| Age | Commit message (Collapse) | Author |
|---|
|
PLA MCU clock speed down could only be enabled when tx/rx are disabled.
Otherwise, the packet loss may occur.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable U2P3 may miss zero packet for bulk-in.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initailization would reset runtime suspend by tp->saved_wolopts, so
the tp->saved_wolopts should be set before initializing.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When linking ON, the patch of flow control has to be reset. This
makes sure the patch works normally.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the runtime resume doesn't work normally for linking change.
1. Reset the settings and status of runtime suspend.
2. Sync the linking status.
3. Poll the linking change.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A malicious user could use RAW sockets and fool
GTP using them as standard SOCK_DGRAM UDP sockets.
BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline]
setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85
gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827
gtp_encap_enable drivers/net/gtp.c:844 [inline]
gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666
__rtnl_newlink net/core/rtnetlink.c:3305 [inline]
rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363
rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424
netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:639 [inline]
sock_sendmsg net/socket.c:659 [inline]
____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330
___sys_sendmsg net/socket.c:2384 [inline]
__sys_sendmsg+0x451/0x5f0 net/socket.c:2417
__do_sys_sendmsg net/socket.c:2426 [inline]
__se_sys_sendmsg+0x97/0xb0 net/socket.c:2424
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x441359
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0
R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144
kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline]
kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336
__alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800
alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207
alloc_pages include/linux/gfp.h:534 [inline]
alloc_slab_page+0x111/0x12f0 mm/slub.c:1511
allocate_slab mm/slub.c:1656 [inline]
new_slab+0x2bc/0x1130 mm/slub.c:1722
new_slab_objects mm/slub.c:2473 [inline]
___slab_alloc+0x1533/0x1f30 mm/slub.c:2624
__slab_alloc mm/slub.c:2664 [inline]
slab_alloc_node mm/slub.c:2738 [inline]
slab_alloc mm/slub.c:2783 [inline]
kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788
sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597
sk_alloc+0xf0/0xbe0 net/core/sock.c:1657
inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321
__sock_create+0x8eb/0xf00 net/socket.c:1420
sock_create net/socket.c:1471 [inline]
__sys_socket+0x1a1/0x600 net/socket.c:1513
__do_sys_socket net/socket.c:1522 [inline]
__se_sys_socket+0x8d/0xb0 net/socket.c:1520
__x64_sys_socket+0x4a/0x70 net/socket.c:1520
do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira <pablo@netfilter.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu
checks that we apply in do_setlink()
Otherwise malicious users can crash the kernel, for example after
an integer overflow :
BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline]
BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192
memset+0x24/0x40 mm/kasan/common.c:108
memset include/linux/string.h:365 [inline]
__alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
alloc_skb include/linux/skbuff.h:1049 [inline]
alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664
sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242
sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259
mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609
add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713
add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844
mld_send_cr net/ipv6/mcast.c:1970 [inline]
mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786
__do_softirq+0x262/0x98c kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x19b/0x1e0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61
Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79
RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54
RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000
arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690
default_idle_call+0x84/0xb0 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361
rest_init+0x23b/0x371 init/main.c:451
arch_call_rest_init+0xe/0x1b
start_kernel+0x904/0x943 init/main.c:784
x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242
The buggy address belongs to the page:
page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver for Cisco Aironet 4500 and 4800 series cards (airo.c),
implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().
The ioctl handler copies an aironet_ioctl struct from userspace, which
includes a command. Some of the commands are handled in readrids(),
where the user controlled command is converted into a driver-internal
value called "ridcode".
There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which
correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM
respectively. These commands both have checks that the user has
CAP_NET_ADMIN, with the comment that "Only super-user can read WEP
keys", otherwise they return -EPERM.
However there is another command value, AIRORRID, that lets the user
specify the ridcode value directly, with no other checks. This means
the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and
AIROGWEPKNV.
