity of the line and report it as used if it is invalid. This allows a tool such as gpioinfo to report something sensible: gpiochip3 - 4 lines: line 0: unnamed unused input active-high line 1: unnamed kernel input active-high [used] line 2: unnamed kernel input active-high [used] line 3: unnamed unused input active-high In this example, lines 1 and 2 are invalid, and cannot be used by userspace. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201204164739.781812-2-maz@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-09fs: quota: fix array-index-out-of-bounds bug by passing correct argument to ↵Anant Thazhemadam
vfs_cleanup_quota_inode() When dquot_resume() was last updated, the argument that got passed to vfs_cleanup_quota_inode was incorrectly set. If type = -1 and dquot_load_quota_sb() returns a negative value, then vfs_cleanup_quota_inode() gets called with -1 passed as an argument, and this leads to an array-index-out-of-bounds bug. Fix this issue by correctly passing the arguments. Fixes: ae45f07d47cc ("quota: Simplify dquot_resume()") Link: https://lore.kernel.org/r/20201208194338.7064-1-anant.thazhemadam@gmail.com Reported-by: syzbot+2643e825238d7aabb37f@syzkaller.appspotmail.com Tested-by: syzbot+2643e825238d7aabb37f@syzkaller.appspotmail.com CC: stable@vger.kernel.org Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2020-12-09module: delay kobject uevent until after module init callJessica Yu
Apparently there has been a longstanding race between udev/systemd and the module loader. Currently, the module loader sends a uevent right after sysfs initialization, but before the module calls its init function. However, some udev rules expect that the module has initialized already upon receiving the uevent. This race has been triggered recently (see link in references) in some systemd mount unit files. For instance, the configfs module creates the /sys/kernel/config mount point in its init function, however the module loader issues the uevent before this happens. sys-kernel-config.mount expects to be able to mount /sys/kernel/config upon receipt of the module loading uevent, but if the configfs module has not called its init function yet, then this directory will not exist and the mount unit fails. A similar situation exists for sys-fs-fuse-connections.mount, as the fuse sysfs mount point is created during the fuse module's init function. If udev is faster than module initialization then the mount unit would fail in a similar fashion. To fix this race, delay the module KOBJ_ADD uevent until after the module has finished calling its init routine. References: https://github.com/systemd/systemd/issues/17586 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-By: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
generated by cgit (git 2.34.1) at 2025-10-03 08:57:00 +0000