summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-23netfilter: nf_tables: GC transaction race with abort pathPablo Neira Ayuso
Abort path is missing a synchronization point with GC transactions. Add GC sequence number hence any GC transaction losing race will be discarded. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-23netfilter: nf_tables: flush pending destroy work before netlink notifierPablo Neira Ayuso
Destroy work waits for the RCU grace period then it releases the objects with no mutex held. All releases objects follow this path for transactions, therefore, order is guaranteed and references to top-level objects in the hierarchy remain valid. However, netlink notifier might interfer with pending destroy work. rcu_barrier() is not correct because objects are not release via RCU callback. Flush destroy work before releasing objects from netlink notifier path. Fixes: d4bc8271db21 ("netfilter: nf_tables: netlink notifier might race to release objects") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-23netfilter: nf_tables: validate all pending tablesFlorian Westphal
We have to validate all tables in the transaction that are in VALIDATE_DO state, the blamed commit below did not move the break statement to its right location so we only validate one table. Moreover, we can't init table->validate to _SKIP when a table object is allocated. If we do, then if a transcaction creates a new table and then fails the transaction, nfnetlink will loop and nft will hang until user cancels the command. Add back the pernet state as a place to stash the last state encountered. This is either _DO (we hit an error during commit validation) or _SKIP (transaction passed all checks). Fixes: 00c320f9b755 ("netfilter: nf_tables: make validation state per table") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de>
2023-08-23wifi: ath11k: simplify the code with module_platform_driverYang Yingliang
The init/exit() of driver only calls platform_driver_register/unregister, it can be simpilfied with module_platform_driver. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230804091255.1347178-1-yangyingliang@huawei.com
2023-08-23wifi: ath12k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-3-8e2698759564@quicinc.com
2023-08-23wifi: ath11k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-2-8e2698759564@quicinc.com
2023-08-23wifi: ath10k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-1-8e2698759564@quicinc.com
2023-08-23wifi: ath11k: Consistently use ath11k_vif_to_arvif()Jeff Johnson
Helper function ath11k_vif_to_arvif() exists to retrieve a struct ath11k_vif from a struct ieee80211_vif. However, in multiple places this logic is open-coded with inline typecasting. Since the typecasting prevents the compiler from type-checking the source and destination, update the driver to consistently use the helper function. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230821-ath11k_vif_to_arvif-v1-1-fa2c3b60b5cf@quicinc.com
2023-08-23wifi: ath11k: Cleanup mac80211 references on failure during tx_completeSven Eckelmann
When a function is using functions from mac80211 to free an skb then it should do it consistently and not switch to the generic dev_kfree_skb_any (or similar functions). Otherwise (like in the error handlers), mac80211 will will not be aware of the freed skb and thus not clean up related information in its internal data structures. Not doing so lead in the past to filled up structure which then prevented new clients to connect. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-2-c0af729d6229@narfation.org
2023-08-23wifi: ath11k: Don't drop tx_status when peer cannot be foundSven Eckelmann
When a station idles for a long time, hostapd will try to send a QoS Null frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this purpose. And the skb will be added to ack_status_frame - waiting for a completion via ieee80211_report_ack_skb(). But when the peer was already removed before the tx_complete arrives, the peer will be missing. And when using dev_kfree_skb_any (instead of going through mac80211), the entry will stay inside ack_status_frames. This IDR will therefore run full after 8K request were generated for such clients. At this point, the access point will then just stall and not allow any new clients because idr_alloc() for ack_status_frame will fail. ieee80211_free_txskb() on the other hand will (when required) call ieee80211_report_ack_skb() and make sure that (when required) remove the entry from the ack_status_frame. Tested-on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode") Fixes: 94739d45c388 ("ath11k: switch to using ieee80211_tx_status_ext()") Cc: stable@vger.kernel.org Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org
2023-08-23ASoC: dwc: i2s: Add StarFive JH7110 SoC supportXingyu Wu
Add StarFive JH7110(TX0/TX1/RX channels) SoC support in the designware I2S driver and a flag to check if it is on the JH7110 SoC. These channels need to enable clocks, resets and syscon register on the JH7110 SoC. So add init ops in platform data for the JH7110 SoC to do this. Their resets should be deassert before changing the parent of clocks so these are done in the init ops of platform data. The I2S controllers use DMA controller by platform data on the JH7110 and their settings about snd_dmaengine_dai_dma_data() should be added in the dw_configure_dai_by_pd(). And use dmaengine PCM registration if these do not have IRQ on the JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Link: https://lore.kernel.org/r/20230821144151.207339-4-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dwc: Use ops to get platform dataXingyu Wu