Fix it by moving the CAP_NET_ADMIN check out of the command handling
and instead do it later based on the ridcode. That way regardless of
whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed
in using AIRORID, we always do the CAP_NET_ADMIN check.
Found by Ilja by code inspection, not tested as I don't have the
required hardware.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver for Cisco Aironet 4500 and 4800 series cards (airo.c),
implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().
The ioctl handler copies an aironet_ioctl struct from userspace, which
includes a command and a length. Some of the commands are handled in
readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes.
That buffer is then passed to PC4500_readrid(), which has two cases.
The else case does some setup and then reads up to RIDSIZE bytes from
the hardware into the kmalloc()'ed buffer.
Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer:
// read the rid length field
bap_read(ai, pBuf, 2, BAP1);
// length for remaining part of rid
len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2;
...
// read remainder of the rid
rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1);
PC4500_readrid() then returns to readrids() which does:
len = comp->len;
if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) {
Where comp->len is the user controlled length field.
So if the "rid length field" returned by the hardware is < 2048, and
the user requests 2048 bytes in comp->len, we will leak the previous
contents of the kmalloc()'ed buffer to userspace.
Fix it by kzalloc()'ing the buffer.
Found by Ilja by code inspection, not tested as I don't have the
required hardware.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The optee driver uses specific page table types to verify if a memory
region is normal. These types are not defined in nommu systems. Trying
to compile the driver in these systems results in a build error:
linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’:
linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared
(first use in this function); did you mean ‘PREEMPT_MASK’?
return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
^~~~~~~~~~~~~
PREEMPT_MASK
linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is
reported only once for each function it appears in
linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared
(first use in this function)
return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC;
^~~~~~~~~~~~~~~~~~~
Make the optee driver depend on MMU to fix the compilation issue.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[jw: update commit title]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Convert suitable drivers to use new helper phy_do_ioctl_running.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Timur Tabi <timur@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200123000050.2831088-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is a spelling mistake in a dev_dbg message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Simplify the endpoint sanity check by letting core verify that the
required endpoints are present.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Use a synchronous usb_bulk_msg() when switching link speed in
set_termios(). This way we do not need to keep track of outstanding URBs
in order to be able to stop them at close.
Note that there's no need to set URB_ZERO_PACKET as the one-byte
transfer will always be short.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
switched to using the generic write implementation which may combine
multiple write requests into larger transfers. This can break the IrLAP
protocol where end-of-frame is determined using the USB short packet
mechanism, for example, if multiple frames are sent in rapid succession.
Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Cc: stable <stable@vger.kernel.org> # 2.6.35
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.
This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).
Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org> # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add missing endpoint sanity check to avoid dereferencing a NULL-pointer
on open() in case a device lacks a bulk-out endpoint.
Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using
generic framework") the oops would instead happen on open() if the
device lacked a bulk-in endpoint and on write() if it lacked a bulk-out
endpoint.
Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
phylink and phylib are interconnected. It makes sense for phylib and
phy driver patches to be also reviewed by the phylink maintainer.
So add Russell King as a designed reviewer of phylib.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend stats group array of uplink representor with all stats that are
available for PF in legacy mode, besides ipsec and TLS which are not
supported.
Don't output vport stats for uplink representor because they are already
handled by 802_3 group (with different names: {tx|rx}_{bytes|packets}_phy).
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Q counters were disabled for all types of representors to prevent an issue
where there is not enough resources to init q counters for 127 representor
instances. Enable q counters only for uplink representors to support
"rx_out_of_buffer", "rx_if_down_packets" counters in ethtool.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In order to support all of the supported stats that are available in legacy
mode for switchdev uplink representors, convert rep stats infrastructure to
reuse struct mlx5e_stats_grp that is already used when device is in legacy
mode. Refactor rep code to use array of mlx5e_stats_grp
structures (constructed using macros provided by stats infra) to
fill/update stats, instead of fixed hardcoded set of values. This approach
allows to easily extend representors with new stats types.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Don't copy all of the stats groups used for mlx5e ethernet NIC profile,
have a separate stats groups for IPoIB with the set of the needed stats
only.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Convert stats groups array to array of "stats group" pointers to allow
sharing and individual selection of groups per profile as illustrated in
the next patches.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
|
|
Introduce new macros to declare stats callbacks and groups, for better
code reuse and for individual groups selection per profile which will be
introduced in next patches.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
|
|
Attach stats groups array to the profiles and make the stats utility
functions (get_num, update, fill, fill_strings) generic and use the
profile->stats_grps rather the hardcoded NIC stats groups.
