| Age | Commit message (Collapse) | Author |
|---|
|
As well as indexing helpers arm_smmu_cdtab_l1/2_idx().
Remove CTXDESC_L1_DESC_DWORDS and CTXDESC_CD_DWORDS replacing them all
with type specific calculations.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The top of the 2 level CD table is (at most) 1024 entries big, and two
high order allocations are required. One of __le64 which is programmed
into the HW (8k) and one of struct arm_smmu_l1_ctx_desc which holds the
CPU pointer (16k).
There are two copies of the l2ptr_dma, one is stored in the struct
arm_smmu_l1_ctx_desc, and another is encoded in the __le64 for the HW to
use. Instead of storing two copies just decode the value from the __le64.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The master->cd_table is entirely contained within the struct
arm_smmu_master which is guaranteed to be freed by the core code under
arm_smmu_release_device().
There is no reason to use devm here, arm_smmu_free_cd_tables() is reliably
called to free the CD related memory. Remove it and save some memory.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
These values can be computed from the other values already stored in the
config. Move the calculation to arm_smmu_write_strtab() and do it directly
before writing the registers.
This moves all the logic to calculate the two registers into one function
from three and saves an unimportant 16 bytes from the arm_smmu_device.
Suggested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The members here are being used for both the linear and the 2 level case,
with the meaning of each item slightly different in the two cases.
Split it into a clean union where both cases have their own struct with
their own logical names and correct types.
Adjust all the users to detect linear/2lvl and use the right sub structure
and types consistently.
Remove STRTAB_STE_DWORDS by changing the last places to use
sizeof(struct arm_smmu_ste).
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add types struct arm_smmu_strtab_l1 and l2 to represent the HW layout of
the descriptors, and use them in most places, following patches will get
the remaing places. The size of the l1 and l2 HW allocations are
sizeof(struct arm_smmu_strtab_l1/2).
This provides some more clarity than having raw __le64 *'s and sizes
computed via macros.
Remove STRTAB_L1_DESC_DWORDS.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Don't open code the calculations of the indexes for each level, provide
two functions to do that math and call them in all the places. Update all
the places computing indexes.
Calculate the L1 table size directly based on the max required index from
the cap. Remove STRTAB_L1_SZ_SHIFT in favour of STRTAB_NUM_L2_STES.
Use STRTAB_NUM_L2_STES to replace remaining open coded 1 << STRTAB_SPLIT.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Enable the MediaTek MT8365-EVK sound support.
The audio feature is handled by the MT8365 SoC and
the MT6357 PMIC codec audio.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20240226-audio-i350-v8-3-e80a57d026ce@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
scripts/Makefile.lib is included not only from scripts/Makefile.build
but also from scripts/Makefile.{modfinal,package,vmlinux,vmlinux_o},
where DT build rules are not required.
Split the DT build rules out to scripts/Makefile.dtbs, and include it
only when necessary.
While I was here, I added $(DT_TMP_SCHEMA) as a prerequisite of
$(multi-dtb-y).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add the sound node which is linked to the MT8365 SoC AFE and
the MT6357 audio codec.
Update the file header.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20240226-audio-i350-v8-5-e80a57d026ce@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add audio front end support of MT8365 SoC.
Update the file header.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20240226-audio-i350-v8-4-e80a57d026ce@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The DPI display interface feeds the external display pipeline. However
the pipeline representation is currently incomplete. Efforts are still
under way to come up with a way to represent the "creative" repurposing
of the DP bridge chip's internal output mux, which is meant to support
USB type-C orientation changes, to output to one of two type-C ports.
Until that is finalized, the external display can't be fully described,
and thus won't work. Even worse, the half complete graph potentially
confuses the OS, breaking the internal display as well.
Disable the external display interface across the whole Corsola family
until the DP / USB Type-C muxing graph binding is ready.
