summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-04firewire: ohci: flush AT contexts after bus reset - addendumStefan Richter
Add comments - on why bus_reset_tasklet flushes AT queues, - that commit 76f73ca1b291 can possibly be reverted now. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Jarod Wilson <jarod@redhat.com>
2011-01-04ipmi: explicitly include of_address.h and of_irq.hRob Herring
of_address.h and of_irq.h are implicitly included on powerpc. Adding them fixes builds on non-powerpc platforms. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-04perf timechart: Adjust perf timechart to the new power eventsThomas Renninger
builtin-timechart must only pass -e power:xy events if they are supported by the running kernel, otherwise try to fetch the old power:power{start,end} events. For this I added the tiny helper function: int is_valid_tracepoint(const char *event_string) to parse-events.[hc], which could be more generic as an interface and support hardware/software/... events, not only tracepoints, but someone else could extend that if needed... Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Jean Pihet <j-pihet@ti.com> LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04perf: Clean up power events by introducing new, more generic onesThomas Renninger
Add these new power trace events: power:cpu_idle power:cpu_frequency power:machine_suspend The old C-state/idle accounting events: power:power_start power:power_end Have now a replacement (but we are still keeping the old tracepoints for compatibility): power:cpu_idle and power:power_frequency is replaced with: power:cpu_frequency power:machine_suspend is newly introduced. Jean Pihet has a patch integrated into the generic layer (kernel/power/suspend.c) which will make use of it. the type= field got removed from both, it was never used and the type is differed by the event type itself. perf timechart userspace tool gets adjusted in a separate patch. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04perf: Do not export power_frequency, but power_start eventThomas Renninger
power_frequency moved to drivers/cpufreq/cpufreq.c which has to be compiled in, no need to export it. intel_idle can a be module though... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: rjw@sisk.pl LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
2011-01-04Merge branch 'perf/test' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2011-01-04Merge commit 'v2.6.37-rc8' into perf/coreIngo Molnar
Merge reason: pick up latest -rc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-04gameport: use this_cpu_read instead of lookupChristoph Lameter
Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-04x86: udelay: Use this_cpu_read to avoid address calculationChristoph Lameter
The code will use a segment prefix instead of doing the lookup and calculation. Signed-off-by: Christoph Lameter <cl@linux.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-01-03cnic: Do not call bnx2i when bnx2i is calling cnic_unregister_driver()Michael Chan
We should call bnx2i to send the iSCSI netlink message earlier in cnic_unregister_device(). By the time cnic_unregister_driver() is called, bnx2i may have freed data structures used by the upcalls. Update version to 2.2.12. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03cnic: Do not allow iSCSI and FCoE on bnx2x multi-function modeMichael Chan
Because the hardware does not yet support these in this mode. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03sparc: explicitly cast negative phandle checks to s32Andres Salomon
When we switched sparc from using 'int's to 'phandle's (which is a u32), we neglected to do anything with the various checks for -1. For those tests, explicitly cast the phandles to s32. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-04perf test: Add test for counting open syscallsArnaldo Carvalho de Melo
To test the use of the perf_evsel class on something other than the tools from where we refactored code to create it. It calls open() N times and then checks if the event created to monitor it returns N events. [acme@felicio linux]$ perf test 1: vmlinux symtab matches kallsyms: Ok 2: detect open syscall event: Ok [acme@felicio linux]$ It does. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Han Pingtian <phan@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Auto allocate resources needed for some methodsArnaldo Carvalho de Melo
While writing the first user of the routines created from the ad-hoc routines in the existing builtins I noticed that the resulting set of calls was too long, reduce it by doing some best effort allocations. Tools that need to operate on multiple threads and cpus should pre-allocate enough resources by explicitely calling the perf_evsel__alloc_{fd,counters} methods. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Use {cpu,thread}_map to shorten list of parametersArnaldo Carvalho de Melo
Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf tools: Refactor all_tids to hold nr and the mapArnaldo Carvalho de Melo
So that later, we can pass the thread_map instance instead of (thread_num, thread_map) for things like perf_evsel__open and friends, just like was done with cpu_map. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf tools: Refactor cpumap to hold nr and the mapArnaldo Carvalho de Melo
So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map) for things like perf_evsel__open and friends. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Introduce per cpu and per thread open helpersArnaldo Carvalho de Melo
Abstracting away the loops needed to create the various event fd handlers. The users have to pass a confiruged perf->evsel.attr field, which is already usable after perf_evsel__new (constructor) time, using defaults. Comes out of the ad-hoc routines in builtin-stat, that now uses it. Fixed a small silly bug where we were die()ing before killing our children, dysfunctional family this one 8-) Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-04perf evsel: Steal the counter reading routines from statArnaldo Carvalho de Melo
Making them hopefully generic enough to be used in 'perf test', well see. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-01-03Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: pxa: fix page table corruption on resume ARM: it8152: add IT8152_LAST_IRQ definition to fix build error ARM: pxa: PXA_ESERIES depends on FB_W100. ARM: 6605/1: Add missing include "asm/memory.h" ARM: 6540/1: Stop irqsoff trace on return to user ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers ARM: 6536/1: Add missing SZ_{32,64,128} ARM: fix cache-feroceon-l2 after stack based kmap_atomic() ARM: fix cache-xsc3l2 after stack based kmap_atomic() ARM: get rid of kmap_high_l1_vipt() ARM: smp: avoid incrementing mm_users on CPU startup ARM: pxa: PXA_ESERIES depends on FB_W100.
2011-01-03arch/mn10300/kernel/irq.c: fix buildAndrew Morton
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702 Reported-by: Martin Ettl <ettl.martin@gmx.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-03ima: fix add LSM rule bugMimi Zohar
If security_filter_rule_init() doesn't return a rule, then not everything is as fine as the return code implies. This bug only occurs when the LSM (eg. SELinux) is disabled at runtime. Adding an empty LSM rule causes ima_match_rules() to always succeed, ignoring any remaining rules. default IMA TCB policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 # SYSFS_MAGIC dont_measure fsmagic=0x62656572 # DEBUGFS_MAGIC dont_measure fsmagic=0x64626720 # TMPFS_MAGIC dont_measure fsmagic=0x01021994 # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 < LSM specific rule > dont_measure obj_type=var_log_t measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 Thus without the patch, with the boot parameters 'tcb selinux=0', adding the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB measurement policy, would result in nothing being measured. The patch prevents the default TCB policy from being replaced. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: David Safford <safford@watson.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-03powerpc/405: Fix missing #{address,size}-cells in i2c nodeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03powerpc/5200: dts: refactor dts filesJohn Bonesio
This patch creates mpc5200b.dtsi containing the information for the MPC5200b SoC then modifies all of the dts files for MPC5200b based systems to use mpc5200b.dtsi. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03powerpc/5200: dts: Change combatible strings on localbusJohn Bonesio
This patch changes some incorrect compatible strings on the local plus bus node in dts files for MPC5200b based systems. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03powerpc/5200: dts: remove unused propertiesJohn Bonesio
This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03powerpc/5200: dts: rename nodes to prepare for refactoring dts filesJohn Bonesio
This patch renames nodes in dts fils for MPC5200b files to prepare for refactoring of these files later. When refactoring it will be easier to verify the results if the node names aren't changing at the same time. Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03of/flattree: Update dtc to current mainline.John Bonesio
