summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-07spi/imx: correct the test on platform_get_irq() return valueRichard Genoud
The test "if (spi_imx->irq <= 0)" is not testing the IRQ value, but the return value of platform_get_irq(). As platform_get_irq() can return an error (-ENXIO) or the IRQ value it found, the test should be "if (spi_imx->irq < 0)" [grant.likely: Note: In general, Linux irq number 0 should also mean no irq, but arm still allows devices to be assigned 0, and the imx platform uses 0 for one of the spi devices, so this patch is needed for the device to work] Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-07Merge branch 'vfs-scale-working' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
2011-01-07x86: Save rbp in pt_regs on irq entryFrederic Weisbecker
From the x86_64 low level interrupt handlers, the frame pointer is saved right after the partial pt_regs frame. rbp is not supposed to be part of the irq partial saved registers, but it only requires to extend the pt_regs frame by 8 bytes to do so, plus a tiny stack offset fixup on irq exit. This changes a bit the semantics or get_irq_entry() that is supposed to provide only the value of caller saved registers and the cpu saved frame. However it's a win for unwinders that can walk through stack frames on top of get_irq_regs() snapshots. A noticeable impact is that it makes perf events cpu-clock and task-clock events based callchains working on x86_64. Let's then save rbp into the irq pt_regs. As a result with: perf record -e cpu-clock perf bench sched messaging perf report --stdio Before: 20.94% perf [kernel.kallsyms] [k] lock_acquire | --- lock_acquire | |--44.01%-- __write_nocancel | |--43.18%-- __read | |--6.08%-- fork | create_worker | |--0.88%-- _dl_fixup | |--0.65%-- do_lookup_x | |--0.53%-- __GI___libc_read --4.67%-- [...] After: 19.23% perf [kernel.kallsyms] [k] __lock_acquire | --- __lock_acquire | |--97.74%-- lock_acquire | | | |--21.82%-- _raw_spin_lock | | | | | |--37.26%-- unix_stream_recvmsg | | | sock_aio_read | | | do_sync_read | | | vfs_read | | | sys_read | | | system_call | | | __read | | | | | |--24.09%-- unix_stream_sendmsg | | | sock_aio_write | | | do_sync_write | | | vfs_write | | | sys_write | | | system_call | | | __write_nocancel v2: Fix cfi annotations. Reported-by: Soeren Sandmann Pedersen <sandmann@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Jan Beulich <JBeulich@novell.com>
2011-01-07x86, dumpstack: Fix unused variable warningRakib Mullick
In dump_stack function, bp isn't used anymore, which is introduced by commit 9c0729dc8062bed96189bd14ac6d4920f3958743. This patch removes bp completely. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Soeren Sandmann <sandmann@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <AANLkTik9U_Z0WSZ7YjrykER_pBUfPDdgUUmtYx=R74nL@mail.gmail.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2011-01-07deb-pkg: Make deb-pkg generate a seperate linux-libc-dev debmaximilian attems
userland dev likes latest incarnation of that userland API. make it easy to also build it on make deb-pkg invocation: dpkg-deb: building package `linux-libc-dev' in `../linux-libc-dev_2.6.32-rc6-4_amd64.deb'. Last year patch rebased on top of latest deb-pkg changes. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07xen: HVM X2APIC supportSheng Yang
This patch is similiar to Gleb Natapov's patch for KVM, which enable the hypervisor to emulate x2apic feature for the guest. By this way, the emulation of lapic would be simpler with x2apic interface(MSR), and faster. [v2: Re-organized 'xen_hvm_need_lapic' per Ian Campbell suggestion] Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-07apic: Move hypervisor detection of x2apic to hypervisor.hSheng Yang
Then we can reuse it for Xen later. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Avi Kivity <avi@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-07sched: Constify function scope static struct sched_param usagePeter Zijlstra
Function-scope statics are discouraged because they are easily overlooked and can cause subtle bugs/races due to their global (non-SMP safe) nature. Linus noticed that we did this for sched_param - at minimum make the const. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Fix strncmp operationHillf Danton
One of the operands, buf, is incorrect, since it is stripped and the correct address for subsequent string comparing could change if leading white spaces, if any, are removed from buf. It is fixed by replacing buf with cmp. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTinOPuYsVovrZpbuCCmG5deEyc8WgA_A1RJx_YK7@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Move sched_autogroup_exit() to free_signal_struct()Mike Galbraith
Per Oleg's suggestion, undo fork failure free/put_signal_struct change, and move sched_autogroup_exit() to free_signal_struct() instead. Signed-off-by: Mike Galbraith <efault@gmx.de> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294222564.8369.6.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Fix struct autogroup memory leakMike Galbraith
