| Age | Commit message (Collapse) | Author |
|---|
|
Avoid races and block request allocation until io-uring
queues are ready.
This is a especially important for background requests,
as bg request completion might cause lock order inversion
of the typical queue->lock and then fc->bg_lock
fuse_request_end
spin_lock(&fc->bg_lock);
flush_bg_queue
fuse_send_one
fuse_uring_queue_fuse_req
spin_lock(&queue->lock);
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When the fuse-server terminates while the fuse-client or kernel
still has queued URING_CMDs, these commands retain references
to the struct file used by the fuse connection. This prevents
fuse_dev_release() from being invoked, resulting in a hung mount
point.
This patch addresses the issue by making queued URING_CMDs
cancelable, allowing fuse_dev_release() to proceed as expected
and preventing the mount point from hanging.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This prepares queueing and sending background requests through
io-uring.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This prepares queueing and sending foreground requests through
io-uring.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
These functions are also needed by fuse-over-io-uring.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
On teardown struct file_operations::uring_cmd requests
need to be completed by calling io_uring_cmd_done().
Not completing all ring entries would result in busy io-uring
tasks giving warning messages in intervals and unreleased
struct file.
Additionally the fuse connection and with that the ring can
only get released when all io-uring commands are completed.
Completion is done with ring entries that are
a) in waiting state for new fuse requests - io_uring_cmd_done
is needed
b) already in userspace - io_uring_cmd_done through teardown
is not needed, the request can just get released. If fuse server
is still active and commits such a ring entry, fuse_uring_cmd()
already checks if the connection is active and then complete the
io-uring itself with -ENOTCONN. I.e. special handling is not
needed.
This scheme is basically represented by the ring entry state
FRRS_WAIT and FRRS_USERSPACE.
Entries in state:
- FRRS_INIT: No action needed, do not contribute to
ring->queue_refs yet
- All other states: Are currently processed by other tasks,
async teardown is needed and it has to wait for the two
states above. It could be also solved without an async
teardown task, but would require additional if conditions
in hot code paths. Also in my personal opinion the code
looks cleaner with async teardown.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: pci-legacy: Override pci_address_to_pio
MIPS: Loongson64: env: Use str_on_off() helper in prom_lefi_init_env()
MIPS: migrate to generic rule for built-in DTBs
mips: fix shmctl/semctl/msgctl syscall for o32
mips/math-emu: fix emulation of the prefx instruction
MIPS: Loongson: Add comments for interface_info
MIPS: Loongson64: remove ROM Size unit in boardinfo
MIPS: traps: Use str_enabled_disabled() in parity_protection_init()
MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static
Revert "MIPS: csrc-r4k: Select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT"
MIPS: Fix the wrong format specifier
MIPS: Add a blank line after __HEAD
MIPS: kernel: Rename read/write_c0_ecc to read/writec0_errctl
|
|
Pull ARM updates from Russell King:
- fix typos in vfpmodule.c
- drop obsolete VFP accessor fallback for old assemblers
- add cache line identifier register accessor functions
- add cacheinfo support
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9440/1: cacheinfo fix format field mask
ARM: 9433/2: implement cacheinfo support
ARM: 9432/2: add CLIDR accessor functions
ARM: 9438/1: assembler: Drop obsolete VFP accessor fallback
ARM: 9437/1: vfp: Fix typographical errors in vfpmodule.c
|
|
NVIDIA is productizing the new Grace Blackwell superchip
SKU bearing device ID 0x2941.
Add the SKU devid to nvgrace_gpu_vfio_pci_table.
CC: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-5-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In contrast to Grace Hopper systems, the HBM training has been moved
out of the UEFI on the Grace Blackwell systems. This reduces the system
bootup time significantly.
The onus of checking whether the HBM training has completed thus falls
on the module.
The HBM training status can be determined from a BAR0 register.