This will allow future extension to have per profile stats groups.
In this patch mlx5e NIC and IPoIB will still share the same stats
groups.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
|
|
Clean up the code and allows to call uplink rep init/cleanup
from different location later.
To be used later for a new uplink representor mode.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Allow connecting SW steering source table to a lower/same level
destination table.
Lifting this limitation is required to support Connection Tracking.
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Modify header supports ADD/SET and from this patch
also COPY. Copy allows to copy header fields and
metadata.
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Modify set actions are not supported on both tx
and rx, added a check for that.
Also refactored the code in a way that every modify
action has his own functions, this needed so in the
future we could add copy action more smoothly.
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In the flowtables offload all the devices in the flowtables
share the same flow_block. An offload rule will be installed on
all the devices. This scenario is not correct.
It is no problem if there are only two devices in the flowtable,
The rule with ingress and egress on the same device can be reject
by driver.
But more than two devices in the flowtable will install the wrong
rules on hardware.
For example:
Three devices in a offload flowtables: dev_a, dev_b, dev_c
A rule ingress from dev_a and egress to dev_b:
The rule will install on device dev_a.
The rule will try to install on dev_b but failed for ingress
and egress on the same device.
The rule will install on dev_c. This is not correct.
The flowtables offload avoid this case through restricting the ingress dev
with FLOW_DISSECTOR_KEY_META.
So the mlx5e driver also should support the FLOW_DISSECTOR_KEY_META parse.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix the following sparse warning:
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_chains.c:35:20: warning: symbol 'ESW_POOLS' was not declared. Should it be static?
Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Acked-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
since mlx5 hardware can segment correctly TSO packets on VXLAN over VLAN
topologies, CPU usage can improve significantly if we enable tunnel
offloads in dev->vlan_features, like it was done in the past with other
NIC drivers (e.g. mlx4, be2net and ixgbe).
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Use "%zu" for size_t. Seen on ARM allmodconfig:
drivers/net/ethernet/mellanox/mlx5/core/wq.c: In function 'mlx5_wq_cyc_wqe_dump':
include/linux/kern_levels.h:5:18: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events")
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Martin KaFai Lau says:
====================
This set adds bpf_cubic.c example. It was separated from the
earlier BPF STRUCT_OPS series. Some highlights since the
last post:
1. It is based on EricD recent fixes to the kernel tcp_cubic. [1]
2. The bpf jiffies reading helper is inlined by the verifier.
Different from the earlier version, it only reads jiffies alone
and does not do usecs/jiffies conversion.
3. The bpf .kconfig map is used to read CONFIG_HZ.
[1]: https://patchwork.ozlabs.org/cover/1215066/
v3:
- Remove __weak from CONFIG_HZ in patch 3. (Andrii)
v2:
- Move inlining to fixup_bpf_calls() in patch 1. (Daniel)
- It is inlined for 64 BITS_PER_LONG and jit_requested
as the map_gen_lookup(). Other cases could be
considered together with map_gen_lookup() if needed.
- Use usec resolution in bictcp_update() calculation in patch 3.
usecs_to_jiffies() is then removed(). (Eric)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a bpf_cubic example. Some highlights:
1. CONFIG_HZ .kconfig map is used.
2. In bictcp_update(), calculation is changed to use usec
resolution (i.e. USEC_PER_JIFFY) instead of using jiffies.
