summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-08mac80211: destroy virtual monitor interface across suspendJohannes Berg
It has to be removed from the driver, but completely destroying it helps handle unplug of a device during suspend since then the channel context handling etc. doesn't have to happen later when it's removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: purge remain-on-channel items when suspendingJohannes Berg
They can't really be executed while suspended and could trigger work warnings, so abort all ROC items. When the system resumes the notifications about this will be delivered to userspace which can then act accordingly (though it will assume they were canceled/finished.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: remove outdated comment referring to master interfaceJohannes Berg
The code now explicitly calls ieee80211_configure_filter() anyway, so nothing needs to be explained. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: return new mpath from mesh_path_add()Bob Copeland
Most times that mesh_path_add() is called, it is followed by a lookup to get the just-added mpath. We can instead just return the new mpath in the case that we allocated one (or the existing one if already there), so do that. Also, reorder the code in mesh_path_add a bit so that we don't need to allocate in the pre-existing case. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: fix the PREP mesh hwmp debug messageChun-Yeow Yeoh
The mesh hwmp debug message is a bit confusing. The "sending PREP to %p" should be the MAC address of mesh STA that has originated the PREQ message and the "received PREP from %pM" should be the MAC address of the mesh STA that has originated the PREP message. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: parse Timeout Interval Element using a structJohannes Berg
Instead of open-coding the accesses and length check do the length check in the IE parser and assign a struct pointer for use in the remaining code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: check ERP info IE length in parserJohannes Berg
It's always just one byte, so check for that and remove the length field from the parser struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: check DSSS params IE length in parserJohannes Berg
It's always just one byte, so check for that and remove the length field from the parser struct. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: remove unused IE pointers from parserJohannes Berg
There's no need to parse IEs that aren't used so just remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: remove ancient reference to master interfaceJohannes Berg
The master interface no longer exists ... and hasn't for a few years now, so remove this reference :-) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: be more careful about sending beacon-loss-eventsBen Greear
I don't think we should send the events unless it was actually a beacon that was lost...not just any probe of an AP. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: add beacon stats to debugfsBen Greear
Beacon-timeout and number of beacon loss events. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211_hwsim: advertise VHT support also when channels == 1Karl Beldan
Drivers can now advertise VHT support even if they don't use channel contexts. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08mac80211: let drivers not supporting channel contexts use VHTKarl Beldan
It is possible since the global hw config and local switched to cfg80211_chan_def. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: rename iwl_mvm_new_bt_coex_notifEmmanuel Grumbach
It actually handles a BT coex notification, so rename it to be more self explained. Also, this function can always look at mvm->last_bt_notif provided that the latter is updated on time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: clean up invalid station handlingEmmanuel Grumbach
Using IWL_MVM_STATION_COUNT and IWL_INVALID_STATION together isn't a good idea as they have different values. Always use IWL_MVM_STATION_COUNT for an invalid station in MVM and move the definition of the IWL_INVALID_STATION constant into the DVM driver to avoid making such mistakes again. The one use in the transport code can be hard-coded to -1 instead as the station ID is passed as an integer there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: add new pci id for 6x35 seriesShuduo Sang
some new thinkpad laptops use intel chip with new pci id need be added lspci -vnn output: Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088f] (rev 24) Subsystem: Intel Corporation Device [8086:5260] Signed-off-by: Shuduo Sang <sangshuduo@gmail.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: beautify code in BT CoexEmmanuel Grumbach
The iterators don't need to know what bt_kill_msk means. All they need to know is if reduced Tx power is enabled on an interface or not. So change the member of the iterator to be a bool. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: Sync FW API time event notification changeIlan Peer
The firmware API changed to differentiate between event and fragment start/end. Change the time-event handling accordingly. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: sleep for at least 10 secondsJohannes Berg
Many platforms have issues processing a wakeup signal while they're still suspending, and will ignore it. Since our device thinks it woke the platform, and the platform ignored the signal, it will sleep without WoWLAN being enabled as the device disables WoWLAN when having woken the platform. Resolve this by making the device wait for 10 seconds after getting the suspend signal before waking up the platform. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: print opmode when firmware is loadedJohannes Berg
Print the sub-driver (opmode, i.e. DVM or MVM) when the firmware is loaded. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: remove redundant iwl_power_get_params()Alexander Bondar
The function just wraps an existing one, remove it. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: change active-to-powersave transition time for BPSAlexander Bondar
The requirement for TX/RX active to powersave transition time for the Balanced Power Save (BPS) scheme changed. Change the driver accordingly and set transition time to 100 msec. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: encapsulate power table command log messageAlexander Bondar
Encapsulate the power table command logging in a separate function to print the same information in both cases. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: set keepalive period regardless of PM stateAlexander Bondar
The firmware starts sending nulldata frames for keepalive immediately after association, regardless of power management state. The driver thus needs to configure keep alive period unconditionally. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: always send power table commandAlexander Bondar