Similarly, another BAR0 register exposes the status of the CPU-GPU
chip-to-chip (C2C) cache coherent interconnect.
Based on testing, 30s is determined to be sufficient to ensure
initialization completion on all the Grace based systems. Thus poll
these register and check for 30s. If the HBM training is not complete
or if the C2C link is not ready, fail the probe.
While the time is not required on Grace Hopper systems, it is
beneficial to make the check to ensure the device is in an
expected state. Hence keeping it generalized to both the generations.
Ensure that the BAR0 is enabled before accessing the registers.
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Kevin Tian <kevin.tian@intel.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-4-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
There is a HW defect on Grace Hopper (GH) to support the
Multi-Instance GPU (MIG) feature [1] that necessiated the presence
of a 1G region carved out from the device memory and mapped as
uncached. The 1G region is shown as a fake BAR (comprising region 2 and 3)
to workaround the issue.
The Grace Blackwell systems (GB) differ from GH systems in the following
aspects:
1. The aforementioned HW defect is fixed on GB systems.
2. There is a usable BAR1 (region 2 and 3) on GB systems for the
GPUdirect RDMA feature [2].
This patch accommodate those GB changes by showing the 64b physical
device BAR1 (region2 and 3) to the VM instead of the fake one. This
takes care of both the differences.
Moreover, the entire device memory is exposed on GB as cacheable to
the VM as there is no carveout required.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
Link: https://docs.nvidia.com/cuda/gpudirect-rdma/ [2]
Cc: Kevin Tian <kevin.tian@intel.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-3-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
NVIDIA's recently introduced Grace Blackwell (GB) Superchip is a
continuation with the Grace Hopper (GH) superchip that provides a
cache coherent access to CPU and GPU to each other's memory with
an internal proprietary chip-to-chip cache coherent interconnect.
There is a HW defect on GH systems to support the Multi-Instance
GPU (MIG) feature [1] that necessiated the presence of a 1G region
with uncached mapping carved out from the device memory. The 1G
region is shown as a fake BAR (comprising region 2 and 3) to
workaround the issue. This is fixed on the GB systems.
The presence of the fix for the HW defect is communicated by the
device firmware through the DVSEC PCI config register with ID 3.
The module reads this to take a different codepath on GB vs GH.
Scan through the DVSEC registers to identify the correct one and use
it to determine the presence of the fix. Save the value in the device's
nvgrace_gpu_pci_core_device structure.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
CC: Jason Gunthorpe <jgg@nvidia.com>
CC: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-2-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This adds support for fuse request completion through ring SQEs
(FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing
the ring entry it becomes available for new fuse requests.
Handling of requests through the ring (SQE/CQE handling)
is complete now.
Fuse request data are copied through the mmaped ring buffer,
there is no support for any zero copy yet.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Just a single fix to correct the clock rate defined for the internal
timer hardware blocks of the ColdFire 5441x family of SoC devices"
* tag 'm68knommu-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire: Use proper clock rate for timers
|
|
Pull xtensa updates from Max Filippov:
- a few one-liner cleanups
* tag 'xtensa-20250126' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa/simdisk: Use str_write_read() helper in simdisk_transfer()
xtensa: Remove zero-length alignment array
xtensa: annotate dtb_start variable as static __initdata
|
|
Add support for proper cleanup and re-initialization of virtio-blk devices
during transport reset error recovery flow.
This enhancement includes:
- Pre-reset handler (reset_prepare) to perform device-specific cleanup
- Post-reset handler (reset_done) to re-initialize the device
These changes allow the device to recover from various reset scenarios,
ensuring proper functionality after a reset event occurs.
Without this implementation, the device cannot properly recover from
resets, potentially leading to undefined behavior or device malfunction.
This feature has been tested using PCI transport with Function Level
Reset (FLR) as an example reset mechanism. The reset can be triggered
manually via sysfs (echo 1 > /sys/bus/pci/devices/$PCI_ADDR/reset).
