summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-03mm/page_alloc: factor setup_pageset() into pageset_init() and ↵Cody P Schafer
pageset_set_batch() Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm/page_alloc: when handling percpu_pagelist_fraction, don't unneedly ↵Cody P Schafer
recalulate high Simply moves calculation of the new 'high' value outside the for_each_possible_cpu() loop, as it does not depend on the cpu. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm/page_alloc: convert zone_pcp_update() to rely on memory barriers instead ↵Cody P Schafer
of stop_machine() zone_pcp_update()'s goal is to adjust the ->high and ->mark members of a percpu pageset based on a zone's ->managed_pages. We don't need to drain the entire percpu pageset just to modify these fields. This lets us avoid calling setup_pageset() (and the draining required to call it) and instead allows simply setting the fields' values (with some attention paid to memory barriers to prevent the relationship between ->batch and ->high from being thrown off). This does change the behavior of zone_pcp_update() as the percpu pagesets will not be drained when zone_pcp_update() is called (they will end up being shrunk, not completely drained, later when a 0-order page is freed in free_hot_cold_page()). Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm/page_alloc: protect pcp->batch accesses with ACCESS_ONCECody P Schafer
pcp->batch could change at any point, avoid relying on it being a stable value. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm/page_alloc: insert memory barriers to allow async update of pcp batch and ↵Cody P Schafer
high Introduce pageset_update() to perform a safe transision from one set of pcp->{batch,high} to a new set using memory barriers. This ensures that batch is always set to a safe value (1) prior to updating high, and ensure that high is fully updated before setting the real value of batch. It avoids ->batch ever rising above ->high. Suggested by Gilad Ben-Yossef in these threads: https://lkml.org/lkml/2013/4/9/23 https://lkml.org/lkml/2013/4/10/49 Also reproduces his proposed comment. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm/page_alloc: prevent concurrent updaters of pcp ->batch and ->highCody P Schafer
Because we are going to rely upon a careful transision between old and new ->high and ->batch values using memory barriers and will remove stop_machine(), we need to prevent multiple updaters from interweaving their memory writes. Add a simple mutex to protect both update loops. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm/page_alloc: factor out setting of pcp->high and pcp->batchCody P Schafer
"Problems" with the current code: 1: there is a lack of synchronization in setting ->high and ->batch in percpu_pagelist_fraction_sysctl_handler() 2: stop_machine() in zone_pcp_update() is unnecissary. 3: zone_pcp_update() does not consider the case where percpu_pagelist_fraction is non-zero To fix: 1: add memory barriers, a safe ->batch value, an update side mutex when updating ->high and ->batch, and use ACCESS_ONCE() for ->batch users that expect a stable value. 2: avoid draining pages in zone_pcp_update(), rely upon the memory barriers added to fix #1 3: factor out quite a few functions, and then call the appropriate one. Note that it results in a change to the behavior of zone_pcp_update(), which is used by memory_hotplug. I'm rather certain that I've diserned (and preserved) the essential behavior (changing ->high and ->batch), and only eliminated unneeded actions (draining the per cpu pages), but this may not be the case. Further note that the draining of pages that previously took place in zone_pcp_update() occured after repeated draining when attempting to offline a page, and after the offline has "succeeded". It appears that the draining was added to zone_pcp_update() to avoid refactoring setup_pageset() into 2 funtions. This patch: Creates pageset_set_batch() for use in setup_pageset(). pageset_set_batch() imitates the functionality of setup_pagelist_highmark(), but uses the boot time (percpu_pagelist_fraction == 0) calculations for determining ->high based on ->batch. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03uio: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFTLibin
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ncpfs: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFTLibin
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: use vma_pages() to replace (vm_end - vm_start) >> PAGE_SHIFTLibin
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented as a inline funcion vma_pages() in linux/mm.h, so using it. Signed-off-by: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: remove compressed copy from zram in-memoryMinchan Kim