Seems I lost a change somewhere, leaking memory. sched: fix struct autogroup memory leak Add missing change to actually use autogroup_free(). Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294222285.8369.2.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Mark autogroup_init() __initYong Zhang
autogroup_init() is only called at boot time. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294375425-31065-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07sched: Consolidate the name of root_task_group and init_task_groupYong Zhang
root_task_group is the leftover of USER_SCHED, now it's always same to init_task_group. But as Mike suggested, root_task_group is maybe the suitable name to keep for a tree. So in this patch: init_task_group --> root_task_group init_task_group_load --> root_task_group_load INIT_TASK_GROUP_LOAD --> ROOT_TASK_GROUP_LOAD Suggested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110107071736.GA32635@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07nconf: handle comment entries within choice/endchoicePeter Korsgaard
Equivalent to af6c1598 (kconfig: handle comment entries within choice/endchoice), but for nconfig instead. Implement support for comment entries within choice groups. Comment entries are displayed visually distinct from normal configs, and selecting them is a no-op. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07x86, NMI: Clean-up default_do_nmi()Don Zickus
Just re-arrange the code a bit to make it easier to follow what is going on. Basically un-negating the if-statement and swapping the code inside the if-statement with code outside. No functional changes. Originally-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Allow NMI reason io port (0x61) to be processed on any CPUDon Zickus
In original NMI handler, NMI reason io port (0x61) is only processed on BSP. This makes it impossible to hot-remove BSP. To solve the issue, a raw spinlock is used to allow the port to be processed on any CPU. Originally-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Remove DIE_NMI_IPIDon Zickus
With priorities in place and no one really understanding the difference between DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI. This also simplifies default_do_nmi() a little bit. Instead of calling the die_notifier in both the if and else part, just pull it out and call it before the if-statement. This has the side benefit of avoiding a call to the ioport to see if there is an external NMI sitting around until after the (more frequent) internal NMIs are dealt with. Patch-Inspired-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add priorities to handlersDon Zickus
In order to consolidate the NMI die_chain events, we need to setup the priorities for the die notifiers. I started by defining a bunch of common priorities that can be used by the notifier blocks. Then I modified the notifier blocks to use the newly created priorities. Now that the priorities are straightened out, it should be easier to remove the event DIE_NMI_IPI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86: Convert some devices to use DIE_NMIUNKNOWNDon Zickus
They are a handful of places in the code that register a die_notifier as a catch all in case no claims the NMI. Unfortunately, they trigger on events like DIE_NMI and DIE_NMI_IPI, which depending on when they registered may collide with other handlers that have the ability to determine if the NMI is theirs or not. The function unknown_nmi_error() makes one last effort to walk the die_chain when no one else has claimed the NMI before spitting out messages that the NMI is unknown. This is a better spot for these devices to execute any code without colliding with the other handlers. The two drivers modified are only compiled on x86 arches I believe, so they shouldn't be affected by other arches that may not have DIE_NMIUNKNOWN defined. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Russ Anderson <rja@sgi.com> Cc: Corey Minyard <minyard@acm.org> Cc: openipmi-developer@lists.sourceforge.net Cc: dann frazier <dannf@hp.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, NMI: Add NMI symbol constants and rename memory parity to PCI SERRHuang Ying
Replace the NMI related magic numbers with symbol constants. Memory parity error is only valid for IBM PC-AT, newer machine use bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually reported via MCE. So corresponding function name and kernel log string is changed. But on some machines, PCI SERR line is still used to report memory errors. This is used by EDAC, so corresponding EDAC call is reserved. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07perf_events: Add perf_event_time()Stephane Eranian