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1732690652-3065-3-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Implement support for Function Level Reset (FLR) in virtio_pci devices.
This change adds reset_prepare and reset_done callbacks, allowing
drivers to properly handle FLR operations.
Without this patch, performing and recovering from an FLR is not possible
for virtio_pci devices. This implementation ensures proper FLR handling
and recovery for both physical and virtual functions.
The device reset can be triggered in case of error or manually via
sysfs:
echo 1 > /sys/bus/pci/devices/$PCI_ADDR/reset
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Message-Id: <1732690652-3065-2-git-send-email-israelr@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The specification says the device MUST set num_buffers to 1 if
VIRTIO_NET_F_MRG_RXBUF has not been negotiated.
Fixes: 41e3e42108bc ("vhost/net: enable virtio 1.0")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240915-v1-v1-1-f10d2cb5e759@daynix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Added support to read the vendor-specific PCI capability to identify the
type of device being emulated.
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Message-Id: <20250103153226.1933479-4-sthotton@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Added macro definition for VIRTIO_PCI_CAP_VENDOR_CFG to identify the PCI
vendor data type in the virtio_pci_cap structure. Defined a new struct
virtio_pci_vndr_data for the vendor data capability header as per the
specification.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Message-Id: <20250103153226.1933479-3-sthotton@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The first interrupt of the device is used to notify the host about
device configuration changes, such as link status updates. The ISR
configuration area is updated to indicate a config change event when
triggered.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Message-Id: <20250103153226.1933479-2-sthotton@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Updated the driver to utilize all the MSI-X interrupt vectors supported
by each OCTEON endpoint VF, instead of relying on a single vector.
Enabling more interrupts allows packets from multiple rings to be
distributed across multiple cores, improving parallelism and
performance.
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Message-Id: <20250103153226.1933479-1-sthotton@marvell.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The PCI functions
pcim_iomap_regions()
pcim_iounmap_regions()
pcim_iomap_table()
have been deprecated by the PCI subsystem.
Replace these functions with their successors pcim_iomap_region() and
pcim_iounmap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Message-Id: <20241219094428.21511-2-phasta@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Let's add support for including virtio-mem device RAM in the crash dump,
setting NEED_PROC_VMCORE_DEVICE_RAM, and implementing
elfcorehdr_fill_device_ram_ptload_elf64().
To avoid code duplication, factor out the code to fill a PT_LOAD entry.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-13-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's implement the get_device_ram() vmcore callback, so
architectures that select NEED_PROC_VMCORE_NEED_DEVICE_RAM, like s390
soon, can include that memory in a crash dump.
Merge ranges, and process ranges that might contain a mixture of plugged
and unplugged, to reduce the total number of ranges.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-12-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's remember the usable region size, which will be helpful in kdump
mode next.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-11-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
After the callbacks are registered we may immediately get a callback. So
mark the device ready before registering the callbacks.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-10-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
in 2nd kernel
s390 allocates+prepares the elfcore hdr in the dump (2nd) kernel, not in
the crashed kernel.
RAM provided by memory devices such as virtio-mem can only be detected
using the device driver; when vmcore_init() is called, these device
drivers are usually not loaded yet, or the devices did not get probed
yet. Consequently, on s390 these RAM ranges will not be included in
the crash dump, which makes the dump partially corrupt and is
unfortunate.
Instead of deferring the vmcore_init() call, to an (unclear?) later point,
let's reuse the vmcore_cb infrastructure to obtain device RAM ranges as
the device drivers probe the device and get access to this information.
Then, we'll add these ranges to the vmcore, adding more PT_LOAD
entries and updating the offsets+vmcore size.
Use a separate Kconfig option to be set by an architecture to include this
code only if the arch really needs it. Further, we'll make the config
depend on the relevant drivers (i.e., virtio_mem) once they implement
support (next). The alternative of having a PROVIDE_PROC_VMCORE_DEVICE_RAM
config option was dropped for now for simplicity.