Swap subsystem does lazy swap slot free with expecting the page would be swapped out again so we can avoid unnecessary write. But the problem in in-memory swap(ex, zram) is that it consumes memory space until vm_swap_full(ie, used half of all of swap device) condition meet. It could be bad if we use multiple swap device, small in-memory swap and big storage swap or in-memory swap alone. This patch makes swap subsystem free swap slot as soon as swap-read is completed and make the swapcache page dirty so the page should be written out the swap device to reclaim it. It means we never lose it. I tested this patch with kernel compile workload. 1. before compile time : 9882.42 zram max wasted space by fragmentation: 13471881 byte memory space consumed by zram: 174227456 byte the number of slot free notify: 206684 2. after compile time : 9653.90 zram max wasted space by fragmentation: 11805932 byte memory space consumed by zram: 154001408 byte the number of slot free notify: 426972 [akpm@linux-foundation.org: tweak comment text] [artem.savkov@gmail.com: fix BUG due to non-swapcache pages in end_swap_bio_read()] [akpm@linux-foundation.org: invert unlikely() test, augment comment, 80-col cleanup] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Konrad Rzeszutek Wilk <konrad@darnok.org> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm, memcg: don't take task_lock in task_in_mem_cgroupDavid Rientjes
For processes that have detached their mm's, task_in_mem_cgroup() unnecessarily takes task_lock() when rcu_read_lock() is all that is necessary to call mem_cgroup_from_task(). While we're here, switch task_in_mem_cgroup() to return bool. Signed-off-by: David Rientjes <rientjes@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03pagemap: prepare to reuse constant bits with page-shiftPavel Emelyanov
In order to reuse bits from pagemap entries gracefully, we leave the entries as is but on pagemap open emit a warning in dmesg, that bits 55-60 are about to change in a couple of releases. Next, if a user issues soft-dirty clear command via the clear_refs file (it was disabled before v3.9) we assume that he's aware of the new pagemap format, note that fact and report the bits in pagemap in the new manner. The "migration strategy" looks like this then: 1. existing users are not affected -- they don't touch soft-dirty feature, thus see old bits in pagemap, but are warned and have time to fix themselves 2. those who use soft-dirty know about new pagemap format 3. some time soon we get rid of any signs of page-shift in pagemap as well as this trick with clear-soft-dirty affecting pagemap format. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03mm: soft-dirty bits for user memory changes trackingPavel Emelyanov
The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03pagemap: introduce pagemap_entry_t without pmshift bitsPavel Emelyanov
These bits are always constant (== PAGE_SHIFT) and just occupy space in the entry. Moreover, in next patch we will need to report one more bit in the pagemap, but all bits are already busy on it. That said, describe the pagemap entry that has 6 more free zero bits. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03clear_refs: introduce private struct for mm_walkPavel Emelyanov
In the next patch the clear-refs-type will be required in clear_refs_pte_range funciton, so prepare the walk->private to carry this info. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03clear_refs: sanitize accepted commands declarationPavel Emelyanov
This is the implementation of the soft-dirty bit concept that should help keep track of changes in user memory, which in turn is very-very required by the checkpoint-restore project (http://criu.org). To create a dump of an application(s) we save all the information about it to files, and the biggest part of such dump is the contents of tasks' memory. However, there are usage scenarios where it's not required to get _all_ the task memory while creating a dump. For example, when doing periodical dumps, it's only required to take full memory dump only at the first step and then take incremental changes of memory. Another example is live migration. We copy all the memory to the destination node without stopping all tasks, then stop them, check for what pages has changed, dump it and the rest of the state, then copy it to the destination node. This decreases freeze time significantly. That said, some help from kernel to watch how processes modify the contents of their memory is required. The proposal is to track changes with the help of new soft-dirty bit this way: 1. First do "echo 4 > /proc/$pid/clear_refs". At that point kernel clears the soft dirty _and_ the writable bits from all ptes of process $pid. From now on every write to any page will result in #pf and the subsequent call to pte_mkdirty/pmd_mkdirty, which in turn will set the soft dirty flag. 2. Then read the /proc/$pid/pagemap2 and check the soft-dirty bit reported there (the 55'th one). If set, the respective pte was written to since last call to clear refs. The soft-dirty bit is the _PAGE_BIT_HIDDEN one. Although it's used by kmemcheck, the latter one marks kernel pages with it, while the former bit is put on user pages so they do not conflict to each other. This patch: A new clear-refs type will be added in the next patch, so prepare code for that. [akpm@linux-foundation.org: don't assume that sizeof(enum clear_refs_types) == sizeof(int)] Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03crypto: sanitize argument for format stringKees Cook