Adds perf_event_time() to try and centralize access to event timing and in particular ctx->time. Prepares for cgroup support. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07perf_events: Generalize use of event_filter_match()Stephane Eranian
Replace all occurrences of: event->cpu != -1 && event->cpu == smp_processor_id() by a call to: event_filter_match(event) This makes the code more consistent and will make the cgroup patch smaller. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07perf_events: Move code around to prepare for cgroupStephane Eranian
In particular this patch move perf_event_exit_task() before cgroup_exit() to allow for cgroup support. The cgroup_exit() function detaches the cgroups attached to a task. Other movements include hoisting some definitions and inlines at the top of perf_event.c Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07mkuboot.sh: Fail if mkimage is missingRoland Stigge
on building an uImage, I get: $ make uImage CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CHK include/generated/compile.h Kernel: arch/arm/boot/Image is ready SHIPPED arch/arm/boot/compressed/lib1funcs.S AS arch/arm/boot/compressed/lib1funcs.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready UIMAGE arch/arm/boot/uImage "mkimage" command not found - U-Boot images will not be built Image arch/arm/boot/uImage is ready $ I.e. it says: "uImage is ready" even though the uImage file doesn't exist because mkimage is missing. I propose the attached patch. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07drm/nouveau: fix hwmon device bindingLucas Stach
Bind the hwmon structs to nouveau device kobj. This makes sure the hwmon files are created in the device subdir in line with all other hwmon drivers. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07Merge branch 'linus' into x86/apic-cleanupsIngo Molnar
Conflicts: arch/x86/include/asm/io_apic.h Merge reason: Resolve the conflict, update to a more recent -rc base Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07x86, numa: Fix CONFIG_DEBUG_PER_CPU_MAPS without NUMA emulationDavid Rientjes
"x86, numa: Fake node-to-cpumask for NUMA emulation" broke the build when CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU is not. This is because it is possible to map a cpu to multiple nodes when NUMA emulation is used; the patch required a physical node address table to find those nodes that was only available when CONFIG_NUMA_EMU was enabled. This extracts the common debug functionality to its own function for CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether CONFIG_NUMA_EMU is set or not. NUMA emulation will now iterate over the set of possible nodes for each cpu and call the new debug function whereas only the cpu's node will be used without NUMA emulation enabled. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <alpine.DEB.2.00.1012301053590.12995@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07m68knommu: Need to check __get_user()/__put_user() resultAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: signal.c __user annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Equivalent of "m68k: handle new gcc's"Al Viro
... from back in 2004; again, it's ifdefed out by CONFIG_FPU. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: f_pcr has been gone since headers' mergeAl Viro
sure, it's effectively ifdefed out, but still... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Don't lose state if sigframe setup failsAl Viro
exact parallel to m68k analog Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Handle multiple pending signalsAl Viro
we shouldn't bugger off to userland when there still are pending signals; among other things it makes e.g. SIGSEGV triggered by failure to build a sigframe to be delivered _now_ and not when we hit the next syscall or interrupt. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Switch to saner sigsuspendAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68knommu: Don't bother with SA_ONESHOTAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Check __get_user()/__put_user() return valueAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Missing syscall_trace() on sigreturnAl Viro
If we leave sigreturn via ret_from_signal, we end up with syscall trace only on entry, leading to very unhappy strace, among other things. Note that this means different behaviours for signals delivered while we were in pagefault and for ones delivered while we were in interrupt... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Fix stack mangling logics in sigreturnAl Viro
a) we should hold modifying regs->format until we know we *will* be doing stack expansion; otherwise attacker can modify sigframe to have wrong ->sc_formatvec and install SIGSEGV handler. b) we should *not* mix copying saved extra stuff from userland with expanding the stack; once we'd done that manual memmove, we'd better not return to C, so cleanup is very hard to do. The easiest way is to copy it on stack first, making sure we won't overwrite on stack expansion. Fortunately that's easy to do... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: If we fail to set sigframe up, just leave regs alone...Al Viro
