summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-01mmc:fix a bug when max_discard is 0Jiong Wu
The original purpose of the code I fix is to replace max_discard with max_trim if max_trim is less than max_discard. When max_discard is 0 we should replace max_discard with max_trim as well, because max_discard equals 0 happens only when the max_do_calc_max_discard process is overflowed, so if mmc_can_trim(card) is true, max_discard should be replaced by an available max_trim. However, in the original code, there are two lines of code interfere the right process. 1) if (max_discard && mmc_can_trim(card)) when max_discard is 0, it skips the process checking if max_discard needs to be replaced with max_trim. 2) if (max_trim < max_discard) the condition is false when max_discard is 0. it also skips the process that replaces max_discard with max_trim, in fact, we should replace the 0-valued max_discard with max_trim. Signed-off-by: Jiong Wu <Lohengrin1024@gmail.com> Fixes: b305882fbc87 (mmc: core: optimize mmc_calc_max_discard) Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-03-01s390: warn about clearing als implied facilitiesVasily Gorbik
Add a warning about removing required architecture level set facilities via "facilities=" command line option. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-01s390: allow overriding facilities via command lineVasily Gorbik
Add "facilities=" command line option which allows to override facility bits returned by stfle. The main purpose of that is debugging aids which allows to test specific kernel behaviour depending on specific facilities presence. It also affects CPU alternatives. "facilities=" command line option format is comma separated list of integer values to be additionally set or cleared (if value is starting with "!"). Values ranges are also supported. e.g.: facilities=!130-160,159,167-169 Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-01s390: clean up redundant facilities list setupVasily Gorbik
Facilities list in the lowcore is initially set up by verify_facilities from als.c and later initializations are redundant, so cleaning them up. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-01s390/als: remove duplicated in-place implementation of stfleVasily Gorbik
Reuse __stfle call instead of in-place implementation. __stfle is using memcpy and memset functions but they are safe to use, since mem.S is built with -march=z900. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-01Merge branch 'bpf-dedup-fixes'Daniel Borkmann
Andrii Nakryiko says: ==================== This patchset fixes a bug in btf_dedup() algorithm, which under specific hash collision causes infinite loop. It also exposes ability to tune BTF deduplication table size, with double purpose of allowing applications to adjust size according to the size of BTF data, as well as allowing a simple way to force hash collisions by setting table size to 1. - Patch #1 fixes bug in btf_dedup testing code that's checking strings - Patch #2 fixes pointer arg formatting in btf.h - Patch #3 adds option to specify custom dedup table size - Patch #4 fixes aforementioned bug in btf_dedup - Patch #5 adds test that validates the fix v1->v2: - remove "Fixes" from formatting change patch - extract roundup_pow2_max func for dedup table size - btf_equal_struct -> btf_shallow_equal_struct - explain in comment why we can't rely on just btf_dedup_is_equiv ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01selftests/bpf: add btf_dedup test of FWD/STRUCT resolutionAndrii Nakryiko
This patch adds a btf_dedup test exercising logic of STRUCT<->FWD resolution and validating that STRUCT is not resolved to a FWD. It also forces hash collisions, forcing both FWD and STRUCT to be candidates for each other. Previously this condition caused infinite loop due to FWD pointing to STRUCT and STRUCT pointing to its FWD. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01btf: fix bug with resolving STRUCT/UNION into corresponding FWDAndrii Nakryiko
When checking available canonical candidates for struct/union algorithm utilizes btf_dedup_is_equiv to determine if candidate is suitable. This check is not enough when candidate is corresponding FWD for that struct/union, because according to equivalence logic they are equivalent. When it so happens that FWD and STRUCT/UNION end in hashing to the same bucket, it's possible to create remapping loop from FWD to STRUCT and STRUCT to same FWD, which will cause btf_dedup() to loop forever. This patch fixes the issue by additionally checking that type and canonical candidate are strictly equal (utilizing btf_equal_struct). Fixes: d5caef5b5655 ("btf: add BTF types deduplication algorithm") Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01btf: allow to customize dedup hash table sizeAndrii Nakryiko
Default size of dedup table (16k) is good enough for most binaries, even typical vmlinux images. But there are cases of binaries with huge amount of BTF types (e.g., allyesconfig variants of kernel), which benefit from having bigger dedup table size to lower amount of unnecessary hash collisions. Tools like pahole, thus, can tune this parameter to reach optimal performance. This change also serves double purpose of allowing tests to force hash collisions to test some corner cases, used in follow up patch. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01libbpf: fix formatting for btf_ext__get_raw_dataAndrii Nakryiko
