summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-29Merge tag 'omap-for-v3.12/fixes-non-critical-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical From Tony Lindgren: Omap fixes for the merge window that are not urgent enough for the -rc series. * tag 'omap-for-v3.12/fixes-non-critical-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start' ARM: OMAP2: remove useless variable 'ret' ARM: OMAP: dma: fix error return code in omap_system_dma_probe() ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards ARM: OMAP2: Use a consistent AM33XX SoC option description ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC + Linux 3.11-rc6
2013-08-29ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASKTony Lindgren
This is needed to prevent a build error with a patch queued for fixes "ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards". Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29mmc: dw_mmc: Add support for ARCMischa Jonker
Adapt Kconfig to include ARC in supported architectures Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherentJoe Perches
__GFP_ZERO is an uncommon flag and perhaps is better not used. static inline dma_zalloc_coherent exists so convert the uses of dma_alloc_coherent with __GFP_ZERO to the more common kernel style with zalloc. Remove memset from the static inline dma_zalloc_coherent and add just one use of __GFP_ZERO instead. Trivially reduces the size of the existing uses of dma_zalloc_coherent. Realign arguments as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29pkt_sched: fq: Fair Queue packet schedulerEric Dumazet
- Uses perfect flow match (not stochastic hash like SFQ/FQ_codel) - Uses the new_flow/old_flow separation from FQ_codel - New flows get an initial credit allowing IW10 without added delay. - Special FIFO queue for high prio packets (no need for PRIO + FQ) - Uses a hash table of RB trees to locate the flows at enqueue() time - Smart on demand gc (at enqueue() time, RB tree lookup evicts old unused flows) - Dynamic memory allocations. - Designed to allow millions of concurrent flows per Qdisc. - Small memory footprint : ~8K per Qdisc, and 104 bytes per flow. - Single high resolution timer for throttled flows (if any). - One RB tree to link throttled flows. - Ability to have a max rate per flow. We might add a socket option to add per socket limitation. Attempts have been made to add TCP pacing in TCP stack, but this seems to add complex code to an already complex stack. TCP pacing is welcomed for flows having idle times, as the cwnd permits TCP stack to queue a possibly large number of packets. This removes the 'slow start after idle' choice, hitting badly large BDP flows, and applications delivering chunks of data as video streams. Nicely spaced packets : Here interface is 10Gbit, but flow bottleneck is ~20Mbit cwin is big, yet FQ avoids the typical bursts generated by TCP (as in netperf TCP_RR -- -r 100000,100000) 15:01:23.545279 IP A > B: . 78193:81089(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.545394 IP B > A: . ack 81089 win 3668 <nop,nop,timestamp 11597985 1115> 15:01:23.546488 IP A > B: . 81089:83985(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.546565 IP B > A: . ack 83985 win 3668 <nop,nop,timestamp 11597986 1115> 15:01:23.547713 IP A > B: . 83985:86881(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.547778 IP B > A: . ack 86881 win 3668 <nop,nop,timestamp 11597987 1115> 15:01:23.548911 IP A > B: . 86881:89777(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.548949 IP B > A: . ack 89777 win 3668 <nop,nop,timestamp 11597988 1115> 15:01:23.550116 IP A > B: . 89777:92673(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.550182 IP B > A: . ack 92673 win 3668 <nop,nop,timestamp 11597989 1115> 15:01:23.551333 IP A > B: . 92673:95569(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.551406 IP B > A: . ack 95569 win 3668 <nop,nop,timestamp 11597991 1115> 15:01:23.552539 IP A > B: . 95569:98465(2896) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.552576 IP B > A: . ack 98465 win 3668 <nop,nop,timestamp 11597992 1115> 15:01:23.553756 IP A > B: . 98465:99913(1448) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.554138 IP A > B: P 99913:100001(88) ack 65248 win 3125 <nop,nop,timestamp 1115 11597805> 15:01:23.554204 IP B > A: . ack 100001 win 3668 <nop,nop,timestamp 11597993 1115> 15:01:23.554234 IP B > A: . 65248:68144(2896) ack 100001 win 3668 <nop,nop,timestamp 11597993 1115> 15:01:23.555620 IP B > A: . 68144:71040(2896) ack 100001 win 3668 <nop,nop,timestamp 11597993 1115> 15:01:23.557005 IP B > A: . 71040:73936(2896) ack 100001 win 3668 <nop,nop,timestamp 11597993 1115> 15:01:23.558390 IP B > A: . 73936:76832(2896) ack 100001 win 3668 <nop,nop,timestamp 11597993 1115> 15:01:23.559773 IP B > A: . 76832:79728(2896) ack 100001 win 3668 <nop,nop,timestamp 11597993 1115> 15:01:23.561158 IP B > A: . 