Use of_device_get_match_data() to get platform data. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Link: https://lore.kernel.org/r/20230821144151.207339-3-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dt-bindings: snps,designware-i2s: Add StarFive JH7110 SoC supportXingyu Wu
Add the StarFive JH7110 (TX0/TX1/RX channel) SoC support in the bindings of Designware I2S controller. The I2S controller needs two reset items to work properly on the JH7110 SoC. And TX0 channel as master mode needs 5 clock items and TX1/RX channels as slave mode need 9 clock items on the JH7110 SoC. The RX channel needs System Register Controller property to enable it and other platforms do not need it. Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230821144151.207339-2-xingyu.wu@starfivetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: setup BRGCKR/BRRA/BRRB on rsnd_adg_clk_control()Kuninori Morimoto
Current adg.c will configure BRGCKR/BRRA/BRRB to output clock when it start sound. OTAH, rsnd_adg_clk_enable() will enables clk_a/b/c when driver was probed. But it is strange, these should be set in the same time. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87h6oqzlei.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: remove default division of clock outKuninori Morimoto
Current adg has default division for BRRA/BRRB, but it was created at very beginning of the driver implementation, and is now an unnecessary settings. Because it has this default division, unexpected clockout might be selected. For example if it requests only 44.1kHz base clockout, unrequested 48kHz base clockout also will be selected. This patch remove default division of clock out Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87il96zlep.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: tidyup brga/brgb default valueKuninori Morimoto
default value for brga/brgb should be 0xff instead of 0x2. This patch tidyup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87jztmzlew.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: setup clock-out only when all conditions are rightKuninori Morimoto
Current adg.c doesn't assume that requested clock out divide condition doesn't match. In such case, it will indicate strange message, and will register NULL clock, etc. It is just a DT setting miss, but is confusable. This patch check all conditions for it. Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lee2zlf7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: rsnd: enable clk_i approximate rate usageKuninori Morimoto
Basically Renesas sound ADG is assuming that it has accurately divisible input clock. But sometimes / some board might not have it. The clk_i from CPG is used for such case. It can't calculate accurate division, but can be used as approximate rate. This patch enable clk_i for such case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Adnan Ali <adnan.ali@bp.renesas.com> Tested-by: Vincenzo De Michele <vincenzo.michele@davinci.de> Tested-by: Patrick Keil <patrick.keil@conti-engineering.com> Link: https://lore.kernel.org/r/87msyizlfd.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23s390/pci: use builtin_misc_device macro to simplify the codeLi Zetao
Use the builtin_misc_device macro to simplify the code, which is the same as declaring with device_initcall(). Signed-off-by: Li Zetao <lizetao1@huawei.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230815080833.1103609-1-lizetao1@huawei.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-23Merge branch 'vfio-ap' into featuresHeiko Carstens
Tony Krowiak says: =================== This patch series is for the changes required in the vfio_ap device driver to facilitate pass-through of crypto devices to a secure execution guest. In particular, it is critical that no data from the queues passed through to the SE guest is leaked when the guest is destroyed. There are also some new response codes returned from the PQAP(ZAPQ) and PQAP(TAPQ) commands that have been added to the architecture in support of pass-through of crypto devices to SE guests; these need to be accounted for when handling the reset of queues. =================== Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-23pinctrl: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the placement of SPDX identifier in pinctrl-meson-axg files: WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230823085546.116494-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-08-23ASoC: nau8821: Improve AMIC recording performance.Seven Lee
Since the hardware may be designed as a single-ended input, the headset mic record only supports single-ended input on the left side. This patch will enhance microphone recording performance for single-end. Signed-off-by: Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20230823071244.1861487-2-wtli@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: dt-bindings: nau8821: Add single-ended input featureSeven Lee