Fix invalid formatting of pointer arg. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01selftests/bpf: fix btf_dedup testing codeAndrii Nakryiko
btf_dedup testing code doesn't account for length of struct btf_header when calculating the start of a string section. This patch fixes this problem. Fixes: 49b57e0d01db ("tools/bpf: remove btf__get_strings() superseded by raw data API") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01tools/libbpf: signedness bug in btf_dedup_ref_type()Dan Carpenter
The "ref_type_id" variable needs to be signed for the error handling to work. Fixes: d5caef5b5655 ("btf: add BTF types deduplication algorithm") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01Merge branch 'bpf-samples-improvements'Daniel Borkmann
Jakub Kicinski says: ==================== This set is next part of a quest to get rid of the bpf_load ELF loader. It fixes some minor issues with the samples and starts the conversion. First patch fixes ping invocations, ping localhost defaults to IPv6 on modern setups. Next load_sock_ops sample is removed and users are directed towards using bpftool directly. Patch 4 removes the use of bpf_load from samples which don't need the auto-attachment functionality at all. Patch 5 improves symbol counting in libbpf, it's not currently an issue but it will be when anyone adds a symbol with a long name. Let's make sure that person doesn't have to spend time scratching their head and wondering why .a and .so symbol counts don't match. v2: - specify prog_type where possible (Andrii). ==================== Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01tools: libbpf: make sure readelf shows full names in build checksJakub Kicinski
readelf truncates its output by default to attempt to make it more readable. This can lead to function names getting aliased if they differ late in the string. Use --wide parameter to avoid truncation. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: use libbpf where easyJakub Kicinski
Some samples don't really need the magic of bpf_load, switch them to libbpf. v2: - specify program types. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01tools: libbpf: add a correctly named define for map iterationJakub Kicinski
For historical reasons the helper to loop over maps in an object is called bpf_map__for_each while it really should be called bpf_object__for_each_map. Rename and add a correctly named define for backward compatibility. Switch all in-tree users to the correct name (Quentin). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: remove load_sock_ops in favour of bpftoolJakub Kicinski
bpftool can do all the things load_sock_ops used to do, and more. Point users to bpftool instead of maintaining this sample utility. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01samples: bpf: force IPv4 in pingJakub Kicinski
ping localhost may default of IPv6 on modern systems, but samples are trying to only parse IPv4. Force IPv4. samples/bpf/tracex1_user.c doesn't interpret the packet so we don't care which IP version will be used there. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01selftests/bpf: use __bpf_constant_htons in test_prog.c for flow dissectorStanislav Fomichev
Older GCC (<4.8) isn't smart enough to optimize !__builtin_constant_p() branch in bpf_htons. I recently fixed it for pkt_v4 and pkt_v6 in commit a0517a0f7ef23 ("selftests/bpf: use __bpf_constant_htons in test_prog.c"), but later added another bunch of bpf_htons in commit bf0f0fd939451 ("selftests/bpf: add simple BPF_PROG_TEST_RUN examples for flow dissector"). Fixes: bf0f0fd939451 ("selftests/bpf: add simple BPF_PROG_TEST_RUN examples for flow dissector") Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01bpf: add missing entries to bpf_helpers.hWillem de Bruijn
This header defines the BPF functions enumerated in uapi/linux.bpf.h in a callable format. Expand to include all registered functions. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01bpf: fix build without bpf_syscallAlexei Starovoitov
wrap bpf_stats_enabled sysctl with #ifdef Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 492ecee892c2 ("bpf: enable program stats") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-28Merge tag 'mips_fixes_5.0_4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix 16b cmpxchg() operations which could erroneously fail if bits 15:8 of the old value are non-zero. In practice I'm not aware of any actual users of 16b cmpxchg() on MIPS, but this fixes the support for it was was introduced in v4.13. - Provide a struct device to dma_alloc_coherent for Lantiq XWAY systems with a "Voice MIPS Macro Core" (VMMC) device. - Provide DMA masks for BCM63xx ethernet devices, fixing a regression introduced in v4.19. - Fix memblock reservation for the kernel when the system has a non-zero PHYS_OFFSET, correcting the memblock conversion performed in v4.20" * tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: fix memory setup for platforms with PHYS_OFFSET != 0 MIPS: BCM63XX: provide DMA masks for ethernet devices MIPS: lantiq: pass struct device to DMA API functions MIPS: fix truncation in __cmpxchg_small for short values
2019-02-28Merge tag 'for-linus-5.0-ofs1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs fixlet from Mike Marshall: "Remove two un-needed BUG_ONs" * tag 'for-linus-5.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: remove two un-needed BUG_ONs...