Pull in recent changes from the main dtc repository. These changes primarily allow multiple device trees to be declared which are merged by dtc. This feature allows us to include a basic dts file and then provide more information for the specific system through the merging functionality. Changes pulled from git://git.jdl.com/software/dtc.git commit id: 37c0b6a0, "dtc: Add code to make diffing trees easier" Signed-off-by: John Bonesio <bones@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03of/device: Don't register disabled devicesGrant Likely
Device nodes with the property status="disabled" are not usable and so don't register them when parsing the device tree for devices. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Hollis Blanchard <hollis_blanchard@mentor.com> Cc: Deepak Saxena <deepak_saxena@mentor.com> Cc: Scott Wood <scottwood@freescale.com>, Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-03ARM: 6607/1: sa1100: Update platform device registrationJochen Friedrich
Replace some magic numbers with constants and add interrupt definitions. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-03ARM: 6606/1: sa1100: Fix platform device registrationJochen Friedrich
Since commit 7a5b4e16c880f8350d255dc188f81622905618c1, simpad devices don't boot anymore, since platform devices are registered too early. Fix by moving the registration from map_io to arch_initcall as done on other sa1100 boards. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-03Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2011-01-03firewire: ohci: flush AT contexts after bus reset for OHCI 1.2Clemens Ladisch
The OHCI 1.2 (draft) specification, clause 7.2.3.3, allows and recommends that, after a bus reset, the controller does not flush all the packets in the AT queues. Therefore, the driver has to do this itself. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-01-03net/bridge: fix trivial sparse errorsTomas Winkler
net/bridge//br_stp_if.c:148:66: warning: conversion of net/bridge//br_stp_if.c:148:66: int to net/bridge//br_stp_if.c:148:66: int enum umh_wait net/bridge//netfilter/ebtables.c:1150:30: warning: Using plain integer as NULL pointer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03depca: Fix section mismatch derived from depca_isa_probe()Sedat Dilek
This fixes the following warning: WARNING: drivers/net/depca.o(.data+0x0): Section mismatch in reference from the variable depca_isa_driver to the function .init.text:depca_isa_probe() The variable depca_isa_driver references the function __init depca_isa_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Tested with linux-next (next-20101231) Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03smsc-ircc2: Fix section mismatch derived from smsc_ircc_pnp_probe()Sedat Dilek
This fixes the following warning: drivers/net/irda/smsc-ircc2.o(.data+0x18): Section mismatch in reference from the variable smsc_ircc_pnp_driver to the function .init.text:smsc_ircc_pnp_probe() The variable smsc_ircc_pnp_driver references the function __init smsc_ircc_pnp_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Tested with linux-next (next-20101231) Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03ksz884x: Fix section mismatch derived from pcidev_init()Sedat Dilek
This fixes the following warning: WARNING: drivers/net/ksz884x.o(.data+0x18): Section mismatch in reference from the variable pci_device_driver to the function .init.text:pcidev_init() The variable pci_device_driver references the function __init pcidev_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Tested with linux-next (next-20101231) Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03powerpc/dts: fix syntax bugs in bluestone.dtsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03of: Fixes for OF probing on little endian systemsRob Herring
Fixes for sdhci-of and ipmi drivers. Auditing all drivers using of_get_property did not find other occurrences likely to be used on LE platforms. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OFRob Herring
Some OF drivers could likely be used on non-powerpc OF based platforms, so fix the kconfig depends to be CONFIG_OF instead of CONFIG_PPC_OF. Compile tested on ARM and sparc. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-03ifb: add performance flagsEric Dumazet