Add input with single-ended control. Signed-off-by: Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20230823071244.1861487-1-wtli@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: Delete UDA134x/L3 audio codecLinus Walleij
This codec was used by the deleted S3C board sound/soc/samsung/s3c24xx_uda134x.c. Fixes: 503278c12701 ("ASoC: samsung: remove unused drivers") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230822-delete-l3-v2-1-b3ffc07348af@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: clear dsp to host interrupt statusVijendar Mukunda
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be accessed by both ACP firmware and driver. This register contains register bits corresponds to host to dsp interrupts and vice versa. when dsp to host interrupt is reported, only clear dsp to host interrupt bit in DSP_SW_INTR_STAT_OFFSET. Fixes: 2e7c6652f9b8 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP") Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: clear panic mask status when panic occursVijendar Mukunda
Due to scratch memory persistence, Once the DSP panic is reported, need to clear the panic mask after handling DSP panic. Otherwise, It results in DSP panic on next reboot. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: add conditional check for acp_clkmux_sel registerVijendar Mukunda
Few AMD platforms require ACP ACLK as clock source. Add conditional check for clock mux selection register for switching between internal clock and ACP ACLK. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-5-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: remove redundant clock mux selection register writeVijendar Mukunda
ACP clock mux selection register is already programmed during acp init sequence. Remove the redundant register write. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-4-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: add module parameter for firmware debugVijendar Mukunda
Add module parameter for firmware debug. If firmware debug flag is enabled, clear the fusion stall bit which is required for enabling firmware debugging through JTAG. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-3-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: enable ACP external global interruptVijendar Mukunda
Previously ACP SOF firmware used to enable the ACP external global interrupt register. This will restrict to report ACP host interrupts only after firmware loading is successful. This register needs to be set from host driver to handle other ACP interrupts(SoundWire Interrupts) before loading the ACP firmware. Add field for external interrupt enable register in acp descriptor structure and enable the external interrupt enable register. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: SOF: amd: remove unused sha dma interrupt codeVijendar Mukunda
During initial development time for RN platform, when SHA dma gets completed, SHA DMA engine used to raise the ACP interrupt. In ACP interrupt handler, SHA DMA interrupt got handled. Currently SHA DMA compleition is verified by checking transfer count using read poll time out logic. Remove unused SHA dma interrupt handling code. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23ASoC: cs35l41: Correct amp_gain_tlv valuesCharles Keepax
The current analog gain TLV seems to have completely incorrect values in it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute value, correct the control to match. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230823085308.753572-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-23wifi: wilc1000: Remove unused declarationsYue Haibing
Commit 8399918f3056 ("staging: wilc1000: use RCU list to maintain vif interfaces list") removed wilc_get_interface() but not its declaration. Commit 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces") declared but never implemented wilc_cfg_alloc() and wilc_netdev_interface(). Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230819102100.13720-1-yuehaibing@huawei.com
2023-08-23wifi: mwifiex: avoid possible NULL skb pointer dereferenceDmitry Antipov
In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling") Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
2023-08-23wifi: rt2x00: limit MT7620 TX power based on eeprom calibrationShiji Yang
In the vendor driver, the current channel power is queried from EEPROM_TXPOWER_BG1 and EEPROM_TXPOWER_BG2. And then the mixed value will be written into the low half-word of the TX_ALC_CFG_0 register. The high half-word of the TX_ALC_CFG_0 is a fixed value 0x2f2f. We can't get the accurate TX power. Based on my tests and the new MediaTek mt76 driver source code, the real TX power is approximately equal to channel_power + (max) rate_power. Usually max rate_power is the gain of the OFDM 6M rate, which can be readed from the offset EEPROM_TXPOWER_BYRATE +1. Based on these eeprom values, this patch adds basic TX power control for the MT7620 and limits its maximum TX power. This can avoid the link speed decrease caused by chip overheating. rt2800_config_alc() function has also been renamed to rt2800_config_alc_rt6352() because it's only used by RT6352 (MT7620). Notice: It's still need some work to sync the max channel power to the user interface. This part is missing from the rt2x00 driver framework. If we set the power exceed the calibration value, it won't take effect. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB03159090ED14044215E59FD6BC10A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-08-23wifi: wfx: Use devm_kmemdup to replace devm_kmalloc + memcpyLi Zetao