79728:82624(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.562543 IP B > A: . 82624:85520(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.563928 IP B > A: . 85520:88416(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.565313 IP B > A: . 88416:91312(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.566698 IP B > A: . 91312:94208(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.568083 IP B > A: . 94208:97104(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.569467 IP B > A: . 97104:100000(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.570852 IP B > A: . 100000:102896(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.572237 IP B > A: . 102896:105792(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.573639 IP B > A: . 105792:108688(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.575024 IP B > A: . 108688:111584(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.576408 IP B > A: . 111584:114480(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> 15:01:23.577793 IP B > A: . 114480:117376(2896) ack 100001 win 3668 <nop,nop,timestamp 11597994 1115> TCP timestamps show that most packets from B were queued in the same ms timeframe (TSval 1159799{3,4}), but FQ managed to send them right in time to avoid a big burst. In slow start or steady state, very few packets are throttled [1] FQ gets a bunch of tunables as : limit : max number of packets on whole Qdisc (default 10000) flow_limit : max number of packets per flow (default 100) quantum : the credit per RR round (default is 2 MTU) initial_quantum : initial credit for new flows (default is 10 MTU) maxrate : max per flow rate (default : unlimited) buckets : number of RB trees (default : 1024) in hash table. (consumes 8 bytes per bucket) [no]pacing : disable/enable pacing (default is enable) All of them can be changed on a live qdisc. $ tc qd add dev eth0 root fq help Usage: ... fq [ limit PACKETS ] [ flow_limit PACKETS ] [ quantum BYTES ] [ initial_quantum BYTES ] [ maxrate RATE ] [ buckets NUMBER ] [ [no]pacing ] $ tc -s -d qd qdisc fq 8002: dev eth0 root refcnt 32 limit 10000p flow_limit 100p buckets 256 quantum 3028 initial_quantum 15140 Sent 216532416 bytes 148395 pkt (dropped 0, overlimits 0 requeues 14) backlog 0b 0p requeues 14 511 flows, 511 inactive, 0 throttled 110 gc, 0 highprio, 0 retrans, 1143 throttled, 0 flows_plimit [1] Except if initial srtt is overestimated, as if using cached srtt in tcp metrics. We'll provide a fix for this issue. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29mmc: sdhci-s3c: initialize host->quirks2 for using quirks2Jaehoon Chung
In order to use the quirks2, initialized the host->quirks2. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <Kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29mmc: sdhci-s3c: fix the wrong register value, when clock is disabledJaehoon Chung
When use the QUIRK_NONSTANDARD_CLOCK, then never set to 0 at clock control register. This patch fixes this problem. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-29clk/exynos5420: assign dout_pixel id to pixel clock dividerRahul Sharma
dout_pixel is a new ID allocated for pixel clock divider. It is queried in the driver to pass as the parent to hdmi clock while switching between parents. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk/exynos5420: add hdmi mux to change parents in hdmi driverRahul Sharma
hdmi driver needs to change the parent of hdmi clock to pixel clock or hdmiphy clock, based on the stability of hdmiphy. This patch is exposing the mux for changing the parent. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk/exynos5420: fix the order of parents of hdmi muxRahul Sharma
Listing sclk_hdmiphy at 0th position in the list of parents is causing wrong configuration in reg SRC_DISP10. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk/exynos5420: add gate clock for mixer sysmmuRahul Sharma
Adding sysmmu clock for mixer for exynos5420. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk/exynos5420: add sclk_hdmiphy to the list of special clocksRahul Sharma
Add sclk_hdmiphy to the list of exposed clocks. This is required by hdmi driver to change the parent of hdmi clock. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30ARM: shmobile: r8a7779: Update early timer initialisation orderSimon Horman
a894fcc2d01a89e6fe3da0845a4d80a5312e1124 ("ARM: smp_twd: Divorce smp_twd from local timer API") altered twd_local_timer_common_register() so that it may make use of late_timer_init. This is problematic on marzen with Magnus's recent patch "ARM: shmobile: marzen: Switch to DT_MACHINE_START" which switches marzen around to enable USE_OF and thus shmobile_timer_init(), which is registered as late_time_init by shmobile_earlytimer_init() stops being a no-op. As a work-around I have updated r8a7779_earlytimer_init() so that shmobile_earlytimer_init() is called after r8a7779_register_twd(). Or in other words, the shmobile_earlytimer_init() setting of late_time_init overwrites that of twd_local_timer_common_register(). Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se>