The template lookup interface does not provide a way to use format strings, so make sure that the interface cannot be abused accidentally. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03block: do not pass disk names as format stringsKees Cook
Disk names may contain arbitrary strings, so they must not be interpreted as format strings. It seems that only md allows arbitrary strings to be used for disk names, but this could allow for a local memory corruption from uid 0 into ring 0. CVE-2013-2851 Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/cdrom/cdrom.c: use kzalloc() for failing hardwareJonathan Salwan
In drivers/cdrom/cdrom.c mmc_ioctl_cdrom_read_data() allocates a memory area with kmalloc in line 2885. 2885 cgc->buffer = kmalloc(blocksize, GFP_KERNEL); 2886 if (cgc->buffer == NULL) 2887 return -ENOMEM; In line 2908 we can find the copy_to_user function: 2908 if (!ret && copy_to_user(arg, cgc->buffer, blocksize)) The cgc->buffer is never cleaned and initialized before this function. If ret = 0 with the previous basic block, it's possible to display some memory bytes in kernel space from userspace. When we read a block from the disk it normally fills the ->buffer but if the drive is malfunctioning there is a chance that it would only be partially filled. The result is an leak information to userspace. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03block/compat_ioctl.c: do not leak info to user-spaceCong Wang
There is a hole in struct hd_geometry, so we have to zero the struct on stack before copying it to user-space. Signed-off-by: Cong Wang <amwang@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/cdrom/gdrom.c: fix device number leakLibo Chen
Without this patch, gdrom_major will leak when gd.cd_info alloc fails. Signed-off-by: Libo Chen <libo.chen@huawei.com> Cc: Jens Axboe <axboe@kernel.dk> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix NULL pointer dereference when traversing o2hb_all_regionsXue jiufei
There may exist NULL pointer dereference in config_item_name() when one volume (say Volume A) unmounts while another (say Volume B) mounting. Volume A Volume B already Mounted. Unmounting, call o2hb_heartbeat_group_drop_item() -> config_item_put(item) set reg(A)->item.ci_name to NULL in function config_item_cleanup(). begin mounting, call o2hb_region_pin() and tranverse all regions. When reading reg(A)->item.ci_name, it causes NULL pointer dereference. call o2hb_region_release() and del reg(A) from list. So we should skip accessing regions that is going to release when tranverse o2hb_all_regions. Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: joyce <xuejiufei@huawei.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: adjust switch_case syntax at o2net_state_change()Jie Liu
Adjust switch..case syntax at o2net_state_change to meet the kernel coding standard. s/printk/pr_info/. [akpm@linux-foundation.org: revert pr_foo() change] Signed-off-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix a comments typo at o2quo_hb_still_up()Jie Liu
Fix a comment typo in o2quo_hb_still_up() Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: consolidate o2hb_global_hearbeat_mode_set() naming conventionJie Liu
s/o2hb_global_hearbeat_mode_set/o2hb_global_heartbeat_mode_set/ to make the signature of those routines in a consistent manner with others for heartbeating. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Cc: Tao Ma <tm@tao.ma> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: submit disk heartbeat bio using WRITE_SYNCNoboru Iwamatsu
Under heavy I/O load, writing the disk heartbeat can be forced to wait for minutes, and this causes the node to be fenced. This patch tries to use WRITE_SYNC in submitting the heartbeat bio, so that writing the heartbeat will have a priority over other requests. Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Acked-by: Tao Ma <tm@tao.ma> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Srinivas Eeeda <srinivas.eeda@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Tested-by: Gurudas Pai <gurudas.pai@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: xattr: fix inlined xattr reflinkJunxiao Bi