The current target use case is s390, which only creates an elf64
elfcore, so focusing on elf64 is sufficient.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-9-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's factor it out into include/linux/crash_dump.h, from where we can
use it also outside of vmcore.c later.
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-8-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's factor it out into include/linux/crash_dump.h, from where we can
use it also outside of vmcore.c later.
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-7-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These vmcore defines are not related to /proc/kcore, move them out.
We'll move "struct vmcoredd_node" to vmcore.c, because it is only used
internally. While "struct vmcore" is only used internally for now,
we're planning on using it from inline functions in crash_dump.h next,
so move it to crash_dump.h.
While at it, rename "struct vmcore" to "struct vmcore_range", which is a
more suitable name and will make the usage of it outside of vmcore.c
clearer.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-6-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's use "vmcore: " as a prefix, converting the single "Kdump:
vmcore not initialized" one to effectively be "vmcore: not initialized".
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-5-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vmcoredd_update_size() call and its effects (size/offset changes) are
currently completely unsynchronized, and will cause trouble when
performed concurrently, or when done while someone is already reading the
vmcore.
Let's protect all vmcore modifications by the vmcore_mutex, disallow vmcore
modifications while the vmcore is open, and warn on vmcore
modifications after the vmcore was already opened once: modifications
while the vmcore is open are unsafe, and modifications after the vmcore
was opened indicates trouble. Properly synchronize against concurrent
opening of the vmcore.
No need to grab the mutex during mmap()/read(): after we opened the
vmcore, modifications are impossible.
It's worth noting that modifications after the vmcore was opened are
completely unexpected, so failing if open, and warning if already opened
(+closed again) is good enough.
This change not only handles concurrent adding of device dumps +
concurrent reading of the vmcore properly, it also prepares for other
mechanisms that will modify the vmcore.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-4-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that we have a mutex that synchronizes against opening of the vmcore,
let's use that one to replace vmcoredd_mutex: there is no need to have
two separate ones.
This is a preparation for properly preventing vmcore modifications
after the vmcore was opened.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-3-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We want to protect vmcore modifications from concurrent opening of
the vmcore, and also serialize vmcore modification.
(a) We can currently modify the vmcore after it was opened. This can happen
if a vmcoredd is added after the vmcore module was initialized and
already opened by user space. We want to fix that and prepare for
new code wanting to serialize against concurrent opening.
(b) To handle it cleanly we need to protect the modifications against
concurrent opening. As the modifications end up allocating memory and
can sleep, we cannot rely on the spinlock.
Let's convert the spinlock into a mutex to prepare for further changes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20241204125444.1734652-2-david@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Constify struct pci_device_id (Christophe)
- Remove unused code in the sata_gemini driver (David)
- Improve libahci_platform to allow supporting non consecutive port
numbers as specified in device trees (Josua)
- Cleanup ahci driver code handling of port numbers with the new helper
ahci_ignore_port() (me)
- Use pm_sleep_ptr() to remove CONFIG_PM_SLEEP ifdefs in the ahci_st
driver (Raphael). More of these changes will be included in the next
cycle
* tag 'ata-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
ahci: Introduce ahci_ignore_port() helper
ata: libahci_platform: support non-consecutive port numbers
ata: sata_gemini: Remove remaining reset glue
ata: sata_gemini: Remove unused gemini_sata_reset_bridge()
ata: Constify struct pci_device_id
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"Two changes for the 6.14 kernel.
The first change concerns the PCI driver for 1394 OHCI hardware.
Previously, it used legacy PCI suspend/resume callbacks, which have
now been replaced with callbacks defined in the Linux generic power
management framework. This original patch was posted in 2020 and has
been adapted with some modifications for the latest kernel. Note that
the driver still includes platform-specific operations for PowerPC,
and these operations have not been tested in the new implementation
yet. It would be helpful to share the results of suspending/resuming
on the platform.
