summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-28can: c_can: don't cache TX messages for C_CAN coresMarc Kleine-Budde
As Jacob noticed, the optimization introduced in 387da6bc7a82 ("can: c_can: cache frames to operate as a true FIFO") doesn't properly work on C_CAN, but on D_CAN IP cores. The exact reasons are still unknown. For now disable caching if CAN frames in the TX path for C_CAN cores. Fixes: 387da6bc7a82 ("can: c_can: cache frames to operate as a true FIFO") Link: https://lore.kernel.org/all/20220928083354.1062321-1-mkl@pengutronix.de Link: https://lore.kernel.org/all/15a8084b-9617-2da1-6704-d7e39d60643b@gmail.com Reported-by: Jacob Kroon <jacob.kroon@gmail.com> Tested-by: Jacob Kroon <jacob.kroon@gmail.com> Cc: stable@vger.kernel.org # v5.15 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-09-28mmc: Merge branch fixes into nextUlf Hansson
Merge the mmc fixes for v6.0rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.1. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-28mmc: sdhci: Centralize CMD and DATA reset handlingAdrian Hunter
Centralize CMD and DATA reset handling so that is more obvious how reset is handled in different situations. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-5-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-28mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOSAdrian Hunter
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS is used by only ENE controllers but can be replaced by driver code. Amend the ENE code to hook the ->set_ios() mmc host operation and do the reset there. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-28mmc: sdhci: Remove misleading comment about resetsAdrian Hunter
In SDHCI specification section 3.10.1 Error Interrupt Recovery, the flow chart shows Software Reset for CMD separately and before Software Reset for DAT, so the comment "Spec says we should do both at the same time" is not correct. Remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-28mmc: sdhci: Separate out sdhci_reset_for_all()Adrian Hunter
Tidy sdhci_do_reset() slightly by separating out sdhci_reset_for_all() which removes the need to test the mask in sdhci_do_reset(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-28Merge branch 'tc-testing-qdisc'David S. Miller
Zhengchao Shao says: ==================== net: add tc-testing qdisc test cases For this patchset, test cases of the qdisc modules are added to the tc-testing test suite. Last, thanks to Victor for testing and suggestion. After a test case is added locally, the test result is as follows: ./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats ./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting ./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting ./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle ./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting ./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class ./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class ./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle ./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting ./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class ./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class ./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class ./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device ./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class ./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats --- v3: add config v2: modify subject prefix ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for teql qdiscZhengchao Shao
Test 84a0: Create TEQL with default setting Test 7734: Create TEQL with multiple device Test 34a9: Delete TEQL with valid handle Test 6289: Show TEQL stats Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for tbf qdiscZhengchao Shao
Test 6430: Create TBF with default setting Test 0518: Create TBF with mtu setting Test 320a: Create TBF with peakrate setting Test 239b: Create TBF with latency setting Test c975: Create TBF with overhead setting Test 948c: Create TBF with linklayer setting Test 3549: Replace TBF with mtu Test f948: Change TBF with latency time Test 2348: Show TBF class Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for taprio qdiscZhengchao Shao