2013-08-29clk: wm831x: Provide is_prepared() rather than is_enabled()Mark Brown
Since the driver was written an is_prepared() operation has been made possible. Since the driver uses I2C I/O only prepare operations are provided so move the is_enabled() operation over to is_prepared(). Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29Merge branch 'for-3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "During the percpu reference counting update which was merged during v3.11-rc1, the cgroup destruction path was updated so that a cgroup in the process of dying may linger on the children list, which was necessary as the cgroup should still be included in child/descendant iteration while percpu ref is being killed. Unfortunately, I forgot to update cgroup destruction path accordingly and cgroup destruction may fail spuriously with -EBUSY due to lingering dying children even when there's no live child left - e.g. "rmdir parent/child parent" will usually fail. This can be easily fixed by iterating through the children list to verify that there's no live child left. While this is very late in the release cycle, this bug is very visible to userland and I believe the fix is relatively safe. Thanks Hugh for spotting and providing fix for the issue" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rmdir EBUSY regression in 3.11
2013-08-29Merge branch 'for-3.11-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "This contains one fix which could lead to system-wide lockup on !PREEMPT kernels. It's very late in the cycle but this definitely is a -stable material. The problem is that workqueue worker tasks may process unlimited number of work items back-to-back without every yielding inbetween. This usually isn't noticeable but a work item which re-queues itself waiting for someone else to do something can deadlock with stop_machine. stop_machine will ensure nothing else happens on all other cpus and the requeueing work item will reqeueue itself indefinitely without ever yielding and thus preventing the CPU from entering stop_machine. Kudos to Jamie Liu for spotting and diagnosing the problem. This can be trivially fixed by adding cond_resched() after processing each work item" * 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: cond_resched() after processing each work item
2013-08-29Merge tag 'nfs-for-3.11-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfix from Trond Myklebust: "Stable patch to fix a highmem-related data corruption issue on 32-bit ARM platforms" * tag 'nfs-for-3.11-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix memory corruption issue on 32-bit highmem systems
2013-08-29Merge tag 'bcm-for-3.12-late-soc' of git://github.com/broadcom/bcm11351 into ↵Olof Johansson
next/boards From Christian Daudt, late changes for 3.12 broadcom mmc driver. Small trivial changes so I'll take them through arm-soc. * tag 'bcm-for-3.12-late-soc' of git://github.com/broadcom/bcm11351: mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
2013-08-30Merge tag 'drm-intel-next-2013-08-23' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Need to get my stuff out the door ;-) Highlights: - pc8+ support from Paulo - more vma patches from Ben. - Kconfig option to enable preliminary support by default (Josh Triplett) - Optimized cpu cache flush handling and support for write-through caching of display planes on Iris (Chris) - rc6 tuning from Stéphane Marchesin for more stability - VECS seqno wrap/semaphores fix (Ben) - a pile of smaller cleanups and improvements all over Note that I've ditched Ben's execbuf vma conversion for 3.12 since not yet ready. But there's still other vma conversion stuff in here. * tag 'drm-intel-next-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: (62 commits) drm/i915: Print seqnos as unsigned in debugfs drm/i915: Fix context size calculation on SNB/IVB/VLV drm/i915: Use POSTING_READ in lcpll code drm/i915: enable Package C8+ by default drm/i915: add i915.pc8_timeout function drm/i915: add i915_pc8_status debugfs file drm/i915: allow package C8+ states on Haswell (disabled) drm/i915: fix SDEIMR assertion when disabling LCPLL drm/i915: grab force_wake when restoring LCPLL drm/i915: drop WaMbcDriverBootEnable workaround drm/i915: Cleaning up the relocate entry function drm/i915: merge HSW and SNB PM irq handlers drm/i915: fix how we mask PMIMR when adding work to the queue drm/i915: don't queue PM events we won't process drm/i915: don't disable/reenable IVB error interrupts when not needed drm/i915: add dev_priv->pm_irq_mask drm/i915: don't update GEN6_PMIMR when it's not needed drm/i915: wrap GEN6_PMIMR changes drm/i915: wrap GTIMR changes drm/i915: add the FCLK case to intel_ddi_get_cdclk_freq ...