2019-02-28net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390XMaxime Chevallier
Upon setting the cmode on 6390 and 6390X, the associated serdes interfaces must be powered off/on. Both 6390X and 6390 share code to do so, but it currently uses the 6390 specific helper mv88e6390_serdes_power() to disable and enable the serdes interface. This call will fail silently on 6390X when trying so set a 10G interface such as XAUI or RXAUI, since mv88e6390_serdes_power() internally grabs the lane number based on modes supported by the 6390, and returns 0 when getting -ENODEV as a lane number. Using mv88e6390x_serdes_power() should be safe here, since we explicitly rule-out all ports but the 9 and 10, and because modes supported by 6390 ports 9 and 10 are a subset of those supported on 6390X. This was tested on 6390X using RXAUI mode. Fixes: 364e9d7776a3 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28selftests: rtnetlink: use internal netns switch for ip commandsDavid Ahern
'ip' can switch network namespaces internally and then run a given command relative to that namespace without the need to fork and exec another ip instance. Update all references of the form: ip netns exec "$testns" ip ... to ip -netns "$testns" ... Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28Merge branch 's390-qeth-next'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: updates 2019-02-28 please apply one more qeth patch series for net-next. This eliminates some of the quirks in our reset code, and slims down the internal state machine. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: drop redundant state checkingJulian Wiedmann
Now that qeth always uses dev_close() to shutdown the interface, we can trust the locking and remove some custom state checks. qeth_l?_stop_card() is no longer called for a card in UP state, so remove the checks there too. This basically makes the UP state obsolete, so rip out the whole thing (except for the sysfs-visible string). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't special-case HW trap during suspendJulian Wiedmann
It makes no difference whether we 1. manually disarm the HW trap and call the offline code with recovery_mode == 1, or 2. call the offline code with recovery_mode == 0, and let it disarm the HW trap for us. So consolidate the two code paths in the suspend callback. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove driver-wide workqueueJulian Wiedmann
The qeth-wide workqueue is now only used by a single caller to schedule close_dev work. Just put it on a system queue instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't defer close_dev work during recoveryJulian Wiedmann
The recovery code already runs in a kthread, we don't have to defer the offlining further. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove a redundant check for card->devJulian Wiedmann
smatch complains that __qeth_l3_set_offline() first accesses card->dev, and then later checks whether the pointer is valid. Since commit d3d1b205e89f ("s390/qeth: allocate netdevice early"), the pointer is _always_ valid - that patch merely missed to remove this one check. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: call dev_close() during recoveryJulian Wiedmann
When resetting an interface ("recovery"), qeth currently attempts to elide the call to dev_close(). We initially only call .ndo_close to quiesce the data path, and then offline & online the ccwgroup device. If the reset succeeded, a call to .ndo_open then resumes the data path along with some internal setup (dev_addr validation, RX modeset) that dev_open() would have usually triggered. dev_close() only gets called (via the close_dev worker) if the reset action fails. It's unclear whether this was initially done due to locking concerns, or rather to execute the reset transparently. Either way, temporarily closing the interface without dev_close() is fragile, and means we're susceptible to various races and unexpected behaviour. For instance: - Bypassing dev_deactivate_many() means that the qdiscs are not set to __QDISC_STATE_DEACTIVATED. Consequently any intermittent TX completion can wake up the txq, resulting in calls to .ndo_start_xmit while the data path is down. We have custom state checking to detect this case and drop such packets. - Because the IFF_UP flag doesn't reflect the interface's actual state during a reset, we have custom state checking in .ndo_open and .ndo_close to guard against invalid calls. - Considering that the reset might take a considerable amount of time (in particular if an IO fails and we end up waiting for its timeout), we _do_ want NETDEV_GOING_DOWN and NETDEV_DOWN events so that components like bonding, team, bridge, macvlan, vlan, ... can take appropriate action. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: unconditionally clear MAC_REGISTERED flagJulian Wiedmann