Test ba39: Add taprio Qdisc to multi-queue device (8 queues) Test 9462: Add taprio Qdisc with multiple sched-entry Test 8d92: Add taprio Qdisc with txtime-delay Test d092: Delete taprio Qdisc with valid handle Test 8471: Show taprio class Test 0a85: Add taprio Qdisc to single-queue device Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for skbprio qdiscZhengchao Shao
Test 283e: Create skbprio with default setting Test c086: Create skbprio with limit setting Test 6733: Change skbprio with limit setting Test 2958: Show skbprio class Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for sfq qdiscZhengchao Shao
Test 7482: Create SFQ with default setting Test c186: Create SFQ with limit setting Test ae23: Create SFQ with perturb setting Test a430: Create SFQ with quantum setting Test 4539: Create SFQ with divisor setting Test b089: Create SFQ with flows setting Test 99a0: Create SFQ with depth setting Test 7389: Create SFQ with headdrop setting Test 6472: Create SFQ with redflowlimit setting Test 8929: Show SFQ class Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for sfb qdiscZhengchao Shao
Test 3294: Create SFB with default setting Test 430a: Create SFB with rehash setting Test 3410: Create SFB with db setting Test 49a0: Create SFB with limit setting Test 1241: Create SFB with max setting Test 3249: Create SFB with target setting Test 30a9: Create SFB with increment setting Test 239a: Create SFB with decrement setting Test 9301: Create SFB with penalty_rate setting Test 2a01: Create SFB with penalty_burst setting Test 3209: Change SFB with rehash setting Test 5447: Show SFB class Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for plug qdiscZhengchao Shao
Test 3289: Create PLUG with default setting Test 0917: Create PLUG with block setting Test 483b: Create PLUG with release setting Test 4995: Create PLUG with release_indefinite setting Test 389c: Create PLUG with limit setting Test 384a: Delete PLUG with valid handle Test 439a: Replace PLUG with limit setting Test 9831: Change PLUG with limit setting Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for pfifo_fast qdiscZhengchao Shao
Test 900c: Create pfifo_fast with default setting Test 7470: Dump pfifo_fast stats Test b974: Replace pfifo_fast with different handle Test 3240: Delete pfifo_fast with valid handle Test 4385: Delete pfifo_fast with invalid handle Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for hhf qdiscZhengchao Shao
Test 4812: Create HHF with default setting Test 8a92: Create HHF with limit setting Test 3491: Create HHF with quantum setting Test ba04: Create HHF with reset_timeout setting Test 4238: Create HHF with admit_bytes setting Test 839f: Create HHF with evict_timeout setting Test a044: Create HHF with non_hh_weight setting Test 32f9: Change HHF with limit setting Test 385e: Show HHF class Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for gred qdiscZhengchao Shao
Test 8942: Create GRED with default setting Test 5783: Create GRED with grio setting Test 8a09: Create GRED with limit setting Test 48cb: Create GRED with ecn setting Test 763a: Change GRED setting Test 8309: Show GRED class Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for fq qdiscZhengchao Shao
Test 983b: Create FQ with default setting Test 38a1: Create FQ with limit packet setting Test 0a18: Create FQ with flow_limit setting Test 2390: Create FQ with quantum setting Test 845b: Create FQ with initial_quantum setting Test 9398: Create FQ with maxrate setting Test 342c: Create FQ with nopacing setting Test 6391: Create FQ with refill_delay setting Test 238b: Create FQ with low_rate_threshold setting Test 7582: Create FQ with orphan_mask setting Test 4894: Create FQ with timer_slack setting Test 324c: Create FQ with ce_threshold setting Test 424a: Create FQ with horizon time setting Test 89e1: Create FQ with horizon_cap setting Test 32e1: Delete FQ with valid handle Test 49b0: Replace FQ with limit setting Test 9478: Change FQ with limit setting Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for etf qdiscZhengchao Shao