Same principle as with the previous patch - do not destroy the state if sigframe setup fails. Incidentally, it's actually _less_ work - we don't need to go through adjust_stack dance on failure if we don't touch regs->stkadj until we know we'd written sigframe out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Don't lose state if sigframe setup failsAl Viro
If we'd failed in setup_frame(), we've no place to store the original sigmask. It's not an unrecoverable situation - we raise SIGSEGV, but that SIGSEGV might be successfully handled (e.g. on altstack). In that case we really don't want sa_mask of original signal permanently slapped on the set of blocked signals. Standard solution: have setup_frame()/setup_rt_frame() report failure and don't mess with the signal-related state if that has happened... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Simplify the singlestepping handling in signalsAl Viro
Instead of checking the return value of do_signal() we can just do the work (raise SIGTRAP and clear SR.T1) directly in handle_signal(), when setting the sigframe up. Simplifies the assembler glue and is closer to the way we do it on other targets. Note that do_delayed_trace does *not* disappear; it's still needed to deal with single-stepping through syscall, since 68040 doesn't raise the trace exception at all if the trap exception is pending. We hit it after returning from sys_...() if TIF_DELAYED_TRACE is set; all that has changed is that we don't reuse it for "single-step into the handler" codepath. As the result, do_signal() doesn't need to return anything anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07m68k: Switch to saner sigsuspend()Al Viro
and saner do_signal() arguments, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07x86, AMD, PCI: Add AMD northbridge PCI device id for CPU families 12h and 14hRobert Richter
This patch adds the PCI northbridge device id for AMD CPU families 12h and 14h. Both families have implemented the same PCI northbridge device. There are some future use cases that use this PCI device and we would like to clarify its naming. Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: xen-devel@lists.xensource.com <xen-devel@lists.xensource.com> Cc: Keir Fraser <keir@xen.org> Cc: Jan Beulich <JBeulich@novell.com> LKML-Reference: <20110106165107.GL4739@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07m68k: Resetting sa_handler in local copy of k_sigaction is pointlessAl Viro
... and had been such since the introduction of get_signal_to_deliver() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07dccp: make upper bound for seq_window consistent on 32/64 bitGerrit Renker
The 'seq_window' sysctl sets the initial value for the DCCP Sequence Window, which may range from 32..2^46-1 (RFC 4340, 7.5.2). The patch sets the upper bound consistently to 2^32-1 on both 32 and 64 bit systems, which should be sufficient - with a RTT of 1sec and 1-byte packets, a seq_window of 2^32-1 corresponds to a link speed of 34 Gbps. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-01-07dccp: fix bug in updating the GSRSamuel Jero
Currently dccp_check_seqno allows any valid packet to update the Greatest Sequence Number Received, even if that packet's sequence number is less than the current GSR. This patch adds a check to make sure that the new packet's sequence number is greater than GSR. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-01-07dccp: fix return value for sequence-invalid packetsSamuel Jero
Currently dccp_check_seqno returns 0 (indicating a valid packet) if the acknowledgment number is out of bounds and the sync that RFC 4340 mandates at this point is currently being rate-limited. This function should return -1, indicating an invalid packet. Signed-off-by: Samuel Jero <sj323707@ohio.edu> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
2011-01-07EDAC, MCE: Fix NB error formattingBorislav Petkov
Minor formatting fixup since the information which core was associated with the MCE is not always valid. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bitRandy Dunlap
Building for X86_32 produces shift count warnings, so use BIT_64() to eliminate the warnings. drivers/edac/mce_amd.c:778: warning: left shift count >= width of type drivers/edac/mce_amd.c:778: warning: left shift count >= width of type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: bluesmoke-devel@lists.sourceforge.net Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Enable MCE decoding on F15hBorislav Petkov
Now that everything is inplace, enable MCE decoding on F15h. Make initcall routine a bit more readable. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
generated by cgit (git 2.34.1) at 2025-09-20 23:31:52 +0000