The other one is a minor fix for the memory allocation in some KUnit
tests"
* tag 'firewire-updates-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: test: Fix potential null dereference in firewire kunit test
firewire: ohci: use generic power management
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu:
- Sign modules with sha512 instead of sha1 by default
- Don't fail module loading when failing to set the
ro_after_init section read-only
- Constify 'struct module_attribute'
- Cleanups and preparation for const struct bin_attribute
- Put known GPL offenders in an array
- Extend the preempt disabled section in
dereference_symbol_descriptor()
* tag 'modules-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: sign with sha512 instead of sha1 by default
module: Don't fail module loading when setting ro_after_init section RO failed
module: Split module_enable_rodata_ro()
module: sysfs: Use const 'struct bin_attribute'
module: sysfs: Add notes attributes through attribute_group
module: sysfs: Simplify section attribute allocation
module: sysfs: Drop 'struct module_sect_attr'
module: sysfs: Drop member 'module_sect_attr::address'
module: sysfs: Drop member 'module_sect_attrs::nsections'
module: Constify 'struct module_attribute'
module: Handle 'struct module_version_attribute' as const
params: Prepare for 'const struct module_attribute *'
module: Put known GPL offenders in an array
module: Extend the preempt disabled section in dereference_symbol_descriptor().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rv and tools/rtla updates from Steven Rostedt:
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features
to at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from
dot2k, there are a few manual steps which can be tedious and error
prone, like adding the tracepoints, makefile lines and kconfig, or
selecting events that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those
steps to make creating a new RV monitor much quicker. It is still
requires to select proper tracepoints, this step is harder to
automate in a general way and, in several cases, would still need
user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set
OSNOISE_WORKLOAD to the proper value ("on" when running with -k,
"off" when running with -u) every time the option is available
instead of setting it only when running with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally
exited earlier run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number
of CPUs (100+), timerlat can generate more samples than rtla is able
to process via tracefs_iterate_raw_events. This is especially common
when the interval is set to 100us (rteval and cyclictest default) as
opposed to the rtla default of 1000us, but also happens with the rtla
default.
Currently, this leads to rtla hanging and having to be terminated
with SIGTERM. SIGINT setting stop_tracing is not enough, since more
and more events are coming and tracefs_iterate_raw_events never
exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no
more events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately
with tracefs_iterate_stop, making rtla exit right away instead of
waiting for all events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses
events, making the tracing results inaccurate.
Count both the number of missed events and the total number of
processed events, and display missed events as well as their
percentage. The numbers are displayed for both osnoise and timerlat,
even though for the earlier, missed events are generally not
expected.
For hist, the number is displayed at the end of the run; for top, it
is displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever
changed, then the code work break. Change the code to encapsulate
this dependency where the code that uses the structure does not have
this dependency.
* tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
rtla: Report missed event count
rtla: Add function to report missed events
rtla: Count all processed events
rtla: Count missed trace events
tools/rtla: Add osnoise_trace_is_off()
rtla/timerlat_top: Set OSNOISE_WORKLOAD for kernel threads
rtla/timerlat_hist: Set OSNOISE_WORKLOAD for kernel threads
rtla/osnoise: Distinguish missing workload option
rtla/timerlat_top: Abort event processing on second signal
rtla/timerlat_hist: Abort event processing on second signal
rtla/timerlat_top: Stop timerlat tracer on signal
rtla/timerlat_hist: Stop timerlat tracer on signal
rtla: Add trace_instance_stop
tools/rtla: Add basic test suite
verification/dot2k: Implement event type detection
verification/dot2k: Auto patch current kernel source
verification/dot2k: Simplify manual steps in monitor creation
rv: Simplify manual steps in monitor creation
verification/dot2k: Add support for name and description options
verification/dot2k: More robust template variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier and osnoise fixes from Steven Rostedt:
- Reset idle tasks on reset for runtime verifier
When the runtime verifier is reset, it resets the task's data that is
being monitored. But it only iterates for_each_process() which does
not include the idle tasks. As the idle tasks can be monitored, they
need to be reset as well.