Inlined xattr shared free space of inode block with inlined data or data extent record, so the size of the later two should be adjusted when inlined xattr is enabled. See ocfs2_xattr_ibody_init(). But this isn't done well when reflink. For inode with inlined data, its max inlined data size is adjusted in ocfs2_duplicate_inline_data(), no problem. But for inode with data extent record, its record count isn't adjusted. Fix it, or data extent record and inlined xattr may overwrite each other, then cause data corruption or xattr failure. One panic caused by this bug in our test environment is the following: kernel BUG at fs/ocfs2/xattr.c:1435! invalid opcode: 0000 [#1] SMP Pid: 10871, comm: multi_reflink_t Not tainted 2.6.39-300.17.1.el5uek #1 RIP: ocfs2_xa_offset_pointer+0x17/0x20 [ocfs2] RSP: e02b:ffff88007a587948 EFLAGS: 00010283 RAX: 0000000000000000 RBX: 0000000000000010 RCX: 00000000000051e4 RDX: ffff880057092060 RSI: 0000000000000f80 RDI: ffff88007a587a68 RBP: ffff88007a587948 R08: 00000000000062f4 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000010 R13: ffff88007a587a68 R14: 0000000000000001 R15: ffff88007a587c68 FS: 00007fccff7f06e0(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000015cf000 CR3: 000000007aa76000 CR4: 0000000000000660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process multi_reflink_t Call Trace: ocfs2_xa_reuse_entry+0x60/0x280 [ocfs2] ocfs2_xa_prepare_entry+0x17e/0x2a0 [ocfs2] ocfs2_xa_set+0xcc/0x250 [ocfs2] ocfs2_xattr_ibody_set+0x98/0x230 [ocfs2] __ocfs2_xattr_set_handle+0x4f/0x700 [ocfs2] ocfs2_xattr_set+0x6c6/0x890 [ocfs2] ocfs2_xattr_user_set+0x46/0x50 [ocfs2] generic_setxattr+0x70/0x90 __vfs_setxattr_noperm+0x80/0x1a0 vfs_setxattr+0xa9/0xb0 setxattr+0xc3/0x120 sys_fsetxattr+0xa8/0xd0 system_call_fastpath+0x16/0x1b Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix readonly issue in ocfs2_unlink()Younger Liu
While deleting a file with ocfs2_unlink(), there is a bug in this function. This bug will result in filesystem read-only. After calling ocfs2_orphan_add(), the file which will be deleted is added into orphan dir. If ocfs2_delete_entry() fails, the file still exists in the parent dir. And this scenario introduces a conflict of metadata. If a file is added into orphan dir, when we put inode of the file with iput(), the inode i_flags is setted (~OCFS2_VALID_FL) in ocfs2_remove_inode(), and then write back to disk. But as previously mentioned, the file still exists in the parent dir. On other nodes, the file can be still accessed. When first read the file with ocfs2_read_blocks() from disk, It will check and avalidate inode using ocfs2_validate_inode_block(). So File system will be readonly because the inode is invalid. In other words, the inode i_flags has been set (~OCFS2_VALID_FL). [akpm@linux-foundation.org: cleanups] [jeff.liu@oracle.com: s/inode_is_unlinkable/ocfs2_inode_is_unlinkable/] Signed-off-by: Younger Liu <younger.liu@huawei.com> Signed-off-by: Jensen <shencanquan@huawei.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: remove duplicated mlog_errno() in ocfs2_relink_block_groupAndrew Morton
Cc: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Younger Liu <younger.liu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: rework transaction rollback in ocfs2_relink_block_group()Jie Liu
In ocfs2_relink_block_group(), we roll back all those changes if notify intent to modify buffers for metadata update failed even if the relevant buffer has not yet been modified/got dirty at that point, that are not quite right because of: - None buffer has been modified/dirty if failed to call ocfs2_journal_access_gd() against the previous block group buffer - Only the previous block group buffer has got dirty if failed to call ocfs2_journal_access_gd() against the block group buffer - There is no need to roll back the change for file entry buffer at all Those problems will not cause anything wrong but unnecessary. This patch fix them and kill the useless bg_ptr variable as well. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Younger Liu <younger.liu@huawei.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: need rollback when journal_access failed in ocfs2_orphan_add()Younger Liu
While adding a file into orphan dir in ocfs2_orphan_add(), it calls __ocfs2_add_entry() before ocfs2_journal_access_di(). If ocfs2_journal_access_di() failed, the file is added into orphan dir, and orphan dir dinode updated, but file dinode has not been updated. Accordingly, the data is not consistent between file dinode and orphan dir. So, need to call ocfs2_journal_access_di() before __ocfs2_add_entry(), and if ocfs2_journal_access_di() failed, orphan_fe and orphan_dir_inode->i_nlink need rollback. This bug was added by 3939fda4 ("Ocfs2: Journaling i_flags and i_orphaned_slot when adding inode to orphan dir."). Signed-off-by: Younger Liu <younger.liu@huawei.com> Acked-by: Jeff Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: dlmlock_master() should return DLM_NORMAL after adding lock to ↵Xue jiufei