The driver distinguishes between power management and device's power down enablement. Power management enablement depends both on driver's module power parameters and mac80211 decision. The device's power down depends only on driver's module power parameters. Change the driver to always send Power Table command to enable or disable both power management and device's power down. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: Fix active-to-powersave transition time unitsAlexander Bondar
Active to power save mode transition time for TX/RX in the power table command is in microseconds, fix the units in the driver. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: don't disable power management due to P2P deviceAlexander Bondar
Currently power management is supported only when only a single virtual interface is present. The driver verifies number of created interfaces and disables power management when multiple interfaces present. However, this rule does not extend to a P2P device that is handled differently in the firmware. If a P2P device is added power management can remain enabled. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: Rename some power management definitions and methodsAlexander Bondar
Replace SLEEP_OVER_DTIM by SKIP_OVER_DTIM. Add iwl_mvm prefix to a function name. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: downgrade to old power management APIAlexander Bondar
Current available FW still doesn't support new PM API. Therefore, to enable basic power management with the existing firmware, change the API in the driver back to the API used in the current firmware. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: remove BT Coex constraints upon roaming to A bandEmmanuel Grumbach
When we roam to A band, we don't need to constraint WiFi any more since it is operating on a different band. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: implement reduced Tx powerEmmanuel Grumbach
This allows to have better wifi TPT when BT is active under good RSSI conditions. Wifi will have better chance to send Acks and Cts even if BT is active. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03iwlwifi: mvm: add per-interface debugfs with mac_params fileJohannes Berg
Use the per-interface debugfs infrastructure to create a directory and symlink, and add a file containing debug data related to each virtual interface. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03brcmfmac: enable sk_buff queueing when credits depleteArend van Spriel
Firmware provides the driver with credits used to transmit packets to the firmware. When credits run out the packets should be queued and dequeued when receiving creditback signals from the firmware. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: no flow-control tlv signals when fcmode is NONEArend van Spriel
The fcmode provided by module parameter defaults to NONE, which means no flow-control is required. In this case flow-control signals should not be enabled. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: only allocate firmware-signalling resources if requiredArend van Spriel
Bail out of brcmf_fws_init() when no firmware-signalling is asked for. Need to take this into account in brcmf_fws_deinit() as well. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: move brcmf_fws_{de,}init() functionsArend van Spriel
The functions are moved in preparation of later patches. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: correct specified length from FIFOCREDITBACK signalArend van Spriel
The length is not according specification so better fix it. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: initialize struct brcmf_fws_info fields before iovarArend van Spriel
If iovar to the firmware fails the firmware-signalling module does a cleanup for which it needs pointer to struct brcmf_pub, which it gets from struct brcmf_fws_info::drvr. Assign this field before doing the tlv iovar. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add dedicated log level for low-level sdio debuggingArend van Spriel
The low-level sdio code has a large number of trace and info messages that are mostly useful looking into bus specific issues. For tracing higher-level driver functions it is better to have a dedicated level for low-level sdio debugging. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: Ia424ff18d9033b97aeffc248358e50c51805e815 Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/74 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: avoid error output on header only packetPiotr Haber
During SDIO layer flow control signalling firmware can issue invalid packets. Prevent printing of parsing errors in such case. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: avoid error output in receive pathArend van Spriel
Parsing the tlv upon receiving frames can fail. Instead of printing an error message, just count the parse failure. On some devices we receive a lot of invalid tlv signals. this commit will be squashed. Signed-off-by: Arend van Spriel <arend@broadcom.com> Change-Id: I08e0f62c55e5028f9aa70c396d291679abd273c9 Reviewed-on: http://lb-bun-88.bun.broadcom.com:8080/72 Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: fix handling sk_buff cleanup upon bus tx failureArend van Spriel
When firmware-signalling is active the brcmf_txcomplete() does a free of the sk_buff when transfer to firmware fails in the bus-specific driver code. However, it should also cleanup the packet from the hanger. This patch fixes that. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: enable tx status signallingArend van Spriel
Enabling the tx status signalling, which requires packet tagging before sending to the firmware and handling the tx status signal. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add flow-control mode to firmware signallingArend van Spriel
Upcoming patches will add firmware signalled flow control. Prepare by adding the mode, which defaults to disable it. The mode can be queried by brcmf_fws_fc_active() and set by a module parameter. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add optional bus callback definition for tx queue cleanupArend van Spriel
Add a callback to obtain packet queue from the bus-specific code used to cleanup packet buffers from firmware-signalling code. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add firmware-signalling hanger functionsArend van Spriel
The hanger for firmware-signalling is used to retain information for outstanding transmit packets that await tx status. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: perform filtered firmware-signalling cleanup upon DEL_IFArend van Spriel
When an interface is deleted make sure to cleanup all packet buffers related to that interface. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: add definitions for handling sk_buff control buffer dataArend van Spriel
The sk_buff structure contains a control buffer that can be used by different layers in the networking stack for holding packet associated information. In brcmfmac it is used to hold firmware signalling related information. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-03brcmfmac: allow stopping netif queue for different reasonsArend van Spriel
Currently, the netif queue is only stopped when the bus interface is giving a push back. This will change soon so prepare the driver by adding a stop reason and stop/resume the queue accordingly. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-30 10:45:50 +0000