Thus, usecs_to_jiffies() is not used in the bpf_cubic.c.
3. In bitctcp_update() [under tcp_friendliness], the original
"while (ca->ack_cnt > delta)" loop is changed to the equivalent
"ca->ack_cnt / delta" operation.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233658.903774-1-kafai@fb.com
|
|
This patch sync uapi bpf.h to tools/.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233652.903348-1-kafai@fb.com
|
|
This patch adds a helper to read the 64bit jiffies. It will be used
in a later patch to implement the bpf_cubic.c.
The helper is inlined for jit_requested and 64 BITS_PER_LONG
as the map_gen_lookup(). Other cases could be considered together
with map_gen_lookup() if needed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233646.903260-1-kafai@fb.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
-mst: Fix SST branch device handling (Wayne)
-panfrost: Fix mapping of globally visible BO's (Boris)
Cc: Wayne Lin <Wayne.Lin@amd.com>
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122213725.GA22099@art_vandelay
|
|
The post-fork cleanup of loongson2ef from loongson64 changed
LOONGSON_CHIPCFG from a single-argument functional macro to a
non-functional macro with an mmio address in loongson2ef, but
loongson2_cpufreq still uses the notation of a functional macro call
expecting it to be an lvalue. Fixed based on loongson_suspend_enter.
Signed-off-by: Alexandre Oliva <lxoliva@fsfla.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the irtl_ns_units[] definition into irtl_2_usec() which is the
only user of it, use div_u64() for the division in there (as the
divisor is small enough) and use the NSEC_PER_USEC symbol for the
divisor. Also convert the irtl_2_usec() comment to a proper
kerneldo one.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move intel_idle_verify_cstate(), auto_demotion_disable() and
c1e_promotion_disable() closer to their callers.
While at it, annotate intel_idle_verify_cstate() with __init,
as it is only used during the initialization of the driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Annotate the functions that are only used at the initialization time
with __init and the data structures used by them with __initdata or
__initconst.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move intel_idle_cpuidle_devices_uninit() closer to its caller,
intel_idle_init(), add the __init modifier to its header, drop a
redundant local variable from it and fix up its kerneldoc comment.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that intel_idle_state_table_update() only needs to be called
if icpu is not NULL, so fold it into intel_idle_init_cstates_icpu(),
and pass a pointer to the driver object to
intel_idle_cpuidle_driver_init() as an argument instead of
referencing it locally in there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of comparing intel_idle_cpuidle_devices with NULL apply
the "!" (not) operator to it when checking it against NULL.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no particular reason why intel_idle_probe() needs to be
a separate function and folding it into intel_idle_init() causes
the code to be somewhat easier to follow, so do just that.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The __setup_broadcast_timer() static function is only called in one
place and "true" is passed to it as the argument in there, so
effectively it is a wrapper arround tick_broadcast_enable().
To simplify the code, call tick_broadcast_enable() directly instead
of __setup_broadcast_timer() and drop the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge changes updating the ACPI processor driver in order to export
acpi_processor_evaluate_cst() to the code outside of it and adding
ACPI support to the intel_idle driver based on that.
* intel_idle+acpi:
Documentation: admin-guide: PM: Add intel_idle document
intel_idle: Use ACPI _CST on server systems
intel_idle: Add module parameter to prevent ACPI _CST from being used
intel_idle: Allow ACPI _CST to be used for selected known processors
cpuidle: Allow idle states to be disabled by default
intel_idle: Use ACPI _CST for processor models without C-state tables
intel_idle: Refactor intel_idle_cpuidle_driver_init()
ACPI: processor: Export acpi_processor_evaluate_cst()
ACPI: processor: Make ACPI_PROCESSOR_CSTATE depend on ACPI_PROCESSOR
ACPI: processor: Clean up acpi_processor_evaluate_cst()
ACPI: processor: Introduce acpi_processor_evaluate_cst()
ACPI: processor: Export function to claim _CST control
|