Reported-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Closes: https://lore.kernel.org/linux-mediatek/38a703a9-6efb-456a-a248-1dd3687e526d@gmail.com/
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240821042836.2631815-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add clock/irq/efuse setting in svs nodes for mt8186 SoC.
Signed-off-by: Rohit Agarwal <rohiagar@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240830084544.2898512-4-rohiagar@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add power domain phandle to the DPI controller in mediatek
mt8186 SoC.
Signed-off-by: Rohit Agarwal <rohiagar@chromium.org>
Link: https://lore.kernel.org/r/20240830084544.2898512-3-rohiagar@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
The clocks for dp_intf* device nodes are given in the wrong order,
causing the binding validation to fail.
Fixes: 6c2503b5856a ("arm64: dts: mt8195: Add dp-intf nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240802070951.1086616-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Add dpi node to mt8183.
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Link: https://lore.kernel.org/r/20240819120735.1508789-1-treapking@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
fill_pool() checks locklessly at the beginning whether the pool has to be
refilled. After that it checks locklessly in a loop whether the free list
contains objects and repeats the refill check.
If both conditions are true, it acquires the pool lock and tries to move
objects from the free list to the pool repeating the same checks again.
There are two redundant issues with that:
1) The repeated check for the fill condition
2) The loop processing
The repeated check is pointless as it was just established that fill is
required. The condition has to be re-evaluated under the lock anyway.
The loop processing is not required either because there is practically
zero chance that a repeated attempt will succeed if the checks under the
lock terminate the moving of objects.
Remove the redundant check and replace the loop with a simple if condition.
[ tglx: Massaged change log ]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240904133944.2124-4-thunder.leizhen@huawei.com
|
|
fill_pool() uses 'obj_pool_min_free' to decide whether objects should be
handed back to the kmem cache. But 'obj_pool_min_free' records the lowest
historical value of the number of objects in the object pool and not the
minimum number of objects which should be kept in the pool.
Use 'debug_objects_pool_min_level' instead, which holds the minimum number
which was scaled to the number of CPUs at boot time.
[ tglx: Massage change log ]
Fixes: d26bf5056fc0 ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()")
Fixes: 36c4ead6f6df ("debugobjects: Add global free list and the counter")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240904133944.2124-3-thunder.leizhen@huawei.com
|
|
1. Both debug_objects_pool_min_level and debug_objects_pool_size are
read-only after initialization, change attribute '__read_mostly' to
'__ro_after_init', and remove '__data_racy'.
2. Many global variables are read in the debug_stats_show() function, but
didn't mask KCSAN's detection. Add '__data_racy' for them.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240904133944.2124-2-thunder.leizhen@huawei.com
|
|
The PMU driver attempts to use PC_WRITE_RETIRED for the HW branch event,
if enabled. However, PC_WRITE_RETIRED counts only taken branches,
whereas BR_RETIRED counts also non-taken ones.
Furthermore, perf uses HW branch event to calculate branch misses ratio,
implying BR_RETIRED is the correct event to count.
We keep PC_WRITE_RETIRED still as an option in case BR_RETIRED isn't
implemented.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20240906191539.4847-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Qualcomm SDM630 / SDM660 platform requires the same kind of
workaround as MSM8998: some IOMMUs have context banks reserved by
firmware / TZ, touching those banks resets the board.
Apply the num_context_bank workaround to those two SMMU devices in order
to allow them to be used by Linux.
Fixes: b812834b5329 ("iommu: arm-smmu-qcom: Add sdm630/msm8998 compatibles for qcom quirks")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-1-e316055142f8@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Invoke the common PHY API to configure mode, speed, and submode. While
these functions are optional in the PHY interface, they are necessary for
certain PHY drivers. Lack of support for these functions in a PHY driver
does not cause harm.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-10-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add i.MX8Q PCIe "fsl,imx8q-pcie" compatible strings. clock-names align
DesignWare Cores (DWC) common naming convension.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-9-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Consolidated redundant if-checks pertaining to imx_pcie->phy. Instead of
two separate checks, merged them into one to improve code readability.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-8-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Improve comment about workaround ERR010728 by using official errata
document content, see:
https://www.nxp.com/webapp/Download?colCode=IMX7DS_2N09P
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-7-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Instead of using the switch case statement to assert/dassert the core
reset handled by this driver itself, let's introduce a new callback
core_reset() and define it for platforms that require it.