In its attempt to run only the minimal amount of tear down steps, qeth_l2_stop_card() fails to reset the "is dev_addr registered?" flag in some rare scenarios. But a future change to the tear down sequence would cause us to _always_ hit this issue, so patch it up before that code lands. Fix it by unconditionally clearing the flag bit. This also allows us to remove the additional cleanup step in qeth_dev_layer2_store(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: enable/disable the HW trap a little earlierJulian Wiedmann
When setting a L2 qeth device online, enable the HW trap as soon as the control plane is available. This allows us to catch any error that occurs during the very first commands. In the same spirit, the offline code should disable the HW trap as the very first step of its processing. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove RECOVER stateJulian Wiedmann
The offline code uses a specific RECOVER state to indicate that the interface should be brought up when a qeth device is set online again. Rather than having a specific card-state for this, just put it in an internal flag bit and set the state to DOWN. When working with the card's state transitions, this reduces the complexity quite a bit. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: dsa: mv88e6xxx: Fix u64 statisticsAndrew Lunn
The switch maintains u64 counters for the number of octets sent and received. These are kept as two u32's which need to be combined. Fix the combing, which wrongly worked on u16's. Fixes: 80c4627b2719 ("dsa: mv88x6xxx: Refactor getting a single statistic") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28xen-netback: don't populate the hash cache on XenBus disconnectIgor Druzhinin
Occasionally, during the disconnection procedure on XenBus which includes hash cache deinitialization there might be some packets still in-flight on other processors. Handling of these packets includes hashing and hash cache population that finally results in hash cache data structure corruption. In order to avoid this we prevent hashing of those packets if there are no queues initialized. In that case RCU protection of queues guards the hash cache as well. Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net/smc: allow pnetid-less configurationUrsula Braun
Without hardware pnetid support there must currently be a pnet table configured to determine the IB device port to be used for SMC RDMA traffic. This patch enables a setup without pnet table, if the used handshake interface belongs already to a RoCE port. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28xen-netback: fix occasional leak of grant ref mappings under memory pressureIgor Druzhinin
Zero-copy callback flag is not yet set on frag list skb at the moment xenvif_handle_frag_list() returns -ENOMEM. This eventually results in leaking grant ref mappings since xenvif_zerocopy_callback() is never called for these fragments. Those eventually build up and cause Xen to kill Dom0 as the slots get reused for new mappings: "d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005" That behavior is observed under certain workloads where sudden spikes of page cache writes coexist with active atomic skb allocations from network traffic. Additionally, rework the logic to deal with frag_list deallocation in a single place. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: sched: pie: avoid slow division in drop probability decayLeslie Monis
As per RFC 8033, it is sufficient for the drop probability decay factor to have a value of (1 - 1/64) instead of 98%. This avoids the need to do slow division. Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28sctp: chunk.c: correct format string for size_t in printkMatthias Maennich
According to Documentation/core-api/printk-formats.rst, size_t should be printed with %zu, rather than %Zu. In addition, using %Zu triggers a warning on clang (-Wformat-extra-args): net/sctp/chunk.c:196:25: warning: data argument not used by format string [-Wformat-extra-args] __func__, asoc, max_data); ~~~~~~~~~~~~~~~~^~~~~~~~~ ./include/linux/printk.h:440:49: note: expanded from macro 'pr_warn_ratelimited' printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~ ./include/linux/printk.h:424:17: note: expanded from macro 'printk_ratelimited' printk(fmt, ##__VA_ARGS__); \ ~~~ ^ Fixes: 5b5e0928f742 ("lib/vsprintf.c: remove %Z support") Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Matthias Maennich <maennich@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: netem: fix skb length BUG_ON in __skb_to_sgvecSheng Lan