Test 34ba: Create ETF with default setting Test 438f: Create ETF with delta nanos setting Test 9041: Create ETF with deadline_mode setting Test 9a0c: Create ETF with skip_sock_check setting Test 2093: Delete ETF with valid handle Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for codel qdiscZhengchao Shao
Test 983a: Create CODEL with default setting Test 38aa: Create CODEL with limit packet setting Test 9178: Create CODEL with target setting Test 78d1: Create CODEL with interval setting Test 238a: Create CODEL with ecn setting Test 939c: Create CODEL with ce_threshold setting Test 8380: Delete CODEL with valid handle Test 289c: Replace CODEL with limit setting Test 0648: Change CODEL with limit setting Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for choke qdiscZhengchao Shao
Test 8937: Create CHOKE with default setting Test 48c0: Create CHOKE with min packet setting Test 38c1: Create CHOKE with max packet setting Test 234a: Create CHOKE with ecn setting Test 4380: Create CHOKE with burst setting Test 48c7: Delete CHOKE with valid handle Test 4398: Replace CHOKE with min setting Test 0301: Change CHOKE with limit setting Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28selftests/tc-testing: add selftests for atm qdiscZhengchao Shao
Test 7628: Create ATM with default setting Test 390a: Delete ATM with valid handle Test 32a0: Show ATM class Test 6310: Dump ATM stats Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28MAINTAINERS: RustMiguel Ojeda
Miguel, Alex and Wedson will be maintaining the Rust support. Boqun, Gary and Björn will be reviewers. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28xfrm: Reinject transport-mode packets through workqueueLiu Jian
The following warning is displayed when the tcp6-multi-diffip11 stress test case of the LTP test suite is tested: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198] CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : des3_ede_encrypt+0x27c/0x460 [libdes] lr : 0x3f sp : ffff80000ceaa1b0 x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e51e5280 x26: ffff80004df75030 x25: ffff0000e51e4600 x24: 000000000000003b x23: 0000000000802080 x22: 000000000000003d x21: 0000000000000038 x20: 0000000080000020 x19: 000000000000000a x18: 0000000000000033 x17: ffff0000e51e4780 x16: ffff80004e2d1448 x15: ffff80004e2d1248 x14: ffff0000e51e4680 x13: ffff80004e2d1348 x12: ffff80004e2d1548 x11: ffff80004e2d1848 x10: ffff80004e2d1648 x9 : ffff80004e2d1748 x8 : ffff80004e2d1948 x7 : 000000000bcaf83d x6 : 000000000000001b x5 : ffff80004e2d1048 x4 : 00000000761bf3bf x3 : 000000007f1dd0a3 x2 : ffff0000e51e4780 x1 : ffff0000e3b9a2f8 x0 : 00000000db44e872 Call trace: des3_ede_encrypt+0x27c/0x460 [libdes] crypto_des3_ede_encrypt+0x1c/0x30 [des_generic] crypto_cbc_encrypt+0x148/0x190 crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp6_output_tail+0x1c8/0x5d0 [esp6] esp6_output+0x120/0x278 [esp6] xfrm_output_one+0x458/0x4ec xfrm_output_resume+0x6c/0x1f0 xfrm_output+0xac/0x4ac __xfrm6_output+0x130/0x270 xfrm6_output+0x60/0xec ip6_xmit+0x2ec/0x5bc inet6_csk_xmit+0xbc/0x10c __tcp_transmit_skb+0x460/0x8c0 tcp_write_xmit+0x348/0x890 __tcp_push_pending_frames+0x44/0x110 tcp_rcv_established+0x3c8/0x720 tcp_v6_do_rcv+0xdc/0x4a0 tcp_v6_rcv+0xc24/0xcb0 ip6_protocol_deliver_rcu+0xf0/0x574 ip6_input_finish+0x48/0x7c ip6_input+0x48/0xc0 ip6_rcv_finish+0x80/0x9c xfrm_trans_reinject+0xb0/0xf4 tasklet_action_common.constprop.0+0xf8/0x134 tasklet_action+0x30/0x3c __do_softirq+0x128/0x368 do_softirq+0xb4/0xc0 __local_bh_enable_ip+0xb0/0xb4 put_cpu_fpsimd_context+0x40/0x70 kernel_neon_end+0x20/0x40 sha1_base_do_update.constprop.0.isra.0+0x11c/0x140 [sha1_ce] sha1_ce_finup+0x94/0x110 [sha1_ce] crypto_shash_finup+0x34/0xc0 hmac_finup+0x48/0xe0 crypto_shash_finup+0x34/0xc0 shash_digest_unaligned+0x74/0x90 crypto_shash_digest+0x4c/0x9c shash_ahash_digest+0xc8/0xf0 shash_async_digest+0x28/0x34 crypto_ahash_digest+0x48/0xcc crypto_authenc_genicv+0x88/0xcc [authenc] crypto_authenc_encrypt+0xd8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp6_output_tail+0x1c8/0x5d0 [esp6] esp6_output+0x120/0x278 [esp6] xfrm_output_one+0x458/0x4ec xfrm_output_resume+0x6c/0x1f0 xfrm_output+0xac/0x4ac __xfrm6_output+0x130/0x270 xfrm6_output+0x60/0xec ip6_xmit+0x2ec/0x5bc inet6_csk_xmit+0xbc/0x10c __tcp_transmit_skb+0x460/0x8c0 tcp_write_xmit+0x348/0x890 __tcp_push_pending_frames+0x44/0x110 tcp_push+0xb4/0x14c tcp_sendmsg_locked+0x71c/0xb64 tcp_sendmsg+0x40/0x6c inet6_sendmsg+0x4c/0x80 sock_sendmsg+0x5c/0x6c __sys_sendto+0x128/0x15c __arm64_sys_sendto+0x30/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x170/0x194 do_el0_svc+0x38/0x4c el0_svc+0x28/0xe0 el0t_64_sync_handler+0xbc/0x13c el0t_64_sync+0x180/0x184 Get softirq info by bcc tool: ./softirqs -NT 10 Tracing soft irq event time... Hit Ctrl-C to end. 15:34:34 SOFTIRQ TOTAL_nsecs block 158990 timer 20030920 sched 46577080 net_rx 676746820 tasklet 9906067650 15:34:45 SOFTIRQ TOTAL_nsecs block 86100 sched 38849790 net_rx 676532470 timer 1163848790 tasklet 9409019620 15:34:55 SOFTIRQ TOTAL_nsecs sched 58078450 net_rx 475156720 timer 533832410 tasklet 9431333300 The tasklet software interrupt takes too much time. Therefore, the xfrm_trans_reinject executor is changed from tasklet to workqueue. Add add spin lock to protect the queue. This reduces the processing flow of the tcp_sendmsg function in this scenario. Fixes: acf568ee859f0 ("xfrm: Reinject transport-mode packets through tasklet") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-09-28samples: add first Rust examplesMiguel Ojeda
The beginning of a set of Rust modules that showcase how Rust modules look like and how to use the abstracted kernel features. It also includes an example of a Rust host program with several modules. These samples also double as tests in the CI. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Milan Landaverde <milan@mdaverde.com> Signed-off-by: Milan Landaverde <milan@mdaverde.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28x86: enable initial Rust supportMiguel Ojeda
Note that only x86_64 is covered and not all features nor mitigations are handled, but it is enough as a starting point and showcases the basics needed to add Rust support for a new architecture. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: David Gow <davidgow@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28docs: add Rust documentationMiguel Ojeda
Most of the documentation for Rust is written within the source code itself, as it is idiomatic for Rust projects. This applies to both the shared infrastructure at `rust/` as well as any other Rust module (e.g. drivers) written across the kernel. However, these documents contain general information that does not fit particularly well in the source code, like the Quick Start guide. It also contains a few other small changes elsewhere in the documentation folder. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Wu XiangCheng <bobwxc@email.cn> Signed-off-by: Wu XiangCheng <bobwxc@email.cn> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Yuki Okushi <jtitor@2k36.org> Signed-off-by: Yuki Okushi <jtitor@2k36.org> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Wei Liu <wei.liu@kernel.org> Co-developed-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Julian Merkle <me@jvmerkle.de> Signed-off-by: Julian Merkle <me@jvmerkle.de> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28Kbuild: add Rust supportMiguel Ojeda
Having most of the new files in place, we now enable Rust support in the build system, including `Kconfig` entries related to Rust, the Rust configuration printer and a few other bits. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Douglas Su <d0u9.su@outlook.com> Signed-off-by: Douglas Su <d0u9.su@outlook.com> Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org> Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org> Co-developed-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: add `.rustfmt.toml`Miguel Ojeda
This is the configuration file for the `rustfmt` tool. `rustfmt` is a tool for formatting Rust code according to style guidelines. It is very commonly used across Rust projects. The default configuration options are used. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `is_rust_module.sh`Daniel Xu
This script is used to detect whether a kernel module is written in Rust. It will later be used to disable BTF generation on Rust modules as BTF does not yet support Rust. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `rust_is_available.sh`Miguel Ojeda