This simplifies the code.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Instead of using the switch case statement to enable/disable the
reference clock handled by this driver itself, let's introduce a new
callback enable_ref_clk() and define it for platforms that require it.
This simplifies the code.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-5-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Since this driver has evolved to support other i.MX SoCs such as
i.MX7/8/9, thus rename the 'imx6' prefix to 'imx' to avoid confusion.
The driver name is left unchanged to avoid breaking userspace.
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log, refactor the IMX_* macros]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Fix missing call to phy_power_off() in the error path of
imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy
as the PHY API already handles NULL pointers.
Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.1+
|
|
Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying
the correct hardware outbound alignment requirement.
The i.MX platform has a restriction about outbound address translation. The
pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX
platform to meet the hardware requirement, which is the same as inbound
address alignment.
Thus, align it with epc_features::align.
Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Cc: <stable@vger.kernel.org> # 6.9+
|
|
Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata.
This flag was overlooked during code restructuring. It is crucial to
release the app-reset from the System Reset Controller before initiating
LTSSM to rectify the issue.
Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9+
|
|
Given how the call place in pcie_wait_for_link_delay() got structured now,
and that pcie_retrain_link() returns a potentially useful error code,
convert pcie_failed_link_retrain() to return an error code rather than a
boolean status, fixing handling at the call site mentioned. Update the
other call site accordingly.
Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091156530.61955@angie.orcam.me.uk
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
|
|
In current implementation, test_and_set_bit_lock() is used to mediate
concurrent calls of ohci_flush_iso_completions(). However, the ad-hoc
usage of atomic operations is not preferable.
This commit uses mutex_trylock() as the similar operations. The core
function is responsible for the mediation, instead of 1394 OHCI driver.
Link: https://lore.kernel.org/r/20240909140018.65289-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
In current implementation, the work item for isochronous context executes
the same procedure of fw_iso_context_flush_completions() internally. There
is a space to refactor the implementation.
This commit calls fw_iso_context_flush_completions() in the work item. It
obsoletes fw_iso_context_init_work(). It also obsoletes a pair of
disable_work_sync() and enable_work() since the usage of
test_and_set_bit_lock() mediates concurrent call already.
Link: https://lore.kernel.org/r/20240909140018.65289-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Only return successful completion status from pcie_failed_link_retrain() if
retraining has actually been done, preventing excessive delays from being
triggered at call sites in a hope that communication will finally be
established with the downstream device where in fact nothing has been done
about the link in question that would justify such a hope.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133260.61955@angie.orcam.me.uk
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
|
|
When `pcie_failed_link_retrain' has failed to retrain the link by hand
it leaves the link speed restricted to 2.5GT/s, which will then affect
any device that has been plugged in later on, which may not suffer from
the problem that caused the speed restriction to have been attempted.
Consequently such a downstream device will suffer from an unnecessary
communication throughput limitation and therefore performance loss.
Remove the speed restriction then and revert the Link Control 2 register
to its original state if link retraining with the speed restriction in
place has failed. Retrain the link again afterwards so as to remove any
residual state, waiting on LT rather than DLLLA to avoid an excessive
delay and ignoring the result as this training is supposed to fail
anyway.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2408251412590.30766@angie.orcam.me.uk
Reported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
|
|
The azx_bus->dma_type is referred only for allocating the
communication buffers like CORB/RIRB, and the allocation size is
small. Hence it doesn't have to be S/G buffer allocation, which is an
obvious overkill. Use the standard SNDRV_DMA_TYPE_DEV_WC instead.