blocked list dlmlock_master() returns DLM_RECOVERING/DLM_MIGRATING/ DLM_FORWAR after adding lock to blocked list if lockres has the state DLM_LOCK_RES_RECOVERING/DLM_LOCK_RES_MIGRATING/ DLM_LOCK_RES_IN_PROGRESS. so it will retry in dlmlock(). And this may cause dlm_thread fall into an infinite loop Thread1 dlm_thread calls dlm_lock->dlmlock_master, if lockresA is in state DLM_LOCK_RES_RECOVERING, calls __dlm_wait_on_lockres() and waits until others threads clear this state; If cannot grant this lock, adding lock to blocked list, and return DLM_RECOVERING; Grant this lock and move it to grant list; After a while, retry and calls list_add_tail(), adding lock to blocked list again. Granted and blocked list of this lockres will become the following conditions: lock_res->granted.next = dlm_lock->list_head; lock_res->blocked.next = dlm_lock->list_head; dlm_lock->list_head.next = dlm_lock_resource->blocked; When dlm_thread traverses the granted list, it will fall into an endless loop, checking dlm_lock.list_head, dlm_lock->list_head.next (i.e.lock_res->blocked), lock_res->blocked.next(i.e.dlm_lock.list_head again) ..... Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: jensen <shencanquan@huawei.com> Cc: Jeff Liu <jeff.liu@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: xattr: remove useless free space checkingJunxiao Bi
Free space checking will be done in ocfs2_xattr_ibody_init(). So remove here. [akpm@linux-foundation.org: remove unused local] Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/cluster/tcp.c: free sc->sc_page in sc_kref_release()Younger Liu
There is a memory leak in sc_kref_release(). When free struct o2net_sock_container (sc), we should release sc->sc_page. Signed-off-by: Younger Liu <younger.liu@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/journal.h: add bits_wanted while calculating credits in ↵Goldwyn Rodrigues
ocfs2_calc_extend_credits While adding extends to a file, the credits are calculated incorrectly and if the requested clusters is more than one (or more because we used a conservative limit) then we run out of journal credits and we hit an assert in journalling code. The function parameter bits_wanted variable was not used at all. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: fix mutex_unlock and possible memory leak in ocfs2_remove_btree_rangeJoseph Qi
In ocfs2_remove_btree_range, when calling ocfs2_lock_refcount_tree and ocfs2_prepare_refcount_change_for_del failed, it goes to out and then tries to call mutex_unlock without mutex_lock before. And when calling ocfs2_reserve_blocks_for_rec_trunc failed, it should free ref_tree before return. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: remove unecessary variable needs_checkpointGoldwyn Rodrigues
Code cleanup: needs_checkpoint is assigned to but never used. Delete the variable. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Jeff Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: add missing dlm_put() in dlm_begin_reco_handler()Xue jiufei
dlm_begin_reco_handler() returns without putting dlm when dlm recovery state is DLM_RECO_STATE_FINALIZE. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03ocfs2: should not use le32_add_cpu to set ocfs2_dinode i_flagsJoseph Qi
If we use le32_add_cpu to set ocfs2_dinode i_flags, it may lead to the corresponding flag corrupted. So we should change it to bitwise and/or operation. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: shencanquan <shencanquan@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/dlm/dlmrecovery.c:dlm_request_all_locks(): ret should be int ↵Joseph Qi
instead of enum In dlm_request_all_locks, ret is type enum. But o2net_send_message returns a type int value. Then it will never run into the following error branch. So we should change the ret type from enum to int. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03fs/ocfs2/dlm/dlmrecovery.c: remove duplicate declarationsJoseph Qi
Below 3 functions have already been declared in dlmcommon.h, so we have no need to declare them again in dlmrecovery.c: dlm_complete_recovery_thread dlm_launch_recovery_thread dlm_kick_recovery_thread Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03configfs: use capped length for ->store_attribute()Dan Carpenter
The difference between "count" and "len" is that "len" is capped at 4095. Changing it like this makes it match how sysfs_write_file() is implemented. This is a static analysis patch. I haven't found any store_attribute() functions where this change makes a difference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03sound/soc/codecs/si476x.c: don't use 0bNNNAndrew Morton
spacr64 gcc-3.4.5 (at least) spits this back. Cc: Andrey Smirnov <andrey.smirnov@convergeddevices.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/dma/pl330.c: fix locking in pl330_free_chan_resources()Bartlomiej Zolnierkiewicz