- Fix the enabling and disabling of tracepoints in osnoise
If timerlat is enabled and the WORKLOAD flag is not set, then the
osnoise tracer will enable the migrate task tracepoint to monitor it
for its own workload. The test to enable the tracepoint is done
against user space modifiable parameters. On disabling of the tracer,
those same parameters are used to determine if the tracepoint should
be disabled. The problem is if user space were to modify the
parameters after it enables the tracer then it may not disable the
tracepoint.
Instead, a static variable is used to keep track if the tracepoint
was enabled or not. Then when the tracer shuts down, it will use this
variable to decide to disable the tracepoint or not, instead of
looking at the user space parameters.
* tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Fix resetting of tracepoints
rv: Reset per-task monitors also for idle tasks
|
|
Pull bitmap updates from Yury Norov:
"This includes const_true() series from Vincent Mailhol, another
__always_inline rework from Nathan Chancellor for RISCV, and a couple
of random fixes from Dr. David Alan Gilbert and I Hsin Cheng"
* tag 'bitmap-for-6.14' of https://github.com:/norov/linux:
cpumask: Rephrase comments for cpumask_any*() APIs
cpu: Remove unused init_cpu_online
riscv: Always inline bitops
linux/bits.h: simplify GENMASK_INPUT_CHECK()
compiler.h: add const_true()
|
|
The maximum number of load/store watchpoints and fetch instruction
watchpoints is 14 each according to LoongArch Reference Manual, so
extend the maximum number of watchpoints from 8 to 14 for ptrace.
By the way, just simply change 8 to 14 for the definition in struct
user_watch_state at the beginning, but it may corrupt uapi, then add
a new struct user_watch_state_v2 directly.
As far as I can tell, the only users for this struct in the userspace
are GDB and LLDB, there are no any problems of software compatibility
between the application and kernel according to the analysis.
The compatibility problem has been considered while developing and
testing. When the applications in the userspace get watchpoint state,
the length will be specified which is no bigger than the sizeof struct
user_watch_state or user_watch_state_v2, the actual length is assigned
as the minimal value of the application and kernel in the generic code
of ptrace:
kernel/ptrace.c: ptrace_regset():
kiov->iov_len = min(kiov->iov_len,
(__kernel_size_t) (regset->n * regset->size));
if (req == PTRACE_GETREGSET)
return copy_regset_to_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
else
return copy_regset_from_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
For example, there are four kind of combinations, all of them work well.
(1) "older kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200;
(2) "newer kernel + newer gdb", the actual length is 8+(8+8+4+4)*14=344;
(3) "older kernel + newer gdb", the actual length is 8+(8+8+4+4)*8=200;
(4) "newer kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200.
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Fixes: 1a69f7a161a7 ("LoongArch: ptrace: Expose hardware breakpoints to debuggers")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The maximum number of load/store watchpoints and fetch instruction
watchpoints is 14 each according to LoongArch Reference Manual, so
change 8 to 14 for the related code.
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Fixes: edffa33c7bb5 ("LoongArch: Add hardware breakpoints/watchpoints support")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We need to switch SFB (Store Fill Buffer) and TSO (Total Store Order)
state at runtime to debug memory management and KVM virtualization, so
add two debugfs entries "sfb_state" and "tso_state" under the directory
/sys/kernel/debug/loongarch.