This was changed to SNDRV_DMA_TYPE_DEV_WC_SG in the commit
37137ec26c2c ("ALSA: hda: Once again fix regression of page
allocations with IOMMU") as a workaround for IOMMU-backed
allocations. But this is no longer needed since the allocation with
SNDRV_DMA_TYPE_DEV_WC itself was fixed in the commit 9c27301342a5
("ALSA: memalloc: Use DMA API for x86 WC page allocations, too").
So this patch reverts the previous workaround in this piece of code.
Link: https://patch.msgid.link/20240909134744.25426-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The LBMS bit, where implemented, is set by hardware either in response
to the completion of retraining caused by writing 1 to the Retrain Link
bit or whenever hardware has changed the link speed or width in attempt
to correct unreliable link operation. It is never cleared by hardware
other than by software writing 1 to the bit position in the Link Status
register and we never do such a write.
We currently have two places, namely apply_bad_link_workaround() and
pcie_failed_link_retrain() in drivers/pci/controller/dwc/pcie-tegra194.c
and drivers/pci/quirks.c respectively where we check the state of the LBMS
bit and neither is interested in the state of the bit resulting from the
completion of retraining, both check for a link fault.
And in particular pcie_failed_link_retrain() causes issues consequently, by
trying to retrain a link where there's no downstream device anymore and the
state of 1 in the LBMS bit has been retained from when there was a device
downstream that has since been removed.
Clear the LBMS bit then at the conclusion of pcie_retrain_link(), so that
we have a single place that controls it and that our code can track link
speed or width changes resulting from unreliable link operation.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133140.61955@angie.orcam.me.uk
Reported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
|
|
Add the __counted_by compiler attribute to the flexible array members
devs to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Increment nr_devs before adding a new device to the devs array and
adjust the array indexes accordingly. Add a helper macro for adding a
new device.
In bch2_journal_read(), explicitly set nr_devs to 0.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We enable idmapped mounts for bcachefs. Here, we just pass down
the user_namespace argument from the VFS methods to the relevant
helpers.
The idmap test in bcachefs is as following:
```
1. losetup /dev/loop1 bcachefs.img
2. ./bcachefs format /dev/loop1
3. mount -t bcachefs /dev/loop1 /mnt/bcachefs/
4. ./mount-idmapped --map-mount b:0:1000:1 /mnt/bcachefs /mnt/idmapped1/
ll /mnt/bcachefs
total 2
drwx------. 2 root root 0 Jun 14 14:10 lost+found
-rw-r--r--. 1 root root 1945 Jun 14 14:12 profile
ll /mnt/idmapped1/
total 2
drwx------. 2 1000 1000 0 Jun 14 14:10 lost+found
-rw-r--r--. 1 1000 1000 1945 Jun 14 14:12 profile
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add the __counted_by compiler attribute to the flexible array member
x_name to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A user with a 30 tb device is overflowing the INT_MAX limit on vmalloc
allocations...
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
better memory allocation profiling support
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Use jiffies macros instead of using jiffies directly to handle wraparound.
Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_bset_fix_lookup_table is too complicated to be easily understood,
the comment "l now > where" there is also incorrect when where ==
t->end_offset. This patch therefore refactor the function, the idea is
that when where >= rw_aux_tree(b, t)[t->size - 1].offset, we don't need
to adjust the rw aux tree.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We rely on the trans->locked to know if a trans has nodes locked for
assertions about deadlocks; there can't be more than one trans in the
same process that is locked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
folio_has_private() is an attractive nuisance; filesystem authors
generally don't realise that it actually checks two flags (one of which
is never set by bcachefs). There's no need to check the private flag at
all; for folios owned by bcachefs, we know that folio->private is NULL
when the private flag is clear and non-NULL when the private flag is set.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's really not needed: the only locks used here are the btree cache
lock, which we drop for GFP_WAIT allocations, and btree node locks - but
we also drop those for GFP_WAIT allocations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Use helper functions to make code more readable.
Similar to commit a5488f29835c ("fs: simplify ->listxattr() implementation")
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