2013-08-29Merge tag 'omap-for-v3.12/dra7xx-prcm' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/all From Tony Lindgren: Add basic support for devices on dra7xx by adding the PRCM and hwmod parts the same way as for other omaps. This is still needed in addition to device tree support for things like power management. Via Paul Walmsley <paul@pwsan.com>: This series adds basic TI DRA7xx PRCM and hwmod support. Basic test logs are available here: http://www.pwsan.com/omap/testlogs/dra7xx_prcm_devel_v3.12/20130823050445/ Note that DRA7xx could not be tested locally, since I don't have a board. * tag 'omap-for-v3.12/dra7xx-prcm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: DRA7: Enable PM framework initializations ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data ARM: OMAP: DRA7: Reuse the omap44xx_restart and fix the device instance ARM: OMAP: DRA7: powerdomain: Handle missing vc/vp ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters ARM: OMAP: DRA7: CM: Add minimal regbit shifts ARM: OMAP: DRA7: CM: Add DRA7XX register defines ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions ARM: DRA7: Add the build support in omap2plus ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5 ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs' ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512 ARM: DRA7: board-generic: Add basic DT support ARM: DRA7: Resue the clocksource, clockevent support ARM: DRA7: Reuse io tables and add a new .init_early ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29Merge tag 'omap-for-v3.12/prcm-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/all From Tony Lindgren: OMAP PRCM and hwmod fixes and improvments via Paul Walmsley <paul@pwsan.com>: Various OMAP PRCM & hwmod fixes and improvements. Notable changes include: - a fix for OMAP4 PLL locking to avoid a bootloader dependency that causes nasty log spew on startup - AM33xx DEBUGSS support fixes in hwmod data - OMAP5 mailbox support in hwmod data Basic test logs are here: http://www.pwsan.com/omap/testlogs/prcm_a_for_v3.12/20130823125002/ Note that the 3530 failure is due to the mysterious transient serial issue affecting 3530 for several releases now, which causes a log parsing failure. PM still seems to work. * tag 'omap-for-v3.12/prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: AM33xx: clock: Add RNG clock data ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX ARM: OMAP4: clock: Lock PLLs in the right sequence ARM: OMAP: AM33XX: hwmod: Add hwmod data for debugSS ARM: OMAP2+: Only write the sysconfig on idle when necessary ARM: OMAP5: hwmod data: Add mailbox data Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-30drm: Advertise async page flip ability through GETCAP ioctlKeith Packard
Let applications know whether the kernel supports asynchronous page flipping. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add DRM_MODE_PAGE_FLIP_ASYNC flag definitionKeith Packard
This requests that the driver perform the page flip as soon as possible, not necessarily waiting for vblank. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Pass page flip ioctl flags to driverKeith Packard
This lets drivers see the flags requested by the application [airlied: fixup for rcar/imx/msm] Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-29Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
2013-08-30drm/omap: tiler: clear buffer properlyDan Carpenter
We're taking the sizeof() the wrong thing so it doesn't clear the whole buffer. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/prime: Remove PRIME handles only if supportedThierry Reding
Drivers that don't support PRIME will not have initialized the PRIME specific private component of struct drm_file. If called for such drivers, the drm_gem_remove_prime_handles() function will crash. Fix it by checking for PRIME support prior to removing the PRIME handles. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/vmwgfx: Split GMR2_REMAP commands if they are to largeJakob Bornecrantz
This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Biran Paul <brianp@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30Merge tag 'drm-intel-fixes-2013-08-30' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Just a one-line patch to fix a black screen issue on rare ivb machines, cc: stable. Normally I'd just shovel this into the -next pull request this late in the -rc cycle, but Linus was making noises about not getting real fixes which are cc: stable. So here we go ;-) * tag 'drm-intel-fixes-2013-08-30' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: ivb: fix edp voltage swing reg val