Query SFB:
cat /sys/kernel/debug/loongarch/sfb_state
Enable SFB:
echo 1 > /sys/kernel/debug/loongarch/sfb_state
Disable SFB:
echo 0 > /sys/kernel/debug/loongarch/sfb_state
Query TSO:
cat /sys/kernel/debug/loongarch/tso_state
Switch TSO:
echo [TSO] > /sys/kernel/debug/loongarch/tso_state
Available [TSO] states:
0 (No Load No Store) 1 (All Load No Store) 3 (Same Load No Store)
4 (No Load All Store) 5 (All Load All Store) 7 (Same Load All Store)
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(),
and the later one may call the preempt_schedule_common() function,
resulting in a thread switch and causing the CPU to be in an interrupt
enabled state after the enable_gpe_wakeup() function returns, leading
to the warnings as follow.
[ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8
[ C0] ...
[ C0] Call Trace:
[ C0] [<90000000002243b4>] show_stack+0x64/0x188
[ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88
[ C0] [<90000000002687e4>] __warn+0x8c/0x148
[ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0
[ C0] [<90000000016478e4>] do_bp+0x204/0x3b8
[ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000
[ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8
[ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0
[ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378
[ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388
[ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48
[ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8
[ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80
[ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98
[ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48
[ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8
[ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48
[ C0] [<9000000001646bc8>] do_vint+0x80/0xe0
[ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8
[ C0] [<900000000164e34c>] __schedule+0x314/0xa48
[ C0] [<900000000164ead8>] schedule+0x58/0xf0
[ C0] [<9000000000294a2c>] worker_thread+0x224/0x498
[ C0] [<900000000029d2f0>] kthread+0xf8/0x108
[ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4
[ C0]
[ C0] ---[ end trace 0000000000000000 ]---
The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect
acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause
a thread switch. Since there is no longer concurrent execution during
loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes()
directly in enable_gpe_wakeup().
The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid
breaking S3 wakeup due to might_sleep()").
Fixes: 366bb35a8e48 ("LoongArch: Add suspend (ACPI S3) support")
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Switch away from using sha1 for module signing by default and use the
more modern sha512 instead, which is what among others Arch, Fedora,
RHEL, and Ubuntu are currently using for their kernels.
Sha1 has not been considered secure against well-funded opponents since
2005[1]; since 2011 the NIST and other organizations furthermore
recommended its replacement[2]. This is why OpenSSL on RHEL9, Fedora
Linux 41+[3], and likely some other current and future distributions
reject the creation of sha1 signatures, which leads to a build error of
allmodconfig configurations:
80A20474797F0000:error:03000098:digital envelope routines:do_sigver_init:invalid digest:crypto/evp/m_sigver.c:342:
make[4]: *** [.../certs/Makefile:53: certs/signing_key.pem] Error 1
make[4]: *** Deleting file 'certs/signing_key.pem'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [.../scripts/Makefile.build:478: certs] Error 2
make[2]: *** [.../Makefile:1936: .] Error 2
make[1]: *** [.../Makefile:224: __sub-make] Error 2
make[1]: Leaving directory '...'
make: *** [Makefile:224: __sub-make] Error 2
This change makes allmodconfig work again and sets a default that is
more appropriate for current and future users, too.
Link: https://www.schneier.com/blog/archives/2005/02/cryptanalysis_o.html [1]
Link: https://csrc.nist.gov/projects/hash-functions [2]
Link: https://fedoraproject.org/wiki/Changes/OpenSSLDistrustsha1SigVer [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: kdevops <kdevops@lists.linux.dev> [0]
Link: https://github.com/linux-kdevops/linux-modules-kpd/actions/runs/11420092929/job/31775404330 [0]
Link: https://lore.kernel.org/r/52ee32c0c92afc4d3263cea1f8a1cdc809728aff.1729088288.git.linux@leemhuis.info
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
Once module init has succeded it is too late to cancel loading.
If setting ro_after_init data section to read-only fails, all we
can do is to inform the user through a warning.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/all/20230915082126.4187913-1-ruanjinjie@huawei.com/
Fixes: d1909c022173 ("module: Don't ignore errors from set_memory_XX()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/d6c81f38da76092de8aacc8c93c4c65cb0fe48b8.1733427536.git.christophe.leroy@csgroup.eu
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