This script tests whether the Rust toolchain requirements are in place to enable Rust support. It uses `min-tool-version.sh` to fetch the version numbers. The build system will call it to set `CONFIG_RUST_IS_AVAILABLE` in a later patch. It also has an option (`-v`) to explain what is missing, which is useful to set up the development environment. This is used via the `make rustavailable` target added in a later patch. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Miguel Cano <macanroj@gmail.com> Signed-off-by: Miguel Cano <macanroj@gmail.com> Co-developed-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Tiago Lam <tiagolam@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `generate_rust_target.rs`Miguel Ojeda
This script takes care of generating the custom target specification file for `rustc`, based on the kernel configuration. It also serves as an example of a Rust host program. A dummy architecture is kept in this patch so that a later patch adds x86 support on top with as few changes as possible. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: David Gow <davidgow@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: add `generate_rust_analyzer.py`Miguel Ojeda
The `generate_rust_analyzer.py` script generates the configuration file (`rust-project.json`) for rust-analyzer. rust-analyzer is a modular compiler frontend for the Rust language. It provides an LSP server which can be used in editors such as VS Code, Emacs or Vim. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: decode_stacktrace: demangle Rust symbolsMiguel Ojeda
Recent versions of both Binutils (`c++filt`) and LLVM (`llvm-cxxfilt`) provide Rust v0 mangling support. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: checkpatch: enable language-independent checks for RustMiguel Ojeda
Include Rust in the "source code files" category, so that the language-independent tests are checked for Rust too, and teach `checkpatch` about the comment style for Rust files. This enables the malformed SPDX check, the misplaced SPDX license tag check, the long line checks, the lines without a newline check and the embedded filename check. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28scripts: checkpatch: diagnose uses of `%pA` in the C side as errorsMiguel Ojeda
The `%pA` format specifier is only intended to be used from Rust. `checkpatch.pl` already gives a warning for invalid specificers: WARNING: Invalid vsprintf pointer extension '%pA' This makes it an error and introduces an explanatory message: ERROR: Invalid vsprintf pointer extension '%pA' - '%pA' is only intended to be used from Rust code Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Joe Perches <joe@perches.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28vsprintf: add new `%pA` format specifierGary Guo
This patch adds a format specifier `%pA` to `vsprintf` which formats a pointer as `core::fmt::Arguments`. Doing so allows us to directly format to the internal buffer of `printf`, so we do not have to use a temporary buffer on the stack to pre-assemble the message on the Rust side. This specifier is intended only to be used from Rust and not for C, so `checkpatch.pl` is intentionally unchanged to catch any misuse. Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: export generated symbolsMiguel Ojeda
All symbols are reexported reusing the `EXPORT_SYMBOL_GPL` macro from C. The lists of symbols are generated on the fly. There are three main sets of symbols to distinguish: - The ones from the `core` and `alloc` crates (from the Rust standard library). The code is licensed as Apache/MIT. - The ones from our abstractions in the `kernel` crate. - The helpers (already exported since they are not generated). We export everything as GPL. This ensures we do not mistakenly expose GPL kernel symbols/features as non-GPL, even indirectly. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: add `kernel` crateWedson Almeida Filho