2013-08-30drm: Remove the dithering_mode_property fieldDamien Lespiau
Unfortunately, I haven't been thorough enough in: commit ddecb10cf402a8325579f298fd4986a90f33496b Author: Lespiau, Damien <damien.lespiau@intel.com> Date: Tue Aug 20 00:53:04 2013 +0100 drm: Remove drm_mode_create_dithering_property() And forgot to remove the dithering_mode_property member of struct drm_mode_config. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/prime: double lock typoDan Carpenter
There is a typo so deadlocks on error instead of unlocking. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/vmwgfx: fix error return code in vmw_driver_load()Wei Yongjun
Fix to return -ENOMEM in the fence manager init error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: implement experimental render nodesDavid Herrmann
Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-30video/hdmi: Rename HDMI_IDENTIFIER to HDMI_IEEE_OUILespiau, Damien
HDMI_IDENTIFIER was felt too generic, rename it to what it is, the IEEE OUI corresponding to HDMI Licensing, LLC. http://standards.ieee.org/develop/regauth/oui/oui.txt Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/i915/hdmi: Write HDMI vendor specific infoframesLespiau, Damien
With all the common infoframe bits now in place, we can finally write the vendor specific infoframes in our driver. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add a helper to forge HDMI vendor infoframesLespiau, Damien
This can then be used by DRM drivers to setup their vendor infoframes. v2: Fix hmdi typo (Simon Farnsworth) v3: Adapt to the hdmi_vendor_infoframe rename Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Use hdmi_vendor_infoframe for the HDMI specific infoframeLespiau, Damien
We just got rid of the version of hdmi_vendor_infoframe that had a byte array for anyone to poke at. It's now time to shuffle around the naming of hdmi_hdmi_infoframe to make hdmi_vendor_infoframe become the HDMI vendor specific structure. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Hook the HDMI vendor infoframe with the generic _pack()Lespiau, Damien
With this last bit, hdmi_infoframe_pack() is now able to pack any infoframe we support. At the same time, because it's impractical to make two commits out of this, we get rid of the version that encourages the open coding of the vendor infoframe packing. We can do so because the only user of this API has been ported in: Author: Damien Lespiau <damien.lespiau@intel.com> Date: Mon Aug 12 18:08:37 2013 +0100 gpu: host1x: Port the HDMI vendor infoframe code the common helpers v2: Change oui to be an unsigned int (Ville Syrjälä) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Move HDMI_IDENTIFIER to hdmi.hLespiau, Damien
We'll need the HDMI OUI for the HDMI vendor infoframe data, so let's move the DRM one to hdmi.h, might as well use the hdmi header to store some hdmi defines. (Note that, in fact, infoframes are part of the CEA-861 standard, and only the HDMI vendor specific infoframe is special to HDMI, but details..) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30gpu: host1x: Port the HDMI vendor infoframe code the common helpersLespiau, Damien
I just wrote the bits to define and pack HDMI vendor specific infoframe. Port the host1x driver to use those so I can refactor the infoframe code a bit more. This changes the length of the infoframe payload from 6 to 5, which is enough for the "frame packing" stereo format. v2: Pimp up the commit message with the note about the length (Ville Syrjälä) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Terje Bergström <tbergstrom@nvidia.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Introduce helpers for the HDMI vendor specific infoframeLespiau, Damien
Provide the same programming model than the other infoframe types. The generic _pack() function can't handle those yet as we need to move the vendor OUI in the generic hdmi_vendor_infoframe structure to know which kind of vendor infoframe we are dealing with. v2: Fix the value of Side-by-side (half), hmdi typo, pack 3D_Ext_Data (Ville Syrjälä) v3: Future proof the sending of 3D_Ext_Data (Ville Syrjälä), Fix multi-lines comment style (Thierry Reding) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Derive the bar data valid bit from the bar data fieldsLespiau, Damien
