summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-07ACPI: Use ioremap_cache()Len Brown
Although the temporary boot-time ACPI table mappings were set up with CPU caching enabled, the permanent table mappings and AML run-time region memory accesses were set up with ioremap(), which on x86 is a synonym for ioremap_nocache(). Changing this to ioremap_cache() improves performance as seen when accessing the tables via acpidump, or /sys/firmware/acpi/tables. It should also improve AML run-time performance. No change on ia64. Reported-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-01-07ACPI / PM: Make suspend_nvs_save() use acpi_os_map_memory()Rafael J. Wysocki
It turns out that the NVS memory region that suspend_nvs_save() attempts to map has been already mapped by acpi_os_map_memory(), so suspend_nvs_save() should better use acpi_os_map_memory() for mapping memory to avoid conflicts. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07ACPI / PM: Update file information and the list of includes in nvs.cRafael J. Wysocki
The file information and the list of include in drivers/acpi/nvs.c are outdated, so update them. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07PM / ACPI: Move NVS saving and restoring code to drivers/acpiRafael J. Wysocki
The saving of the ACPI NVS area during hibernation and suspend and restoring it during the subsequent resume is entirely specific to ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS configuration option which is redundant. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07radeon: consolidate asic-specific function decls for pre-r600Daniel Vetter
Move them to radeon_asic.h together with the other asic specific stuff. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07vga_switcheroo: comparing too few characters in strncmp()Dan Carpenter
This is a copy-and-paste bug. We should be comparing 4 characters here instead of 3. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07PM: Fix oops in suspend/hibernate code related to failing ioremap()Jiri Slaby
When ioremap() fails (which might happen for some reason), we nicely oops in suspend_nvs_save() due to NULL dereference by memcpy() in there. Fail gracefully instead. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-07drm/radeon/kms: add NI pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: don't enable pcie gen2 on NI yetAlex Deucher
Still needs to be implemented. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add radeon_asic struct for NI asicsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms/ni: load default sclk/mclk/vddc at pm initAlex Deucher
The vbios only partially initializes the memory controller on NI, so now we need to load the MC ucode in the driver and set the default clocks once the ucode is loaded. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add ucode loader for NIAlex Deucher
The MC ucode is no longer loaded by the vbios tables as on previous asics. It now must be loaded by the driver. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for DCE5 display LUTsAlex Deucher
The hardware supports advanced user defined color management but at the moment, there is no infrastructure in place to take advantage of it so for now we just support the legacy LUTs. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add ni_reg.hAlex Deucher
This adds some new NI (northern islands) specific display register defines. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add bo blit support for NIAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: always use writeback/events for fences on NIAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5Alex Deucher
NI chips no longer load the MC ucode in the asic_init sequence so the asic comes up in a basic mode with low engine/memory clocks and a voltage. Once the MC ucode is loaded by the driver the card can be programmed to it's proper default clocks and voltage. As such the default clocks in the firmware info table as the post clocks, not the default running clocks. Track the default post clocks and default running clocks separately to handle this. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add backend map workaround for bartsAlex Deucher
Same as Cypress. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: fill gpu init for NI asicsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add disabled vbios accessor for NI asicsAlex Deucher
Some systems disable the vbios on secondary cards or cards that have been posted. This code re-enabled the vbios so the driver can load it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: handle NI thermal controllerAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: parse DCE5 encoder caps when setting up encodersAlex Deucher
Needed to tell which DIG encoders are HBR2 capable for DP 1.2. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dvo dpms updates for DCE5Alex Deucher
The DVOOutputControl table was removed for DCE5. DVOEncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dac dpms updates for DCE5Alex Deucher
The DAC1OutputControl table was removed for DCE5. DAC1EncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom dig encoder updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom transmitter control updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom spread spectrum updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom SetPixelClock updatesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 supports 16k display surfacesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: update display watermark calculations for DCE5Alex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add NI chip familiesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: clean up ASIC_IS_DCE41() macroAlex Deucher
only fusion asics are dce4.1 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: fix some typos in evergreen pm4 definesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: set the MSB of the HDP slice sizeAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for gen2 pcie link speedsAlex Deucher
Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add pcie get/set lane support for r6xx/r7xx/evergreenAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/nouveau: create grctx on the fly on all chipsetsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07hwrng: via_rng - Fix memory scribbling on some CPUsHerbert Xu
It has been reported that on at least one Nano CPU the xstore instruction will write as many as 16 bytes of data to the output buffer. This causes memory corruption as we use rng->priv which is only 4-8 bytes long. This patch fixes this by using an intermediate buffer on the stack with at least 16 bytes and aligned to a 16-byte boundary. The problem was observed on the following processor: processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 15 model name : VIA Nano processor U2250 (1.6GHz Capable) stepping : 3 cpu MHz : 1600.000 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush acpi mmx fxsr sse sse2 ss tm syscall nx lm constant_tsc up rep_good pni monitor vmx est tm2 ssse3 cx16 xtpr rng rng_en ace ace_en ace2 phe phe_en lahf_lm bogomips : 3192.08 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Tested-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-07crypto: padlock - Move padlock.h into include/cryptoHerbert Xu
This patch moves padlock.h from drivers/crypto into include/crypto so that it may be used by the via-rng driver. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-07hwrng: via_rng - Fix asm constraintsHerbert Xu
The inline asm to invoke xstore did not specify the constraints correctly. In particular, dx/di should have been marked as output registers as well as input as they're modified by xstore. Thanks to Mario Holbe for creating this patch and testing it. Tested-by: Mario 'BitKoenig' Holbe <Mario.Holbe@TU-Ilmenau.DE> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-01-07drm: Update fbdev fb_fix_screeninfoJames Simmons
If you change the color depth via fbset or some other framebuffer aware userland application struct fb_fix_screeninfo is not updated to this new information. This patch fixes this issue. Also the function is changed to just pass in struct drm_framebuffer so in the future we could use more fields. I'm hoping some day fix->smem* could be set here :-) Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07perf tools: Pass whole attr to event selectorsLin Ming
Since commit 69aad6f1(perf tools: Introduce event selectors), only perf_event_attr::type and ::config are passed to event selector, which makes perf tool not work correctly. For example, PEBS does not work because perf_event_attr::precise_ip is not passed to the syscall. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-06Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
2011-01-07ARM: mach-shmobile: update for SMP changes.Paul Mundt
There have likewise been some API updates, so we refactor to use the consolidated smp_prepare_cpus(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: update for GIC changes.Paul Mundt
This fixes up the SMP support to use the refactored GIC APIs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07ARM: mach-shmobile: Fix up clkdev fallout for SH73A0.Paul Mundt
Use the new linux/clkdev.h to get it building again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-06Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits) [media] radio-aimslab.c: Fix gcc 4.5+ bug [media] cx25821: Fix compilation breakage due to BKL dependency [media] v4l2-compat-ioctl32: fix compile warning [media] zoran: fix compiler warning [media] tda18218: fix compile warning [media] ngene: fix compile warning [media] DVB: IR support for TechnoTrend CT-3650 [media] cx23885, cimax2.c: Fix case of two CAM insertion irq [media] ir-nec-decoder: fix repeat key issue [media] staging: se401 depends on USB [media] staging: usbvideo/vicam depends on USB [media] soc_camera: Add the ability to bind regulators to soc_camedra devices [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor [media] v4l: soc-camera: switch to .unlocked_ioctl [media] v4l: ov772x: simplify pointer dereference [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving [media] ov9640: use macro to request OmniVision OV9640 sensor private data [media] ivtv-i2c: Fix two warnings [media] staging/lirc: Update lirc TODO files [media] cx88: Remove the obsolete i2c_adapter.id field ...
2011-01-07sh: mach-sdk7786: Fix up fallout from clkdev consolidation.Paul Mundt
CC arch/sh/boards/mach-sdk7786/setup.o arch/sh/boards/mach-sdk7786/setup.c:179: error: variable 'sdk7786_pcie_cl' has initializer but incomplete type arch/sh/boards/mach-sdk7786/setup.c:180: error: unknown field 'con_id' specified in initializer arch/sh/boards/mach-sdk7786/setup.c:180: warning: excess elements in struct initializer arch/sh/boards/mach-sdk7786/setup.c:180: warning: (near initialization for 'sdk7786_pcie_cl') arch/sh/boards/mach-sdk7786/setup.c:181: error: unknown field 'clk' specified in initializer arch/sh/boards/mach-sdk7786/setup.c:181: warning: excess elements in struct initializer arch/sh/boards/mach-sdk7786/setup.c:181: warning: (near initialization for 'sdk7786_pcie_cl') arch/sh/boards/mach-sdk7786/setup.c: In function 'sdk7786_clk_init': arch/sh/boards/mach-sdk7786/setup.c:211: error: implicit declaration of function 'clkdev_add' which is a fanciful way of saying that the struct definition moved from asm/clkdev.h to linux/clkdev.h. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07Merge branch 'common/dma' into rmobile-latestPaul Mundt
2011-01-07dma: shdma: don't register the global die notifier multiple timesGuennadi Liakhovetski
A recent patch has added a die notifier to the shdma driver, however, it registers a static die-notifier object in the probe routine, i.e., for each device instance. This is wrong and leads to a system lockup. This patch moves the die notifier registration to module init and exit routines respectively. Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit (git 2.34.1) at 2025-09-22 10:34:22 +0000