The `kernel` crate currently includes all the abstractions that wrap kernel features written in C. These abstractions call the C side of the kernel via the generated bindings with the `bindgen` tool. Modules developed in Rust should never call the bindings themselves. In the future, as the abstractions grow in number, we may need to split this crate into several, possibly following a similar subdivision in subsystems as the kernel itself and/or moving the code to the actual subsystems. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Geoffrey Thomas <geofft@ldpreload.com> Signed-off-by: Geoffrey Thomas <geofft@ldpreload.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Fox Chen <foxhlchen@gmail.com> Signed-off-by: Fox Chen <foxhlchen@gmail.com> Co-developed-by: Viktor Garske <viktor@v-gar.de> Signed-off-by: Viktor Garske <viktor@v-gar.de> Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Co-developed-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com> Signed-off-by: Léo Lanteri Thauvin <leseulartichaut@gmail.com> Co-developed-by: Niklas Mohrin <dev@niklasmohrin.de> Signed-off-by: Niklas Mohrin <dev@niklasmohrin.de> Co-developed-by: Milan Landaverde <milan@mdaverde.com> Signed-off-by: Milan Landaverde <milan@mdaverde.com> Co-developed-by: Morgan Bartlett <mjmouse9999@gmail.com> Signed-off-by: Morgan Bartlett <mjmouse9999@gmail.com> Co-developed-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Co-developed-by: Nándor István Krácser <bonifaido@gmail.com> Signed-off-by: Nándor István Krácser <bonifaido@gmail.com> Co-developed-by: David Gow <davidgow@google.com> Signed-off-by: David Gow <davidgow@google.com> Co-developed-by: John Baublitz <john.m.baublitz@gmail.com> Signed-off-by: John Baublitz <john.m.baublitz@gmail.com> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: add `bindings` crateMiguel Ojeda
This crate contains the bindings to the C side of the kernel. Calling C (in general, FFI) is assumed to be unsafe in Rust and, in many cases, this is accurate. For instance, virtually all C functions that take a pointer are unsafe since, typically, it will be dereferenced at some point (and in most cases there is no way for the callee to check its validity beforehand). Since one of the goals of using Rust in the kernel is precisely to avoid unsafe code in "leaf" kernel modules (e.g. drivers), these bindings should not be used directly by them. Instead, these bindings need to be wrapped into safe abstractions. These abstractions provide a safe API that kernel modules can use. In this way, unsafe code in kernel modules is minimized. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Co-developed-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: add `macros` crateMiguel Ojeda
This crate contains all the procedural macros ("proc macros") shared by all the kernel. Procedural macros allow to create syntax extensions. They run at compile-time and can consume as well as produce Rust syntax. For instance, the `module!` macro that is used by Rust modules is implemented here. It allows to easily declare the equivalent information to the `MODULE_*` macros in C modules, e.g.: module! { type: RustMinimal, name: b"rust_minimal", author: b"Rust for Linux Contributors", description: b"Rust minimal sample", license: b"GPL", } Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Matthew Bakhtiari <dev@mtbk.me> Signed-off-by: Matthew Bakhtiari <dev@mtbk.me> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: add `compiler_builtins` crateMiguel Ojeda
Rust provides `compiler_builtins` as a port of LLVM's `compiler-rt`. Since we do not need the vast majority of them, we avoid the dependency by providing our own crate. Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: adapt `alloc` crate to the kernelMiguel Ojeda
This customizes the subset of the Rust standard library `alloc` that was just imported as-is, mainly by: - Adding SPDX license identifiers. - Skipping modules (e.g. `rc` and `sync`) via new `cfg`s. - Adding fallible (`try_*`) versions of existing infallible methods (i.e. returning a `Result` instead of panicking). Since the standard library requires stable/unstable attributes, these additions are annotated with: #[stable(feature = "kernel", since = "1.0.0")] Using "kernel" as the feature allows to have the additions clearly marked. The "1.0.0" version is just a placeholder. (At the moment, only one is needed, but in the future more fallible methods will be added). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Matthew Bakhtiari <dev@mtbk.me> Signed-off-by: Matthew Bakhtiari <dev@mtbk.me> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: import upstream `alloc` crateMiguel Ojeda