Use the helper function devm_kmemdup() rather than duplicating its implementation, which helps to enhance code readability. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230810114939.2104013-1-lizetao1@huawei.com
2023-08-23Merge tag 'vfs-6.6-merge-3' of ↵Christian Brauner
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs online fsck update from Darrick Wong: New code for 6.6: * Allow the kernel to initiate a freeze of a filesystem. The kernel and userspace can both hold a freeze on a filesystem at the same time; the freeze is not lifted until /both/ holders lift it. This will enable us to fix a longstanding bug in XFS online fsck. * Use kernel-initated fsfreeze to fix some longstanding false negatives in online fsck of the free space and inode counters. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Message-Id: <20230822182604.GB11286@frogsfrogsfrogs> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-23wifi: rsi: rsi_91x_usb_ops: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_91x_usbdev *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073606.3667062-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_usb: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_91x_usbdev *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073558.3666936-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_sdio_ops: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_91x_sdiodev *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073550.3666829-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_sdio: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_91x_sdiodev *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073539.3666735-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_main: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_common *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073529.3666653-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_mac80211: Remove unnecessary conversionsWu Yunchuan
No need cast (struct rsi_hw *) to (struct rsi_hw *), or cast (struct rsi_common *) to (struct rsi_common *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073517.3666559-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_hal: Remove unnecessary conversionsWu Yunchuan
No need cast (struct rsi_hw *) to (struct rsi_hw *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073507.3666471-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_debugfs: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_91x_sdiodev *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073455.3666306-1-yunchuan@nfschina.com
2023-08-23wifi: rsi: rsi_91x_coex: Remove unnecessary (void*) conversionsWu Yunchuan
No need cast (void*) to (struct rsi_coex_ctrl_block *) or (struct rsi_common *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230803073440.3666204-1-yunchuan@nfschina.com
2023-08-23Merge tag 'vfs-6.6-merge-2' of ↵Christian Brauner
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux Pull filesystem freezing updates from Darrick Wong: New code for 6.6: * Allow the kernel to initiate a freeze of a filesystem. The kernel and userspace can both hold a freeze on a filesystem at the same time; the freeze is not lifted until /both/ holders lift it. This will enable us to fix a longstanding bug in XFS online fsck. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Message-Id: <20230822182604.GB11286@frogsfrogsfrogs> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-23ibmveth: Use dcbf rather than dcbflMichael Ellerman
When building for power4, newer binutils don't recognise the "dcbfl" extended mnemonic. dcbfl RA, RB is equivalent to dcbf RA, RB, 1. Switch to "dcbf" to avoid the build error. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()Andrii Staikov
Add check for pf->vf not being NULL before dereferencing pf->vf[vsi->vf_id] in updating VSI filter sync. Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted in the condition for clearing promisc mode bit. Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning") Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-23bnxt: use the NAPI skb allocation cacheJakub Kicinski
All callers of build_skb() (*) in bnxt are in NAPI context. The budget checking is somewhat convoluted because in the shared completion queue cases Rx packets are discarded by netpoll by forcing an error (E). But that happens before skb allocation. Only a call chain starting at __bnxt_poll_work() can lead to an skb allocation and it checks budget (b). * bnxt_rx_multi_page_skb * bnxt_rx_skb ` bp->rx_skb_func * bnxt_tpa_end ` bnxt_rx_pkt E bnxt_force_rx_discard E bnxt_poll_nitroa0 b __bnxt_poll_work Use napi_build_skb() to take advantage of the skb cache. In iperf tests with HW-GRO enabled it barely makes a difference but in cases where HW-GRO is not as effective (or disabled) it can give even a >10% boost (20.7Gbps -> 23.1Gbps). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 16:58:29 +0000