tasklet_kill() may sleep so call it before taking pch->lock. Fixes following lockup: BUG: scheduling while atomic: cat/2383/0x00000002 Modules linked in: unwind_backtrace+0x0/0xfc __schedule_bug+0x4c/0x58 __schedule+0x690/0x6e0 sys_sched_yield+0x70/0x78 tasklet_kill+0x34/0x8c pl330_free_chan_resources+0x24/0x88 dma_chan_put+0x4c/0x50 [...] BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xe52aa04c, .magic: dead4ead, .owner: cat/2383, .owner_cpu: 1 unwind_backtrace+0x0/0xfc do_raw_spin_lock+0x194/0x204 _raw_spin_lock_irqsave+0x20/0x28 pl330_tasklet+0x2c/0x5a8 tasklet_action+0xfc/0x114 __do_softirq+0xe4/0x19c irq_exit+0x98/0x9c handle_IPI+0x124/0x16c gic_handle_irq+0x64/0x68 __irq_svc+0x40/0x70 cpuidle_wrap_enter+0x4c/0xa0 cpuidle_enter_state+0x18/0x68 cpuidle_idle_call+0xac/0xe0 cpu_idle+0xac/0xf0 Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03arch: c6x: mm: include "asm/uaccess.h" to pass compilingChen Gang
Need include "asm/uaccess.h" to pass compiling. The related error (with allmodconfig): arch/c6x/mm/init.c: In function `paging_init': arch/c6x/mm/init.c:46:2: error: implicit declaration of function `set_fs' [-Werror=implicit-function-declaration] arch/c6x/mm/init.c:46:9: error: `KERNEL_DS' undeclared (first use in this function) arch/c6x/mm/init.c:46:9: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Chen Gang <gang.chen@asianux.com> Cc: <stable@vger.kernel.org> [3.10.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03include/linux/smp.h:on_each_cpu(): switch back to a macroAndrew Morton
Commit f21afc25f9ed ("smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu()") converted on_each_cpu() to a C function. This required inclusion of irqflags.h, which broke ia64 and mn10300 (at least) due to header ordering hell. Switch on_each_cpu() back to a macro to fix this. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@vger.kernel.org> [3.10.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-07-03Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs updates from Steve French: "Various CIFS/SMB2/SMB3 updates for 3.11. Includes bug fixes - SMB3 support should be much more stable with key DFS fix and also signing possible now (although is more work to do to get SMB3 signing working well with multiuser). Mounts using the new SMB 3.02 dialect can now be done (specify "vers=3.02" on mount) against the most current Microsoft systems. Also includes a big cleanup of the cifs/smb2/smb3 authentication code from Jeff which fixes some long standing problems with the way allowed authentication flavors and signing are configured. Some followon patches later in the cycle will clean up allocation of structures for the various security mechanisms depending on what dialect is chosen (reduces memory usage a little) and to add support for the secure negotiate fsctl (for smb3) which prevents downgrade attacks." * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (39 commits) cifs: fill TRANS2_QUERY_FILE_INFO ByteCount fields cifs: fix SMB2 signing enablement in cifs_enable_signing [CIFS] Fix build warning [CIFS] SMB3 Signing enablement [CIFS] Do not set DFS flag on SMB2 open [CIFS] fix static checker warning cifs: try to handle the MUST SecurityFlags sanely When server doesn't provide SecurityBuffer on SMB2Negotiate pick default Handle big endianness in NTLM (ntlmv2) authentication revalidate directories instiantiated via FIND_* in order to handle DFS referrals SMB2 FSCTL and IOCTL worker function Charge at least one credit, if server says that it supports multicredit Remove typo Some missing share flags cifs: using strlcpy instead of strncpy Update headers to update various SMB3 ioctl definitions Update cifs version number Add ability to dipslay SMB3 share flags and capabilities for debugging Add some missing SMB3 and SMB3.02 flags Add SMB3.02 dialect support ...
2013-07-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "In this update, Smack learns to love IPv6 and to mount a filesystem with a transmutable hierarchy (i.e. security labels are inherited from parent directory upon creation rather than creating process). The rest of the changes are maintenance" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (37 commits) tpm/tpm_i2c_infineon: Remove unused header file tpm: tpm_i2c_infinion: Don't modify i2c_client->driver evm: audit integrity metadata failures integrity: move integrity_audit_msg() evm: calculate HMAC after initializing posix acl on tmpfs maintainers: add Dmitry Kasatkin Smack: Fix the bug smackcipso can't set CIPSO correctly Smack: Fix possible NULL pointer dereference at smk_netlbl_mls() Smack: Add smkfstransmute mount option Smack: Improve access check performance Smack: Local IPv6 port based controls tpm: fix regression caused by section type conflict of tpm_dev_release() in ppc builds maintainers: Remove Kent from maintainers tpm: move TPM_DIGEST_SIZE defintion tpm_tis: missing platform_driver_unregister() on error in init_tis() security: clarify cap_inode_getsecctx description apparmor: no need to delay vfree() apparmor: fix fully qualified name parsing apparmor: fix setprocattr arg processing for onexec apparmor: localize getting the security context to a few macros ...
generated by cgit (git 2.34.1) at 2025-09-12 02:39:39 +0000