Just like: Author: Damien Lespiau <damien.lespiau@intel.com> Date: Mon Aug 12 11:53:24 2013 +0100 video/hdmi: Don't let the user of this API create invalid infoframes But this time for the horizontal/vertical bar data present bits. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Don't let the user of this API create invalid infoframesLespiau, Damien
To set the active aspect ratio value in the AVI infoframe today, you not only have to set the active_aspect field, but also the active_info_valid bit. Out of the 1 user of this API, we had 100% misuse, forgetting the _valid bit. This was fixed in: Author: Damien Lespiau <damien.lespiau@intel.com> Date: Tue Aug 6 20:32:17 2013 +0100 drm: Don't generate invalid AVI infoframes for CEA modes We can do better and derive the _valid bit from the user wanting to set the active aspect ratio. v2: Fix multi-lines comment style (Thierry Reding) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add support for alternate clocks of 4k modesLespiau, Damien
v2: Fix hmdi typo (Simon Farnsworth, Ville Syrjälä) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Parse the HDMI CEA block and look for 4k modesLespiau, Damien
HDMI 1.4 adds 4 "4k x 2k" modes in the the CEA vendor specific block. With this commit, we now parse this block and expose the 4k modes that we find there. v2: Fix the "4096x2160" string (nice catch!), add comments about do_hdmi_vsdb_modes() arguments and make it clearer that offset is relative to the end of the required fields of the HDMI VSDB (Ville Syrjälä) v3: Fix 'Unknow' typo (Simon Farnsworth) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Tested-by: Cancan Feng <cancan.feng@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030 Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Fix add_cea_modes() style issuesLespiau, Damien
A few styles issues have crept in here, fix them before touching this code again. v2: constify arguments that can be (Ville Syrjälä) v3: constify, but better (Ville Syrjälä) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Don't export drm_find_cea_extension() any moreLespiau, Damien
This function is only used inside drm_edid.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-29sfc: Update copyright bannersBen Hutchings
Update the dates for files that have been added to in 2012-2013. Drop the 'Solarstorm' brand name that's still lingering here. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-30drm/i915: ivb: fix edp voltage swing reg valImre Deak
Fix the typo introduced in commit 1a2eb4604b85c5efb343da8a4dcf41288fcfca85 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message CC: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880 Tested-by: Jeremy Moles <cubicool@gmail.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-29PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when availableNeil Horman
This fixes the problem of acpiphp claiming slots that should be managed by pciehp, which may keep ExpressCard slots from working. The acpiphp driver claims PCIe slots unless the BIOS has granted us control of PCIe native hotplug via _OSC. Prior to v3.10, the acpiphp .add method (add_bridge()) was always called *after* we had requested native hotplug control with _OSC. But after 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism"), which appeared in v3.10, acpiphp initialization is done during the bus scan via the pcibios_add_bus() hook, and this happens *before* we request native hotplug control. Therefore, acpiphp doesn't know yet whether the BIOS will grant control, and it claims slots that we should be handling with native hotplug. This patch requests native hotplug control earlier, so we know whether the BIOS granted it to us before we initialize acpiphp. To avoid reintroducing the ASPM issue fixed by b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"'), we run _OSC earlier but defer the actual ASPM calls until after the bus scan is complete. Tested successfully by myself. [bhelgaas: changelog, mark for stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60736 Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.10+ CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl>
generated by cgit (git 2.34.1) at 2025-09-24 16:19:14 +0000