It can be reproduced by following steps: 1. virtio_net NIC is configured with gso/tso on 2. configure nginx as http server with an index file bigger than 1M bytes 3. use tc netem to produce duplicate packets and delay: tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90% 4. continually curl the nginx http server to get index file on client 5. BUG_ON is seen quickly [10258690.371129] kernel BUG at net/core/skbuff.c:4028! [10258690.371748] invalid opcode: 0000 [#1] SMP PTI [10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.0.0-rc6 #2 [10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202 [10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea [10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002 [10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028 [10258690.372094] FS: 0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000 [10258690.372094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0 [10258690.372094] Call Trace: [10258690.372094] <IRQ> [10258690.372094] skb_to_sgvec+0x11/0x40 [10258690.372094] start_xmit+0x38c/0x520 [virtio_net] [10258690.372094] dev_hard_start_xmit+0x9b/0x200 [10258690.372094] sch_direct_xmit+0xff/0x260 [10258690.372094] __qdisc_run+0x15e/0x4e0 [10258690.372094] net_tx_action+0x137/0x210 [10258690.372094] __do_softirq+0xd6/0x2a9 [10258690.372094] irq_exit+0xde/0xf0 [10258690.372094] smp_apic_timer_interrupt+0x74/0x140 [10258690.372094] apic_timer_interrupt+0xf/0x20 [10258690.372094] </IRQ> In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's linear data size and nonlinear data size, thus BUG_ON triggered. Because the skb is cloned and a part of nonlinear data is split off. Duplicate packet is cloned in netem_enqueue() and may be delayed some time in qdisc. When qdisc len reached the limit and returns NET_XMIT_DROP, the skb will be retransmit later in write queue. the skb will be fragmented by tso_fragment(), the limit size that depends on cwnd and mss decrease, the skb's nonlinear data will be split off. The length of the skb cloned by netem will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(), the BUG_ON trigger. To fix it, netem returns NET_XMIT_SUCCESS to upper stack when it clones a duplicate packet. Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()") Signed-off-by: Sheng Lan <lansheng@huawei.com> Reported-by: Qin Ji <jiqin.ji@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4vf: Enter debugging mode if FW is inaccessibleArjun Vynipadath
If we are not able to reach firmware, enter debugging mode that will help us to get adapter logs. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4: Enable outer UDP checksum offload for T6Arjun Vynipadath
T6 adapters support outer UDP checksum offload for encapsulated packets, hence enabling netdev feature flag NETIF_F_GSO_UDP_TUNNEL_CSUM. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4/cxgb4vf: Fix up netdev->hw_featuresArjun Vynipadath
GRO is done by cxgb4/cxgb4vf. Hence set NETIF_F_GRO flag for both cxgb4/cxgb4vf. Cleaned up VLAN netdev features in cxgb4vf. Also fixed NETIF_F_HIGHDMA being set unconditionally for vlan netdev features. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28dt-bindings: hwmon: Add missing documentation for lm75Jagan Teki
Add missing dt-binding documentation for lm75 hwmon sensor. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-02-28Merge tag 'mmc-v5.0-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix NULL ptr crash for a special test case - Align max segment size with logical block size to prevent bugs in v5.1-rc1. MMC host: - cqhci: Minor fixes - tmio: Prevent interrupt storm - tmio: Fixup SD/MMC card initialization - spi: Allow card to be detected during probe - sdhci-esdhc-imx: Fixup fix for ERR004536" * tag 'mmc-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-esdhc-imx: correct the fix of ERR004536 mmc: core: align max segment size with logical block size mmc: cqhci: Fix a tiny potential memory leak on error condition mmc: cqhci: fix space allocated for transfer descriptor mmc: core: Fix NULL ptr crash from mmc_should_fail_request mmc: tmio: fix access width of Block Count Register mmc: tmio_mmc_core: don't claim spurious interrupts mmc: spi: Fix card detection during probe
2019-02-28Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a compiler warning introduced by a previous fix, as well as two crash bugs on ARM" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512/arm - fix crash bug in Thumb2 build crypto: sha256/arm - fix crash bug in Thumb2 build crypto: ccree - add missing inline qualifier
2019-02-28kvm: properly check debugfs dentry before using itGreg Kroah-Hartman
debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"). syzbot has found a way to trigger multiple debugfs files attempting to be created, which fails, and then the error code gets passed to dentry_path_raw() which obviously does not like it. Reported-by: Eric Biggers <ebiggers@kernel.org> Reported-and-tested-by: syzbot+7857962b4d45e602b8ad@syzkaller.appspotmail.com Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-28regulator: stm32-vrefbuf: add power management supportFabrice Gasnier
Add support for suspend/resume and runtime PM to stm32-vrefbuf driver. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 16:14:24 +0000