This is a subset of the Rust standard library `alloc` crate, version 1.62.0, licensed under "Apache-2.0 OR MIT", from: https://github.com/rust-lang/rust/tree/1.62.0/library/alloc/src The files are copied as-is, with no modifications whatsoever (not even adding the SPDX identifiers). For copyright details, please see: https://github.com/rust-lang/rust/blob/1.62.0/COPYRIGHT The next patch modifies these files as needed for use within the kernel. This patch split allows reviewers to double-check the import and to clearly see the differences introduced. Vendoring `alloc`, at least for the moment, allows us to have fallible allocations support (i.e. the `try_*` versions of methods which return a `Result` instead of panicking) early on. It also gives a bit more freedom to experiment with new interfaces and to iterate quickly. Eventually, the goal is to have everything the kernel needs in upstream `alloc` and drop it from the kernel tree. For a summary of work on `alloc` happening upstream, please see: https://github.com/Rust-for-Linux/linux/issues/408 The following script may be used to verify the contents: for path in $(cd rust/alloc/ && find . -type f -name '*.rs'); do curl --silent --show-error --location \ https://github.com/rust-lang/rust/raw/1.62.0/library/alloc/src/$path \ | diff --unified rust/alloc/$path - && echo $path: OK done Reviewed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28rust: add C helpersMiguel Ojeda
Introduces the source file that will contain forwarders to C macros and inlined functions. Initially this only contains a single helper, but will gain more as more functionality is added to the `kernel` crate in the future. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Geoffrey Thomas <geofft@ldpreload.com> Signed-off-by: Geoffrey Thomas <geofft@ldpreload.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: increase maximum kernel symbol length to 512Miguel Ojeda
Rust symbols can become quite long due to namespacing introduced by modules, types, traits, generics, etc. For instance, the following code: pub mod my_module { pub struct MyType; pub struct MyGenericType<T>(T); pub trait MyTrait { fn my_method() -> u32; } impl MyTrait for MyGenericType<MyType> { fn my_method() -> u32 { 42 } } } generates a symbol of length 96 when using the upcoming v0 mangling scheme: _RNvXNtCshGpAVYOtgW1_7example9my_moduleINtB2_13MyGenericTypeNtB2_6MyTypeENtB2_7MyTrait9my_method At the moment, Rust symbols may reach up to 300 in length. Setting 512 as the maximum seems like a reasonable choice to keep some headroom. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: support "big" kernel symbolsMiguel Ojeda
Rust symbols can become quite long due to namespacing introduced by modules, types, traits, generics, etc. Increasing to 255 is not enough in some cases, therefore introduce longer lengths to the symbol table. In order to avoid increasing all lengths to 2 bytes (since most of them are small, including many Rust ones), use ULEB128 to keep smaller symbols in 1 byte, with the rest in 2 bytes. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: add static relationship between `KSYM_NAME_LEN{,_BUFFER}`Miguel Ojeda
This adds a static assert to ensure `KSYM_NAME_LEN_BUFFER` gets updated when `KSYM_NAME_LEN` changes. The relationship used is one that keeps the new size (512+1) close to the original buffer size (500). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: avoid hardcoding buffer sizeBoqun Feng
This introduces `KSYM_NAME_LEN_BUFFER` in place of the previously hardcoded size of the input buffer. It will also make it easier to update the size in a single place in a later patch. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28kallsyms: use `ARRAY_SIZE` instead of hardcoded sizeBoqun Feng
This removes one place where the `500` constant is hardcoded. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Geert Stappers <stappers@stappers.nl> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 09:29:04 +0000