Le lundi 03 janvier 2011 à 11:40 -0800, David Miller a écrit : > From: Jarek Poplawski <jarkao2@gmail.com> > Date: Mon, 3 Jan 2011 20:37:03 +0100 > > > On Sun, Jan 02, 2011 at 09:24:36PM +0100, Eric Dumazet wrote: > >> Le mercredi 29 décembre 2010 ?? 00:07 +0100, Jarek Poplawski a écrit : > >> > >> > Ingress is before vlans handler so these features and the > >> > NETIF_F_HW_VLAN_TX flag seem useful for ifb considering > >> > dev_hard_start_xmit() checks. > >> > >> OK, here is v2 of the patch then, thanks everybody. > >> > >> > >> [PATCH v2 net-next-2.6] ifb: add performance flags > >> > >> IFB can use the full set of features flags (NETIF_F_SG | > >> NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) to > >> avoid unnecessary split of some packets (GRO for example) > >> > >> Changli suggested to also set vlan_features, > > > > He also suggested more GSO flags of which especially NETIF_F_TSO6 > > seems interesting (wrt GRO)? > > I think at least TSO6 would very much be appropriate here. Yes, why not, I am only wondering why loopback / dummy (and others ?) only set NETIF_F_TSO :) Since I want to play with ECN, I might also add NETIF_F_TSO_ECN ;) For other flags, I really doubt it can matter on ifb ? [PATCH v3 net-next-2.6] ifb: add performance flags IFB can use the full set of features flags (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) to avoid unnecessary split of some packets (GRO for example) Changli suggested to also set vlan_features, NETIF_F_TSO6, NETIF_F_TSO_ECN. Jarek suggested to add NETIF_F_HW_VLAN_TX as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Changli Gao <xiaosuo@gmail.com> Cc: Jarek Poplawski <jarkao2@gmail.com> Cc: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03sparc: fix sparse warnings in arch/sparc/prom for 32 bit buildSam Ravnborg
Fix following sparse warnings: arch/sparc/prom/bootstr_32.c:32:35: warning: Using plain integer as NULL pointer arch/sparc/prom/memory.c:61:13: warning: symbol 'prom_meminit' was not declared. Should it be static? arch/sparc/prom/misc_32.c:74:1: error: symbol 'prom_halt' redeclared with different type (originally declared at arch/sparc/include/asm/oplib_32.h:67) - different modifiers arch/sparc/prom/ranges.c:16:26: warning: symbol 'promlib_obio_ranges' was not declared. Should it be static? arch/sparc/prom/ranges.c:17:5: warning: symbol 'num_obio_ranges' was not declared. Should it be static? arch/sparc/prom/ranges.c:39:1: warning: symbol 'prom_adjust_ranges' was not declared. Should it be static? arch/sparc/prom/ranges.c:69:13: warning: symbol 'prom_ranges_init' was not declared. Should it be static? arch/sparc/prom/tree_32.c:286:22: warning: Using plain integer as NULL pointer arch/sparc/prom/tree_32.c:286:38: warning: Using plain integer as NULL pointer None of the warnings indicated any serious issues. We are now sparse clean for 32 bit build in arch/sparc/prom. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03sch_red: report backlog informationEric Dumazet
Provide child qdisc backlog (byte count) information so that "tc -s qdisc" can report it to user. packet count is already correctly provided. qdisc red 11: parent 1:11 limit 60Kb min 15Kb max 45Kb ecn Sent 3116427684 bytes 1415782 pkt (dropped 8, overlimits 7866 requeues 0) rate 242385Kbit 13630pps backlog 13560b 8p requeues 0 marked 7865 early 1 pdrop 7 other 0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03dcbnl: more informed return values for new dcbnl routinesShmulik Ravid
More accurate return values for the following (new) dcbnl routines: dcbnl_getdcbx() dcbnl_setdcbx() dcbnl_getfeatcfg() dcbnl_setfeatcfg() Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03bridge: stp: ensure mac header is setFlorian Westphal
commit bf9ae5386bca8836c16e69ab8fdbe46767d7452a (llc: use dev_hard_header) removed the skb_reset_mac_header call from llc_mac_hdr_init. This seems fine itself, but br_send_bpdu() invokes ebtables LOCAL_OUT. We oops in ebt_basic_match() because it assumes eth_hdr(skb) returns a meaningful result. Cc: acme@ghostprotocols.net References: https://bugzilla.kernel.org/show_bug.cgi?id=24532 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03ll_temac: Fix section mismatch from the temac_of_probeMichal Simek
Replace __init by __devinit. Warning message: WARNING: vmlinux.o(.data+0xbc14): Section mismatch in reference from the variable temac_of_driver to the function .init.text:temac_of_probe() The variable temac_of_driver references the function __init temac_of_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03trivial: Fix typo fault in netdevice.hMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03netxen: update driver version 4.0.75amit salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03netxen: enable LRO based on NETIF_F_LROSucheta Chakraborty
o Enable/disable LRO in device based on NETIF_F_LRO flag, instead of using driver private flag. o Disable LRO, if rx csum offloading is off. David Miller, You should use netdev_info() instead of dev_info(). Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix callchain hit bad cast on ascii display arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPU watchdog: Improve initialisation error message and documentation
generated by cgit (git 2.34.1) at 2025-09-30 09:44:09 +0000